netdev.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Saeed Mahameed <saeed@kernel.org>
To: "David S. Miller" <davem@davemloft.net>,
	Jakub Kicinski <kuba@kernel.org>, Paolo Abeni <pabeni@redhat.com>,
	Eric Dumazet <edumazet@google.com>
Cc: Saeed Mahameed <saeedm@nvidia.com>,
	netdev@vger.kernel.org, Tariq Toukan <tariqt@nvidia.com>,
	Dust Li <dust.li@linux.alibaba.com>,
	Cruz Zhao <cruzzhao@linux.alibaba.com>,
	Tianchen Ding <dtcccc@linux.alibaba.com>,
	Wojciech Drewek <wojciech.drewek@intel.com>
Subject: [net 05/17] net/mlx5e: fix double free of encap_header
Date: Mon, 13 Nov 2023 13:08:14 -0800	[thread overview]
Message-ID: <20231113210826.47593-6-saeed@kernel.org> (raw)
In-Reply-To: <20231113210826.47593-1-saeed@kernel.org>

From: Dust Li <dust.li@linux.alibaba.com>

When mlx5_packet_reformat_alloc() fails, the encap_header allocated in
mlx5e_tc_tun_create_header_ipv4{6} will be released within it. However,
e->encap_header is already set to the previously freed encap_header
before mlx5_packet_reformat_alloc(). As a result, the later
mlx5e_encap_put() will free e->encap_header again, causing a double free
issue.

mlx5e_encap_put()
    --> mlx5e_encap_dealloc()
        --> kfree(e->encap_header)

This happens when cmd: MLX5_CMD_OP_ALLOC_PACKET_REFORMAT_CONTEXT fail.

This patch fix it by not setting e->encap_header until
mlx5_packet_reformat_alloc() success.

Fixes: d589e785baf5e("net/mlx5e: Allow concurrent creation of encap entries")
Reported-by: Cruz Zhao <cruzzhao@linux.alibaba.com>
Reported-by: Tianchen Ding <dtcccc@linux.alibaba.com>
Signed-off-by: Dust Li <dust.li@linux.alibaba.com>
Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
---
 drivers/net/ethernet/mellanox/mlx5/core/en/tc_tun.c | 10 ++++------
 1 file changed, 4 insertions(+), 6 deletions(-)

diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en/tc_tun.c b/drivers/net/ethernet/mellanox/mlx5/core/en/tc_tun.c
index 00a04fdd756f..8bca696b6658 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/en/tc_tun.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/en/tc_tun.c
@@ -300,9 +300,6 @@ int mlx5e_tc_tun_create_header_ipv4(struct mlx5e_priv *priv,
 	if (err)
 		goto destroy_neigh_entry;
 
-	e->encap_size = ipv4_encap_size;
-	e->encap_header = encap_header;
-
 	if (!(nud_state & NUD_VALID)) {
 		neigh_event_send(attr.n, NULL);
 		/* the encap entry will be made valid on neigh update event
@@ -322,6 +319,8 @@ int mlx5e_tc_tun_create_header_ipv4(struct mlx5e_priv *priv,
 		goto destroy_neigh_entry;
 	}
 
+	e->encap_size = ipv4_encap_size;
+	e->encap_header = encap_header;
 	e->flags |= MLX5_ENCAP_ENTRY_VALID;
 	mlx5e_rep_queue_neigh_stats_work(netdev_priv(attr.out_dev));
 	mlx5e_route_lookup_ipv4_put(&attr);
@@ -568,9 +567,6 @@ int mlx5e_tc_tun_create_header_ipv6(struct mlx5e_priv *priv,
 	if (err)
 		goto destroy_neigh_entry;
 
-	e->encap_size = ipv6_encap_size;
-	e->encap_header = encap_header;
-
 	if (!(nud_state & NUD_VALID)) {
 		neigh_event_send(attr.n, NULL);
 		/* the encap entry will be made valid on neigh update event
@@ -590,6 +586,8 @@ int mlx5e_tc_tun_create_header_ipv6(struct mlx5e_priv *priv,
 		goto destroy_neigh_entry;
 	}
 
+	e->encap_size = ipv6_encap_size;
+	e->encap_header = encap_header;
 	e->flags |= MLX5_ENCAP_ENTRY_VALID;
 	mlx5e_rep_queue_neigh_stats_work(netdev_priv(attr.out_dev));
 	mlx5e_route_lookup_ipv6_put(&attr);
-- 
2.41.0


  parent reply	other threads:[~2023-11-13 21:08 UTC|newest]

Thread overview: 19+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2023-11-13 21:08 [pull request][net 00/17] mlx5 fixes 2023-11-13 Saeed Mahameed
2023-11-13 21:08 ` [net 01/17] Revert "net/mlx5: DR, Supporting inline WQE when possible" Saeed Mahameed
2023-11-13 21:08 ` [net 02/17] net/mlx5: Free used cpus mask when an IRQ is released Saeed Mahameed
2023-11-13 21:08 ` [net 03/17] net/mlx5: DR, Allow old devices to use multi destination FTE Saeed Mahameed
2023-11-13 21:08 ` [net 04/17] net/mlx5: Decouple PHC .adjtime and .adjphase implementations Saeed Mahameed
2023-11-13 21:08 ` Saeed Mahameed [this message]
2023-11-13 21:08 ` [net 06/17] net/mlx5e: fix double free of encap_header in update funcs Saeed Mahameed
2023-11-13 21:08 ` [net 07/17] net/mlx5e: Fix pedit endianness Saeed Mahameed
2023-11-13 21:08 ` [net 08/17] net/mlx5e: TC, Don't offload post action rule if not supported Saeed Mahameed
2023-11-13 21:08 ` [net 09/17] net/mlx5e: Don't modify the peer sent-to-vport rules for IPSec offload Saeed Mahameed
2023-11-13 21:08 ` [net 10/17] net/mlx5e: Avoid referencing skb after free-ing in drop path of mlx5e_sq_xmit_wqe Saeed Mahameed
2023-11-13 21:08 ` [net 11/17] net/mlx5e: Track xmit submission to PTP WQ after populating metadata map Saeed Mahameed
2023-11-13 21:08 ` [net 12/17] net/mlx5e: Update doorbell for port timestamping CQ before the software counter Saeed Mahameed
2023-11-13 21:08 ` [net 13/17] net/mlx5: Fix a NULL vs IS_ERR() check Saeed Mahameed
2023-11-13 21:08 ` [net 14/17] net/mlx5: Increase size of irq name buffer Saeed Mahameed
2023-11-13 21:08 ` [net 15/17] net/mlx5e: Reduce the size of icosq_str Saeed Mahameed
2023-11-13 21:08 ` [net 16/17] net/mlx5e: Check return value of snprintf writing to fw_version buffer Saeed Mahameed
2023-11-13 21:08 ` [net 17/17] net/mlx5e: Check return value of snprintf writing to fw_version buffer for representors Saeed Mahameed
2023-11-14  5:02 ` [pull request][net 00/17] mlx5 fixes 2023-11-13 Jakub Kicinski

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20231113210826.47593-6-saeed@kernel.org \
    --to=saeed@kernel.org \
    --cc=cruzzhao@linux.alibaba.com \
    --cc=davem@davemloft.net \
    --cc=dtcccc@linux.alibaba.com \
    --cc=dust.li@linux.alibaba.com \
    --cc=edumazet@google.com \
    --cc=kuba@kernel.org \
    --cc=netdev@vger.kernel.org \
    --cc=pabeni@redhat.com \
    --cc=saeedm@nvidia.com \
    --cc=tariqt@nvidia.com \
    --cc=wojciech.drewek@intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).