[PATCH net-next v2] firmware_loader: Expand Firmware upload error codes with firmware invalid error

[Kory Maincent <kory.maincent@bootlin.com>]

No error code are available to signal an invalid firmware content.
Drivers that can check the firmware content validity can not return this
specific failure to the user-space

Expand the firmware error code with an additional code:
- "firmware invalid" code which can be used when the provided firmware
  is invalid

Acked-by: Luis Chamberlain <mcgrof@kernel.org>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Kory Maincent <kory.maincent@bootlin.com>
---

This patch was initially submitted as part of a net patch series.
Conor expressed interest in using it in a different subsystem.
https://lore.kernel.org/netdev/20231116-feature_poe-v1-7-be48044bf249@bootlin.com/

Consequently, I extracted it from the series and submitted it separately.
I first tried to send it to driver-core but it seems also not the best
choice:
https://lore.kernel.org/lkml/2023111720-slicer-exes-7d9f@gregkh/

Jakub could you create a stable branch for this patch and share the branch
information? This way other Maintainers can then pull the patch.
---
 drivers/base/firmware_loader/sysfs_upload.c | 1 +
 include/linux/firmware.h                    | 2 ++
 2 files changed, 3 insertions(+)

diff --git a/drivers/base/firmware_loader/sysfs_upload.c b/drivers/base/firmware_loader/sysfs_upload.c
index a0af8f5f13d8..829270067d16 100644
--- a/drivers/base/firmware_loader/sysfs_upload.c
+++ b/drivers/base/firmware_loader/sysfs_upload.c
@@ -27,6 +27,7 @@ static const char * const fw_upload_err_str[] = {
 	[FW_UPLOAD_ERR_INVALID_SIZE] = "invalid-file-size",
 	[FW_UPLOAD_ERR_RW_ERROR]     = "read-write-error",
 	[FW_UPLOAD_ERR_WEAROUT]	     = "flash-wearout",
+	[FW_UPLOAD_ERR_FW_INVALID]   = "firmware-invalid",
 };
 
 static const char *fw_upload_progress(struct device *dev,
diff --git a/include/linux/firmware.h b/include/linux/firmware.h
index de7fea3bca51..0311858b46ce 100644
--- a/include/linux/firmware.h
+++ b/include/linux/firmware.h
@@ -27,6 +27,7 @@ struct firmware {
  * @FW_UPLOAD_ERR_INVALID_SIZE: invalid firmware image size
  * @FW_UPLOAD_ERR_RW_ERROR: read or write to HW failed, see kernel log
  * @FW_UPLOAD_ERR_WEAROUT: FLASH device is approaching wear-out, wait & retry
+ * @FW_UPLOAD_ERR_FW_INVALID: invalid firmware file
  * @FW_UPLOAD_ERR_MAX: Maximum error code marker
  */
 enum fw_upload_err {
@@ -38,6 +39,7 @@ enum fw_upload_err {
 	FW_UPLOAD_ERR_INVALID_SIZE,
 	FW_UPLOAD_ERR_RW_ERROR,
 	FW_UPLOAD_ERR_WEAROUT,
+	FW_UPLOAD_ERR_FW_INVALID,
 	FW_UPLOAD_ERR_MAX
 };
 

---
base-commit: b85ea95d086471afb4ad062012a4d73cd328fa86
change-id: 20231117-feature_firmware_error_code-b8d7af08a8fe

Best regards,
-- 
Köry Maincent, Bootlin
Embedded Linux and kernel engineering
https://bootlin.com