netdev.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Jakub Sitnicki <jakub@cloudflare.com>
To: netdev@vger.kernel.org, Willem de Bruijn <willemb@google.com>
Cc: "David S. Miller" <davem@davemloft.net>,
	Eric Dumazet <edumazet@google.com>,
	Jakub Kicinski <kuba@kernel.org>, Paolo Abeni <pabeni@redhat.com>,
	kernel-team@cloudflare.com
Subject: [PATCH net-next] selftests: udpgso: Pull up network setup into shell script
Date: Tue, 30 Jan 2024 14:14:22 +0100	[thread overview]
Message-ID: <20240130131422.135965-1-jakub@cloudflare.com> (raw)

udpgso regression test configures routing and device MTU directly through
uAPI (Netlink, ioctl) to do its job. While there is nothing wrong with it,
it takes more effort than doing it from shell.

Looking forward, we would like to extend the udpgso regression tests to
cover the EIO corner case [1], once it gets addressed. That will require a
dummy device and device feature manipulation to set it up. Which means more
Netlink code.

So, in preparation, pull out network configuration into the shell script
part of the test, so it is easily extendable in the future.

Also, because it now easy to setup routing, add a second local IPv6
address. Because the second address is not managed by the kernel, we can
"replace" the corresponding local route with a reduced-MTU one. This
unblocks the disabled "ipv6 connected" test case. Add a similar setup for
IPv4 for symmetry.

[1] https://lore.kernel.org/netdev/87jzqsld6q.fsf@cloudflare.com/

Signed-off-by: Jakub Sitnicki <jakub@cloudflare.com>
---
 tools/testing/selftests/net/udpgso.c  | 134 ++------------------------
 tools/testing/selftests/net/udpgso.sh |  50 ++++++++--
 2 files changed, 48 insertions(+), 136 deletions(-)

diff --git a/tools/testing/selftests/net/udpgso.c b/tools/testing/selftests/net/udpgso.c
index 7badaf215de2..79fd3287ff60 100644
--- a/tools/testing/selftests/net/udpgso.c
+++ b/tools/testing/selftests/net/udpgso.c
@@ -56,7 +56,6 @@ static bool		cfg_do_msgmore;
 static bool		cfg_do_setsockopt;
 static int		cfg_specific_test_id = -1;
 
-static const char	cfg_ifname[] = "lo";
 static unsigned short	cfg_port = 9000;
 
 static char buf[ETH_MAX_MTU];
@@ -69,8 +68,13 @@ struct testcase {
 	int r_len_last;		/* recv(): size of last non-mss dgram, if any */
 };
 
-const struct in6_addr addr6 = IN6ADDR_LOOPBACK_INIT;
-const struct in_addr addr4 = { .s_addr = __constant_htonl(INADDR_LOOPBACK + 2) };
+const struct in6_addr addr6 = {
+	{ { 0x20, 0x01, 0x0d, 0xb8, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0x00, 0x01 } },
+};
+
+const struct in_addr addr4 = {
+	__constant_htonl(0xc0000201), /* 192.0.2.1 */
+};
 
 struct testcase testcases_v4[] = {
 	{
@@ -274,48 +278,6 @@ struct testcase testcases_v6[] = {
 	}
 };
 
-static unsigned int get_device_mtu(int fd, const char *ifname)
-{
-	struct ifreq ifr;
-
-	memset(&ifr, 0, sizeof(ifr));
-
-	strcpy(ifr.ifr_name, ifname);
-
-	if (ioctl(fd, SIOCGIFMTU, &ifr))
-		error(1, errno, "ioctl get mtu");
-
-	return ifr.ifr_mtu;
-}
-
-static void __set_device_mtu(int fd, const char *ifname, unsigned int mtu)
-{
-	struct ifreq ifr;
-
-	memset(&ifr, 0, sizeof(ifr));
-
-	ifr.ifr_mtu = mtu;
-	strcpy(ifr.ifr_name, ifname);
-
-	if (ioctl(fd, SIOCSIFMTU, &ifr))
-		error(1, errno, "ioctl set mtu");
-}
-
-static void set_device_mtu(int fd, int mtu)
-{
-	int val;
-
-	val = get_device_mtu(fd, cfg_ifname);
-	fprintf(stderr, "device mtu (orig): %u\n", val);
-
-	__set_device_mtu(fd, cfg_ifname, mtu);
-	val = get_device_mtu(fd, cfg_ifname);
-	if (val != mtu)
-		error(1, 0, "unable to set device mtu to %u\n", val);
-
-	fprintf(stderr, "device mtu (test): %u\n", val);
-}
-
 static void set_pmtu_discover(int fd, bool is_ipv4)
 {
 	int level, name, val;
@@ -354,81 +316,6 @@ static unsigned int get_path_mtu(int fd, bool is_ipv4)
 	return mtu;
 }
 
-/* very wordy version of system("ip route add dev lo mtu 1500 127.0.0.3/32") */
-static void set_route_mtu(int mtu, bool is_ipv4)
-{
-	struct sockaddr_nl nladdr = { .nl_family = AF_NETLINK };
-	struct nlmsghdr *nh;
-	struct rtattr *rta;
-	struct rtmsg *rt;
-	char data[NLMSG_ALIGN(sizeof(*nh)) +
-		  NLMSG_ALIGN(sizeof(*rt)) +
-		  NLMSG_ALIGN(RTA_LENGTH(sizeof(addr6))) +
-		  NLMSG_ALIGN(RTA_LENGTH(sizeof(int))) +
-		  NLMSG_ALIGN(RTA_LENGTH(0) + RTA_LENGTH(sizeof(int)))];
-	int fd, ret, alen, off = 0;
-
-	alen = is_ipv4 ? sizeof(addr4) : sizeof(addr6);
-
-	fd = socket(AF_NETLINK, SOCK_RAW, NETLINK_ROUTE);
-	if (fd == -1)
-		error(1, errno, "socket netlink");
-
-	memset(data, 0, sizeof(data));
-
-	nh = (void *)data;
-	nh->nlmsg_type = RTM_NEWROUTE;
-	nh->nlmsg_flags = NLM_F_REQUEST | NLM_F_CREATE;
-	off += NLMSG_ALIGN(sizeof(*nh));
-
-	rt = (void *)(data + off);
-	rt->rtm_family = is_ipv4 ? AF_INET : AF_INET6;
-	rt->rtm_table = RT_TABLE_MAIN;
-	rt->rtm_dst_len = alen << 3;
-	rt->rtm_protocol = RTPROT_BOOT;
-	rt->rtm_scope = RT_SCOPE_UNIVERSE;
-	rt->rtm_type = RTN_UNICAST;
-	off += NLMSG_ALIGN(sizeof(*rt));
-
-	rta = (void *)(data + off);
-	rta->rta_type = RTA_DST;
-	rta->rta_len = RTA_LENGTH(alen);
-	if (is_ipv4)
-		memcpy(RTA_DATA(rta), &addr4, alen);
-	else
-		memcpy(RTA_DATA(rta), &addr6, alen);
-	off += NLMSG_ALIGN(rta->rta_len);
-
-	rta = (void *)(data + off);
-	rta->rta_type = RTA_OIF;
-	rta->rta_len = RTA_LENGTH(sizeof(int));
-	*((int *)(RTA_DATA(rta))) = 1; //if_nametoindex("lo");
-	off += NLMSG_ALIGN(rta->rta_len);
-
-	/* MTU is a subtype in a metrics type */
-	rta = (void *)(data + off);
-	rta->rta_type = RTA_METRICS;
-	rta->rta_len = RTA_LENGTH(0) + RTA_LENGTH(sizeof(int));
-	off += NLMSG_ALIGN(rta->rta_len);
-
-	/* now fill MTU subtype. Note that it fits within above rta_len */
-	rta = (void *)(((char *) rta) + RTA_LENGTH(0));
-	rta->rta_type = RTAX_MTU;
-	rta->rta_len = RTA_LENGTH(sizeof(int));
-	*((int *)(RTA_DATA(rta))) = mtu;
-
-	nh->nlmsg_len = off;
-
-	ret = sendto(fd, data, off, 0, (void *)&nladdr, sizeof(nladdr));
-	if (ret != off)
-		error(1, errno, "send netlink: %uB != %uB\n", ret, off);
-
-	if (close(fd))
-		error(1, errno, "close netlink");
-
-	fprintf(stderr, "route mtu (test): %u\n", mtu);
-}
-
 static bool __send_one(int fd, struct msghdr *msg, int flags)
 {
 	int ret;
@@ -591,15 +478,10 @@ static void run_test(struct sockaddr *addr, socklen_t alen)
 	/* Do not fragment these datagrams: only succeed if GSO works */
 	set_pmtu_discover(fdt, addr->sa_family == AF_INET);
 
-	if (cfg_do_connectionless) {
-		set_device_mtu(fdt, CONST_MTU_TEST);
+	if (cfg_do_connectionless)
 		run_all(fdt, fdr, addr, alen);
-	}
 
 	if (cfg_do_connected) {
-		set_device_mtu(fdt, CONST_MTU_TEST + 100);
-		set_route_mtu(CONST_MTU_TEST, addr->sa_family == AF_INET);
-
 		if (connect(fdt, addr, alen))
 			error(1, errno, "connect");
 
diff --git a/tools/testing/selftests/net/udpgso.sh b/tools/testing/selftests/net/udpgso.sh
index fec24f584fe9..d7fb71e132bb 100755
--- a/tools/testing/selftests/net/udpgso.sh
+++ b/tools/testing/selftests/net/udpgso.sh
@@ -3,27 +3,57 @@
 #
 # Run a series of udpgso regression tests
 
+set -o errexit
+set -o nounset
+# set -o xtrace
+
+setup_loopback() {
+  ip addr add dev lo 192.0.2.1/32
+  ip addr add dev lo 2001:db8::1/128 nodad noprefixroute
+}
+
+test_dev_mtu() {
+  setup_loopback
+  # Reduce loopback MTU
+  ip link set dev lo mtu 1500
+}
+
+test_route_mtu() {
+  setup_loopback
+  # Remove default local routes
+  ip route del local 192.0.2.1/32 table local dev lo
+  ip route del local 2001:db8::1/128 table local dev lo
+  # Install local routes with reduced MTU
+  ip route add local 192.0.2.1/32 table local dev lo mtu 1500
+  ip route add local 2001:db8::1/128 table local dev lo mtu 1500
+}
+
+if [ "$#" -gt 0 ]; then
+  "$1"
+  shift 2 # pop "test_*" function arg and "--" delimiter
+  exec "$@"
+fi
+
 echo "ipv4 cmsg"
-./in_netns.sh ./udpgso -4 -C
+./in_netns.sh "$0" test_dev_mtu -- ./udpgso -4 -C
 
 echo "ipv4 setsockopt"
-./in_netns.sh ./udpgso -4 -C -s
+./in_netns.sh "$0" test_dev_mtu -- ./udpgso -4 -C -s
 
 echo "ipv6 cmsg"
-./in_netns.sh ./udpgso -6 -C
+./in_netns.sh "$0" test_dev_mtu -- ./udpgso -6 -C
 
 echo "ipv6 setsockopt"
-./in_netns.sh ./udpgso -6 -C -s
+./in_netns.sh "$0" test_dev_mtu -- ./udpgso -6 -C -s
 
 echo "ipv4 connected"
-./in_netns.sh ./udpgso -4 -c
+./in_netns.sh "$0" test_route_mtu -- ./udpgso -4 -c
 
-# blocked on 2nd loopback address
-# echo "ipv6 connected"
-# ./in_netns.sh ./udpgso -6 -c
+echo "ipv6 connected"
+./in_netns.sh "$0" test_route_mtu -- ./udpgso -6 -c
 
 echo "ipv4 msg_more"
-./in_netns.sh ./udpgso -4 -C -m
+./in_netns.sh "$0" test_dev_mtu -- ./udpgso -4 -C -m
 
 echo "ipv6 msg_more"
-./in_netns.sh ./udpgso -6 -C -m
+./in_netns.sh "$0" test_dev_mtu -- ./udpgso -6 -C -m
-- 
2.43.0


             reply	other threads:[~2024-01-30 13:14 UTC|newest]

Thread overview: 3+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2024-01-30 13:14 Jakub Sitnicki [this message]
2024-01-30 20:26 ` [PATCH net-next] selftests: udpgso: Pull up network setup into shell script Willem de Bruijn
2024-01-31 17:47   ` Jakub Sitnicki

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20240130131422.135965-1-jakub@cloudflare.com \
    --to=jakub@cloudflare.com \
    --cc=davem@davemloft.net \
    --cc=edumazet@google.com \
    --cc=kernel-team@cloudflare.com \
    --cc=kuba@kernel.org \
    --cc=netdev@vger.kernel.org \
    --cc=pabeni@redhat.com \
    --cc=willemb@google.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).