Re: [PATCH net-next] eth: mlx5: link NAPI instances to queues and IRQs

[Joe Damato <jdamato@fastly.com>]

On Mon, Feb 05, 2024 at 05:44:27PM -0800, Rahul Rameshbabu wrote:
> 
> On Mon, 05 Feb, 2024 17:41:52 -0800 Joe Damato <jdamato@fastly.com> wrote:
> > On Mon, Feb 05, 2024 at 05:33:39PM -0800, Rahul Rameshbabu wrote:
> >> 
> >> On Mon, 05 Feb, 2024 17:32:47 -0800 Joe Damato <jdamato@fastly.com> wrote:
> >> > On Mon, Feb 05, 2024 at 05:09:09PM -0800, Rahul Rameshbabu wrote:
> >> >> On Tue, 06 Feb, 2024 01:03:11 +0000 Joe Damato <jdamato@fastly.com> wrote:
> >> >> > Make mlx5 compatible with the newly added netlink queue GET APIs.
> >> >> >
> >> >> > Signed-off-by: Joe Damato <jdamato@fastly.com>
> >> >> > ---
> >> >> >  drivers/net/ethernet/mellanox/mlx5/core/en.h      | 1 +
> >> >> >  drivers/net/ethernet/mellanox/mlx5/core/en_main.c | 8 ++++++++
> >> >> >  2 files changed, 9 insertions(+)
> >> >> >
> >> >> > diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en.h b/drivers/net/ethernet/mellanox/mlx5/core/en.h
> >> >> > index 55c6ace0acd5..3f86ee1831a8 100644
> >> >> > --- a/drivers/net/ethernet/mellanox/mlx5/core/en.h
> >> >> > +++ b/drivers/net/ethernet/mellanox/mlx5/core/en.h
> >> >> > @@ -768,6 +768,7 @@ struct mlx5e_channel {
> >> >> >  	u16                        qos_sqs_size;
> >> >> >  	u8                         num_tc;
> >> >> >  	u8                         lag_port;
> >> >> > +	unsigned int		   irq;
> >> >> >  
> >> >> >  	/* XDP_REDIRECT */
> >> >> >  	struct mlx5e_xdpsq         xdpsq;
> >> >> > diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_main.c b/drivers/net/ethernet/mellanox/mlx5/core/en_main.c
> >> >> > index c8e8f512803e..e1bfff1fb328 100644
> >> >> > --- a/drivers/net/ethernet/mellanox/mlx5/core/en_main.c
> >> >> > +++ b/drivers/net/ethernet/mellanox/mlx5/core/en_main.c
> >> >> > @@ -2473,6 +2473,9 @@ static void mlx5e_close_queues(struct mlx5e_channel *c)
> >> >> >  	mlx5e_close_tx_cqs(c);
> >> >> >  	mlx5e_close_cq(&c->icosq.cq);
> >> >> >  	mlx5e_close_cq(&c->async_icosq.cq);
> >> >> > +
> >> >> > +	netif_queue_set_napi(c->netdev, c->ix, NETDEV_QUEUE_TYPE_TX, NULL);
> >> >> > +	netif_queue_set_napi(c->netdev, c->ix, NETDEV_QUEUE_TYPE_RX, NULL);
> >> >> 
> >> >> This should be set to NULL *before* actually closing the rqs, sqs, and
> >> >> related cqs right? I would expect these two lines to be the first ones
> >> >> called in mlx5e_close_queues. Btw, I think this should be done in
> >> >> mlx5e_deactivate_channel where the NAPI is disabled.
> >> >> 
> >> >> >  }
> >> >> >  
> >> >> >  static u8 mlx5e_enumerate_lag_port(struct mlx5_core_dev *mdev, int ix)
> >> >> > @@ -2558,6 +2561,7 @@ static int mlx5e_open_channel(struct mlx5e_priv *priv, int ix,
> >> >> >  	c->stats    = &priv->channel_stats[ix]->ch;
> >> >> >  	c->aff_mask = irq_get_effective_affinity_mask(irq);
> >> >> >  	c->lag_port = mlx5e_enumerate_lag_port(priv->mdev, ix);
> >> >> > +	c->irq		= irq;
> >> >> >  
> >> >> >  	netif_napi_add(netdev, &c->napi, mlx5e_napi_poll);
> >> >> >  
> >> >> > @@ -2602,6 +2606,10 @@ static void mlx5e_activate_channel(struct mlx5e_channel *c)
> >> >> >  		mlx5e_activate_xsk(c);
> >> >> >  	else
> >> >> >  		mlx5e_activate_rq(&c->rq);
> >> >> > +
> >> >> > +	netif_napi_set_irq(&c->napi, c->irq);
> >> 
> >> One small comment that I missed in my previous iteration. I think the
> >> above should be moved to mlx5e_open_channel right after netif_napi_add.
> >> This avoids needing to save the irq in struct mlx5e_channel.
> >
> > I couldn't move it to mlx5e_open_channel because of how safe_switch_params
> > and the mechanics around that seem to work (at least as far as I could
> > tell).
> >
> > mlx5 seems to create a new set of channels before closing the previous
> > channel. So, moving this logic to open_channels and close_channels means
> > you end up with a flow like this:
> >
> >   - Create new channels (NAPI netlink API is used to set NAPIs)
> >   - Old channels are closed (NAPI netlink API sets NULL and overwrites the
> >     previous NAPI netlink calls)
> >
> > Now, the associations are all NULL.
> >
> > I think moving the calls to active / deactivate fixes that problem, but
> > requires that irq is stored, if I am understanding the driver correctly.
> 
> I believe moving the changes to activate / deactivate channels resolves
> this problem because only one set of channels will be active, so you
> will no longer have dangling association conflicts for the queue ->
> napi. This is partially why I suggested the change in that iteration.

As far as I can tell, it does.
 
> As for netif_napi_set_irq, that alone can be in mlx5e_open_channel (that
> was the intention of my most recent comment. Not that all the other
> associations should be moved as well). I agree that the other
> association calls should be part of activate / deactivate channels.

OK, sure that makes sense. I make that change, too.

> >
> >> >> > +	netif_queue_set_napi(c->netdev, c->ix, NETDEV_QUEUE_TYPE_TX, &c->napi);
> >> >> > +	netif_queue_set_napi(c->netdev, c->ix, NETDEV_QUEUE_TYPE_RX, &c->napi);
> >> >> 
> >> >> It's weird that netlink queue API is being configured in
> >> >> mlx5e_activate_channel and deconfigured in mlx5e_close_queues. This
> >> >> leads to a problem where the napi will be falsely referred to even when
> >> >> we deactivate the channels in mlx5e_switch_priv_channels and may not
> >> >> necessarily get to closing the channels due to an error.
> >> >> 
> >> >> Typically, we use the following clean up patterns.
> >> >> 
> >> >> mlx5e_activate_channel -> mlx5e_deactivate_channel
> >> >> mlx5e_open_queues -> mlx5e_close_queues
> >> >
> >> > OK, I'll move it to mlx5e_deactivate_channel before the NAPI is disabled.
> >> > That makes sense to me.
> >> 
> >> Appreciated. Thank you for the patch btw.
> >
> > Sure, thanks for the review.
>