* [PATCH net-next v2 0/2] ethtool: provide the dim profile fine-tuning channel @ 2024-03-27 9:19 Heng Qi 2024-03-27 9:19 ` [PATCH net-next v2 1/2] ethtool: provide customized dim profile management Heng Qi 2024-03-27 9:19 ` [PATCH net-next v2 2/2] virtio-net: support dim profile fine-tuning Heng Qi 0 siblings, 2 replies; 14+ messages in thread From: Heng Qi @ 2024-03-27 9:19 UTC (permalink / raw) To: netdev, Jakub Kicinski, Eric Dumazet, Paolo Abeni, Vladimir Oltean, David S. Miller, Jason Wang, Michael S. Tsirkin, Xuan Zhuo The NetDIM library provides excellent acceleration for many modern network cards. However, the default profiles of DIM limits its maximum capabilities for different NICs, so providing a way reusing "ethtool -C" through which the NIC can be custom configured is necessary. Please review, thank you very much! Changelog ====== v1->v2: - Use ethtool tool instead of net-sysfs V1 link: https://lore.kernel.org/all/1710421773-61277-1-git-send-email-hengqi@linux.alibaba.com/#r Heng Qi (2): ethtool: provide customized dim profile management virtio-net: support dim profile fine-tuning Documentation/networking/ethtool-netlink.rst | 8 +++++ drivers/net/virtio_net.c | 54 ++++++++++++++++++++++++++-- include/linux/dim.h | 7 ++++ include/linux/ethtool.h | 16 ++++++++- include/uapi/linux/ethtool_netlink.h | 4 +++ lib/dim/net_dim.c | 6 ---- net/ethtool/coalesce.c | 51 ++++++++++++++++++++++++-- net/ethtool/netlink.h | 35 ++++++++++++++++++ 8 files changed, 170 insertions(+), 11 deletions(-) -- 1.8.3.1 ^ permalink raw reply [flat|nested] 14+ messages in thread
* [PATCH net-next v2 1/2] ethtool: provide customized dim profile management 2024-03-27 9:19 [PATCH net-next v2 0/2] ethtool: provide the dim profile fine-tuning channel Heng Qi @ 2024-03-27 9:19 ` Heng Qi 2024-03-27 9:19 ` [PATCH net-next v2 2/2] virtio-net: support dim profile fine-tuning Heng Qi 1 sibling, 0 replies; 14+ messages in thread From: Heng Qi @ 2024-03-27 9:19 UTC (permalink / raw) To: netdev, Jakub Kicinski, Eric Dumazet, Paolo Abeni, Vladimir Oltean, David S. Miller, Jason Wang, Michael S. Tsirkin, Xuan Zhuo The NetDIM library, currently leveraged by an array of NICs, delivers excellent acceleration benefits. Nevertheless, NICs vary significantly in their dim profile list prerequisites. Specifically, virtio-net backends may present diverse sw or hw device implementation, making a one-size-fits-all parameter list impractical. On Alibaba Cloud, the virtio DPU's performance under the default DIM profile falls short of expectations, partly due to a mismatch in parameter configuration. I also noticed that ice/idpf/ena and other NICs have customized profilelist or placed some restrictions on dim capabilities. Motivated by this, I tried adding new params for "ethtool -C" that provides a per-device control to modify and access a device's interrupt parameters. Usage ======== 1. Query the currently customized list of the device $ ethtool -c ethx ... rx-eqe-profs: {.usec = 1, .pkts = 256, .comps = 0,}, {.usec = 8, .pkts = 256, .comps = 0,}, {.usec = 64, .pkts = 256, .comps = 0,}, {.usec = 128, .pkts = 256, .comps = 0,}, rx-cqe-profs: n/a tx-eqe-profs: n/a tx-cqe-profs: n/a 2. Tune $ ethtool -C ethx rx-eqe-profs 1,1,0_2,2,0_3,3,0_4,4,0_5,5,0 $ ethtool -c ethx ... rx-eqe-profs: {.usec = 1, .pkts = 1, .comps = 0,}, {.usec = 2, .pkts = 2, .comps = 0,}, {.usec = 3, .pkts = 3, .comps = 0,}, {.usec = 4, .pkts = 4, .comps = 0,}, {.usec = 5, .pkts = 5, .comps = 0,} rx-cqe-profs: n/a tx-eqe-profs: n/a tx-cqe-profs: n/a 3. Hint If the device does not support some type of customized dim profiles, the corresponding "n/a" will display. Signed-off-by: Heng Qi <hengqi@linux.alibaba.com> --- Documentation/networking/ethtool-netlink.rst | 8 +++++ include/linux/dim.h | 7 ++++ include/linux/ethtool.h | 16 ++++++++- include/uapi/linux/ethtool_netlink.h | 4 +++ lib/dim/net_dim.c | 6 ---- net/ethtool/coalesce.c | 51 ++++++++++++++++++++++++++-- net/ethtool/netlink.h | 35 +++++++++++++++++++ 7 files changed, 118 insertions(+), 9 deletions(-) diff --git a/Documentation/networking/ethtool-netlink.rst b/Documentation/networking/ethtool-netlink.rst index d583d9a..eb5be7b3 100644 --- a/Documentation/networking/ethtool-netlink.rst +++ b/Documentation/networking/ethtool-netlink.rst @@ -1033,6 +1033,10 @@ Kernel response contents: ``ETHTOOL_A_COALESCE_TX_AGGR_MAX_BYTES`` u32 max aggr size, Tx ``ETHTOOL_A_COALESCE_TX_AGGR_MAX_FRAMES`` u32 max aggr packets, Tx ``ETHTOOL_A_COALESCE_TX_AGGR_TIME_USECS`` u32 time (us), aggr, Tx + ``ETHTOOL_A_COALESCE_RX_EQE_PROFILE`` string profile of DIM EQE, Rx + ``ETHTOOL_A_COALESCE_RX_CQE_PROFILE`` string profile of DIM CQE, Rx + ``ETHTOOL_A_COALESCE_TX_EQE_PROFILE`` string profile of DIM EQE, Tx + ``ETHTOOL_A_COALESCE_TX_CQE_PROFILE`` string profile of DIM CQE, Tx =========================================== ====== ======================= Attributes are only included in reply if their value is not zero or the @@ -1098,6 +1102,10 @@ Request contents: ``ETHTOOL_A_COALESCE_TX_AGGR_MAX_BYTES`` u32 max aggr size, Tx ``ETHTOOL_A_COALESCE_TX_AGGR_MAX_FRAMES`` u32 max aggr packets, Tx ``ETHTOOL_A_COALESCE_TX_AGGR_TIME_USECS`` u32 time (us), aggr, Tx + ``ETHTOOL_A_COALESCE_RX_EQE_PROFILE`` string profile of DIM EQE, Rx + ``ETHTOOL_A_COALESCE_RX_CQE_PROFILE`` string profile of DIM CQE, Rx + ``ETHTOOL_A_COALESCE_TX_EQE_PROFILE`` string profile of DIM EQE, Tx + ``ETHTOOL_A_COALESCE_TX_CQE_PROFILE`` string profile of DIM CQE, Tx =========================================== ====== ======================= Request is rejected if it attributes declared as unsupported by driver (i.e. diff --git a/include/linux/dim.h b/include/linux/dim.h index f343bc9..43398f5 100644 --- a/include/linux/dim.h +++ b/include/linux/dim.h @@ -10,6 +10,13 @@ #include <linux/types.h> #include <linux/workqueue.h> +/* Number of DIM profiles and period mode. */ +#define NET_DIM_PARAMS_NUM_PROFILES 5 +#define NET_DIM_DEFAULT_RX_CQ_PKTS_FROM_EQE 256 +#define NET_DIM_DEFAULT_TX_CQ_PKTS_FROM_EQE 128 +#define NET_DIM_DEF_PROFILE_CQE 1 +#define NET_DIM_DEF_PROFILE_EQE 1 + /* * Number of events between DIM iterations. * Causes a moderation of the algorithm run. diff --git a/include/linux/ethtool.h b/include/linux/ethtool.h index 9901e56..0fd81e8 100644 --- a/include/linux/ethtool.h +++ b/include/linux/ethtool.h @@ -18,6 +18,7 @@ #include <linux/if_ether.h> #include <linux/netlink.h> #include <uapi/linux/ethtool.h> +#include <linux/dim.h> struct compat_ethtool_rx_flow_spec { u32 flow_type; @@ -238,6 +239,10 @@ struct kernel_ethtool_coalesce { u32 tx_aggr_max_bytes; u32 tx_aggr_max_frames; u32 tx_aggr_time_usecs; + struct dim_cq_moder rx_eqe_profs[NET_DIM_PARAMS_NUM_PROFILES]; + struct dim_cq_moder rx_cqe_profs[NET_DIM_PARAMS_NUM_PROFILES]; + struct dim_cq_moder tx_eqe_profs[NET_DIM_PARAMS_NUM_PROFILES]; + struct dim_cq_moder tx_cqe_profs[NET_DIM_PARAMS_NUM_PROFILES]; }; /** @@ -284,7 +289,11 @@ bool ethtool_convert_link_mode_to_legacy_u32(u32 *legacy_u32, #define ETHTOOL_COALESCE_TX_AGGR_MAX_BYTES BIT(24) #define ETHTOOL_COALESCE_TX_AGGR_MAX_FRAMES BIT(25) #define ETHTOOL_COALESCE_TX_AGGR_TIME_USECS BIT(26) -#define ETHTOOL_COALESCE_ALL_PARAMS GENMASK(26, 0) +#define ETHTOOL_COALESCE_RX_EQE_PROFILE BIT(27) +#define ETHTOOL_COALESCE_RX_CQE_PROFILE BIT(28) +#define ETHTOOL_COALESCE_TX_EQE_PROFILE BIT(29) +#define ETHTOOL_COALESCE_TX_CQE_PROFILE BIT(30) +#define ETHTOOL_COALESCE_ALL_PARAMS GENMASK(30, 0) #define ETHTOOL_COALESCE_USECS \ (ETHTOOL_COALESCE_RX_USECS | ETHTOOL_COALESCE_TX_USECS) @@ -316,6 +325,11 @@ bool ethtool_convert_link_mode_to_legacy_u32(u32 *legacy_u32, (ETHTOOL_COALESCE_TX_AGGR_MAX_BYTES | \ ETHTOOL_COALESCE_TX_AGGR_MAX_FRAMES | \ ETHTOOL_COALESCE_TX_AGGR_TIME_USECS) +#define ETHTOOL_COALESCE_PROFILE \ + (ETHTOOL_COALESCE_RX_EQE_PROFILE | \ + ETHTOOL_COALESCE_RX_CQE_PROFILE | \ + ETHTOOL_COALESCE_TX_EQE_PROFILE | \ + ETHTOOL_COALESCE_TX_CQE_PROFILE) #define ETHTOOL_STAT_NOT_SET (~0ULL) diff --git a/include/uapi/linux/ethtool_netlink.h b/include/uapi/linux/ethtool_netlink.h index 3f89074..b7c0b81 100644 --- a/include/uapi/linux/ethtool_netlink.h +++ b/include/uapi/linux/ethtool_netlink.h @@ -416,6 +416,10 @@ enum { ETHTOOL_A_COALESCE_TX_AGGR_MAX_BYTES, /* u32 */ ETHTOOL_A_COALESCE_TX_AGGR_MAX_FRAMES, /* u32 */ ETHTOOL_A_COALESCE_TX_AGGR_TIME_USECS, /* u32 */ + ETHTOOL_A_COALESCE_RX_EQE_PROFILE, /* string */ + ETHTOOL_A_COALESCE_RX_CQE_PROFILE, /* string */ + ETHTOOL_A_COALESCE_TX_EQE_PROFILE, /* string */ + ETHTOOL_A_COALESCE_TX_CQE_PROFILE, /* string */ /* add new constants above here */ __ETHTOOL_A_COALESCE_CNT, diff --git a/lib/dim/net_dim.c b/lib/dim/net_dim.c index 4e32f7a..67d5beb 100644 --- a/lib/dim/net_dim.c +++ b/lib/dim/net_dim.c @@ -11,12 +11,6 @@ * There are different set of profiles for RX/TX CQs. * Each profile size must be of NET_DIM_PARAMS_NUM_PROFILES */ -#define NET_DIM_PARAMS_NUM_PROFILES 5 -#define NET_DIM_DEFAULT_RX_CQ_PKTS_FROM_EQE 256 -#define NET_DIM_DEFAULT_TX_CQ_PKTS_FROM_EQE 128 -#define NET_DIM_DEF_PROFILE_CQE 1 -#define NET_DIM_DEF_PROFILE_EQE 1 - #define NET_DIM_RX_EQE_PROFILES { \ {.usec = 1, .pkts = NET_DIM_DEFAULT_RX_CQ_PKTS_FROM_EQE,}, \ {.usec = 8, .pkts = NET_DIM_DEFAULT_RX_CQ_PKTS_FROM_EQE,}, \ diff --git a/net/ethtool/coalesce.c b/net/ethtool/coalesce.c index 83112c1..b5d5bc1 100644 --- a/net/ethtool/coalesce.c +++ b/net/ethtool/coalesce.c @@ -51,6 +51,10 @@ static u32 attr_to_mask(unsigned int attr_type) __CHECK_SUPPORTED_OFFSET(COALESCE_TX_USECS_HIGH); __CHECK_SUPPORTED_OFFSET(COALESCE_TX_MAX_FRAMES_HIGH); __CHECK_SUPPORTED_OFFSET(COALESCE_RATE_SAMPLE_INTERVAL); +__CHECK_SUPPORTED_OFFSET(COALESCE_RX_EQE_PROFILE); +__CHECK_SUPPORTED_OFFSET(COALESCE_RX_CQE_PROFILE); +__CHECK_SUPPORTED_OFFSET(COALESCE_TX_EQE_PROFILE); +__CHECK_SUPPORTED_OFFSET(COALESCE_TX_CQE_PROFILE); const struct nla_policy ethnl_coalesce_get_policy[] = { [ETHTOOL_A_COALESCE_HEADER] = @@ -108,7 +112,9 @@ static int coalesce_reply_size(const struct ethnl_req_info *req_base, nla_total_size(sizeof(u8)) + /* _USE_CQE_MODE_RX */ nla_total_size(sizeof(u32)) + /* _TX_AGGR_MAX_BYTES */ nla_total_size(sizeof(u32)) + /* _TX_AGGR_MAX_FRAMES */ - nla_total_size(sizeof(u32)); /* _TX_AGGR_TIME_USECS */ + nla_total_size(sizeof(u32)) + /* _TX_AGGR_TIME_USECS */ + nla_total_size(sizeof(struct dim_cq_moder) * + NET_DIM_PARAMS_NUM_PROFILES) * 4; /* _{R,T}X_{E,C}QE_PROFILE */ } static bool coalesce_put_u32(struct sk_buff *skb, u16 attr_type, u32 val, @@ -127,6 +133,27 @@ static bool coalesce_put_bool(struct sk_buff *skb, u16 attr_type, u32 val, return nla_put_u8(skb, attr_type, !!val); } +static bool coalesce_put_dim_profs(struct sk_buff *skb, u16 attr_type, + const struct dim_cq_moder *profs, + u32 supported_params) +{ + bool valid = false; + int i; + + for (i = 0; i < NET_DIM_PARAMS_NUM_PROFILES; i++) { + if (profs[i].usec || profs[i].pkts || profs[i].comps) { + valid = true; + break; + } + } + + if (!valid || !(supported_params & attr_to_mask(attr_type))) + return false; + + return nla_put(skb, attr_type, sizeof(struct dim_cq_moder) * + NET_DIM_PARAMS_NUM_PROFILES, profs); +} + static int coalesce_fill_reply(struct sk_buff *skb, const struct ethnl_req_info *req_base, const struct ethnl_reply_data *reply_base) @@ -189,7 +216,15 @@ static int coalesce_fill_reply(struct sk_buff *skb, coalesce_put_u32(skb, ETHTOOL_A_COALESCE_TX_AGGR_MAX_FRAMES, kcoal->tx_aggr_max_frames, supported) || coalesce_put_u32(skb, ETHTOOL_A_COALESCE_TX_AGGR_TIME_USECS, - kcoal->tx_aggr_time_usecs, supported)) + kcoal->tx_aggr_time_usecs, supported) || + coalesce_put_dim_profs(skb, ETHTOOL_A_COALESCE_RX_EQE_PROFILE, + kcoal->rx_eqe_profs, supported) || + coalesce_put_dim_profs(skb, ETHTOOL_A_COALESCE_RX_CQE_PROFILE, + kcoal->rx_cqe_profs, supported) || + coalesce_put_dim_profs(skb, ETHTOOL_A_COALESCE_TX_EQE_PROFILE, + kcoal->tx_eqe_profs, supported) || + coalesce_put_dim_profs(skb, ETHTOOL_A_COALESCE_TX_CQE_PROFILE, + kcoal->tx_cqe_profs, supported)) return -EMSGSIZE; return 0; @@ -227,6 +262,10 @@ static int coalesce_fill_reply(struct sk_buff *skb, [ETHTOOL_A_COALESCE_TX_AGGR_MAX_BYTES] = { .type = NLA_U32 }, [ETHTOOL_A_COALESCE_TX_AGGR_MAX_FRAMES] = { .type = NLA_U32 }, [ETHTOOL_A_COALESCE_TX_AGGR_TIME_USECS] = { .type = NLA_U32 }, + [ETHTOOL_A_COALESCE_RX_EQE_PROFILE] = { .type = NLA_NUL_STRING }, + [ETHTOOL_A_COALESCE_RX_CQE_PROFILE] = { .type = NLA_NUL_STRING }, + [ETHTOOL_A_COALESCE_TX_EQE_PROFILE] = { .type = NLA_NUL_STRING }, + [ETHTOOL_A_COALESCE_TX_CQE_PROFILE] = { .type = NLA_NUL_STRING }, }; static int @@ -316,6 +355,14 @@ static int coalesce_fill_reply(struct sk_buff *skb, tb[ETHTOOL_A_COALESCE_TX_AGGR_MAX_FRAMES], &mod); ethnl_update_u32(&kernel_coalesce.tx_aggr_time_usecs, tb[ETHTOOL_A_COALESCE_TX_AGGR_TIME_USECS], &mod); + ethnl_update_profs(kernel_coalesce.rx_eqe_profs, + tb[ETHTOOL_A_COALESCE_RX_EQE_PROFILE], &mod); + ethnl_update_profs(kernel_coalesce.rx_cqe_profs, + tb[ETHTOOL_A_COALESCE_RX_CQE_PROFILE], &mod); + ethnl_update_profs(kernel_coalesce.tx_eqe_profs, + tb[ETHTOOL_A_COALESCE_TX_EQE_PROFILE], &mod); + ethnl_update_profs(kernel_coalesce.tx_cqe_profs, + tb[ETHTOOL_A_COALESCE_TX_CQE_PROFILE], &mod); /* Update operation modes */ ethnl_update_bool32(&coalesce.use_adaptive_rx_coalesce, diff --git a/net/ethtool/netlink.h b/net/ethtool/netlink.h index 9a333a8..5a30879 100644 --- a/net/ethtool/netlink.h +++ b/net/ethtool/netlink.h @@ -85,6 +85,41 @@ static inline void ethnl_update_u32(u32 *dst, const struct nlattr *attr, *mod = true; } +static inline void ethnl_update_profs(struct dim_cq_moder *dst, + const struct nlattr *attr, + bool *mod) +{ + struct dim_cq_moder profs[NET_DIM_PARAMS_NUM_PROFILES]; + int ret, i, totlen = 0, retlen; + char *buf; + u16 len; + + if (!attr) + return; + + buf = nla_data(attr); + len = nla_len(attr); + for (i = 0; i < NET_DIM_PARAMS_NUM_PROFILES; i++) { + ret = sscanf(buf, "%hu,%hu,%hu_%n", &profs[i].usec, + &profs[i].pkts, &profs[i].comps, &retlen); + if (ret != 3) + return; + + totlen += retlen; + if (totlen > len) + return; + + if (dst[i].usec != profs[i].usec || + dst[i].pkts != profs[i].pkts || + dst[i].comps != profs[i].comps) + *mod = true; + + buf += retlen; + } + + memcpy(dst, profs, sizeof(profs)); +} + /** * ethnl_update_u8() - update u8 value from NLA_U8 attribute * @dst: value to update -- 1.8.3.1 ^ permalink raw reply related [flat|nested] 14+ messages in thread
* [PATCH net-next v2 2/2] virtio-net: support dim profile fine-tuning 2024-03-27 9:19 [PATCH net-next v2 0/2] ethtool: provide the dim profile fine-tuning channel Heng Qi 2024-03-27 9:19 ` [PATCH net-next v2 1/2] ethtool: provide customized dim profile management Heng Qi @ 2024-03-27 9:19 ` Heng Qi 2024-03-27 14:45 ` Alexander Lobakin 2024-03-28 7:27 ` Michael S. Tsirkin 1 sibling, 2 replies; 14+ messages in thread From: Heng Qi @ 2024-03-27 9:19 UTC (permalink / raw) To: netdev, Jakub Kicinski, Eric Dumazet, Paolo Abeni, Vladimir Oltean, David S. Miller, Jason Wang, Michael S. Tsirkin, Xuan Zhuo Virtio-net has different types of back-end device implementations. In order to effectively optimize the dim library's gains for different device implementations, let's use the new interface params to fine-tune the profile list. Signed-off-by: Heng Qi <hengqi@linux.alibaba.com> --- drivers/net/virtio_net.c | 54 ++++++++++++++++++++++++++++++++++++++++++++++-- 1 file changed, 52 insertions(+), 2 deletions(-) diff --git a/drivers/net/virtio_net.c b/drivers/net/virtio_net.c index e709d44..9b6c727 100644 --- a/drivers/net/virtio_net.c +++ b/drivers/net/virtio_net.c @@ -57,6 +57,16 @@ #define VIRTNET_DRIVER_VERSION "1.0.0" +/* This is copied from NET_DIM_RX_EQE_PROFILES in DIM library */ +#define VIRTNET_DIM_RX_PKTS 256 +static struct dim_cq_moder rx_eqe_conf[] = { + {.usec = 1, .pkts = VIRTNET_DIM_RX_PKTS,}, + {.usec = 8, .pkts = VIRTNET_DIM_RX_PKTS,}, + {.usec = 64, .pkts = VIRTNET_DIM_RX_PKTS,}, + {.usec = 128, .pkts = VIRTNET_DIM_RX_PKTS,}, + {.usec = 256, .pkts = VIRTNET_DIM_RX_PKTS,} +}; + static const unsigned long guest_offloads[] = { VIRTIO_NET_F_GUEST_TSO4, VIRTIO_NET_F_GUEST_TSO6, @@ -3584,7 +3594,10 @@ static void virtnet_rx_dim_work(struct work_struct *work) if (!rq->dim_enabled) continue; - update_moder = net_dim_get_rx_moderation(dim->mode, dim->profile_ix); + if (dim->profile_ix >= ARRAY_SIZE(rx_eqe_conf)) + dim->profile_ix = ARRAY_SIZE(rx_eqe_conf) - 1; + + update_moder = rx_eqe_conf[dim->profile_ix]; if (update_moder.usec != rq->intr_coal.max_usecs || update_moder.pkts != rq->intr_coal.max_packets) { err = virtnet_send_rx_ctrl_coal_vq_cmd(vi, qnum, @@ -3627,6 +3640,34 @@ static int virtnet_should_update_vq_weight(int dev_flags, int weight, return 0; } +static int virtnet_update_profile(struct virtnet_info *vi, + struct kernel_ethtool_coalesce *kc) +{ + int i; + + if (virtio_has_feature(vi->vdev, VIRTIO_NET_F_VQ_NOTF_COAL)) { + for (i = 0; i < NET_DIM_PARAMS_NUM_PROFILES; i++) + if (kc->rx_eqe_profs[i].comps) + return -EINVAL; + } else { + for (i = 0; i < NET_DIM_PARAMS_NUM_PROFILES; i++) { + if (kc->rx_eqe_profs[i].usec != rx_eqe_conf[i].usec || + kc->rx_eqe_profs[i].pkts != rx_eqe_conf[i].pkts || + kc->rx_eqe_profs[i].comps) + return -EINVAL; + } + + return 0; + } + + for (i = 0; i < NET_DIM_PARAMS_NUM_PROFILES; i++) { + rx_eqe_conf[i].usec = kc->rx_eqe_profs[i].usec; + rx_eqe_conf[i].pkts = kc->rx_eqe_profs[i].pkts; + } + + return 0; +} + static int virtnet_set_coalesce(struct net_device *dev, struct ethtool_coalesce *ec, struct kernel_ethtool_coalesce *kernel_coal, @@ -3653,6 +3694,10 @@ static int virtnet_set_coalesce(struct net_device *dev, } } + ret = virtnet_update_profile(vi, kernel_coal); + if (ret) + return ret; + if (virtio_has_feature(vi->vdev, VIRTIO_NET_F_NOTF_COAL)) ret = virtnet_send_notf_coal_cmds(vi, ec); else @@ -3689,6 +3734,10 @@ static int virtnet_get_coalesce(struct net_device *dev, ec->tx_max_coalesced_frames = 1; } + if (virtio_has_feature(vi->vdev, VIRTIO_NET_F_VQ_NOTF_COAL)) + memcpy(kernel_coal->rx_eqe_profs, rx_eqe_conf, + sizeof(rx_eqe_conf)); + return 0; } @@ -3868,7 +3917,8 @@ static int virtnet_set_rxnfc(struct net_device *dev, struct ethtool_rxnfc *info) static const struct ethtool_ops virtnet_ethtool_ops = { .supported_coalesce_params = ETHTOOL_COALESCE_MAX_FRAMES | - ETHTOOL_COALESCE_USECS | ETHTOOL_COALESCE_USE_ADAPTIVE_RX, + ETHTOOL_COALESCE_USECS | ETHTOOL_COALESCE_USE_ADAPTIVE_RX | + ETHTOOL_COALESCE_RX_EQE_PROFILE, .get_drvinfo = virtnet_get_drvinfo, .get_link = ethtool_op_get_link, .get_ringparam = virtnet_get_ringparam, -- 1.8.3.1 ^ permalink raw reply related [flat|nested] 14+ messages in thread
* Re: [PATCH net-next v2 2/2] virtio-net: support dim profile fine-tuning 2024-03-27 9:19 ` [PATCH net-next v2 2/2] virtio-net: support dim profile fine-tuning Heng Qi @ 2024-03-27 14:45 ` Alexander Lobakin 2024-03-28 0:32 ` Jakub Kicinski ` (2 more replies) 2024-03-28 7:27 ` Michael S. Tsirkin 1 sibling, 3 replies; 14+ messages in thread From: Alexander Lobakin @ 2024-03-27 14:45 UTC (permalink / raw) To: Heng Qi Cc: netdev, Jakub Kicinski, Eric Dumazet, Paolo Abeni, Vladimir Oltean, David S. Miller, Jason Wang, Michael S. Tsirkin, Xuan Zhuo From: Heng Qi <hengqi@linux.alibaba.com> Date: Wed, 27 Mar 2024 17:19:06 +0800 > Virtio-net has different types of back-end device > implementations. In order to effectively optimize > the dim library's gains for different device > implementations, let's use the new interface params > to fine-tune the profile list. Nice idea, but > > Signed-off-by: Heng Qi <hengqi@linux.alibaba.com> > --- > drivers/net/virtio_net.c | 54 ++++++++++++++++++++++++++++++++++++++++++++++-- > 1 file changed, 52 insertions(+), 2 deletions(-) > > diff --git a/drivers/net/virtio_net.c b/drivers/net/virtio_net.c > index e709d44..9b6c727 100644 > --- a/drivers/net/virtio_net.c > +++ b/drivers/net/virtio_net.c > @@ -57,6 +57,16 @@ > > #define VIRTNET_DRIVER_VERSION "1.0.0" > > +/* This is copied from NET_DIM_RX_EQE_PROFILES in DIM library */ > +#define VIRTNET_DIM_RX_PKTS 256 > +static struct dim_cq_moder rx_eqe_conf[] = { > + {.usec = 1, .pkts = VIRTNET_DIM_RX_PKTS,}, > + {.usec = 8, .pkts = VIRTNET_DIM_RX_PKTS,}, > + {.usec = 64, .pkts = VIRTNET_DIM_RX_PKTS,}, > + {.usec = 128, .pkts = VIRTNET_DIM_RX_PKTS,}, > + {.usec = 256, .pkts = VIRTNET_DIM_RX_PKTS,} > +}; This is wrong. This way you will have one global table for ALL the virtio devices in the system, while Ethtool performs configuration on a per-netdevice basis. What you need is to have 1 dim_cq_moder per each virtio netdevice, embedded somewhere into its netdev_priv(). Then virtio_dim_{rx,tx}_work() will take profiles from there, not the global struct. The global struct can stay here as const to initialize default per-netdevice params. > + > static const unsigned long guest_offloads[] = { > VIRTIO_NET_F_GUEST_TSO4, > VIRTIO_NET_F_GUEST_TSO6, Thanks, Olek ^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: [PATCH net-next v2 2/2] virtio-net: support dim profile fine-tuning 2024-03-27 14:45 ` Alexander Lobakin @ 2024-03-28 0:32 ` Jakub Kicinski 2024-03-28 2:12 ` Xuan Zhuo 2024-03-28 2:26 ` Heng Qi 2024-03-28 2:02 ` Heng Qi 2024-03-28 7:27 ` Michael S. Tsirkin 2 siblings, 2 replies; 14+ messages in thread From: Jakub Kicinski @ 2024-03-28 0:32 UTC (permalink / raw) To: Alexander Lobakin Cc: Heng Qi, netdev, Eric Dumazet, Paolo Abeni, Vladimir Oltean, David S. Miller, Jason Wang, Michael S. Tsirkin, Xuan Zhuo, vadim.fedorenko On Wed, 27 Mar 2024 15:45:50 +0100 Alexander Lobakin wrote: > > +/* This is copied from NET_DIM_RX_EQE_PROFILES in DIM library */ > > +#define VIRTNET_DIM_RX_PKTS 256 > > +static struct dim_cq_moder rx_eqe_conf[] = { > > + {.usec = 1, .pkts = VIRTNET_DIM_RX_PKTS,}, > > + {.usec = 8, .pkts = VIRTNET_DIM_RX_PKTS,}, > > + {.usec = 64, .pkts = VIRTNET_DIM_RX_PKTS,}, > > + {.usec = 128, .pkts = VIRTNET_DIM_RX_PKTS,}, > > + {.usec = 256, .pkts = VIRTNET_DIM_RX_PKTS,} > > +}; > > This is wrong. > This way you will have one global table for ALL the virtio devices in > the system, while Ethtool performs configuration on a per-netdevice basis. > What you need is to have 1 dim_cq_moder per each virtio netdevice, > embedded somewhere into its netdev_priv(). Then > virtio_dim_{rx,tx}_work() will take profiles from there, not the global > struct. The global struct can stay here as const to initialize default > per-netdevice params. I've been wondering lately if adaptive IRQ moderation isn't exactly the kind of heuristic we would be best off deferring to BPF. I have done 0 experiments -- are the thresholds enough or do more interesting algos come to mind for anyone? ^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: [PATCH net-next v2 2/2] virtio-net: support dim profile fine-tuning 2024-03-28 0:32 ` Jakub Kicinski @ 2024-03-28 2:12 ` Xuan Zhuo 2024-03-28 16:48 ` Jakub Kicinski 2024-03-28 2:26 ` Heng Qi 1 sibling, 1 reply; 14+ messages in thread From: Xuan Zhuo @ 2024-03-28 2:12 UTC (permalink / raw) To: Jakub Kicinski Cc: Heng Qi, netdev, Eric Dumazet, Paolo Abeni, Vladimir Oltean, David S. Miller, Jason Wang, Michael S. Tsirkin, vadim.fedorenko, Alexander Lobakin On Wed, 27 Mar 2024 17:32:58 -0700, Jakub Kicinski <kuba@kernel.org> wrote: > On Wed, 27 Mar 2024 15:45:50 +0100 Alexander Lobakin wrote: > > > +/* This is copied from NET_DIM_RX_EQE_PROFILES in DIM library */ > > > +#define VIRTNET_DIM_RX_PKTS 256 > > > +static struct dim_cq_moder rx_eqe_conf[] = { > > > + {.usec = 1, .pkts = VIRTNET_DIM_RX_PKTS,}, > > > + {.usec = 8, .pkts = VIRTNET_DIM_RX_PKTS,}, > > > + {.usec = 64, .pkts = VIRTNET_DIM_RX_PKTS,}, > > > + {.usec = 128, .pkts = VIRTNET_DIM_RX_PKTS,}, > > > + {.usec = 256, .pkts = VIRTNET_DIM_RX_PKTS,} > > > +}; > > > > This is wrong. > > This way you will have one global table for ALL the virtio devices in > > the system, while Ethtool performs configuration on a per-netdevice basis. > > What you need is to have 1 dim_cq_moder per each virtio netdevice, > > embedded somewhere into its netdev_priv(). Then > > virtio_dim_{rx,tx}_work() will take profiles from there, not the global > > struct. The global struct can stay here as const to initialize default > > per-netdevice params. > > I've been wondering lately if adaptive IRQ moderation isn't exactly > the kind of heuristic we would be best off deferring to BPF. > I have done 0 experiments -- are the thresholds enough > or do more interesting algos come to mind for anyone? Yes, we are working on this as well. For netdim, I think profiles are an aspect. In many cases, this can solve many problems. It is a good idea to introduce bpf, but what bpf should do is some logical situations that are not universal. In our practice, modifying profiles can solve most situations. We also have a small number of scenarios that cannot be handled, and we hope to use ebpf to solve them. Thanks. ^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: [PATCH net-next v2 2/2] virtio-net: support dim profile fine-tuning 2024-03-28 2:12 ` Xuan Zhuo @ 2024-03-28 16:48 ` Jakub Kicinski 2024-03-29 8:56 ` Heng Qi 0 siblings, 1 reply; 14+ messages in thread From: Jakub Kicinski @ 2024-03-28 16:48 UTC (permalink / raw) To: Xuan Zhuo Cc: Heng Qi, netdev, Eric Dumazet, Paolo Abeni, Vladimir Oltean, David S. Miller, Jason Wang, Michael S. Tsirkin, vadim.fedorenko, Alexander Lobakin On Thu, 28 Mar 2024 10:12:10 +0800 Xuan Zhuo wrote: > For netdim, I think profiles are an aspect. In many cases, this can solve many > problems. Okay, but then you should try harder to hide all the config in the core. The driver should be blissfully unaware that the user is changing the settings. It should just continue calling net_dim_get_*moderation(). You can create proper dim_init(), dim_destroy() functions for drivers to call, instead of doing INIT_WORK(&bla->dim.work, my_driver_do_dim_work); directly. In dim_init() you can hook the dim structure to net_device and then ethtool code can operation on it without driver involvement. About the uAPI - please make sure you add the new stuff to Documentation/netlink/specs/ethtool.yaml see: https://docs.kernel.org/next/userspace-api/netlink/specs.html And break up the attributes, please, no raw C structs of this nature: + return nla_put(skb, attr_type, sizeof(struct dim_cq_moder) * + NET_DIM_PARAMS_NUM_PROFILES, profs); They are hard to extend. ^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: [PATCH net-next v2 2/2] virtio-net: support dim profile fine-tuning 2024-03-28 16:48 ` Jakub Kicinski @ 2024-03-29 8:56 ` Heng Qi 2024-03-29 15:18 ` Jakub Kicinski 0 siblings, 1 reply; 14+ messages in thread From: Heng Qi @ 2024-03-29 8:56 UTC (permalink / raw) To: Jakub Kicinski Cc: netdev, Eric Dumazet, Paolo Abeni, Vladimir Oltean, David S. Miller, Jason Wang, Michael S. Tsirkin, vadim.fedorenko, Alexander Lobakin, Xuan Zhuo 在 2024/3/29 上午12:48, Jakub Kicinski 写道: > On Thu, 28 Mar 2024 10:12:10 +0800 Xuan Zhuo wrote: >> For netdim, I think profiles are an aspect. In many cases, this can solve many >> problems. > Okay, but then you should try harder to hide all the config in the core. > The driver should be blissfully unaware that the user is changing > the settings. It should just continue calling net_dim_get_*moderation(). > > You can create proper dim_init(), dim_destroy() functions for drivers > to call, instead of doing > > INIT_WORK(&bla->dim.work, my_driver_do_dim_work); > > directly. In dim_init() you can hook the dim structure to net_device > and then ethtool code can operation on it without driver involvement. Ok. Will try this. > > About the uAPI - please make sure you add the new stuff to > Documentation/netlink/specs/ethtool.yaml > see: https://docs.kernel.org/next/userspace-api/netlink/specs.html > > And break up the attributes, please, no raw C structs of this nature: > > + return nla_put(skb, attr_type, sizeof(struct dim_cq_moder) * > + NET_DIM_PARAMS_NUM_PROFILES, profs); > > They are hard to extend. Sorry, I don't seem to get your point, why does this make extending hard? Are you referring to specifying ETHTOOL_A_COALESCE_RX_EQE_PROFILE as a nested array, i.e. having each element explicitly have an attr name? or passing the u16 pointer and length as arguments? Thanks. ^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: [PATCH net-next v2 2/2] virtio-net: support dim profile fine-tuning 2024-03-29 8:56 ` Heng Qi @ 2024-03-29 15:18 ` Jakub Kicinski 0 siblings, 0 replies; 14+ messages in thread From: Jakub Kicinski @ 2024-03-29 15:18 UTC (permalink / raw) To: Heng Qi Cc: netdev, Eric Dumazet, Paolo Abeni, Vladimir Oltean, David S. Miller, Jason Wang, Michael S. Tsirkin, vadim.fedorenko, Alexander Lobakin, Xuan Zhuo On Fri, 29 Mar 2024 16:56:12 +0800 Heng Qi wrote: > > About the uAPI - please make sure you add the new stuff to > > Documentation/netlink/specs/ethtool.yaml > > see: https://docs.kernel.org/next/userspace-api/netlink/specs.html > > > > And break up the attributes, please, no raw C structs of this nature: > > > > + return nla_put(skb, attr_type, sizeof(struct dim_cq_moder) * > > + NET_DIM_PARAMS_NUM_PROFILES, profs); > > > > They are hard to extend. > > Sorry, I don't seem to get your point, why does this make extending hard? It's not possible to make some fields optional later on. It's also possible that user space will make assumptions about the size of this struct so we won't be able to add fields. So it's preferred to render the C struct members as individual netlink attributes. Look around ethtool netlink, you'll see there are no structs dumped. > Are you referring to specifying ETHTOOL_A_COALESCE_RX_EQE_PROFILE > as a nested array, i.e. having each element explicitly have an attr > name? or passing the u16 pointer and length as arguments? ^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: [PATCH net-next v2 2/2] virtio-net: support dim profile fine-tuning 2024-03-28 0:32 ` Jakub Kicinski 2024-03-28 2:12 ` Xuan Zhuo @ 2024-03-28 2:26 ` Heng Qi 1 sibling, 0 replies; 14+ messages in thread From: Heng Qi @ 2024-03-28 2:26 UTC (permalink / raw) To: Jakub Kicinski, Alexander Lobakin Cc: netdev, Eric Dumazet, Paolo Abeni, Vladimir Oltean, David S. Miller, Jason Wang, Michael S. Tsirkin, Xuan Zhuo, vadim.fedorenko, Alexei Starovoitov, Daniel Borkmann, Andrii Nakryiko 在 2024/3/28 上午8:32, Jakub Kicinski 写道: > On Wed, 27 Mar 2024 15:45:50 +0100 Alexander Lobakin wrote: >>> +/* This is copied from NET_DIM_RX_EQE_PROFILES in DIM library */ >>> +#define VIRTNET_DIM_RX_PKTS 256 >>> +static struct dim_cq_moder rx_eqe_conf[] = { >>> + {.usec = 1, .pkts = VIRTNET_DIM_RX_PKTS,}, >>> + {.usec = 8, .pkts = VIRTNET_DIM_RX_PKTS,}, >>> + {.usec = 64, .pkts = VIRTNET_DIM_RX_PKTS,}, >>> + {.usec = 128, .pkts = VIRTNET_DIM_RX_PKTS,}, >>> + {.usec = 256, .pkts = VIRTNET_DIM_RX_PKTS,} >>> +}; >> This is wrong. >> This way you will have one global table for ALL the virtio devices in >> the system, while Ethtool performs configuration on a per-netdevice basis. >> What you need is to have 1 dim_cq_moder per each virtio netdevice, >> embedded somewhere into its netdev_priv(). Then >> virtio_dim_{rx,tx}_work() will take profiles from there, not the global >> struct. The global struct can stay here as const to initialize default >> per-netdevice params. > I've been wondering lately if adaptive IRQ moderation isn't exactly > the kind of heuristic we would be best off deferring to BPF. > I have done 0 experiments -- are the thresholds enough > or do more interesting algos come to mind for anyone? Hi Jakub. I totally agree with your idea. In order to get the best practices for virtio DIM on our DPUs, I actually spent a lot of energy on tuning, similar to the current custom profile list and virtio ctrlq asynchronousization. There are some other tuning methods that may not be applicable to other manufacturers, so they are cannot be released for the time being. But anyway, adding a dim_bpf interface similar to native XDP (located at the beginning of net_dim()) I think would be good, if you and BPF maintainers (Cc'd) are willing for a new bpf type to be introduced. dim_bpf allows devices that want to implement best practices for adaptive IRQ moderation to implement custom logic. Also, I think the existing patches are still necessary, and this provides the simplest and most direct way to tune. Thanks! ^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: [PATCH net-next v2 2/2] virtio-net: support dim profile fine-tuning 2024-03-27 14:45 ` Alexander Lobakin 2024-03-28 0:32 ` Jakub Kicinski @ 2024-03-28 2:02 ` Heng Qi 2024-03-28 7:27 ` Michael S. Tsirkin 2 siblings, 0 replies; 14+ messages in thread From: Heng Qi @ 2024-03-28 2:02 UTC (permalink / raw) To: Alexander Lobakin Cc: netdev, Jakub Kicinski, Eric Dumazet, Paolo Abeni, Vladimir Oltean, David S. Miller, Jason Wang, Michael S. Tsirkin, Xuan Zhuo 在 2024/3/27 下午10:45, Alexander Lobakin 写道: > From: Heng Qi <hengqi@linux.alibaba.com> > Date: Wed, 27 Mar 2024 17:19:06 +0800 > >> Virtio-net has different types of back-end device >> implementations. In order to effectively optimize >> the dim library's gains for different device >> implementations, let's use the new interface params >> to fine-tune the profile list. > Nice idea, but > >> Signed-off-by: Heng Qi <hengqi@linux.alibaba.com> >> --- >> drivers/net/virtio_net.c | 54 ++++++++++++++++++++++++++++++++++++++++++++++-- >> 1 file changed, 52 insertions(+), 2 deletions(-) >> >> diff --git a/drivers/net/virtio_net.c b/drivers/net/virtio_net.c >> index e709d44..9b6c727 100644 >> --- a/drivers/net/virtio_net.c >> +++ b/drivers/net/virtio_net.c >> @@ -57,6 +57,16 @@ >> >> #define VIRTNET_DRIVER_VERSION "1.0.0" >> >> +/* This is copied from NET_DIM_RX_EQE_PROFILES in DIM library */ >> +#define VIRTNET_DIM_RX_PKTS 256 >> +static struct dim_cq_moder rx_eqe_conf[] = { >> + {.usec = 1, .pkts = VIRTNET_DIM_RX_PKTS,}, >> + {.usec = 8, .pkts = VIRTNET_DIM_RX_PKTS,}, >> + {.usec = 64, .pkts = VIRTNET_DIM_RX_PKTS,}, >> + {.usec = 128, .pkts = VIRTNET_DIM_RX_PKTS,}, >> + {.usec = 256, .pkts = VIRTNET_DIM_RX_PKTS,} >> +}; > This is wrong. > This way you will have one global table for ALL the virtio devices in > the system, while Ethtool performs configuration on a per-netdevice basis. > What you need is to have 1 dim_cq_moder per each virtio netdevice, > embedded somewhere into its netdev_priv(). Then > virtio_dim_{rx,tx}_work() will take profiles from there, not the global > struct. The global struct can stay here as const to initialize default > per-netdevice params. You are right. Good catch! Thanks, Heng >> + >> static const unsigned long guest_offloads[] = { >> VIRTIO_NET_F_GUEST_TSO4, >> VIRTIO_NET_F_GUEST_TSO6, > Thanks, > Olek ^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: [PATCH net-next v2 2/2] virtio-net: support dim profile fine-tuning 2024-03-27 14:45 ` Alexander Lobakin 2024-03-28 0:32 ` Jakub Kicinski 2024-03-28 2:02 ` Heng Qi @ 2024-03-28 7:27 ` Michael S. Tsirkin 2 siblings, 0 replies; 14+ messages in thread From: Michael S. Tsirkin @ 2024-03-28 7:27 UTC (permalink / raw) To: Alexander Lobakin Cc: Heng Qi, netdev, Jakub Kicinski, Eric Dumazet, Paolo Abeni, Vladimir Oltean, David S. Miller, Jason Wang, Xuan Zhuo On Wed, Mar 27, 2024 at 03:45:50PM +0100, Alexander Lobakin wrote: > From: Heng Qi <hengqi@linux.alibaba.com> > Date: Wed, 27 Mar 2024 17:19:06 +0800 > > > Virtio-net has different types of back-end device > > implementations. In order to effectively optimize > > the dim library's gains for different device > > implementations, let's use the new interface params > > to fine-tune the profile list. > > Nice idea, but > > > > > Signed-off-by: Heng Qi <hengqi@linux.alibaba.com> > > --- > > drivers/net/virtio_net.c | 54 ++++++++++++++++++++++++++++++++++++++++++++++-- > > 1 file changed, 52 insertions(+), 2 deletions(-) > > > > diff --git a/drivers/net/virtio_net.c b/drivers/net/virtio_net.c > > index e709d44..9b6c727 100644 > > --- a/drivers/net/virtio_net.c > > +++ b/drivers/net/virtio_net.c > > @@ -57,6 +57,16 @@ > > > > #define VIRTNET_DRIVER_VERSION "1.0.0" > > > > +/* This is copied from NET_DIM_RX_EQE_PROFILES in DIM library */ > > +#define VIRTNET_DIM_RX_PKTS 256 > > +static struct dim_cq_moder rx_eqe_conf[] = { > > + {.usec = 1, .pkts = VIRTNET_DIM_RX_PKTS,}, > > + {.usec = 8, .pkts = VIRTNET_DIM_RX_PKTS,}, > > + {.usec = 64, .pkts = VIRTNET_DIM_RX_PKTS,}, > > + {.usec = 128, .pkts = VIRTNET_DIM_RX_PKTS,}, > > + {.usec = 256, .pkts = VIRTNET_DIM_RX_PKTS,} > > +}; > > This is wrong. Yes I'd expect anything global to be const. > This way you will have one global table for ALL the virtio devices in > the system, while Ethtool performs configuration on a per-netdevice basis. > What you need is to have 1 dim_cq_moder per each virtio netdevice, > embedded somewhere into its netdev_priv(). Then > virtio_dim_{rx,tx}_work() will take profiles from there, not the global > struct. The global struct can stay here as const to initialize default > per-netdevice params. > > > + > > static const unsigned long guest_offloads[] = { > > VIRTIO_NET_F_GUEST_TSO4, > > VIRTIO_NET_F_GUEST_TSO6, > > Thanks, > Olek ^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: [PATCH net-next v2 2/2] virtio-net: support dim profile fine-tuning 2024-03-27 9:19 ` [PATCH net-next v2 2/2] virtio-net: support dim profile fine-tuning Heng Qi 2024-03-27 14:45 ` Alexander Lobakin @ 2024-03-28 7:27 ` Michael S. Tsirkin 2024-03-28 7:51 ` Heng Qi 1 sibling, 1 reply; 14+ messages in thread From: Michael S. Tsirkin @ 2024-03-28 7:27 UTC (permalink / raw) To: Heng Qi Cc: netdev, Jakub Kicinski, Eric Dumazet, Paolo Abeni, Vladimir Oltean, David S. Miller, Jason Wang, Xuan Zhuo On Wed, Mar 27, 2024 at 05:19:06PM +0800, Heng Qi wrote: > Virtio-net has different types of back-end device > implementations. In order to effectively optimize > the dim library's gains for different device > implementations, let's use the new interface params > to fine-tune the profile list. > > Signed-off-by: Heng Qi <hengqi@linux.alibaba.com> > --- > drivers/net/virtio_net.c | 54 ++++++++++++++++++++++++++++++++++++++++++++++-- > 1 file changed, 52 insertions(+), 2 deletions(-) > > diff --git a/drivers/net/virtio_net.c b/drivers/net/virtio_net.c > index e709d44..9b6c727 100644 > --- a/drivers/net/virtio_net.c > +++ b/drivers/net/virtio_net.c > @@ -57,6 +57,16 @@ > > #define VIRTNET_DRIVER_VERSION "1.0.0" > > +/* This is copied from NET_DIM_RX_EQE_PROFILES in DIM library */ So maybe move it to a header and reuse? > +#define VIRTNET_DIM_RX_PKTS 256 > +static struct dim_cq_moder rx_eqe_conf[] = { > + {.usec = 1, .pkts = VIRTNET_DIM_RX_PKTS,}, > + {.usec = 8, .pkts = VIRTNET_DIM_RX_PKTS,}, > + {.usec = 64, .pkts = VIRTNET_DIM_RX_PKTS,}, > + {.usec = 128, .pkts = VIRTNET_DIM_RX_PKTS,}, > + {.usec = 256, .pkts = VIRTNET_DIM_RX_PKTS,} > +}; > + > static const unsigned long guest_offloads[] = { > VIRTIO_NET_F_GUEST_TSO4, > VIRTIO_NET_F_GUEST_TSO6, > @@ -3584,7 +3594,10 @@ static void virtnet_rx_dim_work(struct work_struct *work) > if (!rq->dim_enabled) > continue; > > - update_moder = net_dim_get_rx_moderation(dim->mode, dim->profile_ix); > + if (dim->profile_ix >= ARRAY_SIZE(rx_eqe_conf)) > + dim->profile_ix = ARRAY_SIZE(rx_eqe_conf) - 1; > + > + update_moder = rx_eqe_conf[dim->profile_ix]; > if (update_moder.usec != rq->intr_coal.max_usecs || > update_moder.pkts != rq->intr_coal.max_packets) { > err = virtnet_send_rx_ctrl_coal_vq_cmd(vi, qnum, > @@ -3627,6 +3640,34 @@ static int virtnet_should_update_vq_weight(int dev_flags, int weight, > return 0; > } > > +static int virtnet_update_profile(struct virtnet_info *vi, > + struct kernel_ethtool_coalesce *kc) > +{ > + int i; > + > + if (virtio_has_feature(vi->vdev, VIRTIO_NET_F_VQ_NOTF_COAL)) { > + for (i = 0; i < NET_DIM_PARAMS_NUM_PROFILES; i++) > + if (kc->rx_eqe_profs[i].comps) > + return -EINVAL; > + } else { > + for (i = 0; i < NET_DIM_PARAMS_NUM_PROFILES; i++) { > + if (kc->rx_eqe_profs[i].usec != rx_eqe_conf[i].usec || > + kc->rx_eqe_profs[i].pkts != rx_eqe_conf[i].pkts || > + kc->rx_eqe_profs[i].comps) > + return -EINVAL; > + } > + > + return 0; > + } > + > + for (i = 0; i < NET_DIM_PARAMS_NUM_PROFILES; i++) { > + rx_eqe_conf[i].usec = kc->rx_eqe_profs[i].usec; > + rx_eqe_conf[i].pkts = kc->rx_eqe_profs[i].pkts; > + } > + > + return 0; > +} > + > static int virtnet_set_coalesce(struct net_device *dev, > struct ethtool_coalesce *ec, > struct kernel_ethtool_coalesce *kernel_coal, > @@ -3653,6 +3694,10 @@ static int virtnet_set_coalesce(struct net_device *dev, > } > } > > + ret = virtnet_update_profile(vi, kernel_coal); > + if (ret) > + return ret; > + > if (virtio_has_feature(vi->vdev, VIRTIO_NET_F_NOTF_COAL)) > ret = virtnet_send_notf_coal_cmds(vi, ec); > else > @@ -3689,6 +3734,10 @@ static int virtnet_get_coalesce(struct net_device *dev, > ec->tx_max_coalesced_frames = 1; > } > > + if (virtio_has_feature(vi->vdev, VIRTIO_NET_F_VQ_NOTF_COAL)) > + memcpy(kernel_coal->rx_eqe_profs, rx_eqe_conf, > + sizeof(rx_eqe_conf)); > + > return 0; > } > > @@ -3868,7 +3917,8 @@ static int virtnet_set_rxnfc(struct net_device *dev, struct ethtool_rxnfc *info) > > static const struct ethtool_ops virtnet_ethtool_ops = { > .supported_coalesce_params = ETHTOOL_COALESCE_MAX_FRAMES | > - ETHTOOL_COALESCE_USECS | ETHTOOL_COALESCE_USE_ADAPTIVE_RX, > + ETHTOOL_COALESCE_USECS | ETHTOOL_COALESCE_USE_ADAPTIVE_RX | > + ETHTOOL_COALESCE_RX_EQE_PROFILE, > .get_drvinfo = virtnet_get_drvinfo, > .get_link = ethtool_op_get_link, > .get_ringparam = virtnet_get_ringparam, > -- > 1.8.3.1 ^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: [PATCH net-next v2 2/2] virtio-net: support dim profile fine-tuning 2024-03-28 7:27 ` Michael S. Tsirkin @ 2024-03-28 7:51 ` Heng Qi 0 siblings, 0 replies; 14+ messages in thread From: Heng Qi @ 2024-03-28 7:51 UTC (permalink / raw) To: Michael S. Tsirkin Cc: netdev, Jakub Kicinski, Eric Dumazet, Paolo Abeni, Vladimir Oltean, David S. Miller, Jason Wang, Xuan Zhuo 在 2024/3/28 下午3:27, Michael S. Tsirkin 写道: > On Wed, Mar 27, 2024 at 05:19:06PM +0800, Heng Qi wrote: >> Virtio-net has different types of back-end device >> implementations. In order to effectively optimize >> the dim library's gains for different device >> implementations, let's use the new interface params >> to fine-tune the profile list. >> >> Signed-off-by: Heng Qi <hengqi@linux.alibaba.com> >> --- >> drivers/net/virtio_net.c | 54 ++++++++++++++++++++++++++++++++++++++++++++++-- >> 1 file changed, 52 insertions(+), 2 deletions(-) >> >> diff --git a/drivers/net/virtio_net.c b/drivers/net/virtio_net.c >> index e709d44..9b6c727 100644 >> --- a/drivers/net/virtio_net.c >> +++ b/drivers/net/virtio_net.c >> @@ -57,6 +57,16 @@ >> >> #define VIRTNET_DRIVER_VERSION "1.0.0" >> >> +/* This is copied from NET_DIM_RX_EQE_PROFILES in DIM library */ > So maybe move it to a header and reuse? Will do. And plan to put configurable parameters into 'vi'. Thanks. > > >> +#define VIRTNET_DIM_RX_PKTS 256 >> +static struct dim_cq_moder rx_eqe_conf[] = { >> + {.usec = 1, .pkts = VIRTNET_DIM_RX_PKTS,}, >> + {.usec = 8, .pkts = VIRTNET_DIM_RX_PKTS,}, >> + {.usec = 64, .pkts = VIRTNET_DIM_RX_PKTS,}, >> + {.usec = 128, .pkts = VIRTNET_DIM_RX_PKTS,}, >> + {.usec = 256, .pkts = VIRTNET_DIM_RX_PKTS,} >> +}; >> + >> static const unsigned long guest_offloads[] = { >> VIRTIO_NET_F_GUEST_TSO4, >> VIRTIO_NET_F_GUEST_TSO6, >> @@ -3584,7 +3594,10 @@ static void virtnet_rx_dim_work(struct work_struct *work) >> if (!rq->dim_enabled) >> continue; >> >> - update_moder = net_dim_get_rx_moderation(dim->mode, dim->profile_ix); >> + if (dim->profile_ix >= ARRAY_SIZE(rx_eqe_conf)) >> + dim->profile_ix = ARRAY_SIZE(rx_eqe_conf) - 1; >> + >> + update_moder = rx_eqe_conf[dim->profile_ix]; >> if (update_moder.usec != rq->intr_coal.max_usecs || >> update_moder.pkts != rq->intr_coal.max_packets) { >> err = virtnet_send_rx_ctrl_coal_vq_cmd(vi, qnum, >> @@ -3627,6 +3640,34 @@ static int virtnet_should_update_vq_weight(int dev_flags, int weight, >> return 0; >> } >> >> +static int virtnet_update_profile(struct virtnet_info *vi, >> + struct kernel_ethtool_coalesce *kc) >> +{ >> + int i; >> + >> + if (virtio_has_feature(vi->vdev, VIRTIO_NET_F_VQ_NOTF_COAL)) { >> + for (i = 0; i < NET_DIM_PARAMS_NUM_PROFILES; i++) >> + if (kc->rx_eqe_profs[i].comps) >> + return -EINVAL; >> + } else { >> + for (i = 0; i < NET_DIM_PARAMS_NUM_PROFILES; i++) { >> + if (kc->rx_eqe_profs[i].usec != rx_eqe_conf[i].usec || >> + kc->rx_eqe_profs[i].pkts != rx_eqe_conf[i].pkts || >> + kc->rx_eqe_profs[i].comps) >> + return -EINVAL; >> + } >> + >> + return 0; >> + } >> + >> + for (i = 0; i < NET_DIM_PARAMS_NUM_PROFILES; i++) { >> + rx_eqe_conf[i].usec = kc->rx_eqe_profs[i].usec; >> + rx_eqe_conf[i].pkts = kc->rx_eqe_profs[i].pkts; >> + } >> + >> + return 0; >> +} >> + >> static int virtnet_set_coalesce(struct net_device *dev, >> struct ethtool_coalesce *ec, >> struct kernel_ethtool_coalesce *kernel_coal, >> @@ -3653,6 +3694,10 @@ static int virtnet_set_coalesce(struct net_device *dev, >> } >> } >> >> + ret = virtnet_update_profile(vi, kernel_coal); >> + if (ret) >> + return ret; >> + >> if (virtio_has_feature(vi->vdev, VIRTIO_NET_F_NOTF_COAL)) >> ret = virtnet_send_notf_coal_cmds(vi, ec); >> else >> @@ -3689,6 +3734,10 @@ static int virtnet_get_coalesce(struct net_device *dev, >> ec->tx_max_coalesced_frames = 1; >> } >> >> + if (virtio_has_feature(vi->vdev, VIRTIO_NET_F_VQ_NOTF_COAL)) >> + memcpy(kernel_coal->rx_eqe_profs, rx_eqe_conf, >> + sizeof(rx_eqe_conf)); >> + >> return 0; >> } >> >> @@ -3868,7 +3917,8 @@ static int virtnet_set_rxnfc(struct net_device *dev, struct ethtool_rxnfc *info) >> >> static const struct ethtool_ops virtnet_ethtool_ops = { >> .supported_coalesce_params = ETHTOOL_COALESCE_MAX_FRAMES | >> - ETHTOOL_COALESCE_USECS | ETHTOOL_COALESCE_USE_ADAPTIVE_RX, >> + ETHTOOL_COALESCE_USECS | ETHTOOL_COALESCE_USE_ADAPTIVE_RX | >> + ETHTOOL_COALESCE_RX_EQE_PROFILE, >> .get_drvinfo = virtnet_get_drvinfo, >> .get_link = ethtool_op_get_link, >> .get_ringparam = virtnet_get_ringparam, >> -- >> 1.8.3.1 ^ permalink raw reply [flat|nested] 14+ messages in thread
end of thread, other threads:[~2024-03-29 15:18 UTC | newest] Thread overview: 14+ messages (download: mbox.gz follow: Atom feed -- links below jump to the message on this page -- 2024-03-27 9:19 [PATCH net-next v2 0/2] ethtool: provide the dim profile fine-tuning channel Heng Qi 2024-03-27 9:19 ` [PATCH net-next v2 1/2] ethtool: provide customized dim profile management Heng Qi 2024-03-27 9:19 ` [PATCH net-next v2 2/2] virtio-net: support dim profile fine-tuning Heng Qi 2024-03-27 14:45 ` Alexander Lobakin 2024-03-28 0:32 ` Jakub Kicinski 2024-03-28 2:12 ` Xuan Zhuo 2024-03-28 16:48 ` Jakub Kicinski 2024-03-29 8:56 ` Heng Qi 2024-03-29 15:18 ` Jakub Kicinski 2024-03-28 2:26 ` Heng Qi 2024-03-28 2:02 ` Heng Qi 2024-03-28 7:27 ` Michael S. Tsirkin 2024-03-28 7:27 ` Michael S. Tsirkin 2024-03-28 7:51 ` Heng Qi
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for NNTP newsgroup(s).