[PATCH 0/3] net/e1000e, igb, igc: Remove redundant runtime resume

[PATCH 0/3] net/e1000e, igb, igc: Remove redundant runtime resume

[Bjorn Helgaas]

From: Bjorn Helgaas <bhelgaas@google.com>

e1000e, igb, and igc all have code to runtime resume the device during
ethtool operations.

Since f32a21376573 ("ethtool: runtime-resume netdev parent before ethtool
ioctl ops"), dev_ethtool() does this for us, so remove it from the
individual drivers.

Bjorn Helgaas (3):
  e1000e: Remove redundant runtime resume for ethtool_ops
  igb: Remove redundant runtime resume for ethtool_ops
  igc: Remove redundant runtime resume for ethtool ops

 drivers/net/ethernet/intel/e1000e/ethtool.c  | 62 ++------------------
 drivers/net/ethernet/intel/igb/igb_ethtool.c | 15 -----
 drivers/net/ethernet/intel/igc/igc_ethtool.c | 17 ------
 3 files changed, 6 insertions(+), 88 deletions(-)

-- 
2.34.1

[PATCH 1/3] e1000e: Remove redundant runtime resume for ethtool_ops

[Bjorn Helgaas]

From: Bjorn Helgaas <bhelgaas@google.com>

e60b22c5b7e5 ("e1000e: fix accessing to suspended device") added
ethtool_ops.begin() and .complete(), which used pm_runtime_get_sync() to
resume suspended devices before any ethtool_ops callback and allow suspend
after it completed.

3ef672ab1862 ("e1000e: ethtool unnecessarily takes device out of RPM
suspend") removed ethtool_ops.begin() and .complete() and instead did
pm_runtime_get_sync() only in the individual ethtool_ops callbacks that
access device registers.

Subsequently, f32a21376573 ("ethtool: runtime-resume netdev parent before
ethtool ioctl ops") added pm_runtime_get_sync() in the dev_ethtool() path,
so the device is resumed before *any* ethtool_ops callback, as it was
before 3ef672ab1862.

Remove most runtime resumes from ethtool_ops, which are now redundant
because the resume has already been done by dev_ethtool().  This is
essentially a revert of 3ef672ab1862 ("e1000e: ethtool unnecessarily takes
device out of RPM suspend").

There are a couple subtleties:

  - Prior to 3ef672ab1862, the device was resumed only for the duration of
    a single ethtool callback.  3ef672ab1862 changed e1000_set_phys_id() so
    the device was resumed for ETHTOOL_ID_ACTIVE and remained resumed until
    a subsequent callback for ETHTOOL_ID_INACTIVE.  Preserve that part of
    3ef672ab1862 so the device will not be runtime suspended while in the
    ETHTOOL_ID_ACTIVE state.

  - 3ef672ab1862 added "if (!pm_runtime_suspended())" in before reading the
    STATUS register in e1000_get_settings().  This was racy and is now
    unnecessary because dev_ethtool() has resumed the device already, so
    revert that.

Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
---
 drivers/net/ethernet/intel/e1000e/ethtool.c | 62 ++-------------------
 1 file changed, 6 insertions(+), 56 deletions(-)

diff --git a/drivers/net/ethernet/intel/e1000e/ethtool.c b/drivers/net/ethernet/intel/e1000e/ethtool.c
index dc553c51d79a..85da20778e0f 100644
--- a/drivers/net/ethernet/intel/e1000e/ethtool.c
+++ b/drivers/net/ethernet/intel/e1000e/ethtool.c
@@ -156,7 +156,7 @@ static int e1000_get_link_ksettings(struct net_device *netdev,
 			speed = adapter->link_speed;
 			cmd->base.duplex = adapter->link_duplex - 1;
 		}
-	} else if (!pm_runtime_suspended(netdev->dev.parent)) {
+	} else {
 		u32 status = er32(STATUS);
 
 		if (status & E1000_STATUS_LU) {
@@ -274,16 +274,13 @@ static int e1000_set_link_ksettings(struct net_device *netdev,
 	ethtool_convert_link_mode_to_legacy_u32(&advertising,
 						cmd->link_modes.advertising);
 
-	pm_runtime_get_sync(netdev->dev.parent);
-
 	/* When SoL/IDER sessions are active, autoneg/speed/duplex
 	 * cannot be changed
 	 */
 	if (hw->phy.ops.check_reset_block &&
 	    hw->phy.ops.check_reset_block(hw)) {
 		e_err("Cannot change link characteristics when SoL/IDER is active.\n");
-		ret_val = -EINVAL;
-		goto out;
+		return -EINVAL;
 	}
 
 	/* MDI setting is only allowed when autoneg enabled because
@@ -291,16 +288,13 @@ static int e1000_set_link_ksettings(struct net_device *netdev,
 	 * duplex is forced.
 	 */
 	if (cmd->base.eth_tp_mdix_ctrl) {
-		if (hw->phy.media_type != e1000_media_type_copper) {
-			ret_val = -EOPNOTSUPP;
-			goto out;
-		}
+		if (hw->phy.media_type != e1000_media_type_copper)
+			return -EOPNOTSUPP;
 
 		if ((cmd->base.eth_tp_mdix_ctrl != ETH_TP_MDI_AUTO) &&
 		    (cmd->base.autoneg != AUTONEG_ENABLE)) {
 			e_err("forcing MDI/MDI-X state is not supported when link speed and/or duplex are forced\n");
-			ret_val = -EINVAL;
-			goto out;
+			return -EINVAL;
 		}
 	}
 
@@ -347,7 +341,6 @@ static int e1000_set_link_ksettings(struct net_device *netdev,
 	}
 
 out:
-	pm_runtime_put_sync(netdev->dev.parent);
 	clear_bit(__E1000_RESETTING, &adapter->state);
 	return ret_val;
 }
@@ -383,8 +376,6 @@ static int e1000_set_pauseparam(struct net_device *netdev,
 	while (test_and_set_bit(__E1000_RESETTING, &adapter->state))
 		usleep_range(1000, 2000);
 
-	pm_runtime_get_sync(netdev->dev.parent);
-
 	if (adapter->fc_autoneg == AUTONEG_ENABLE) {
 		hw->fc.requested_mode = e1000_fc_default;
 		if (netif_running(adapter->netdev)) {
@@ -417,7 +408,6 @@ static int e1000_set_pauseparam(struct net_device *netdev,
 	}
 
 out:
-	pm_runtime_put_sync(netdev->dev.parent);
 	clear_bit(__E1000_RESETTING, &adapter->state);
 	return retval;
 }
@@ -448,8 +438,6 @@ static void e1000_get_regs(struct net_device *netdev,
 	u32 *regs_buff = p;
 	u16 phy_data;
 
-	pm_runtime_get_sync(netdev->dev.parent);
-
 	memset(p, 0, E1000_REGS_LEN * sizeof(u32));
 
 	regs->version = (1u << 24) |
@@ -495,8 +483,6 @@ static void e1000_get_regs(struct net_device *netdev,
 	e1e_rphy(hw, MII_STAT1000, &phy_data);
 	regs_buff[24] = (u32)phy_data;	/* phy local receiver status */
 	regs_buff[25] = regs_buff[24];	/* phy remote receiver status */
-
-	pm_runtime_put_sync(netdev->dev.parent);
 }
 
 static int e1000_get_eeprom_len(struct net_device *netdev)
@@ -529,8 +515,6 @@ static int e1000_get_eeprom(struct net_device *netdev,
 	if (!eeprom_buff)
 		return -ENOMEM;
 
-	pm_runtime_get_sync(netdev->dev.parent);
-
 	if (hw->nvm.type == e1000_nvm_eeprom_spi) {
 		ret_val = e1000_read_nvm(hw, first_word,
 					 last_word - first_word + 1,
@@ -544,8 +528,6 @@ static int e1000_get_eeprom(struct net_device *netdev,
 		}
 	}
 
-	pm_runtime_put_sync(netdev->dev.parent);
-
 	if (ret_val) {
 		/* a read error occurred, throw away the result */
 		memset(eeprom_buff, 0xff, sizeof(u16) *
@@ -595,8 +577,6 @@ static int e1000_set_eeprom(struct net_device *netdev,
 
 	ptr = (void *)eeprom_buff;
 
-	pm_runtime_get_sync(netdev->dev.parent);
-
 	if (eeprom->offset & 1) {
 		/* need read/modify/write of first changed EEPROM word */
 		/* only the second byte of the word is being modified */
@@ -637,7 +617,6 @@ static int e1000_set_eeprom(struct net_device *netdev,
 		ret_val = e1000e_update_nvm_checksum(hw);
 
 out:
-	pm_runtime_put_sync(netdev->dev.parent);
 	kfree(eeprom_buff);
 	return ret_val;
 }
@@ -733,8 +712,6 @@ static int e1000_set_ringparam(struct net_device *netdev,
 		}
 	}
 
-	pm_runtime_get_sync(netdev->dev.parent);
-
 	e1000e_down(adapter, true);
 
 	/* We can't just free everything and then setup again, because the
@@ -773,7 +750,6 @@ static int e1000_set_ringparam(struct net_device *netdev,
 		e1000e_free_tx_resources(temp_tx);
 err_setup:
 	e1000e_up(adapter);
-	pm_runtime_put_sync(netdev->dev.parent);
 free_temp:
 	vfree(temp_tx);
 	vfree(temp_rx);
@@ -1816,8 +1792,6 @@ static void e1000_diag_test(struct net_device *netdev,
 	u8 autoneg;
 	bool if_running = netif_running(netdev);
 
-	pm_runtime_get_sync(netdev->dev.parent);
-
 	set_bit(__E1000_TESTING, &adapter->state);
 
 	if (!if_running) {
@@ -1903,8 +1877,6 @@ static void e1000_diag_test(struct net_device *netdev,
 	}
 
 	msleep_interruptible(4 * 1000);
-
-	pm_runtime_put_sync(netdev->dev.parent);
 }
 
 static void e1000_get_wol(struct net_device *netdev,
@@ -2046,15 +2018,11 @@ static int e1000_set_coalesce(struct net_device *netdev,
 		adapter->itr_setting = adapter->itr & ~3;
 	}
 
-	pm_runtime_get_sync(netdev->dev.parent);
-
 	if (adapter->itr_setting != 0)
 		e1000e_write_itr(adapter, adapter->itr);
 	else
 		e1000e_write_itr(adapter, 0);
 
-	pm_runtime_put_sync(netdev->dev.parent);
-
 	return 0;
 }
 
@@ -2068,9 +2036,7 @@ static int e1000_nway_reset(struct net_device *netdev)
 	if (!adapter->hw.mac.autoneg)
 		return -EINVAL;
 
-	pm_runtime_get_sync(netdev->dev.parent);
 	e1000e_reinit_locked(adapter);
-	pm_runtime_put_sync(netdev->dev.parent);
 
 	return 0;
 }
@@ -2084,12 +2050,8 @@ static void e1000_get_ethtool_stats(struct net_device *netdev,
 	int i;
 	char *p = NULL;
 
-	pm_runtime_get_sync(netdev->dev.parent);
-
 	dev_get_stats(netdev, &net_stats);
 
-	pm_runtime_put_sync(netdev->dev.parent);
-
 	for (i = 0; i < E1000_GLOBAL_STATS_LEN; i++) {
 		switch (e1000_gstrings_stats[i].type) {
 		case NETDEV_STATS:
@@ -2146,9 +2108,7 @@ static int e1000_get_rxnfc(struct net_device *netdev,
 		struct e1000_hw *hw = &adapter->hw;
 		u32 mrqc;
 
-		pm_runtime_get_sync(netdev->dev.parent);
 		mrqc = er32(MRQC);
-		pm_runtime_put_sync(netdev->dev.parent);
 
 		if (!(mrqc & E1000_MRQC_RSS_FIELD_MASK))
 			return 0;
@@ -2211,13 +2171,9 @@ static int e1000e_get_eee(struct net_device *netdev, struct ethtool_keee *edata)
 		return -EOPNOTSUPP;
 	}
 
-	pm_runtime_get_sync(netdev->dev.parent);
-
 	ret_val = hw->phy.ops.acquire(hw);
-	if (ret_val) {
-		pm_runtime_put_sync(netdev->dev.parent);
+	if (ret_val)
 		return -EBUSY;
-	}
 
 	/* EEE Capability */
 	ret_val = e1000_read_emi_reg_locked(hw, cap_addr, &phy_data);
@@ -2257,8 +2213,6 @@ static int e1000e_get_eee(struct net_device *netdev, struct ethtool_keee *edata)
 	if (ret_val)
 		ret_val = -ENODATA;
 
-	pm_runtime_put_sync(netdev->dev.parent);
-
 	return ret_val;
 }
 
@@ -2299,16 +2253,12 @@ static int e1000e_set_eee(struct net_device *netdev, struct ethtool_keee *edata)
 
 	hw->dev_spec.ich8lan.eee_disable = !edata->eee_enabled;
 
-	pm_runtime_get_sync(netdev->dev.parent);
-
 	/* reset the link */
 	if (netif_running(netdev))
 		e1000e_reinit_locked(adapter);
 	else
 		e1000e_reset(adapter);
 
-	pm_runtime_put_sync(netdev->dev.parent);
-
 	return 0;
 }
 
-- 
2.34.1

Re: [PATCH 1/3] e1000e: Remove redundant runtime resume for ethtool_ops

[Simon Horman]

On Mon, Mar 25, 2024 at 05:29:49PM -0500, Bjorn Helgaas wrote:
> From: Bjorn Helgaas <bhelgaas@google.com>
> 
> e60b22c5b7e5 ("e1000e: fix accessing to suspended device") added
> ethtool_ops.begin() and .complete(), which used pm_runtime_get_sync() to
> resume suspended devices before any ethtool_ops callback and allow suspend
> after it completed.
> 
> 3ef672ab1862 ("e1000e: ethtool unnecessarily takes device out of RPM
> suspend") removed ethtool_ops.begin() and .complete() and instead did
> pm_runtime_get_sync() only in the individual ethtool_ops callbacks that
> access device registers.
> 
> Subsequently, f32a21376573 ("ethtool: runtime-resume netdev parent before
> ethtool ioctl ops") added pm_runtime_get_sync() in the dev_ethtool() path,
> so the device is resumed before *any* ethtool_ops callback, as it was
> before 3ef672ab1862.
> 
> Remove most runtime resumes from ethtool_ops, which are now redundant
> because the resume has already been done by dev_ethtool().  This is
> essentially a revert of 3ef672ab1862 ("e1000e: ethtool unnecessarily takes
> device out of RPM suspend").
> 
> There are a couple subtleties:
> 
>   - Prior to 3ef672ab1862, the device was resumed only for the duration of
>     a single ethtool callback.  3ef672ab1862 changed e1000_set_phys_id() so
>     the device was resumed for ETHTOOL_ID_ACTIVE and remained resumed until
>     a subsequent callback for ETHTOOL_ID_INACTIVE.  Preserve that part of
>     3ef672ab1862 so the device will not be runtime suspended while in the
>     ETHTOOL_ID_ACTIVE state.
> 
>   - 3ef672ab1862 added "if (!pm_runtime_suspended())" in before reading the
>     STATUS register in e1000_get_settings().  This was racy and is now
>     unnecessary because dev_ethtool() has resumed the device already, so
>     revert that.
> 
> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>

Reviewed-by: Simon Horman <horms@kernel.org>

Re: [Intel-wired-lan] [PATCH 1/3] e1000e: Remove redundant runtime resume for ethtool_ops

[naamax.meir]

On 3/26/2024 00:29, Bjorn Helgaas wrote:
> From: Bjorn Helgaas <bhelgaas@google.com>
> 
> e60b22c5b7e5 ("e1000e: fix accessing to suspended device") added
> ethtool_ops.begin() and .complete(), which used pm_runtime_get_sync() to
> resume suspended devices before any ethtool_ops callback and allow suspend
> after it completed.
> 
> 3ef672ab1862 ("e1000e: ethtool unnecessarily takes device out of RPM
> suspend") removed ethtool_ops.begin() and .complete() and instead did
> pm_runtime_get_sync() only in the individual ethtool_ops callbacks that
> access device registers.
> 
> Subsequently, f32a21376573 ("ethtool: runtime-resume netdev parent before
> ethtool ioctl ops") added pm_runtime_get_sync() in the dev_ethtool() path,
> so the device is resumed before *any* ethtool_ops callback, as it was
> before 3ef672ab1862.
> 
> Remove most runtime resumes from ethtool_ops, which are now redundant
> because the resume has already been done by dev_ethtool().  This is
> essentially a revert of 3ef672ab1862 ("e1000e: ethtool unnecessarily takes
> device out of RPM suspend").
> 
> There are a couple subtleties:
> 
>    - Prior to 3ef672ab1862, the device was resumed only for the duration of
>      a single ethtool callback.  3ef672ab1862 changed e1000_set_phys_id() so
>      the device was resumed for ETHTOOL_ID_ACTIVE and remained resumed until
>      a subsequent callback for ETHTOOL_ID_INACTIVE.  Preserve that part of
>      3ef672ab1862 so the device will not be runtime suspended while in the
>      ETHTOOL_ID_ACTIVE state.
> 
>    - 3ef672ab1862 added "if (!pm_runtime_suspended())" in before reading the
>      STATUS register in e1000_get_settings().  This was racy and is now
>      unnecessary because dev_ethtool() has resumed the device already, so
>      revert that.
> 
> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
> ---
>   drivers/net/ethernet/intel/e1000e/ethtool.c | 62 ++-------------------
>   1 file changed, 6 insertions(+), 56 deletions(-)

Tested-by: Naama Meir <naamax.meir@linux.intel.com>

[PATCH 2/3] igb: Remove redundant runtime resume for ethtool_ops

[Bjorn Helgaas]

From: Bjorn Helgaas <bhelgaas@google.com>

749ab2cd1270 ("igb: add basic runtime PM support") added
ethtool_ops.begin() and .complete(), which used pm_runtime_get_sync() to
resume suspended devices before any ethtool_ops callback and allow suspend
after it completed.

Subsequently, f32a21376573 ("ethtool: runtime-resume netdev parent before
ethtool ioctl ops") added pm_runtime_get_sync() in the dev_ethtool() path,
so the device is resumed before any ethtool_ops callback even if the driver
didn't supply a .begin() callback.

Remove the .begin() and .complete() callbacks, which are now redundant
because dev_ethtool() already resumes the device.

Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
---
 drivers/net/ethernet/intel/igb/igb_ethtool.c | 15 ---------------
 1 file changed, 15 deletions(-)

diff --git a/drivers/net/ethernet/intel/igb/igb_ethtool.c b/drivers/net/ethernet/intel/igb/igb_ethtool.c
index 99977a22b843..61d72250c0ed 100644
--- a/drivers/net/ethernet/intel/igb/igb_ethtool.c
+++ b/drivers/net/ethernet/intel/igb/igb_ethtool.c
@@ -3272,19 +3272,6 @@ static int igb_get_module_eeprom(struct net_device *netdev,
 	return 0;
 }
 
-static int igb_ethtool_begin(struct net_device *netdev)
-{
-	struct igb_adapter *adapter = netdev_priv(netdev);
-	pm_runtime_get_sync(&adapter->pdev->dev);
-	return 0;
-}
-
-static void igb_ethtool_complete(struct net_device *netdev)
-{
-	struct igb_adapter *adapter = netdev_priv(netdev);
-	pm_runtime_put(&adapter->pdev->dev);
-}
-
 static u32 igb_get_rxfh_indir_size(struct net_device *netdev)
 {
 	return IGB_RETA_SIZE;
@@ -3508,8 +3495,6 @@ static const struct ethtool_ops igb_ethtool_ops = {
 	.set_channels		= igb_set_channels,
 	.get_priv_flags		= igb_get_priv_flags,
 	.set_priv_flags		= igb_set_priv_flags,
-	.begin			= igb_ethtool_begin,
-	.complete		= igb_ethtool_complete,
 	.get_link_ksettings	= igb_get_link_ksettings,
 	.set_link_ksettings	= igb_set_link_ksettings,
 };
-- 
2.34.1

Re: [PATCH 2/3] igb: Remove redundant runtime resume for ethtool_ops

[Simon Horman]

On Mon, Mar 25, 2024 at 05:29:50PM -0500, Bjorn Helgaas wrote:
> From: Bjorn Helgaas <bhelgaas@google.com>
> 
> 749ab2cd1270 ("igb: add basic runtime PM support") added
> ethtool_ops.begin() and .complete(), which used pm_runtime_get_sync() to
> resume suspended devices before any ethtool_ops callback and allow suspend
> after it completed.
> 
> Subsequently, f32a21376573 ("ethtool: runtime-resume netdev parent before
> ethtool ioctl ops") added pm_runtime_get_sync() in the dev_ethtool() path,
> so the device is resumed before any ethtool_ops callback even if the driver
> didn't supply a .begin() callback.
> 
> Remove the .begin() and .complete() callbacks, which are now redundant
> because dev_ethtool() already resumes the device.
> 
> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>

Reviewed-by: Simon Horman <horms@kernel.org>

RE: [Intel-wired-lan] [PATCH 2/3] igb: Remove redundant runtime resume for ethtool_ops

[Mekala, SunithaX D]

> -----Original Message-----
> From: Intel-wired-lan <intel-wired-lan-bounces@osuosl.org> On Behalf Of Bjorn Helgaas
> Sent: Monday, March 25, 2024 3:30 PM
> To: Brandeburg, Jesse <jesse.brandeburg@intel.com>; Nguyen, Anthony L <anthony.l.nguyen@intel.com>; David S . Miller <davem@davemloft.net>; Eric Dumazet <edumazet@google.com>; Jakub Kicinski <kuba@kernel.org>; Paolo Abeni <pabeni@redhat.com>
> Cc: Neftin, Sasha <sasha.neftin@intel.com>; netdev@vger.kernel.org; Wysocki, Rafael J <rafael.j.wysocki@intel.com>; linux-kernel@vger.kernel.org; Bjorn Helgaas <bhelgaas@google.com>; intel-wired-lan@lists.osuosl.org; Zheng Yan <zheng.z.yan@intel.com>; Konstantin Khlebnikov <khlebnikov@openvz.org>; Heiner Kallweit <hkallweit1@gmail.com>
> Subject: [Intel-wired-lan] [PATCH 2/3] igb: Remove redundant runtime resume for ethtool_ops
>
> From: Bjorn Helgaas <bhelgaas@google.com>
>
> 749ab2cd1270 ("igb: add basic runtime PM support") added
> ethtool_ops.begin() and .complete(), which used pm_runtime_get_sync() to
> resume suspended devices before any ethtool_ops callback and allow suspend
> after it completed.
>
> Subsequently, f32a21376573 ("ethtool: runtime-resume netdev parent before
> ethtool ioctl ops") added pm_runtime_get_sync() in the dev_ethtool() path,
> so the device is resumed before any ethtool_ops callback even if the driver
> didn't supply a .begin() callback.
>
> Remove the .begin() and .complete() callbacks, which are now redundant
> because dev_ethtool() already resumes the device.
>
>Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
>---
> drivers/net/ethernet/intel/igb/igb_ethtool.c | 15 ---------------
> 1 file changed, 15 deletions(-)
>
Tested-by: Sunitha Mekala <sunithax.d.mekala@intel.com> (A Contingent worker at Intel)

[PATCH 3/3] igc: Remove redundant runtime resume for ethtool ops

[Bjorn Helgaas]

From: Bjorn Helgaas <bhelgaas@google.com>

8c5ad0dae93c ("igc: Add ethtool support") added ethtool_ops.begin() and
.complete(), which used pm_runtime_get_sync() to resume suspended devices
before any ethtool_ops callback and allow suspend after it completed.

Subsequently, f32a21376573 ("ethtool: runtime-resume netdev parent before
ethtool ioctl ops") added pm_runtime_get_sync() in the dev_ethtool() path,
so the device is resumed before any ethtool_ops callback even if the driver
didn't supply a .begin() callback.

Remove the .begin() and .complete() callbacks, which are now redundant
because dev_ethtool() already resumes the device.

Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
---
 drivers/net/ethernet/intel/igc/igc_ethtool.c | 17 -----------------
 1 file changed, 17 deletions(-)

diff --git a/drivers/net/ethernet/intel/igc/igc_ethtool.c b/drivers/net/ethernet/intel/igc/igc_ethtool.c
index 1a64f1ca6ca8..f2c4f1966bb0 100644
--- a/drivers/net/ethernet/intel/igc/igc_ethtool.c
+++ b/drivers/net/ethernet/intel/igc/igc_ethtool.c
@@ -1711,21 +1711,6 @@ static int igc_ethtool_set_eee(struct net_device *netdev,
 	return 0;
 }
 
-static int igc_ethtool_begin(struct net_device *netdev)
-{
-	struct igc_adapter *adapter = netdev_priv(netdev);
-
-	pm_runtime_get_sync(&adapter->pdev->dev);
-	return 0;
-}
-
-static void igc_ethtool_complete(struct net_device *netdev)
-{
-	struct igc_adapter *adapter = netdev_priv(netdev);
-
-	pm_runtime_put(&adapter->pdev->dev);
-}
-
 static int igc_ethtool_get_link_ksettings(struct net_device *netdev,
 					  struct ethtool_link_ksettings *cmd)
 {
@@ -2025,8 +2010,6 @@ static const struct ethtool_ops igc_ethtool_ops = {
 	.set_priv_flags		= igc_ethtool_set_priv_flags,
 	.get_eee		= igc_ethtool_get_eee,
 	.set_eee		= igc_ethtool_set_eee,
-	.begin			= igc_ethtool_begin,
-	.complete		= igc_ethtool_complete,
 	.get_link_ksettings	= igc_ethtool_get_link_ksettings,
 	.set_link_ksettings	= igc_ethtool_set_link_ksettings,
 	.self_test		= igc_ethtool_diag_test,
-- 
2.34.1

Re: [PATCH 3/3] igc: Remove redundant runtime resume for ethtool ops

[Simon Horman]

On Mon, Mar 25, 2024 at 05:29:51PM -0500, Bjorn Helgaas wrote:
> From: Bjorn Helgaas <bhelgaas@google.com>
> 
> 8c5ad0dae93c ("igc: Add ethtool support") added ethtool_ops.begin() and
> .complete(), which used pm_runtime_get_sync() to resume suspended devices
> before any ethtool_ops callback and allow suspend after it completed.
> 
> Subsequently, f32a21376573 ("ethtool: runtime-resume netdev parent before
> ethtool ioctl ops") added pm_runtime_get_sync() in the dev_ethtool() path,
> so the device is resumed before any ethtool_ops callback even if the driver
> didn't supply a .begin() callback.
> 
> Remove the .begin() and .complete() callbacks, which are now redundant
> because dev_ethtool() already resumes the device.
> 
> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>

Reviewed-by: Simon Horman <horms@kernel.org>

Re: [Intel-wired-lan] [PATCH 3/3] igc: Remove redundant runtime resume for ethtool ops

[naamax.meir]

On 3/26/2024 00:29, Bjorn Helgaas wrote:
> From: Bjorn Helgaas <bhelgaas@google.com>
> 
> 8c5ad0dae93c ("igc: Add ethtool support") added ethtool_ops.begin() and
> .complete(), which used pm_runtime_get_sync() to resume suspended devices
> before any ethtool_ops callback and allow suspend after it completed.
> 
> Subsequently, f32a21376573 ("ethtool: runtime-resume netdev parent before
> ethtool ioctl ops") added pm_runtime_get_sync() in the dev_ethtool() path,
> so the device is resumed before any ethtool_ops callback even if the driver
> didn't supply a .begin() callback.
> 
> Remove the .begin() and .complete() callbacks, which are now redundant
> because dev_ethtool() already resumes the device.
> 
> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
> ---
>   drivers/net/ethernet/intel/igc/igc_ethtool.c | 17 -----------------
>   1 file changed, 17 deletions(-)


Tested-by: Naama Meir <naamax.meir@linux.intel.com>