[PATCH v6 net-next 11/14] net: phy: marvell-88q2xxx: switch to mv88q2xxx_config_aneg

[Dimitri Fedrau <dima.fedrau@gmail.com>]

Switch to mv88q2xxx_config_aneg for Marvell 88Q2220 devices and remove
the mv88q222x_config_aneg function which is basically a copy of the
mv88q2xxx_config_aneg function.

Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Dimitri Fedrau <dima.fedrau@gmail.com>
---
 drivers/net/phy/marvell-88q2xxx.c | 13 +------------
 1 file changed, 1 insertion(+), 12 deletions(-)

diff --git a/drivers/net/phy/marvell-88q2xxx.c b/drivers/net/phy/marvell-88q2xxx.c
index fa75d34d1d04..58140dfd75cb 100644
--- a/drivers/net/phy/marvell-88q2xxx.c
+++ b/drivers/net/phy/marvell-88q2xxx.c
@@ -685,17 +685,6 @@ static int mv88q222x_soft_reset(struct phy_device *phydev)
 	return 0;
 }
 
-static int mv88q222x_config_aneg(struct phy_device *phydev)
-{
-	int ret;
-
-	ret = genphy_c45_config_aneg(phydev);
-	if (ret)
-		return ret;
-
-	return mv88q222x_soft_reset(phydev);
-}
-
 static int mv88q222x_revb0_config_init(struct phy_device *phydev)
 {
 	int ret, i;
@@ -829,7 +818,7 @@ static struct phy_driver mv88q2xxx_driver[] = {
 		.flags			= PHY_POLL_CABLE_TEST,
 		.probe			= mv88q2xxx_probe,
 		.get_features		= mv88q2xxx_get_features,
-		.config_aneg		= mv88q222x_config_aneg,
+		.config_aneg		= mv88q2xxx_config_aneg,
 		.aneg_done		= genphy_c45_aneg_done,
 		.config_init		= mv88q222x_revb0_config_init,
 		.read_status		= mv88q2xxx_read_status,
-- 
2.39.2