From: Justin Chen <justin.chen@broadcom.com>
To: netdev@vger.kernel.org
Cc: bcm-kernel-feedback-list@broadcom.com,
florian.fainelli@broadcom.com, davem@davemloft.net,
edumazet@google.com, kuba@kernel.org, pabeni@redhat.com,
robh+dt@kernel.org, krzysztof.kozlowski+dt@linaro.org,
conor+dt@kernel.org, opendmb@gmail.com, andrew@lunn.ch,
hkallweit1@gmail.com, linux@armlinux.org.uk, rafal@milecki.pl,
devicetree@vger.kernel.org,
Justin Chen <justin.chen@broadcom.com>
Subject: [PATCH net-next 6/6] net: bcmasp: Add support for PHY interrupts
Date: Thu, 22 Feb 2024 12:56:44 -0800 [thread overview]
Message-ID: <20240222205644.707326-7-justin.chen@broadcom.com> (raw)
In-Reply-To: <20240222205644.707326-1-justin.chen@broadcom.com>
[-- Attachment #1: Type: text/plain, Size: 3464 bytes --]
Hook up the phy interrupts for internal phys to reduce mdio traffic
and improve responsiveness of link changes.
Signed-off-by: Justin Chen <justin.chen@broadcom.com>
---
drivers/net/ethernet/broadcom/asp2/bcmasp.c | 17 +++++++++++++++++
drivers/net/ethernet/broadcom/asp2/bcmasp.h | 4 ++++
.../net/ethernet/broadcom/asp2/bcmasp_intf.c | 5 +++++
3 files changed, 26 insertions(+)
diff --git a/drivers/net/ethernet/broadcom/asp2/bcmasp.c b/drivers/net/ethernet/broadcom/asp2/bcmasp.c
index 3086b0b9b784..a2627c2a6e45 100644
--- a/drivers/net/ethernet/broadcom/asp2/bcmasp.c
+++ b/drivers/net/ethernet/broadcom/asp2/bcmasp.c
@@ -31,6 +31,20 @@ static void _intr2_mask_set(struct bcmasp_priv *priv, u32 mask)
priv->irq_mask |= mask;
}
+void bcmasp_enable_phy_irq(struct bcmasp_intf *intf, int en)
+{
+ struct bcmasp_priv *priv = intf->parent;
+
+ /* Only supported with internal phys */
+ if (!intf->internal_phy)
+ return;
+
+ if (en)
+ _intr2_mask_clear(priv, ASP_INTR2_PHY_EVENT(intf->channel));
+ else
+ _intr2_mask_set(priv, ASP_INTR2_PHY_EVENT(intf->channel));
+}
+
void bcmasp_enable_tx_irq(struct bcmasp_intf *intf, int en)
{
struct bcmasp_priv *priv = intf->parent;
@@ -79,6 +93,9 @@ static void bcmasp_intr2_handling(struct bcmasp_intf *intf, u32 status)
__napi_schedule_irqoff(&intf->tx_napi);
}
}
+
+ if (status & ASP_INTR2_PHY_EVENT(intf->channel))
+ phy_mac_interrupt(intf->ndev->phydev);
}
static irqreturn_t bcmasp_isr(int irq, void *data)
diff --git a/drivers/net/ethernet/broadcom/asp2/bcmasp.h b/drivers/net/ethernet/broadcom/asp2/bcmasp.h
index 127a5340625e..f93cb3da44b0 100644
--- a/drivers/net/ethernet/broadcom/asp2/bcmasp.h
+++ b/drivers/net/ethernet/broadcom/asp2/bcmasp.h
@@ -19,6 +19,8 @@
#define ASP_INTR2_TX_DESC(intr) BIT((intr) + 14)
#define ASP_INTR2_UMC0_WAKE BIT(22)
#define ASP_INTR2_UMC1_WAKE BIT(28)
+#define ASP_INTR2_PHY_EVENT(intr) ((intr) ? BIT(30) | BIT(31) : \
+ BIT(24) | BIT(25))
#define ASP_WAKEUP_INTR2_OFFSET 0x1200
#define ASP_WAKEUP_INTR2_STATUS 0x0
@@ -556,6 +558,8 @@ void bcmasp_enable_tx_irq(struct bcmasp_intf *intf, int en);
void bcmasp_enable_rx_irq(struct bcmasp_intf *intf, int en);
+void bcmasp_enable_phy_irq(struct bcmasp_intf *intf, int en);
+
void bcmasp_flush_rx_port(struct bcmasp_intf *intf);
extern const struct ethtool_ops bcmasp_ethtool_ops;
diff --git a/drivers/net/ethernet/broadcom/asp2/bcmasp_intf.c b/drivers/net/ethernet/broadcom/asp2/bcmasp_intf.c
index 1aed28b06309..a2fa8dcbe387 100644
--- a/drivers/net/ethernet/broadcom/asp2/bcmasp_intf.c
+++ b/drivers/net/ethernet/broadcom/asp2/bcmasp_intf.c
@@ -382,6 +382,7 @@ static void bcmasp_netif_start(struct net_device *dev)
bcmasp_enable_rx_irq(intf, 1);
bcmasp_enable_tx_irq(intf, 1);
+ bcmasp_enable_phy_irq(intf, 1);
phy_start(dev->phydev);
}
@@ -890,6 +891,7 @@ static void bcmasp_netif_deinit(struct net_device *dev)
/* Disable interrupts */
bcmasp_enable_tx_irq(intf, 0);
bcmasp_enable_rx_irq(intf, 0);
+ bcmasp_enable_phy_irq(intf, 0);
netif_napi_del(&intf->tx_napi);
netif_napi_del(&intf->rx_napi);
@@ -1027,6 +1029,9 @@ static int bcmasp_netif_init(struct net_device *dev, bool phy_connect)
netdev_err(dev, "could not attach to PHY\n");
goto err_phy_disable;
}
+
+ if (intf->internal_phy)
+ dev->phydev->irq = PHY_MAC_INTERRUPT;
} else if (!intf->wolopts) {
ret = phy_resume(dev->phydev);
if (ret)
--
2.34.1
[-- Attachment #2: S/MIME Cryptographic Signature --]
[-- Type: application/pkcs7-signature, Size: 4206 bytes --]
next prev parent reply other threads:[~2024-02-22 20:57 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-02-22 20:56 [PATCH net-next 0/6] Support for ASP 2.2 and optimizations Justin Chen
2024-02-22 20:56 ` [PATCH net-next 1/6] dt-bindings: net: brcm,unimac-mdio: Add asp-v2.2 Justin Chen
2024-02-22 21:53 ` Florian Fainelli
2024-02-22 20:56 ` [PATCH net-next 2/6] dt-bindings: net: brcm,asp-v2.0: " Justin Chen
2024-02-22 21:53 ` Florian Fainelli
2024-02-22 20:56 ` [PATCH net-next 3/6] net: bcmasp: Add support for ASP 2.2 Justin Chen
2024-02-22 21:54 ` Florian Fainelli
2024-02-22 20:56 ` [PATCH net-next 4/6] net: phy: mdio-bcm-unimac: Add asp v2.2 support Justin Chen
2024-02-22 21:55 ` Florian Fainelli
2024-02-22 20:56 ` [PATCH net-next 5/6] net: bcmasp: Keep buffers through power management Justin Chen
2024-02-22 21:55 ` Florian Fainelli
2024-02-22 20:56 ` Justin Chen [this message]
2024-02-22 21:56 ` [PATCH net-next 6/6] net: bcmasp: Add support for PHY interrupts Florian Fainelli
2024-02-23 0:01 ` Jakub Kicinski
2024-02-23 0:02 ` Jakub Kicinski
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20240222205644.707326-7-justin.chen@broadcom.com \
--to=justin.chen@broadcom.com \
--cc=andrew@lunn.ch \
--cc=bcm-kernel-feedback-list@broadcom.com \
--cc=conor+dt@kernel.org \
--cc=davem@davemloft.net \
--cc=devicetree@vger.kernel.org \
--cc=edumazet@google.com \
--cc=florian.fainelli@broadcom.com \
--cc=hkallweit1@gmail.com \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=kuba@kernel.org \
--cc=linux@armlinux.org.uk \
--cc=netdev@vger.kernel.org \
--cc=opendmb@gmail.com \
--cc=pabeni@redhat.com \
--cc=rafal@milecki.pl \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).