[PATCH v5 net-next 1/5] amd-xgbe: reorganize the code of XPCS access

[Raju Rangoju <Raju.Rangoju@amd.com>]

The xgbe_{read/write}_mmd_regs_v* functions have common code which can
be moved to helper functions. Add new helper functions to calculate the
mmd_address for v1/v2 of xpcs access.

Signed-off-by: Raju Rangoju <Raju.Rangoju@amd.com>
---
 drivers/net/ethernet/amd/xgbe/xgbe-dev.c | 63 ++++++++++--------------
 1 file changed, 27 insertions(+), 36 deletions(-)

diff --git a/drivers/net/ethernet/amd/xgbe/xgbe-dev.c b/drivers/net/ethernet/amd/xgbe/xgbe-dev.c
index f393228d41c7..197da2993471 100644
--- a/drivers/net/ethernet/amd/xgbe/xgbe-dev.c
+++ b/drivers/net/ethernet/amd/xgbe/xgbe-dev.c
@@ -1150,18 +1150,17 @@ static int xgbe_set_gpio(struct xgbe_prv_data *pdata, unsigned int gpio)
 	return 0;
 }
 
-static int xgbe_read_mmd_regs_v2(struct xgbe_prv_data *pdata, int prtad,
-				 int mmd_reg)
+static unsigned int get_mmd_address(struct xgbe_prv_data *pdata, int mmd_reg)
 {
-	unsigned long flags;
-	unsigned int mmd_address, index, offset;
-	int mmd_data;
-
-	if (mmd_reg & XGBE_ADDR_C45)
-		mmd_address = mmd_reg & ~XGBE_ADDR_C45;
-	else
-		mmd_address = (pdata->mdio_mmd << 16) | (mmd_reg & 0xffff);
+	return (mmd_reg & XGBE_ADDR_C45) ?
+		mmd_reg & ~XGBE_ADDR_C45 :
+		(pdata->mdio_mmd << 16) | (mmd_reg & 0xffff);
+}
 
+static void get_pcs_index_and_offset(struct xgbe_prv_data *pdata,
+				     unsigned int mmd_address,
+				     unsigned int *index, unsigned int *offset)
+{
 	/* The PCS registers are accessed using mmio. The underlying
 	 * management interface uses indirect addressing to access the MMD
 	 * register sets. This requires accessing of the PCS register in two
@@ -1172,8 +1171,20 @@ static int xgbe_read_mmd_regs_v2(struct xgbe_prv_data *pdata, int prtad,
 	 * offset 1 bit and reading 16 bits of data.
 	 */
 	mmd_address <<= 1;
-	index = mmd_address & ~pdata->xpcs_window_mask;
-	offset = pdata->xpcs_window + (mmd_address & pdata->xpcs_window_mask);
+	*index = mmd_address & ~pdata->xpcs_window_mask;
+	*offset = pdata->xpcs_window + (mmd_address & pdata->xpcs_window_mask);
+}
+
+static int xgbe_read_mmd_regs_v2(struct xgbe_prv_data *pdata, int prtad,
+				 int mmd_reg)
+{
+	unsigned long flags;
+	unsigned int mmd_address, index, offset;
+	int mmd_data;
+
+	mmd_address = get_mmd_address(pdata, mmd_reg);
+
+	get_pcs_index_and_offset(pdata, mmd_address, &index, &offset);
 
 	spin_lock_irqsave(&pdata->xpcs_lock, flags);
 	XPCS32_IOWRITE(pdata, pdata->xpcs_window_sel_reg, index);
@@ -1189,23 +1200,9 @@ static void xgbe_write_mmd_regs_v2(struct xgbe_prv_data *pdata, int prtad,
 	unsigned long flags;
 	unsigned int mmd_address, index, offset;
 
-	if (mmd_reg & XGBE_ADDR_C45)
-		mmd_address = mmd_reg & ~XGBE_ADDR_C45;
-	else
-		mmd_address = (pdata->mdio_mmd << 16) | (mmd_reg & 0xffff);
+	mmd_address = get_mmd_address(pdata, mmd_reg);
 
-	/* The PCS registers are accessed using mmio. The underlying
-	 * management interface uses indirect addressing to access the MMD
-	 * register sets. This requires accessing of the PCS register in two
-	 * phases, an address phase and a data phase.
-	 *
-	 * The mmio interface is based on 16-bit offsets and values. All
-	 * register offsets must therefore be adjusted by left shifting the
-	 * offset 1 bit and writing 16 bits of data.
-	 */
-	mmd_address <<= 1;
-	index = mmd_address & ~pdata->xpcs_window_mask;
-	offset = pdata->xpcs_window + (mmd_address & pdata->xpcs_window_mask);
+	get_pcs_index_and_offset(pdata, mmd_address, &index, &offset);
 
 	spin_lock_irqsave(&pdata->xpcs_lock, flags);
 	XPCS32_IOWRITE(pdata, pdata->xpcs_window_sel_reg, index);
@@ -1220,10 +1217,7 @@ static int xgbe_read_mmd_regs_v1(struct xgbe_prv_data *pdata, int prtad,
 	unsigned int mmd_address;
 	int mmd_data;
 
-	if (mmd_reg & XGBE_ADDR_C45)
-		mmd_address = mmd_reg & ~XGBE_ADDR_C45;
-	else
-		mmd_address = (pdata->mdio_mmd << 16) | (mmd_reg & 0xffff);
+	mmd_address = get_mmd_address(pdata, mmd_reg);
 
 	/* The PCS registers are accessed using mmio. The underlying APB3
 	 * management interface uses indirect addressing to access the MMD
@@ -1248,10 +1242,7 @@ static void xgbe_write_mmd_regs_v1(struct xgbe_prv_data *pdata, int prtad,
 	unsigned int mmd_address;
 	unsigned long flags;
 
-	if (mmd_reg & XGBE_ADDR_C45)
-		mmd_address = mmd_reg & ~XGBE_ADDR_C45;
-	else
-		mmd_address = (pdata->mdio_mmd << 16) | (mmd_reg & 0xffff);
+	mmd_address = get_mmd_address(pdata, mmd_reg);
 
 	/* The PCS registers are accessed using mmio. The underlying APB3
 	 * management interface uses indirect addressing to access the MMD
-- 
2.34.1