[PATCH AUTOSEL 6.1 18/30] atm: iphase: Do PCI error checks on own line

[PATCH AUTOSEL 6.1 18/30] atm: iphase: Do PCI error checks on own line

[Sasha Levin]

From: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>

[ Upstream commit c28742447ca9879b52fbaf022ad844f0ffcd749c ]

In get_esi() PCI errors are checked inside line-split "if" conditions (in
addition to the file not following the coding style). To make the code in
get_esi() more readable, fix the coding style and use the usual error
handling pattern with a separate variable.

In addition, initialization of 'error' variable at declaration is not
needed.

No functional changes intended.

Link: https://lore.kernel.org/r/20230911125354.25501-4-ilpo.jarvinen@linux.intel.com
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/atm/iphase.c | 20 +++++++++++---------
 1 file changed, 11 insertions(+), 9 deletions(-)

diff --git a/drivers/atm/iphase.c b/drivers/atm/iphase.c
index 3241486869530..9bba8f280a4d4 100644
--- a/drivers/atm/iphase.c
+++ b/drivers/atm/iphase.c
@@ -2291,19 +2291,21 @@ static int get_esi(struct atm_dev *dev)
 static int reset_sar(struct atm_dev *dev)  
 {  
 	IADEV *iadev;  
-	int i, error = 1;  
+	int i, error;
 	unsigned int pci[64];  
 	  
 	iadev = INPH_IA_DEV(dev);  
-	for(i=0; i<64; i++)  
-	  if ((error = pci_read_config_dword(iadev->pci,  
-				i*4, &pci[i])) != PCIBIOS_SUCCESSFUL)  
-  	      return error;  
+	for (i = 0; i < 64; i++) {
+		error = pci_read_config_dword(iadev->pci, i * 4, &pci[i]);
+		if (error != PCIBIOS_SUCCESSFUL)
+			return error;
+	}
 	writel(0, iadev->reg+IPHASE5575_EXT_RESET);  
-	for(i=0; i<64; i++)  
-	  if ((error = pci_write_config_dword(iadev->pci,  
-					i*4, pci[i])) != PCIBIOS_SUCCESSFUL)  
-	    return error;  
+	for (i = 0; i < 64; i++) {
+		error = pci_write_config_dword(iadev->pci, i * 4, pci[i]);
+		if (error != PCIBIOS_SUCCESSFUL)
+			return error;
+	}
 	udelay(5);  
 	return 0;  
 }  
-- 
2.42.0

[PATCH AUTOSEL 6.1 20/30] scsi: libfc: Fix potential NULL pointer dereference in fc_lport_ptp_setup()

[Sasha Levin]

From: Wenchao Hao <haowenchao2@huawei.com>

[ Upstream commit 4df105f0ce9f6f30cda4e99f577150d23f0c9c5f ]

fc_lport_ptp_setup() did not check the return value of fc_rport_create()
which can return NULL and would cause a NULL pointer dereference. Address
this issue by checking return value of fc_rport_create() and log error
message on fc_rport_create() failed.

Signed-off-by: Wenchao Hao <haowenchao2@huawei.com>
Link: https://lore.kernel.org/r/20231011130350.819571-1-haowenchao2@huawei.com
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/scsi/libfc/fc_lport.c | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/drivers/scsi/libfc/fc_lport.c b/drivers/scsi/libfc/fc_lport.c
index 9c02c9523c4d4..ab06e9aeb613e 100644
--- a/drivers/scsi/libfc/fc_lport.c
+++ b/drivers/scsi/libfc/fc_lport.c
@@ -241,6 +241,12 @@ static void fc_lport_ptp_setup(struct fc_lport *lport,
 	}
 	mutex_lock(&lport->disc.disc_mutex);
 	lport->ptp_rdata = fc_rport_create(lport, remote_fid);
+	if (!lport->ptp_rdata) {
+		printk(KERN_WARNING "libfc: Failed to setup lport 0x%x\n",
+			lport->port_id);
+		mutex_unlock(&lport->disc.disc_mutex);
+		return;
+	}
 	kref_get(&lport->ptp_rdata->kref);
 	lport->ptp_rdata->ids.port_name = remote_wwpn;
 	lport->ptp_rdata->ids.node_name = remote_wwnn;
-- 
2.42.0