Re: [PATCH v8 net-next 08/11] net: ethernet: ti: am65-cpsw: add mqprio qdisc offload in channel mode

[Vladimir Oltean <vladimir.oltean@nxp.com>]

On Wed, Dec 13, 2023 at 01:07:18PM +0200, Roger Quadros wrote:
> +	for (i = num_tc - 1; i >= 0; i--) {
> +		u32 ch_msk;
> +
> +		if (mqprio->min_rate[i])
> +			min_rate_msk |= BIT(i);
> +		min_rate_total +=  mqprio->min_rate[i];
> +
> +		if (has_max_rate) {
> +			if (mqprio->max_rate[i])
> +				max_rate_msk |= BIT(i);
> +			max_rate_total +=  mqprio->max_rate[i];
> +
> +			if (!mqprio->min_rate[i] && mqprio->max_rate[i]) {
> +				NL_SET_ERR_MSG_FMT_MOD(extack,
> +						       "TX tc%d rate max>0 but min=0\n",
> +						       i);
> +				return -EINVAL;
> +			}
> +
> +			if (mqprio->max_rate[i] &&
> +			    mqprio->max_rate[i] < mqprio->min_rate[i]) {
> +				NL_SET_ERR_MSG_FMT_MOD(extack,
> +						       "TX tc%d rate min(%llu)>max(%llu)\n",
> +						       i, mqprio->min_rate[i],
> +						       mqprio->max_rate[i]);
> +				return -EINVAL;
> +			}
> +		}
> +
> +		ch_msk = GENMASK(num_tc - 1, i);
> +		if ((min_rate_msk & BIT(i)) && (min_rate_msk ^ ch_msk)) {
> +			NL_SET_ERR_MSG_FMT_MOD(extack,
> +					       "Min rate must be set sequentially hi->lo tx_rate_msk%x\n",
> +					       min_rate_msk);
> +			return -EINVAL;
> +		}
> +
> +		if ((max_rate_msk & BIT(i)) && (max_rate_msk ^ ch_msk)) {
> +			NL_SET_ERR_MSG_FMT_MOD(extack,
> +					       "Max rate must be set sequentially hi->lo tx_rate_msk%x\n",
> +					       max_rate_msk);
> +			return -EINVAL;
> +		}
> +	}

Netlink extack strings don't need \n at the end.