[PATCH 5.15 088/137] sky2: Make sure there is at least one frag_addr available

[PATCH 5.15 088/137] sky2: Make sure there is at least one frag_addr available

[Greg Kroah-Hartman]

5.15-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Kees Cook <keescook@chromium.org>

[ Upstream commit 6a70e5cbedaf8ad10528ac9ac114f3ec20f422df ]

In the pathological case of building sky2 with 16k PAGE_SIZE, the
frag_addr[] array would never be used, so the original code was correct
that size should be 0. But the compiler now gets upset with 0 size arrays
in places where it hasn't eliminated the code that might access such an
array (it can't figure out that in this case an rx skb with fragments
would never be created). To keep the compiler happy, make sure there is
at least 1 frag_addr in struct rx_ring_info:

   In file included from include/linux/skbuff.h:28,
                    from include/net/net_namespace.h:43,
                    from include/linux/netdevice.h:38,
                    from drivers/net/ethernet/marvell/sky2.c:18:
   drivers/net/ethernet/marvell/sky2.c: In function 'sky2_rx_unmap_skb':
   include/linux/dma-mapping.h:416:36: warning: array subscript i is outside array bounds of 'dma_addr_t[0]' {aka 'long long unsigned int[]'} [-Warray-bounds=]
     416 | #define dma_unmap_page(d, a, s, r) dma_unmap_page_attrs(d, a, s, r, 0)
         |                                    ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
   drivers/net/ethernet/marvell/sky2.c:1257:17: note: in expansion of macro 'dma_unmap_page'
    1257 |                 dma_unmap_page(&pdev->dev, re->frag_addr[i],
         |                 ^~~~~~~~~~~~~~
   In file included from drivers/net/ethernet/marvell/sky2.c:41:
   drivers/net/ethernet/marvell/sky2.h:2198:25: note: while referencing 'frag_addr'
    2198 |         dma_addr_t      frag_addr[ETH_JUMBO_MTU >> PAGE_SHIFT];
         |                         ^~~~~~~~~

With CONFIG_PAGE_SIZE_16KB=y, PAGE_SHIFT == 14, so:

  #define ETH_JUMBO_MTU   9000

causes "ETH_JUMBO_MTU >> PAGE_SHIFT" to be 0. Use "?: 1" to solve this build warning.

Cc: Mirko Lindner <mlindner@marvell.com>
Cc: Stephen Hemminger <stephen@networkplumber.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Paolo Abeni <pabeni@redhat.com>
Cc: netdev@vger.kernel.org
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202309191958.UBw1cjXk-lkp@intel.com/
Reviewed-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/marvell/sky2.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/marvell/sky2.h b/drivers/net/ethernet/marvell/sky2.h
index ddec1627f1a7b..8d0bacf4e49cc 100644
--- a/drivers/net/ethernet/marvell/sky2.h
+++ b/drivers/net/ethernet/marvell/sky2.h
@@ -2195,7 +2195,7 @@ struct rx_ring_info {
 	struct sk_buff	*skb;
 	dma_addr_t	data_addr;
 	DEFINE_DMA_UNMAP_LEN(data_size);
-	dma_addr_t	frag_addr[ETH_JUMBO_MTU >> PAGE_SHIFT];
+	dma_addr_t	frag_addr[ETH_JUMBO_MTU >> PAGE_SHIFT ?: 1];
 };
 
 enum flow_control {
-- 
2.40.1

[PATCH 5.15 136/137] Bluetooth: hci_sock: Correctly bounds check and pad HCI_MON_NEW_INDEX name

[Greg Kroah-Hartman]

5.15-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Kees Cook <keescook@chromium.org>

commit cb3871b1cd135a6662b732fbc6b3db4afcdb4a64 upstream.

The code pattern of memcpy(dst, src, strlen(src)) is almost always
wrong. In this case it is wrong because it leaves memory uninitialized
if it is less than sizeof(ni->name), and overflows ni->name when longer.

Normally strtomem_pad() could be used here, but since ni->name is a
trailing array in struct hci_mon_new_index, compilers that don't support
-fstrict-flex-arrays=3 can't tell how large this array is via
__builtin_object_size(). Instead, open-code the helper and use sizeof()
since it will work correctly.

Additionally mark ni->name as __nonstring since it appears to not be a
%NUL terminated C string.

Cc: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Cc: Edward AD <twuufnxlz@gmail.com>
Cc: Marcel Holtmann <marcel@holtmann.org>
Cc: Johan Hedberg <johan.hedberg@gmail.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Paolo Abeni <pabeni@redhat.com>
Cc: linux-bluetooth@vger.kernel.org
Cc: netdev@vger.kernel.org
Fixes: 18f547f3fc07 ("Bluetooth: hci_sock: fix slab oob read in create_monitor_event")
Link: https://lore.kernel.org/lkml/202310110908.F2639D3276@keescook/
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 include/net/bluetooth/hci_mon.h |    2 +-
 net/bluetooth/hci_sock.c        |    3 ++-
 2 files changed, 3 insertions(+), 2 deletions(-)

--- a/include/net/bluetooth/hci_mon.h
+++ b/include/net/bluetooth/hci_mon.h
@@ -56,7 +56,7 @@ struct hci_mon_new_index {
 	__u8		type;
 	__u8		bus;
 	bdaddr_t	bdaddr;
-	char		name[8];
+	char		name[8] __nonstring;
 } __packed;
 #define HCI_MON_NEW_INDEX_SIZE 16
 
--- a/net/bluetooth/hci_sock.c
+++ b/net/bluetooth/hci_sock.c
@@ -438,7 +438,8 @@ static struct sk_buff *create_monitor_ev
 		ni->type = hdev->dev_type;
 		ni->bus = hdev->bus;
 		bacpy(&ni->bdaddr, &hdev->bdaddr);
-		memcpy(ni->name, hdev->name, strlen(hdev->name));
+		memcpy_and_pad(ni->name, sizeof(ni->name), hdev->name,
+			       strnlen(hdev->name, sizeof(ni->name)), '\0');
 
 		opcode = cpu_to_le16(HCI_MON_NEW_INDEX);
 		break;