[PATCH RFC net-next 7/8] arm: boot: dts: mvebu: linksys-mamba: Add Ethernet LEDs

[Andrew Lunn <andrew@lunn.ch>]

List the front panel Ethernet LEDs in the switch section of the
device tree. They can then be controlled via /sys/class/led/

The node contains a label property to influence the name of the LED.
Without it, all the LEDs get the name lan:white, which classes, and so
some get a number appended. lan:white_1, lan:white_2, etc. Using the
label the LEDs are named lan1:front, lan2:front, lan3:front, where
lanX indicates the interface name, and front indicates they are on the
front of the box.

Signed-off-by: Andrew Lunn <andrew@lunn.ch>
---
 .../dts/marvell/armada-xp-linksys-mamba.dts   | 66 +++++++++++++++++++
 1 file changed, 66 insertions(+)

diff --git a/arch/arm/boot/dts/marvell/armada-xp-linksys-mamba.dts b/arch/arm/boot/dts/marvell/armada-xp-linksys-mamba.dts
index 7a0614fd0c93..f3949e992d56 100644
--- a/arch/arm/boot/dts/marvell/armada-xp-linksys-mamba.dts
+++ b/arch/arm/boot/dts/marvell/armada-xp-linksys-mamba.dts
@@ -19,6 +19,7 @@
 /dts-v1/;
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
 #include "armada-xp-mv78230.dtsi"
 
 / {
@@ -278,26 +279,91 @@ ports {
 			port@0 {
 				reg = <0>;
 				label = "lan4";
+
+				leds {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					led@0 {
+						reg = <0>;
+						color = <LED_COLOR_ID_WHITE>;
+						function = LED_FUNCTION_LAN;
+						label = "front";
+						default-state = "keep";
+					};
+				};
 			};
 
 			port@1 {
 				reg = <1>;
 				label = "lan3";
+
+				leds {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					led@0 {
+						reg = <0>;
+						color = <LED_COLOR_ID_WHITE>;
+						function = LED_FUNCTION_LAN;
+						label = "front";
+						default-state = "keep";
+					};
+				};
 			};
 
 			port@2 {
 				reg = <2>;
 				label = "lan2";
+
+				leds {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					led@0 {
+						reg = <0>;
+						color = <LED_COLOR_ID_WHITE>;
+						function = LED_FUNCTION_LAN;
+						label = "front";
+						default-state = "keep";
+					};
+				};
 			};
 
 			port@3 {
 				reg = <3>;
 				label = "lan1";
+
+				leds {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					led@0 {
+						reg = <0>;
+						color = <LED_COLOR_ID_WHITE>;
+						function = LED_FUNCTION_LAN;
+						label = "front";
+						default-state = "keep";
+					};
+				};
 			};
 
 			port@4 {
 				reg = <4>;
 				label = "internet";
+
+				leds {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					led@0 {
+						reg = <0>;
+						color = <LED_COLOR_ID_WHITE>;
+						function = LED_FUNCTION_LAN;
+						label = "front";
+						default-state = "keep";
+					};
+				};
 			};
 
 			port@5 {
-- 
2.42.0