[PATCH v7 net-next 07/14] net: phy: marvell-88q2xxx: add suspend / resume ops

[Dimitri Fedrau <dima.fedrau@gmail.com>]

Add suspend/resume ops for Marvell 88Q2xxx devices.

Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Dimitri Fedrau <dima.fedrau@gmail.com>
---
 drivers/net/phy/marvell-88q2xxx.c | 34 +++++++++++++++++++++++++++++++
 1 file changed, 34 insertions(+)

diff --git a/drivers/net/phy/marvell-88q2xxx.c b/drivers/net/phy/marvell-88q2xxx.c
index 7c7517af346b..8b8275552014 100644
--- a/drivers/net/phy/marvell-88q2xxx.c
+++ b/drivers/net/phy/marvell-88q2xxx.c
@@ -461,6 +461,38 @@ static irqreturn_t mv88q2xxx_handle_interrupt(struct phy_device *phydev)
 	return IRQ_HANDLED;
 }
 
+static int mv88q2xxx_suspend(struct phy_device *phydev)
+{
+	int ret;
+
+	/* Disable PHY interrupts */
+	if (phy_interrupt_is_valid(phydev)) {
+		phydev->interrupts = PHY_INTERRUPT_DISABLED;
+		ret = mv88q2xxx_config_intr(phydev);
+		if (ret)
+			return ret;
+	}
+
+	return phy_set_bits_mmd(phydev, MDIO_MMD_PMAPMD, MDIO_CTRL1,
+				MDIO_CTRL1_LPOWER);
+}
+
+static int mv88q2xxx_resume(struct phy_device *phydev)
+{
+	int ret;
+
+	/* Enable PHY interrupts */
+	if (phy_interrupt_is_valid(phydev)) {
+		phydev->interrupts = PHY_INTERRUPT_ENABLED;
+		ret = mv88q2xxx_config_intr(phydev);
+		if (ret)
+			return ret;
+	}
+
+	return phy_clear_bits_mmd(phydev, MDIO_MMD_PMAPMD, MDIO_CTRL1,
+				  MDIO_CTRL1_LPOWER);
+}
+
 static int mv88q222x_soft_reset(struct phy_device *phydev)
 {
 	int ret;
@@ -566,6 +598,8 @@ static struct phy_driver mv88q2xxx_driver[] = {
 		.set_loopback		= genphy_c45_loopback,
 		.get_sqi		= mv88q2xxx_get_sqi,
 		.get_sqi_max		= mv88q2xxx_get_sqi_max,
+		.suspend		= mv88q2xxx_suspend,
+		.resume			= mv88q2xxx_resume,
 	},
 };
 
-- 
2.39.2