* [PATCH v2 1/1] virtio_net: Fix "‘%d’ directive writing between 1 and 11 bytes into a region of size 10" warnings
@ 2023-12-27 14:26 Zhu Yanjun
2023-12-27 14:41 ` Zhu Yanjun
2024-01-04 0:55 ` Jakub Kicinski
0 siblings, 2 replies; 5+ messages in thread
From: Zhu Yanjun @ 2023-12-27 14:26 UTC (permalink / raw)
To: mst, jasowang, xuanzhuo, davem, edumazet, kuba, pabeni,
virtualization, netdev
Cc: Zhu Yanjun
From: Zhu Yanjun <yanjun.zhu@linux.dev>
Fix the warnings when building virtio_net driver.
"
drivers/net/virtio_net.c: In function ‘init_vqs’:
drivers/net/virtio_net.c:4551:48: warning: ‘%d’ directive writing between 1 and 11 bytes into a region of size 10 [-Wformat-overflow=]
4551 | sprintf(vi->rq[i].name, "input.%d", i);
| ^~
In function ‘virtnet_find_vqs’,
inlined from ‘init_vqs’ at drivers/net/virtio_net.c:4645:8:
drivers/net/virtio_net.c:4551:41: note: directive argument in the range [-2147483643, 65534]
4551 | sprintf(vi->rq[i].name, "input.%d", i);
| ^~~~~~~~~~
drivers/net/virtio_net.c:4551:17: note: ‘sprintf’ output between 8 and 18 bytes into a destination of size 16
4551 | sprintf(vi->rq[i].name, "input.%d", i);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/net/virtio_net.c: In function ‘init_vqs’:
drivers/net/virtio_net.c:4552:49: warning: ‘%d’ directive writing between 1 and 11 bytes into a region of size 9 [-Wformat-overflow=]
4552 | sprintf(vi->sq[i].name, "output.%d", i);
| ^~
In function ‘virtnet_find_vqs’,
inlined from ‘init_vqs’ at drivers/net/virtio_net.c:4645:8:
drivers/net/virtio_net.c:4552:41: note: directive argument in the range [-2147483643, 65534]
4552 | sprintf(vi->sq[i].name, "output.%d", i);
| ^~~~~~~~~~~
drivers/net/virtio_net.c:4552:17: note: ‘sprintf’ output between 9 and 19 bytes into a destination of size 16
4552 | sprintf(vi->sq[i].name, "output.%d", i);
"
Reviewed-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Signed-off-by: Zhu Yanjun <yanjun.zhu@linux.dev>
---
drivers/net/virtio_net.c | 9 +++++----
1 file changed, 5 insertions(+), 4 deletions(-)
diff --git a/drivers/net/virtio_net.c b/drivers/net/virtio_net.c
index d16f592c2061..89a15cc81396 100644
--- a/drivers/net/virtio_net.c
+++ b/drivers/net/virtio_net.c
@@ -4096,10 +4096,11 @@ static int virtnet_find_vqs(struct virtnet_info *vi)
{
vq_callback_t **callbacks;
struct virtqueue **vqs;
- int ret = -ENOMEM;
- int i, total_vqs;
const char **names;
+ int ret = -ENOMEM;
+ int total_vqs;
bool *ctx;
+ u16 i;
/* We expect 1 RX virtqueue followed by 1 TX virtqueue, followed by
* possible N-1 RX/TX queue pairs used in multiqueue mode, followed by
@@ -4136,8 +4137,8 @@ static int virtnet_find_vqs(struct virtnet_info *vi)
for (i = 0; i < vi->max_queue_pairs; i++) {
callbacks[rxq2vq(i)] = skb_recv_done;
callbacks[txq2vq(i)] = skb_xmit_done;
- sprintf(vi->rq[i].name, "input.%d", i);
- sprintf(vi->sq[i].name, "output.%d", i);
+ sprintf(vi->rq[i].name, "input.%u", i);
+ sprintf(vi->sq[i].name, "output.%u", i);
names[rxq2vq(i)] = vi->rq[i].name;
names[txq2vq(i)] = vi->sq[i].name;
if (ctx)
--
2.27.0
^ permalink raw reply related [flat|nested] 5+ messages in thread
* Re: [PATCH v2 1/1] virtio_net: Fix "‘%d’ directive writing between 1 and 11 bytes into a region of size 10" warnings
2023-12-27 14:26 [PATCH v2 1/1] virtio_net: Fix "‘%d’ directive writing between 1 and 11 bytes into a region of size 10" warnings Zhu Yanjun
@ 2023-12-27 14:41 ` Zhu Yanjun
2023-12-28 1:26 ` Xuan Zhuo
2024-01-04 0:55 ` Jakub Kicinski
1 sibling, 1 reply; 5+ messages in thread
From: Zhu Yanjun @ 2023-12-27 14:41 UTC (permalink / raw)
To: Zhu Yanjun, mst, jasowang, xuanzhuo, davem, edumazet, kuba,
pabeni, virtualization, netdev
在 2023/12/27 22:26, Zhu Yanjun 写道:
> From: Zhu Yanjun <yanjun.zhu@linux.dev>
>
> Fix the warnings when building virtio_net driver.
>
> "
> drivers/net/virtio_net.c: In function ‘init_vqs’:
> drivers/net/virtio_net.c:4551:48: warning: ‘%d’ directive writing between 1 and 11 bytes into a region of size 10 [-Wformat-overflow=]
> 4551 | sprintf(vi->rq[i].name, "input.%d", i);
> | ^~
> In function ‘virtnet_find_vqs’,
> inlined from ‘init_vqs’ at drivers/net/virtio_net.c:4645:8:
> drivers/net/virtio_net.c:4551:41: note: directive argument in the range [-2147483643, 65534]
> 4551 | sprintf(vi->rq[i].name, "input.%d", i);
> | ^~~~~~~~~~
> drivers/net/virtio_net.c:4551:17: note: ‘sprintf’ output between 8 and 18 bytes into a destination of size 16
> 4551 | sprintf(vi->rq[i].name, "input.%d", i);
> | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> drivers/net/virtio_net.c: In function ‘init_vqs’:
> drivers/net/virtio_net.c:4552:49: warning: ‘%d’ directive writing between 1 and 11 bytes into a region of size 9 [-Wformat-overflow=]
> 4552 | sprintf(vi->sq[i].name, "output.%d", i);
> | ^~
> In function ‘virtnet_find_vqs’,
> inlined from ‘init_vqs’ at drivers/net/virtio_net.c:4645:8:
> drivers/net/virtio_net.c:4552:41: note: directive argument in the range [-2147483643, 65534]
> 4552 | sprintf(vi->sq[i].name, "output.%d", i);
> | ^~~~~~~~~~~
> drivers/net/virtio_net.c:4552:17: note: ‘sprintf’ output between 9 and 19 bytes into a destination of size 16
> 4552 | sprintf(vi->sq[i].name, "output.%d", i);
>
> "
Hi, all
V1->V2: Add commit logs. Format string is changed.
Best Regards,
Zhu Yanjun
> Reviewed-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
> Signed-off-by: Zhu Yanjun <yanjun.zhu@linux.dev>
> ---
> drivers/net/virtio_net.c | 9 +++++----
> 1 file changed, 5 insertions(+), 4 deletions(-)
>
> diff --git a/drivers/net/virtio_net.c b/drivers/net/virtio_net.c
> index d16f592c2061..89a15cc81396 100644
> --- a/drivers/net/virtio_net.c
> +++ b/drivers/net/virtio_net.c
> @@ -4096,10 +4096,11 @@ static int virtnet_find_vqs(struct virtnet_info *vi)
> {
> vq_callback_t **callbacks;
> struct virtqueue **vqs;
> - int ret = -ENOMEM;
> - int i, total_vqs;
> const char **names;
> + int ret = -ENOMEM;
> + int total_vqs;
> bool *ctx;
> + u16 i;
>
> /* We expect 1 RX virtqueue followed by 1 TX virtqueue, followed by
> * possible N-1 RX/TX queue pairs used in multiqueue mode, followed by
> @@ -4136,8 +4137,8 @@ static int virtnet_find_vqs(struct virtnet_info *vi)
> for (i = 0; i < vi->max_queue_pairs; i++) {
> callbacks[rxq2vq(i)] = skb_recv_done;
> callbacks[txq2vq(i)] = skb_xmit_done;
> - sprintf(vi->rq[i].name, "input.%d", i);
> - sprintf(vi->sq[i].name, "output.%d", i);
> + sprintf(vi->rq[i].name, "input.%u", i);
> + sprintf(vi->sq[i].name, "output.%u", i);
> names[rxq2vq(i)] = vi->rq[i].name;
> names[txq2vq(i)] = vi->sq[i].name;
> if (ctx)
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [PATCH v2 1/1] virtio_net: Fix "‘%d’ directive writing between 1 and 11 bytes into a region of size 10" warnings
2023-12-27 14:41 ` Zhu Yanjun
@ 2023-12-28 1:26 ` Xuan Zhuo
0 siblings, 0 replies; 5+ messages in thread
From: Xuan Zhuo @ 2023-12-28 1:26 UTC (permalink / raw)
To: Zhu Yanjun
Cc: Zhu Yanjun, mst, jasowang, davem, edumazet, kuba, pabeni,
virtualization, netdev
On Wed, 27 Dec 2023 22:41:07 +0800, Zhu Yanjun <yanjun.zhu@linux.dev> wrote:
>
> 在 2023/12/27 22:26, Zhu Yanjun 写道:
> > From: Zhu Yanjun <yanjun.zhu@linux.dev>
> >
> > Fix the warnings when building virtio_net driver.
> >
> > "
> > drivers/net/virtio_net.c: In function ‘init_vqs’:
> > drivers/net/virtio_net.c:4551:48: warning: ‘%d’ directive writing between 1 and 11 bytes into a region of size 10 [-Wformat-overflow=]
> > 4551 | sprintf(vi->rq[i].name, "input.%d", i);
> > | ^~
> > In function ‘virtnet_find_vqs’,
> > inlined from ‘init_vqs’ at drivers/net/virtio_net.c:4645:8:
> > drivers/net/virtio_net.c:4551:41: note: directive argument in the range [-2147483643, 65534]
> > 4551 | sprintf(vi->rq[i].name, "input.%d", i);
> > | ^~~~~~~~~~
> > drivers/net/virtio_net.c:4551:17: note: ‘sprintf’ output between 8 and 18 bytes into a destination of size 16
> > 4551 | sprintf(vi->rq[i].name, "input.%d", i);
> > | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> > drivers/net/virtio_net.c: In function ‘init_vqs’:
> > drivers/net/virtio_net.c:4552:49: warning: ‘%d’ directive writing between 1 and 11 bytes into a region of size 9 [-Wformat-overflow=]
> > 4552 | sprintf(vi->sq[i].name, "output.%d", i);
> > | ^~
> > In function ‘virtnet_find_vqs’,
> > inlined from ‘init_vqs’ at drivers/net/virtio_net.c:4645:8:
> > drivers/net/virtio_net.c:4552:41: note: directive argument in the range [-2147483643, 65534]
> > 4552 | sprintf(vi->sq[i].name, "output.%d", i);
> > | ^~~~~~~~~~~
> > drivers/net/virtio_net.c:4552:17: note: ‘sprintf’ output between 9 and 19 bytes into a destination of size 16
> > 4552 | sprintf(vi->sq[i].name, "output.%d", i);
> >
> > "
>
> Hi, all
>
> V1->V2: Add commit logs. Format string is changed.
>
> Best Regards,
>
> Zhu Yanjun
>
> > Reviewed-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
> > Signed-off-by: Zhu Yanjun <yanjun.zhu@linux.dev>
> > ---
You can put the changes log after "---" inside the patch.
Thanks.
> > drivers/net/virtio_net.c | 9 +++++----
> > 1 file changed, 5 insertions(+), 4 deletions(-)
> >
> > diff --git a/drivers/net/virtio_net.c b/drivers/net/virtio_net.c
> > index d16f592c2061..89a15cc81396 100644
> > --- a/drivers/net/virtio_net.c
> > +++ b/drivers/net/virtio_net.c
> > @@ -4096,10 +4096,11 @@ static int virtnet_find_vqs(struct virtnet_info *vi)
> > {
> > vq_callback_t **callbacks;
> > struct virtqueue **vqs;
> > - int ret = -ENOMEM;
> > - int i, total_vqs;
> > const char **names;
> > + int ret = -ENOMEM;
> > + int total_vqs;
> > bool *ctx;
> > + u16 i;
> >
> > /* We expect 1 RX virtqueue followed by 1 TX virtqueue, followed by
> > * possible N-1 RX/TX queue pairs used in multiqueue mode, followed by
> > @@ -4136,8 +4137,8 @@ static int virtnet_find_vqs(struct virtnet_info *vi)
> > for (i = 0; i < vi->max_queue_pairs; i++) {
> > callbacks[rxq2vq(i)] = skb_recv_done;
> > callbacks[txq2vq(i)] = skb_xmit_done;
> > - sprintf(vi->rq[i].name, "input.%d", i);
> > - sprintf(vi->sq[i].name, "output.%d", i);
> > + sprintf(vi->rq[i].name, "input.%u", i);
> > + sprintf(vi->sq[i].name, "output.%u", i);
> > names[rxq2vq(i)] = vi->rq[i].name;
> > names[txq2vq(i)] = vi->sq[i].name;
> > if (ctx)
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [PATCH v2 1/1] virtio_net: Fix "‘%d’ directive writing between 1 and 11 bytes into a region of size 10" warnings
2023-12-27 14:26 [PATCH v2 1/1] virtio_net: Fix "‘%d’ directive writing between 1 and 11 bytes into a region of size 10" warnings Zhu Yanjun
2023-12-27 14:41 ` Zhu Yanjun
@ 2024-01-04 0:55 ` Jakub Kicinski
2024-01-04 1:30 ` Zhu Yanjun
1 sibling, 1 reply; 5+ messages in thread
From: Jakub Kicinski @ 2024-01-04 0:55 UTC (permalink / raw)
To: Zhu Yanjun
Cc: mst, jasowang, xuanzhuo, davem, edumazet, pabeni, virtualization,
netdev, Zhu Yanjun
On Wed, 27 Dec 2023 22:26:37 +0800 Zhu Yanjun wrote:
> From: Zhu Yanjun <yanjun.zhu@linux.dev>
>
> Fix the warnings when building virtio_net driver.
This got marked as Not Applicable in patchwork, not sure why.
Could you repost?
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [PATCH v2 1/1] virtio_net: Fix "‘%d’ directive writing between 1 and 11 bytes into a region of size 10" warnings
2024-01-04 0:55 ` Jakub Kicinski
@ 2024-01-04 1:30 ` Zhu Yanjun
0 siblings, 0 replies; 5+ messages in thread
From: Zhu Yanjun @ 2024-01-04 1:30 UTC (permalink / raw)
To: Jakub Kicinski, Zhu Yanjun
Cc: mst, jasowang, xuanzhuo, davem, edumazet, pabeni, virtualization,
netdev
在 2024/1/4 8:55, Jakub Kicinski 写道:
> On Wed, 27 Dec 2023 22:26:37 +0800 Zhu Yanjun wrote:
>> From: Zhu Yanjun <yanjun.zhu@linux.dev>
>>
>> Fix the warnings when building virtio_net driver.
> This got marked as Not Applicable in patchwork, not sure why.
> Could you repost?
Got it. I will resend this commit very soon.
Best Regards,
Zhu Yanjun
^ permalink raw reply [flat|nested] 5+ messages in thread
end of thread, other threads:[~2024-01-04 1:31 UTC | newest]
Thread overview: 5+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2023-12-27 14:26 [PATCH v2 1/1] virtio_net: Fix "‘%d’ directive writing between 1 and 11 bytes into a region of size 10" warnings Zhu Yanjun
2023-12-27 14:41 ` Zhu Yanjun
2023-12-28 1:26 ` Xuan Zhuo
2024-01-04 0:55 ` Jakub Kicinski
2024-01-04 1:30 ` Zhu Yanjun
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).