netdev.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Luiz Angelo Daros de Luca <luizluca@gmail.com>
To: "Linus Walleij" <linus.walleij@linaro.org>,
	"Alvin Šipraga" <alsi@bang-olufsen.dk>,
	"Andrew Lunn" <andrew@lunn.ch>,
	"Florian Fainelli" <f.fainelli@gmail.com>,
	"Vladimir Oltean" <olteanv@gmail.com>,
	"David S. Miller" <davem@davemloft.net>,
	"Eric Dumazet" <edumazet@google.com>,
	"Jakub Kicinski" <kuba@kernel.org>,
	"Paolo Abeni" <pabeni@redhat.com>,
	"Russell King" <linux@armlinux.org.uk>
Cc: netdev@vger.kernel.org, linux-kernel@vger.kernel.org,
	 Luiz Angelo Daros de Luca <luizluca@gmail.com>
Subject: [PATCH net-next v5 11/11] net: dsa: realtek: embed dsa_switch into realtek_priv
Date: Tue, 30 Jan 2024 20:13:30 -0300	[thread overview]
Message-ID: <20240130-realtek_reverse-v5-11-ecafd9283a07@gmail.com> (raw)
In-Reply-To: <20240130-realtek_reverse-v5-0-ecafd9283a07@gmail.com>

To eliminate the need for a second memory allocation for dsa_switch, it
has been embedded within realtek_priv.

Suggested-by: Alvin Šipraga <alsi@bang-olufsen.dk>
Signed-off-by: Luiz Angelo Daros de Luca <luizluca@gmail.com>
---
 drivers/net/dsa/realtek/realtek.h   |  2 +-
 drivers/net/dsa/realtek/rtl8365mb.c | 12 ++++++------
 drivers/net/dsa/realtek/rtl8366rb.c |  2 +-
 drivers/net/dsa/realtek/rtl83xx.c   | 18 +++++++-----------
 4 files changed, 15 insertions(+), 19 deletions(-)

diff --git a/drivers/net/dsa/realtek/realtek.h b/drivers/net/dsa/realtek/realtek.h
index 864bb9a88f14..b80bfde1ad04 100644
--- a/drivers/net/dsa/realtek/realtek.h
+++ b/drivers/net/dsa/realtek/realtek.h
@@ -61,7 +61,7 @@ struct realtek_priv {
 	const struct realtek_variant *variant;
 
 	spinlock_t		lock; /* Locks around command writes */
-	struct dsa_switch	*ds;
+	struct dsa_switch	ds;
 	struct irq_domain	*irqdomain;
 	bool			leds_disabled;
 
diff --git a/drivers/net/dsa/realtek/rtl8365mb.c b/drivers/net/dsa/realtek/rtl8365mb.c
index 778a962727ab..9066e34e9ace 100644
--- a/drivers/net/dsa/realtek/rtl8365mb.c
+++ b/drivers/net/dsa/realtek/rtl8365mb.c
@@ -880,7 +880,7 @@ static int rtl8365mb_ext_config_rgmii(struct realtek_priv *priv, int port,
 	if (!extint)
 		return -ENODEV;
 
-	dp = dsa_to_port(priv->ds, port);
+	dp = dsa_to_port(&priv->ds, port);
 	dn = dp->dn;
 
 	/* Set the RGMII TX/RX delay
@@ -1543,7 +1543,7 @@ static void rtl8365mb_stats_setup(struct realtek_priv *priv)
 	for (i = 0; i < priv->num_ports; i++) {
 		struct rtl8365mb_port *p = &mb->ports[i];
 
-		if (dsa_is_unused_port(priv->ds, i))
+		if (dsa_is_unused_port(&priv->ds, i))
 			continue;
 
 		/* Per-port spinlock to protect the stats64 data */
@@ -1564,7 +1564,7 @@ static void rtl8365mb_stats_teardown(struct realtek_priv *priv)
 	for (i = 0; i < priv->num_ports; i++) {
 		struct rtl8365mb_port *p = &mb->ports[i];
 
-		if (dsa_is_unused_port(priv->ds, i))
+		if (dsa_is_unused_port(&priv->ds, i))
 			continue;
 
 		cancel_delayed_work_sync(&p->mib_work);
@@ -1963,7 +1963,7 @@ static int rtl8365mb_setup(struct dsa_switch *ds)
 		dev_info(priv->dev, "no interrupt support\n");
 
 	/* Configure CPU tagging */
-	dsa_switch_for_each_cpu_port(cpu_dp, priv->ds) {
+	dsa_switch_for_each_cpu_port(cpu_dp, &priv->ds) {
 		cpu->mask |= BIT(cpu_dp->index);
 
 		if (cpu->trap_port == RTL8365MB_MAX_NUM_PORTS)
@@ -1978,7 +1978,7 @@ static int rtl8365mb_setup(struct dsa_switch *ds)
 	for (i = 0; i < priv->num_ports; i++) {
 		struct rtl8365mb_port *p = &mb->ports[i];
 
-		if (dsa_is_unused_port(priv->ds, i))
+		if (dsa_is_unused_port(&priv->ds, i))
 			continue;
 
 		/* Forward only to the CPU */
@@ -1995,7 +1995,7 @@ static int rtl8365mb_setup(struct dsa_switch *ds)
 		 * ports will still forward frames to the CPU despite being
 		 * administratively down by default.
 		 */
-		rtl8365mb_port_stp_state_set(priv->ds, i, BR_STATE_DISABLED);
+		rtl8365mb_port_stp_state_set(&priv->ds, i, BR_STATE_DISABLED);
 
 		/* Set up per-port private data */
 		p->priv = priv;
diff --git a/drivers/net/dsa/realtek/rtl8366rb.c b/drivers/net/dsa/realtek/rtl8366rb.c
index 54eff9cd0c03..cdc37be1ed2c 100644
--- a/drivers/net/dsa/realtek/rtl8366rb.c
+++ b/drivers/net/dsa/realtek/rtl8366rb.c
@@ -1675,7 +1675,7 @@ static int rtl8366rb_set_mc_index(struct realtek_priv *priv, int port, int index
 	 * not drop any untagged or C-tagged frames. Make sure to update the
 	 * filtering setting.
 	 */
-	if (dsa_port_is_vlan_filtering(dsa_to_port(priv->ds, port)))
+	if (dsa_port_is_vlan_filtering(dsa_to_port(&priv->ds, port)))
 		ret = rtl8366rb_drop_untagged(priv, port, !pvid_enabled);
 
 	return ret;
diff --git a/drivers/net/dsa/realtek/rtl83xx.c b/drivers/net/dsa/realtek/rtl83xx.c
index aa998e15c42b..f65e47339d5b 100644
--- a/drivers/net/dsa/realtek/rtl83xx.c
+++ b/drivers/net/dsa/realtek/rtl83xx.c
@@ -226,16 +226,12 @@ int rtl83xx_register_switch(struct realtek_priv *priv)
 		return ret;
 	}
 
-	priv->ds = devm_kzalloc(priv->dev, sizeof(*priv->ds), GFP_KERNEL);
-	if (!priv->ds)
-		return -ENOMEM;
+	priv->ds.priv = priv;
+	priv->ds.dev = priv->dev;
+	priv->ds.ops = priv->variant->ds_ops;
+	priv->ds.num_ports = priv->num_ports;
 
-	priv->ds->priv = priv;
-	priv->ds->dev = priv->dev;
-	priv->ds->ops = priv->variant->ds_ops;
-	priv->ds->num_ports = priv->num_ports;
-
-	ret = dsa_register_switch(priv->ds);
+	ret = dsa_register_switch(&priv->ds);
 	if (ret) {
 		dev_err_probe(priv->dev, ret, "unable to register switch\n");
 		return ret;
@@ -256,7 +252,7 @@ EXPORT_SYMBOL_NS_GPL(rtl83xx_register_switch, REALTEK_DSA);
  */
 void rtl83xx_unregister_switch(struct realtek_priv *priv)
 {
-	dsa_unregister_switch(priv->ds);
+	dsa_unregister_switch(&priv->ds);
 }
 EXPORT_SYMBOL_NS_GPL(rtl83xx_unregister_switch, REALTEK_DSA);
 
@@ -273,7 +269,7 @@ EXPORT_SYMBOL_NS_GPL(rtl83xx_unregister_switch, REALTEK_DSA);
  */
 void rtl83xx_shutdown(struct realtek_priv *priv)
 {
-	dsa_switch_shutdown(priv->ds);
+	dsa_switch_shutdown(&priv->ds);
 
 	dev_set_drvdata(priv->dev, NULL);
 }

-- 
2.43.0


  parent reply	other threads:[~2024-01-30 23:14 UTC|newest]

Thread overview: 21+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2024-01-30 23:13 [PATCH net-next v5 00/11] net: dsa: realtek: variants to drivers, interfaces to a common module Luiz Angelo Daros de Luca
2024-01-30 23:13 ` [PATCH net-next v5 01/11] net: dsa: realtek: drop cleanup from realtek_ops Luiz Angelo Daros de Luca
2024-02-01  0:40   ` Vladimir Oltean
2024-01-30 23:13 ` [PATCH net-next v5 02/11] net: dsa: realtek: introduce REALTEK_DSA namespace Luiz Angelo Daros de Luca
2024-01-30 23:13 ` [PATCH net-next v5 03/11] net: dsa: realtek: convert variants into real drivers Luiz Angelo Daros de Luca
2024-02-01 11:30   ` Vladimir Oltean
2024-01-30 23:13 ` [PATCH net-next v5 04/11] net: dsa: realtek: keep variant reference in realtek_priv Luiz Angelo Daros de Luca
2024-01-30 23:13 ` [PATCH net-next v5 05/11] net: dsa: realtek: common rtl83xx module Luiz Angelo Daros de Luca
2024-02-01 18:23   ` Vladimir Oltean
2024-01-30 23:13 ` [PATCH net-next v5 06/11] net: dsa: realtek: merge rtl83xx and interface modules into realtek-dsa Luiz Angelo Daros de Luca
2024-01-30 23:13 ` [PATCH net-next v5 07/11] net: dsa: realtek: get internal MDIO node by name Luiz Angelo Daros de Luca
2024-01-30 23:13 ` [PATCH net-next v5 08/11] net: dsa: realtek: clean user_mii_bus setup Luiz Angelo Daros de Luca
2024-02-01 22:33   ` Vladimir Oltean
2024-01-30 23:13 ` [PATCH net-next v5 09/11] net: dsa: realtek: migrate user_mii_bus setup to realtek-dsa Luiz Angelo Daros de Luca
2024-02-01 22:45   ` Vladimir Oltean
2024-02-05 22:43     ` Luiz Angelo Daros de Luca
2024-01-30 23:13 ` [PATCH net-next v5 10/11] net: dsa: realtek: use the same mii bus driver for both interfaces Luiz Angelo Daros de Luca
2024-02-01 22:48   ` Vladimir Oltean
2024-01-30 23:13 ` Luiz Angelo Daros de Luca [this message]
2024-02-01 22:58   ` [PATCH net-next v5 11/11] net: dsa: realtek: embed dsa_switch into realtek_priv Vladimir Oltean
2024-02-05 21:49     ` Luiz Angelo Daros de Luca

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20240130-realtek_reverse-v5-11-ecafd9283a07@gmail.com \
    --to=luizluca@gmail.com \
    --cc=alsi@bang-olufsen.dk \
    --cc=andrew@lunn.ch \
    --cc=davem@davemloft.net \
    --cc=edumazet@google.com \
    --cc=f.fainelli@gmail.com \
    --cc=kuba@kernel.org \
    --cc=linus.walleij@linaro.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux@armlinux.org.uk \
    --cc=netdev@vger.kernel.org \
    --cc=olteanv@gmail.com \
    --cc=pabeni@redhat.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).