[PATCH RFC net-next 3/6] net: phy: realtek: rtlgen_get_speed(): Pass register value as argument

[Eric Woudstra <ericwouds@gmail.com>]

The value of the register to determine the speed, is retrieved
differently when using Clause 45 only.

To use the rtlgen_get_speed() function in this case, pass the value of the
register as argument to rtlgen_get_speed().

The function would then always return 0, so change it to void.

Signed-off-by: Eric Woudstra <ericwouds@gmail.com>
---
 drivers/net/phy/realtek.c | 22 ++++++++++------------
 1 file changed, 10 insertions(+), 12 deletions(-)

diff --git a/drivers/net/phy/realtek.c b/drivers/net/phy/realtek.c
index 75c4f3e14371..e7c42ec18971 100644
--- a/drivers/net/phy/realtek.c
+++ b/drivers/net/phy/realtek.c
@@ -541,16 +541,10 @@ static int rtl8366rb_config_init(struct phy_device *phydev)
 }
 
 /* get actual speed to cover the downshift case */
-static int rtlgen_get_speed(struct phy_device *phydev)
+static void rtlgen_get_speed(struct phy_device *phydev, int val)
 {
-	int val;
-
 	if (!phydev->link)
-		return 0;
-
-	val = phy_read_paged(phydev, 0xa43, 0x12);
-	if (val < 0)
-		return val;
+		return;
 
 	switch (val & RTLGEN_SPEED_MASK) {
 	case 0x0000:
@@ -574,19 +568,23 @@ static int rtlgen_get_speed(struct phy_device *phydev)
 	default:
 		break;
 	}
-
-	return 0;
 }
 
 static int rtlgen_read_status(struct phy_device *phydev)
 {
-	int ret;
+	int ret, val;
 
 	ret = genphy_read_status(phydev);
 	if (ret < 0)
 		return ret;
 
-	return rtlgen_get_speed(phydev);
+	val = phy_read_paged(phydev, 0xa43, 0x12);
+	if (val < 0)
+		return val;
+
+	rtlgen_get_speed(phydev, val);
+
+	return 0;
 }
 
 static int rtlgen_read_mmd(struct phy_device *phydev, int devnum, u16 regnum)
-- 
2.42.1