* [PATCH net-next v2 2/3] net: ethtool: Add impedance mismatch result code to cable test
2024-03-27 16:29 [PATCH net-next v2 1/3] net: phy: marvell: add basic support of 88E308X/88E609X family Pawel Dembicki
@ 2024-03-27 16:29 ` Pawel Dembicki
2024-03-29 2:02 ` Jakub Kicinski
2024-03-27 16:29 ` [PATCH net-next v2 3/3] net: phy: marvell: implement cable-test for 88E308X/88E609X family Pawel Dembicki
1 sibling, 1 reply; 6+ messages in thread
From: Pawel Dembicki @ 2024-03-27 16:29 UTC (permalink / raw)
To: netdev
Cc: Pawel Dembicki, Andrew Lunn, Heiner Kallweit, Russell King,
David S. Miller, Eric Dumazet, Jakub Kicinski, Paolo Abeni,
Stefan Eichenberger, Dimitri Fedrau, Kory Maincent,
Maxime Chevallier, Shay Agroskin, Ahmed Zaki, linux-kernel
Some PHYs can recognize during a cable test if the impedance in the cable
is okay.
This commit introduces a new result code:
ETHTOOL_A_CABLE_RESULT_CODE_IMPEDANCE_MISMATCH
which represents the results of a cable test indicating abnormal impedance.
Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
---
v2:
- introduce patch
include/uapi/linux/ethtool_netlink.h | 1 +
1 file changed, 1 insertion(+)
diff --git a/include/uapi/linux/ethtool_netlink.h b/include/uapi/linux/ethtool_netlink.h
index 3f89074aa06c..ecc020bd47d1 100644
--- a/include/uapi/linux/ethtool_netlink.h
+++ b/include/uapi/linux/ethtool_netlink.h
@@ -515,6 +515,7 @@ enum {
ETHTOOL_A_CABLE_RESULT_CODE_OPEN,
ETHTOOL_A_CABLE_RESULT_CODE_SAME_SHORT,
ETHTOOL_A_CABLE_RESULT_CODE_CROSS_SHORT,
+ ETHTOOL_A_CABLE_RESULT_CODE_IMPEDANCE_MISMATCH,
};
enum {
--
2.25.1
^ permalink raw reply related [flat|nested] 6+ messages in thread* [PATCH net-next v2 3/3] net: phy: marvell: implement cable-test for 88E308X/88E609X family
2024-03-27 16:29 [PATCH net-next v2 1/3] net: phy: marvell: add basic support of 88E308X/88E609X family Pawel Dembicki
2024-03-27 16:29 ` [PATCH net-next v2 2/3] net: ethtool: Add impedance mismatch result code to cable test Pawel Dembicki
@ 2024-03-27 16:29 ` Pawel Dembicki
1 sibling, 0 replies; 6+ messages in thread
From: Pawel Dembicki @ 2024-03-27 16:29 UTC (permalink / raw)
To: netdev
Cc: Pawel Dembicki, Andrew Lunn, Heiner Kallweit, Russell King,
David S. Miller, Eric Dumazet, Jakub Kicinski, Paolo Abeni,
Stefan Eichenberger, Dimitri Fedrau, Kory Maincent,
Maxime Chevallier, David Ahern, Shay Agroskin, Ahmed Zaki,
linux-kernel
This commit implements VCT in 88E308X/88E609X Family.
It require two workarounds with some magic configuration.
Regular use require only one register configuration. But Open Circuit
require second workaround.
It cause implementation two phases for fault length measuring.
Fast Ethernet PHY have implemented very simple version of VCT. It's
complitley different than vct5 or vct7.
Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
---
v2:
- change 'm88e3082_vct_distrfln_2_cm' to static
- simplify 'm88e3082_vct_cable_test_get_status'
- replace magic numbers in MII_BMCR configuration
- remove unnecessary backup of MII_BMCR register
- use ETHTOOL_A_CABLE_RESULT_CODE_IMPEDANCE_MISMATCH for impedance
mismatch
drivers/net/phy/marvell.c | 208 ++++++++++++++++++++++++++++++++++++++
1 file changed, 208 insertions(+)
diff --git a/drivers/net/phy/marvell.c b/drivers/net/phy/marvell.c
index fae7eb57ee2c..7c00f47e4ded 100644
--- a/drivers/net/phy/marvell.c
+++ b/drivers/net/phy/marvell.c
@@ -279,6 +279,23 @@
#define MII_VCT7_CTRL_METERS BIT(10)
#define MII_VCT7_CTRL_CENTIMETERS 0
+#define MII_VCT_TXPINS 0x1A
+#define MII_VCT_RXPINS 0x1B
+#define MII_VCT_TXPINS_ENVCT BIT(15)
+#define MII_VCT_TXRXPINS_VCTTST GENMASK(14, 13)
+#define MII_VCT_TXRXPINS_VCTTST_SHIFT 13
+#define MII_VCT_TXRXPINS_VCTTST_OK 0
+#define MII_VCT_TXRXPINS_VCTTST_SHORT 1
+#define MII_VCT_TXRXPINS_VCTTST_OPEN 2
+#define MII_VCT_TXRXPINS_VCTTST_FAIL 3
+#define MII_VCT_TXRXPINS_AMPRFLN GENMASK(12, 8)
+#define MII_VCT_TXRXPINS_AMPRFLN_SHIFT 8
+#define MII_VCT_TXRXPINS_DISTRFLN GENMASK(7, 0)
+#define MII_VCT_TXRXPINS_DISTRFLN_MAX 0xff
+
+#define M88E3082_PAIR_A BIT(0)
+#define M88E3082_PAIR_B BIT(1)
+
#define LPA_PAUSE_FIBER 0x180
#define LPA_PAUSE_ASYM_FIBER 0x100
@@ -301,6 +318,12 @@ static struct marvell_hw_stat marvell_hw_stats[] = {
{ "phy_receive_errors_fiber", 1, 21, 16},
};
+enum {
+ M88E3082_VCT_OFF,
+ M88E3082_VCT_PHASE1,
+ M88E3082_VCT_PHASE2,
+};
+
struct marvell_priv {
u64 stats[ARRAY_SIZE(marvell_hw_stats)];
char *hwmon_name;
@@ -310,6 +333,7 @@ struct marvell_priv {
u32 last;
u32 step;
s8 pair;
+ u8 vct_phase;
};
static int marvell_read_page(struct phy_device *phydev)
@@ -2417,6 +2441,188 @@ static int marvell_vct7_cable_test_get_status(struct phy_device *phydev,
return 0;
}
+static int m88e3082_vct_cable_test_start(struct phy_device *phydev)
+{
+ struct marvell_priv *priv = phydev->priv;
+ int ret;
+
+ /* It needs some magic workarounds described in VCT manual for this PHY.
+ */
+ ret = phy_write(phydev, 29, 0x0003);
+ if (ret < 0)
+ return ret;
+
+ ret = phy_write(phydev, 30, 0x6440);
+ if (ret < 0)
+ return ret;
+
+ if (priv->vct_phase == M88E3082_VCT_PHASE1) {
+ ret = phy_write(phydev, 29, 0x000a);
+ if (ret < 0)
+ return ret;
+
+ ret = phy_write(phydev, 30, 0x0002);
+ if (ret < 0)
+ return ret;
+ }
+
+ ret = phy_write(phydev, MII_BMCR,
+ BMCR_RESET | BMCR_SPEED100 | BMCR_FULLDPLX);
+ if (ret < 0)
+ return ret;
+
+ ret = phy_write(phydev, MII_VCT_TXPINS, MII_VCT_TXPINS_ENVCT);
+ if (ret < 0)
+ return ret;
+
+ ret = phy_write(phydev, 29, 0x0003);
+ if (ret < 0)
+ return ret;
+
+ ret = phy_write(phydev, 30, 0x0);
+ if (ret < 0)
+ return ret;
+
+ if (priv->vct_phase == M88E3082_VCT_OFF) {
+ priv->vct_phase = M88E3082_VCT_PHASE1;
+ priv->pair = 0;
+
+ return 0;
+ }
+
+ ret = phy_write(phydev, 29, 0x000a);
+ if (ret < 0)
+ return ret;
+
+ ret = phy_write(phydev, 30, 0x0);
+ if (ret < 0)
+ return ret;
+
+ priv->vct_phase = M88E3082_VCT_PHASE2;
+
+ return 0;
+}
+
+static int m88e3082_vct_cable_test_report_trans(int result, u8 distance)
+{
+ switch (result) {
+ case MII_VCT_TXRXPINS_VCTTST_OK:
+ if (distance == MII_VCT_TXRXPINS_DISTRFLN_MAX)
+ return ETHTOOL_A_CABLE_RESULT_CODE_OK;
+ return ETHTOOL_A_CABLE_RESULT_CODE_IMPEDANCE_MISMATCH;
+ case MII_VCT_TXRXPINS_VCTTST_SHORT:
+ return ETHTOOL_A_CABLE_RESULT_CODE_SAME_SHORT;
+ case MII_VCT_TXRXPINS_VCTTST_OPEN:
+ return ETHTOOL_A_CABLE_RESULT_CODE_OPEN;
+ default:
+ return ETHTOOL_A_CABLE_RESULT_CODE_UNSPEC;
+ }
+}
+
+static u32 m88e3082_vct_distrfln_2_cm(u8 distrfln)
+{
+ if (distrfln < 24)
+ return 0;
+
+ /* Original function for meters: y = 0.7861x - 18.862 */
+ return (7861 * distrfln - 188620) / 100;
+}
+
+static int m88e3082_vct_cable_test_get_status(struct phy_device *phydev,
+ bool *finished)
+{
+ u8 tx_vcttst_res, rx_vcttst_res, tx_distrfln, rx_distrfln;
+ struct marvell_priv *priv = phydev->priv;
+ int ret, tx_result, rx_result;
+ bool done_phase = true;
+
+ *finished = false;
+
+ ret = phy_read(phydev, MII_VCT_TXPINS);
+ if (ret < 0)
+ return ret;
+ else if (ret & MII_VCT_TXPINS_ENVCT)
+ return 0;
+
+ tx_distrfln = ret & MII_VCT_TXRXPINS_DISTRFLN;
+ tx_vcttst_res = (ret & MII_VCT_TXRXPINS_VCTTST) >>
+ MII_VCT_TXRXPINS_VCTTST_SHIFT;
+
+ ret = phy_read(phydev, MII_VCT_RXPINS);
+ if (ret < 0)
+ return ret;
+
+ rx_distrfln = ret & MII_VCT_TXRXPINS_DISTRFLN;
+ rx_vcttst_res = (ret & MII_VCT_TXRXPINS_VCTTST) >>
+ MII_VCT_TXRXPINS_VCTTST_SHIFT;
+
+ *finished = true;
+
+ switch (priv->vct_phase) {
+ case M88E3082_VCT_PHASE1:
+ tx_result = m88e3082_vct_cable_test_report_trans(tx_vcttst_res,
+ tx_distrfln);
+ rx_result = m88e3082_vct_cable_test_report_trans(rx_vcttst_res,
+ rx_distrfln);
+
+ ethnl_cable_test_result(phydev, ETHTOOL_A_CABLE_PAIR_A,
+ tx_result);
+ ethnl_cable_test_result(phydev, ETHTOOL_A_CABLE_PAIR_B,
+ rx_result);
+
+ if (tx_vcttst_res == MII_VCT_TXRXPINS_VCTTST_OPEN) {
+ done_phase = false;
+ priv->pair |= M88E3082_PAIR_A;
+ } else if (tx_distrfln < MII_VCT_TXRXPINS_DISTRFLN_MAX) {
+ u8 pair = ETHTOOL_A_CABLE_PAIR_A;
+ u32 cm = m88e3082_vct_distrfln_2_cm(tx_distrfln);
+
+ ethnl_cable_test_fault_length(phydev, pair, cm);
+ }
+
+ if (rx_vcttst_res == MII_VCT_TXRXPINS_VCTTST_OPEN) {
+ done_phase = false;
+ priv->pair |= M88E3082_PAIR_B;
+ } else if (rx_distrfln < MII_VCT_TXRXPINS_DISTRFLN_MAX) {
+ u8 pair = ETHTOOL_A_CABLE_PAIR_B;
+ u32 cm = m88e3082_vct_distrfln_2_cm(rx_distrfln);
+
+ ethnl_cable_test_fault_length(phydev, pair, cm);
+ }
+
+ break;
+ case M88E3082_VCT_PHASE2:
+ if (priv->pair & M88E3082_PAIR_A &&
+ tx_vcttst_res == MII_VCT_TXRXPINS_VCTTST_OPEN &&
+ tx_distrfln < MII_VCT_TXRXPINS_DISTRFLN_MAX) {
+ u8 pair = ETHTOOL_A_CABLE_PAIR_A;
+ u32 cm = m88e3082_vct_distrfln_2_cm(tx_distrfln);
+
+ ethnl_cable_test_fault_length(phydev, pair, cm);
+ }
+ if (priv->pair & M88E3082_PAIR_B &&
+ rx_vcttst_res == MII_VCT_TXRXPINS_VCTTST_OPEN &&
+ rx_distrfln < MII_VCT_TXRXPINS_DISTRFLN_MAX) {
+ u8 pair = ETHTOOL_A_CABLE_PAIR_B;
+ u32 cm = m88e3082_vct_distrfln_2_cm(rx_distrfln);
+
+ ethnl_cable_test_fault_length(phydev, pair, cm);
+ }
+
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ if (!done_phase) {
+ *finished = false;
+ return m88e3082_vct_cable_test_start(phydev);
+ }
+ if (*finished)
+ priv->vct_phase = M88E3082_VCT_OFF;
+ return 0;
+}
+
#ifdef CONFIG_HWMON
struct marvell_hwmon_ops {
int (*config)(struct phy_device *phydev);
@@ -3300,6 +3506,8 @@ static struct phy_driver marvell_drivers[] = {
.read_status = marvell_read_status,
.resume = genphy_resume,
.suspend = genphy_suspend,
+ .cable_test_start = m88e3082_vct_cable_test_start,
+ .cable_test_get_status = m88e3082_vct_cable_test_get_status,
},
{
.phy_id = MARVELL_PHY_ID_88E1112,
--
2.25.1
^ permalink raw reply related [flat|nested] 6+ messages in thread