[PATCH v2 net-next 3/4] net: ethernet: am65-cpsw: Set default TX channels to maximum

[Roger Quadros <rogerq@kernel.org>]

am65-cpsw supports 8 TX hardware queues. Set this as default.

The rationale is that some am65-cpsw devices can have up to 4 ethernet
ports. If the number of TX channels have to be changed then all
interfaces have to be brought down and up as the old default of 1
TX channel is too restrictive for any mqprio/taprio usage.

Another reason for this change is to allow testing using
kselftest:net/forwarding:ethtool_mm.sh out of the box.

Signed-off-by: Roger Quadros <rogerq@kernel.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
---
 drivers/net/ethernet/ti/am65-cpsw-nuss.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/ti/am65-cpsw-nuss.c b/drivers/net/ethernet/ti/am65-cpsw-nuss.c
index adb29e8e8026..78b3e69fbccb 100644
--- a/drivers/net/ethernet/ti/am65-cpsw-nuss.c
+++ b/drivers/net/ethernet/ti/am65-cpsw-nuss.c
@@ -136,6 +136,8 @@
 			 NETIF_MSG_IFUP	| NETIF_MSG_PROBE | NETIF_MSG_IFDOWN | \
 			 NETIF_MSG_RX_ERR | NETIF_MSG_TX_ERR)
 
+#define AM65_CPSW_DEFAULT_TX_CHNS	8
+
 static void am65_cpsw_port_set_sl_mac(struct am65_cpsw_port *slave,
 				      const u8 *dev_addr)
 {
@@ -2894,7 +2896,7 @@ static int am65_cpsw_nuss_probe(struct platform_device *pdev)
 
 	common->rx_flow_id_base = -1;
 	init_completion(&common->tdown_complete);
-	common->tx_ch_num = 1;
+	common->tx_ch_num = AM65_CPSW_DEFAULT_TX_CHNS;
 	common->pf_p0_rx_ptype_rrobin = false;
 	common->default_vlan = 1;
 
-- 
2.34.1