[PATCH 1/2] net: ks8851: Inline ks8851_rx_skb()

[PATCH 1/2] net: ks8851: Inline ks8851_rx_skb()

[Marek Vasut]

Both ks8851_rx_skb_par() and ks8851_rx_skb_spi() call netif_rx(skb),
inline the netif_rx(skb) call directly into ks8851_common.c and drop
the .rx_skb callback and ks8851_rx_skb() wrapper. This removes one
indirect call from the driver, no functional change otherwise.

Signed-off-by: Marek Vasut <marex@denx.de>
---
Cc: "David S. Miller" <davem@davemloft.net>
Cc: "Uwe Kleine-König" <u.kleine-koenig@pengutronix.de>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Mark Brown <broonie@kernel.org>
Cc: Paolo Abeni <pabeni@redhat.com>
Cc: Ronald Wahl <ronald.wahl@raritan.com>
Cc: Simon Horman <horms@kernel.org>
Cc: netdev@vger.kernel.org
---
 drivers/net/ethernet/micrel/ks8851.h        |  3 ---
 drivers/net/ethernet/micrel/ks8851_common.c | 12 +-----------
 drivers/net/ethernet/micrel/ks8851_par.c    | 11 -----------
 drivers/net/ethernet/micrel/ks8851_spi.c    | 11 -----------
 4 files changed, 1 insertion(+), 36 deletions(-)

diff --git a/drivers/net/ethernet/micrel/ks8851.h b/drivers/net/ethernet/micrel/ks8851.h
index e5ec0a363aff8..31f75b4a67fd7 100644
--- a/drivers/net/ethernet/micrel/ks8851.h
+++ b/drivers/net/ethernet/micrel/ks8851.h
@@ -368,7 +368,6 @@ union ks8851_tx_hdr {
  * @rdfifo: FIFO read callback
  * @wrfifo: FIFO write callback
  * @start_xmit: start_xmit() implementation callback
- * @rx_skb: rx_skb() implementation callback
  * @flush_tx_work: flush_tx_work() implementation callback
  *
  * The @statelock is used to protect information in the structure which may
@@ -423,8 +422,6 @@ struct ks8851_net {
 					  struct sk_buff *txp, bool irq);
 	netdev_tx_t		(*start_xmit)(struct sk_buff *skb,
 					      struct net_device *dev);
-	void			(*rx_skb)(struct ks8851_net *ks,
-					  struct sk_buff *skb);
 	void			(*flush_tx_work)(struct ks8851_net *ks);
 };
 
diff --git a/drivers/net/ethernet/micrel/ks8851_common.c b/drivers/net/ethernet/micrel/ks8851_common.c
index 0bf13b38b8f5b..896d43bb8883d 100644
--- a/drivers/net/ethernet/micrel/ks8851_common.c
+++ b/drivers/net/ethernet/micrel/ks8851_common.c
@@ -231,16 +231,6 @@ static void ks8851_dbg_dumpkkt(struct ks8851_net *ks, u8 *rxpkt)
 		   rxpkt[12], rxpkt[13], rxpkt[14], rxpkt[15]);
 }
 
-/**
- * ks8851_rx_skb - receive skbuff
- * @ks: The device state.
- * @skb: The skbuff
- */
-static void ks8851_rx_skb(struct ks8851_net *ks, struct sk_buff *skb)
-{
-	ks->rx_skb(ks, skb);
-}
-
 /**
  * ks8851_rx_pkts - receive packets from the host
  * @ks: The device information.
@@ -309,7 +299,7 @@ static void ks8851_rx_pkts(struct ks8851_net *ks)
 					ks8851_dbg_dumpkkt(ks, rxpkt);
 
 				skb->protocol = eth_type_trans(skb, ks->netdev);
-				ks8851_rx_skb(ks, skb);
+				netif_rx(skb);
 
 				ks->netdev->stats.rx_packets++;
 				ks->netdev->stats.rx_bytes += rxlen;
diff --git a/drivers/net/ethernet/micrel/ks8851_par.c b/drivers/net/ethernet/micrel/ks8851_par.c
index 2a7f298542670..381b9cd285ebd 100644
--- a/drivers/net/ethernet/micrel/ks8851_par.c
+++ b/drivers/net/ethernet/micrel/ks8851_par.c
@@ -210,16 +210,6 @@ static void ks8851_wrfifo_par(struct ks8851_net *ks, struct sk_buff *txp,
 	iowrite16_rep(ksp->hw_addr, txp->data, len / 2);
 }
 
-/**
- * ks8851_rx_skb_par - receive skbuff
- * @ks: The device state.
- * @skb: The skbuff
- */
-static void ks8851_rx_skb_par(struct ks8851_net *ks, struct sk_buff *skb)
-{
-	netif_rx(skb);
-}
-
 static unsigned int ks8851_rdreg16_par_txqcr(struct ks8851_net *ks)
 {
 	return ks8851_rdreg16_par(ks, KS_TXQCR);
@@ -298,7 +288,6 @@ static int ks8851_probe_par(struct platform_device *pdev)
 	ks->rdfifo = ks8851_rdfifo_par;
 	ks->wrfifo = ks8851_wrfifo_par;
 	ks->start_xmit = ks8851_start_xmit_par;
-	ks->rx_skb = ks8851_rx_skb_par;
 
 #define STD_IRQ (IRQ_LCI |	/* Link Change */	\
 		 IRQ_RXI |	/* RX done */		\
diff --git a/drivers/net/ethernet/micrel/ks8851_spi.c b/drivers/net/ethernet/micrel/ks8851_spi.c
index 2f803377c9f9d..670c1de966db8 100644
--- a/drivers/net/ethernet/micrel/ks8851_spi.c
+++ b/drivers/net/ethernet/micrel/ks8851_spi.c
@@ -298,16 +298,6 @@ static unsigned int calc_txlen(unsigned int len)
 	return ALIGN(len + 4, 4);
 }
 
-/**
- * ks8851_rx_skb_spi - receive skbuff
- * @ks: The device state
- * @skb: The skbuff
- */
-static void ks8851_rx_skb_spi(struct ks8851_net *ks, struct sk_buff *skb)
-{
-	netif_rx(skb);
-}
-
 /**
  * ks8851_tx_work - process tx packet(s)
  * @work: The work strucutre what was scheduled.
@@ -435,7 +425,6 @@ static int ks8851_probe_spi(struct spi_device *spi)
 	ks->rdfifo = ks8851_rdfifo_spi;
 	ks->wrfifo = ks8851_wrfifo_spi;
 	ks->start_xmit = ks8851_start_xmit_spi;
-	ks->rx_skb = ks8851_rx_skb_spi;
 	ks->flush_tx_work = ks8851_flush_tx_work_spi;
 
 #define STD_IRQ (IRQ_LCI |	/* Link Change */	\
-- 
2.43.0

[PATCH 2/2] net: ks8851: Handle softirqs at the end of IRQ thread to fix hang

[Marek Vasut]

The ks8851_irq() thread may call ks8851_rx_pkts() in case there are
any packets in the MAC FIFO, which calls netif_rx(). This netif_rx()
implementation is guarded by local_bh_disable() and local_bh_enable().
The local_bh_enable() may call do_softirq() to run softirqs in case
any are pending. One of the softirqs is net_rx_action, which ultimately
reaches the driver .start_xmit callback. If that happens, the system
hangs. The entire call chain is below:

ks8851_start_xmit_par from netdev_start_xmit
netdev_start_xmit from dev_hard_start_xmit
dev_hard_start_xmit from sch_direct_xmit
sch_direct_xmit from __dev_queue_xmit
__dev_queue_xmit from __neigh_update
__neigh_update from neigh_update
neigh_update from arp_process.constprop.0
arp_process.constprop.0 from __netif_receive_skb_one_core
__netif_receive_skb_one_core from process_backlog
process_backlog from __napi_poll.constprop.0
__napi_poll.constprop.0 from net_rx_action
net_rx_action from __do_softirq
__do_softirq from call_with_stack
call_with_stack from do_softirq
do_softirq from __local_bh_enable_ip
__local_bh_enable_ip from netif_rx
netif_rx from ks8851_irq
ks8851_irq from irq_thread_fn
irq_thread_fn from irq_thread
irq_thread from kthread
kthread from ret_from_fork

The hang happens because ks8851_irq() first locks a spinlock in
ks8851_par.c ks8851_lock_par() spin_lock_irqsave(&ksp->lock, ...)
and with that spinlock locked, calls netif_rx(). Once the execution
reaches ks8851_start_xmit_par(), it calls ks8851_lock_par() again
which attempts to claim the already locked spinlock again, and the
hang happens.

Move the do_softirq() call outside of the spinlock protected section
of ks8851_irq() by disabling BHs around the entire spinlock protected
section of ks8851_irq() handler. Place local_bh_enable() outside of
the spinlock protected section, so that it can trigger do_softirq()
without the ks8851_par.c ks8851_lock_par() spinlock being held, and
safely call ks8851_start_xmit_par() without attempting to lock the
already locked spinlock.

Since ks8851_irq() is protected by local_bh_disable()/local_bh_enable()
now, replace netif_rx() with __netif_rx() which is not duplicating the
local_bh_disable()/local_bh_enable() calls.

Fixes: 797047f875b5 ("net: ks8851: Implement Parallel bus operations")
Signed-off-by: Marek Vasut <marex@denx.de>
---
Cc: "David S. Miller" <davem@davemloft.net>
Cc: "Uwe Kleine-König" <u.kleine-koenig@pengutronix.de>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Mark Brown <broonie@kernel.org>
Cc: Paolo Abeni <pabeni@redhat.com>
Cc: Ronald Wahl <ronald.wahl@raritan.com>
Cc: Simon Horman <horms@kernel.org>
Cc: netdev@vger.kernel.org
---
 drivers/net/ethernet/micrel/ks8851_common.c | 9 ++++++++-
 1 file changed, 8 insertions(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/micrel/ks8851_common.c b/drivers/net/ethernet/micrel/ks8851_common.c
index 896d43bb8883d..b6b727e651f3d 100644
--- a/drivers/net/ethernet/micrel/ks8851_common.c
+++ b/drivers/net/ethernet/micrel/ks8851_common.c
@@ -299,7 +299,7 @@ static void ks8851_rx_pkts(struct ks8851_net *ks)
 					ks8851_dbg_dumpkkt(ks, rxpkt);
 
 				skb->protocol = eth_type_trans(skb, ks->netdev);
-				netif_rx(skb);
+				__netif_rx(skb);
 
 				ks->netdev->stats.rx_packets++;
 				ks->netdev->stats.rx_bytes += rxlen;
@@ -325,11 +325,15 @@ static void ks8851_rx_pkts(struct ks8851_net *ks)
  */
 static irqreturn_t ks8851_irq(int irq, void *_ks)
 {
+	bool need_bh_off = !(hardirq_count() | softirq_count());
 	struct ks8851_net *ks = _ks;
 	unsigned handled = 0;
 	unsigned long flags;
 	unsigned int status;
 
+	if (need_bh_off)
+		local_bh_disable();
+
 	ks8851_lock(ks, &flags);
 
 	status = ks8851_rdreg16(ks, KS_ISR);
@@ -406,6 +410,9 @@ static irqreturn_t ks8851_irq(int irq, void *_ks)
 	if (status & IRQ_LCI)
 		mii_check_link(&ks->mii);
 
+	if (need_bh_off)
+		local_bh_enable();
+
 	return IRQ_HANDLED;
 }
 
-- 
2.43.0

Re: [PATCH 2/2] net: ks8851: Handle softirqs at the end of IRQ thread to fix hang

[Ratheesh Kannoth]

On 2024-03-31 at 19:51:46, Marek Vasut (marex@denx.de) wrote:
> The ks8851_irq() thread may call ks8851_rx_pkts() in case there are
> any packets in the MAC FIFO, which calls netif_rx(). This netif_rx()
> implementation is guarded by local_bh_disable() and local_bh_enable().
> The local_bh_enable() may call do_softirq() to run softirqs in case
> any are pending. One of the softirqs is net_rx_action, which ultimately
> reaches the driver .start_xmit callback. If that happens, the system
> hangs. The entire call chain is below:
>
> ks8851_start_xmit_par from netdev_start_xmit
> netdev_start_xmit from dev_hard_start_xmit
> dev_hard_start_xmit from sch_direct_xmit
> sch_direct_xmit from __dev_queue_xmit
> __dev_queue_xmit from __neigh_update
> __neigh_update from neigh_update
> neigh_update from arp_process.constprop.0
> arp_process.constprop.0 from __netif_receive_skb_one_core
> __netif_receive_skb_one_core from process_backlog
> process_backlog from __napi_poll.constprop.0
> __napi_poll.constprop.0 from net_rx_action
> net_rx_action from __do_softirq
> __do_softirq from call_with_stack
> call_with_stack from do_softirq
> do_softirq from __local_bh_enable_ip
> __local_bh_enable_ip from netif_rx
> netif_rx from ks8851_irq
> ks8851_irq from irq_thread_fn
> irq_thread_fn from irq_thread
> irq_thread from kthread
> kthread from ret_from_fork
>
> The hang happens because ks8851_irq() first locks a spinlock in
> ks8851_par.c ks8851_lock_par() spin_lock_irqsave(&ksp->lock, ...)
> and with that spinlock locked, calls netif_rx(). Once the execution
> reaches ks8851_start_xmit_par(), it calls ks8851_lock_par() again
> which attempts to claim the already locked spinlock again, and the
> hang happens.
>
> Move the do_softirq() call outside of the spinlock protected section
> of ks8851_irq() by disabling BHs around the entire spinlock protected
> section of ks8851_irq() handler. Place local_bh_enable() outside of
> the spinlock protected section, so that it can trigger do_softirq()
> without the ks8851_par.c ks8851_lock_par() spinlock being held, and
> safely call ks8851_start_xmit_par() without attempting to lock the
> already locked spinlock.
>
> Since ks8851_irq() is protected by local_bh_disable()/local_bh_enable()
> now, replace netif_rx() with __netif_rx() which is not duplicating the
> local_bh_disable()/local_bh_enable() calls.
>
> Fixes: 797047f875b5 ("net: ks8851: Implement Parallel bus operations")
> Signed-off-by: Marek Vasut <marex@denx.de>
> ---
> Cc: "David S. Miller" <davem@davemloft.net>
> Cc: "Uwe Kleine-König" <u.kleine-koenig@pengutronix.de>
> Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
> Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com>
> Cc: Eric Dumazet <edumazet@google.com>
> Cc: Jakub Kicinski <kuba@kernel.org>
> Cc: Mark Brown <broonie@kernel.org>
> Cc: Paolo Abeni <pabeni@redhat.com>
> Cc: Ronald Wahl <ronald.wahl@raritan.com>
> Cc: Simon Horman <horms@kernel.org>
> Cc: netdev@vger.kernel.org
> ---
>  drivers/net/ethernet/micrel/ks8851_common.c | 9 ++++++++-
>  1 file changed, 8 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/net/ethernet/micrel/ks8851_common.c b/drivers/net/ethernet/micrel/ks8851_common.c
> index 896d43bb8883d..b6b727e651f3d 100644
> --- a/drivers/net/ethernet/micrel/ks8851_common.c
> +++ b/drivers/net/ethernet/micrel/ks8851_common.c
> @@ -299,7 +299,7 @@ static void ks8851_rx_pkts(struct ks8851_net *ks)
>  					ks8851_dbg_dumpkkt(ks, rxpkt);
>
>  				skb->protocol = eth_type_trans(skb, ks->netdev);
> -				netif_rx(skb);
> +				__netif_rx(skb);
>
>  				ks->netdev->stats.rx_packets++;
>  				ks->netdev->stats.rx_bytes += rxlen;
> @@ -325,11 +325,15 @@ static void ks8851_rx_pkts(struct ks8851_net *ks)
>   */
>  static irqreturn_t ks8851_irq(int irq, void *_ks)
>  {
> +	bool need_bh_off = !(hardirq_count() | softirq_count());
IMO, in_task() macro would be better.

>  	struct ks8851_net *ks = _ks;
>  	unsigned handled = 0;
>  	unsigned long flags;
>  	unsigned int status;
>
> +	if (need_bh_off)
> +		local_bh_disable();
This threaded irq's thread function (ks8851_irq()) will always run in process context, right ?
Do you need "if(need_bh_off)" loop?

> +
>  	ks8851_lock(ks, &flags);
>
>  	status = ks8851_rdreg16(ks, KS_ISR);
> @@ -406,6 +410,9 @@ static irqreturn_t ks8851_irq(int irq, void *_ks)
>  	if (status & IRQ_LCI)
>  		mii_check_link(&ks->mii);
>
> +	if (need_bh_off)
> +		local_bh_enable();
> +
>  	return IRQ_HANDLED;
>  }
>
> --
> 2.43.0
>

Re: [PATCH 2/2] net: ks8851: Handle softirqs at the end of IRQ thread to fix hang

[Marek Vasut]

On 4/1/24 6:18 AM, Ratheesh Kannoth wrote:
> On 2024-03-31 at 19:51:46, Marek Vasut (marex@denx.de) wrote:
>> The ks8851_irq() thread may call ks8851_rx_pkts() in case there are
>> any packets in the MAC FIFO, which calls netif_rx(). This netif_rx()
>> implementation is guarded by local_bh_disable() and local_bh_enable().
>> The local_bh_enable() may call do_softirq() to run softirqs in case
>> any are pending. One of the softirqs is net_rx_action, which ultimately
>> reaches the driver .start_xmit callback. If that happens, the system
>> hangs. The entire call chain is below:
>>
>> ks8851_start_xmit_par from netdev_start_xmit
>> netdev_start_xmit from dev_hard_start_xmit
>> dev_hard_start_xmit from sch_direct_xmit
>> sch_direct_xmit from __dev_queue_xmit
>> __dev_queue_xmit from __neigh_update
>> __neigh_update from neigh_update
>> neigh_update from arp_process.constprop.0
>> arp_process.constprop.0 from __netif_receive_skb_one_core
>> __netif_receive_skb_one_core from process_backlog
>> process_backlog from __napi_poll.constprop.0
>> __napi_poll.constprop.0 from net_rx_action
>> net_rx_action from __do_softirq
>> __do_softirq from call_with_stack
>> call_with_stack from do_softirq
>> do_softirq from __local_bh_enable_ip
>> __local_bh_enable_ip from netif_rx
>> netif_rx from ks8851_irq
>> ks8851_irq from irq_thread_fn
>> irq_thread_fn from irq_thread
>> irq_thread from kthread
>> kthread from ret_from_fork
>>
>> The hang happens because ks8851_irq() first locks a spinlock in
>> ks8851_par.c ks8851_lock_par() spin_lock_irqsave(&ksp->lock, ...)
>> and with that spinlock locked, calls netif_rx(). Once the execution
>> reaches ks8851_start_xmit_par(), it calls ks8851_lock_par() again
>> which attempts to claim the already locked spinlock again, and the
>> hang happens.
>>
>> Move the do_softirq() call outside of the spinlock protected section
>> of ks8851_irq() by disabling BHs around the entire spinlock protected
>> section of ks8851_irq() handler. Place local_bh_enable() outside of
>> the spinlock protected section, so that it can trigger do_softirq()
>> without the ks8851_par.c ks8851_lock_par() spinlock being held, and
>> safely call ks8851_start_xmit_par() without attempting to lock the
>> already locked spinlock.
>>
>> Since ks8851_irq() is protected by local_bh_disable()/local_bh_enable()
>> now, replace netif_rx() with __netif_rx() which is not duplicating the
>> local_bh_disable()/local_bh_enable() calls.

[...]

>> diff --git a/drivers/net/ethernet/micrel/ks8851_common.c b/drivers/net/ethernet/micrel/ks8851_common.c
>> index 896d43bb8883d..b6b727e651f3d 100644
>> --- a/drivers/net/ethernet/micrel/ks8851_common.c
>> +++ b/drivers/net/ethernet/micrel/ks8851_common.c
>> @@ -299,7 +299,7 @@ static void ks8851_rx_pkts(struct ks8851_net *ks)
>>   					ks8851_dbg_dumpkkt(ks, rxpkt);
>>
>>   				skb->protocol = eth_type_trans(skb, ks->netdev);
>> -				netif_rx(skb);
>> +				__netif_rx(skb);
>>
>>   				ks->netdev->stats.rx_packets++;
>>   				ks->netdev->stats.rx_bytes += rxlen;
>> @@ -325,11 +325,15 @@ static void ks8851_rx_pkts(struct ks8851_net *ks)
>>    */
>>   static irqreturn_t ks8851_irq(int irq, void *_ks)
>>   {
>> +	bool need_bh_off = !(hardirq_count() | softirq_count());
> IMO, in_task() macro would be better.

I don't think in_task() is exactly identical to !(hardirq_count() | 
softirq_count()) according to include/linux/preempt.h , it also takes 
NMI into consideration. I am not sure if that could pose a problem or not ?

This test here has been taken from net/core/dev.c netif_rx() , it is the 
same one used there around __netif_rx() invocation.

>>   	struct ks8851_net *ks = _ks;
>>   	unsigned handled = 0;
>>   	unsigned long flags;
>>   	unsigned int status;
>>
>> +	if (need_bh_off)
>> +		local_bh_disable();
> This threaded irq's thread function (ks8851_irq()) will always run in process context, right ?

I think so.

> Do you need "if(need_bh_off)" loop?

It is not a loop, it is invoked once. It is here to disable BHs so that 
the net_rx_action BH wouldn't run until after the spinlock protected 
section of the IRQ handler. Te net_rx_action may end up calling 
ks8851_start_xmit_par, which must be called with the spinlock released, 
otherwise the system would lock up.

RE: [EXTERNAL] Re: [PATCH 2/2] net: ks8851: Handle softirqs at the end of IRQ thread to fix hang

[Ratheesh Kannoth]

> From: Marek Vasut <marex@denx.de>
> To: Ratheesh Kannoth <rkannoth@marvell.com>
> Cc: netdev@vger.kernel.org; David S. Miller <davem@davemloft.net>; Uwe
> This test here has been taken from net/core/dev.c netif_rx() , it is the same
> one used there around __netif_rx() invocation.
> 
> >>   	struct ks8851_net *ks = _ks;
> >>   	unsigned handled = 0;
> >>   	unsigned long flags;
> >>   	unsigned int status;
> >>
> >> +	if (need_bh_off)
> >> +		local_bh_disable();
> > This threaded irq's thread function (ks8851_irq()) will always run in process
> context, right ?
> 
> I think so.
> 
> > Do you need "if(need_bh_off)" loop?
My bad. Typo. I meant "if (need_bh_off) statement"; not "loop". 

> It is not a loop, it is invoked once. It is here to disable BHs so that the
> net_rx_action BH wouldn't run until after the spinlock protected section of the
> IRQ handler. Te net_rx_action may end up calling ks8851_start_xmit_par,
> which must be called with the spinlock released, otherwise the system would
> lock up.
I understand that. My question - will there be a case (currently, without this patch)  ks8851_irq()
Is called after disabling local BH.  If it is always called without disabled, can we avoid "if" statement.
altogether?

Re: [PATCH 2/2] net: ks8851: Handle softirqs at the end of IRQ thread to fix hang

[Jakub Kicinski]

On Sun, 31 Mar 2024 16:21:46 +0200 Marek Vasut wrote:
> diff --git a/drivers/net/ethernet/micrel/ks8851_common.c b/drivers/net/ethernet/micrel/ks8851_common.c
> index 896d43bb8883d..b6b727e651f3d 100644
> --- a/drivers/net/ethernet/micrel/ks8851_common.c
> +++ b/drivers/net/ethernet/micrel/ks8851_common.c
> @@ -299,7 +299,7 @@ static void ks8851_rx_pkts(struct ks8851_net *ks)
>  					ks8851_dbg_dumpkkt(ks, rxpkt);
>  
>  				skb->protocol = eth_type_trans(skb, ks->netdev);
> -				netif_rx(skb);
> +				__netif_rx(skb);

maybe return the packets from ks8851_rx_pkts()
(you can put them on a queue / struct sk_buff_head)
and process them once the lock is released?

Also why not NAPI?

>  				ks->netdev->stats.rx_packets++;
>  				ks->netdev->stats.rx_bytes += rxlen;
> @@ -325,11 +325,15 @@ static void ks8851_rx_pkts(struct ks8851_net *ks)
>   */
>  static irqreturn_t ks8851_irq(int irq, void *_ks)
>  {
> +	bool need_bh_off = !(hardirq_count() | softirq_count());

I don't think IRQ / RT developers look approvingly at uses of such
low level macros in drivers.

Re: [EXTERNAL] Re: [PATCH 2/2] net: ks8851: Handle softirqs at the end of IRQ thread to fix hang

[Marek Vasut]

On 4/1/24 4:13 PM, Ratheesh Kannoth wrote:
>> From: Marek Vasut <marex@denx.de>
>> To: Ratheesh Kannoth <rkannoth@marvell.com>
>> Cc: netdev@vger.kernel.org; David S. Miller <davem@davemloft.net>; Uwe
>> This test here has been taken from net/core/dev.c netif_rx() , it is the same
>> one used there around __netif_rx() invocation.
>>
>>>>    	struct ks8851_net *ks = _ks;
>>>>    	unsigned handled = 0;
>>>>    	unsigned long flags;
>>>>    	unsigned int status;
>>>>
>>>> +	if (need_bh_off)
>>>> +		local_bh_disable();
>>> This threaded irq's thread function (ks8851_irq()) will always run in process
>> context, right ?
>>
>> I think so.
>>
>>> Do you need "if(need_bh_off)" loop?
> My bad. Typo. I meant "if (need_bh_off) statement"; not "loop".
> 
>> It is not a loop, it is invoked once. It is here to disable BHs so that the
>> net_rx_action BH wouldn't run until after the spinlock protected section of the
>> IRQ handler. Te net_rx_action may end up calling ks8851_start_xmit_par,
>> which must be called with the spinlock released, otherwise the system would
>> lock up.
> I understand that. My question - will there be a case (currently, without this patch)  ks8851_irq()
> Is called after disabling local BH.  If it is always called without disabled, can we avoid "if" statement.
> altogether?

Aha, I think that makes sense and yes, we can drop the if statement 
altogether. I'll add that into V2.

Re: [PATCH 2/2] net: ks8851: Handle softirqs at the end of IRQ thread to fix hang

[Marek Vasut]

On 4/2/24 6:06 AM, Jakub Kicinski wrote:
> On Sun, 31 Mar 2024 16:21:46 +0200 Marek Vasut wrote:
>> diff --git a/drivers/net/ethernet/micrel/ks8851_common.c b/drivers/net/ethernet/micrel/ks8851_common.c
>> index 896d43bb8883d..b6b727e651f3d 100644
>> --- a/drivers/net/ethernet/micrel/ks8851_common.c
>> +++ b/drivers/net/ethernet/micrel/ks8851_common.c
>> @@ -299,7 +299,7 @@ static void ks8851_rx_pkts(struct ks8851_net *ks)
>>   					ks8851_dbg_dumpkkt(ks, rxpkt);
>>   
>>   				skb->protocol = eth_type_trans(skb, ks->netdev);
>> -				netif_rx(skb);
>> +				__netif_rx(skb);
> 
> maybe return the packets from ks8851_rx_pkts()
> (you can put them on a queue / struct sk_buff_head)
> and process them once the lock is released?

I think that's what netif_rx() basically already does internally in 
netif_rx_internal():

enqueue_to_backlog(skb, smp_processor_id(), &qtail);

> Also why not NAPI?

I am not quite sure what to answer here. Are you asking me to add NAPI 
support to the driver ?

>>   				ks->netdev->stats.rx_packets++;
>>   				ks->netdev->stats.rx_bytes += rxlen;
>> @@ -325,11 +325,15 @@ static void ks8851_rx_pkts(struct ks8851_net *ks)
>>    */
>>   static irqreturn_t ks8851_irq(int irq, void *_ks)
>>   {
>> +	bool need_bh_off = !(hardirq_count() | softirq_count());
> 
> I don't think IRQ / RT developers look approvingly at uses of such
> low level macros in drivers.

I _think_ the need_bh_off will be always true as Ratheesh suggested, so 
this can be dropped. I will test that before doing a V2.

Re: [PATCH 2/2] net: ks8851: Handle softirqs at the end of IRQ thread to fix hang

[Jakub Kicinski]

On Tue, 2 Apr 2024 19:38:26 +0200 Marek Vasut wrote:
> >>   				ks->netdev->stats.rx_packets++;
> >>   				ks->netdev->stats.rx_bytes += rxlen;
> >> @@ -325,11 +325,15 @@ static void ks8851_rx_pkts(struct ks8851_net *ks)
> >>    */
> >>   static irqreturn_t ks8851_irq(int irq, void *_ks)
> >>   {
> >> +	bool need_bh_off = !(hardirq_count() | softirq_count());  
> > 
> > I don't think IRQ / RT developers look approvingly at uses of such
> > low level macros in drivers.  
> 
> I _think_ the need_bh_off will be always true as Ratheesh suggested, so 
> this can be dropped. I will test that before doing a V2.

Quite possibly, seems like a reasonable fix if we don't have to make it
conditional.

Re: [PATCH 2/2] net: ks8851: Handle softirqs at the end of IRQ thread to fix hang

[Ronald Wahl]

Hi,

for the spi version of the chip this change now leads to

[   23.793000] BUG: sleeping function called from invalid context at kernel/locking/mutex.c:283
[   23.801915] in_atomic(): 1, irqs_disabled(): 0, non_block: 0, pid: 857, name: irq/52-eth-link
[   23.810895] preempt_count: 200, expected: 0
[   23.815288] CPU: 0 PID: 857 Comm: irq/52-eth-link Not tainted 6.6.28-sama5 #1
[   23.822790] Hardware name: Atmel SAMA5
[   23.826717]  unwind_backtrace from show_stack+0xb/0xc
[   23.831992]  show_stack from dump_stack_lvl+0x19/0x1e
[   23.837433]  dump_stack_lvl from __might_resched+0xb7/0xec
[   23.843122]  __might_resched from mutex_lock+0xf/0x2c
[   23.848540]  mutex_lock from ks8851_irq+0x1f/0x164
[   23.853525]  ks8851_irq from irq_thread_fn+0xf/0x28
[   23.858776]  irq_thread_fn from irq_thread+0x93/0x130
[   23.864037]  irq_thread from kthread+0x7f/0x90
[   23.868699]  kthread from ret_from_fork+0x11/0x1c

Actually the spi driver variant does not suffer from the issue as it has
different locking so we probably should do the
local_bh_disable/local_bh_enable only for the "par" version. What do you think?

- ron

On 31.03.24 16:21, Marek Vasut wrote:
> [You don't often get email from marex@denx.de. Learn why this is important at https://aka.ms/LearnAboutSenderIdentification ]
>
> The ks8851_irq() thread may call ks8851_rx_pkts() in case there are
> any packets in the MAC FIFO, which calls netif_rx(). This netif_rx()
> implementation is guarded by local_bh_disable() and local_bh_enable().
> The local_bh_enable() may call do_softirq() to run softirqs in case
> any are pending. One of the softirqs is net_rx_action, which ultimately
> reaches the driver .start_xmit callback. If that happens, the system
> hangs. The entire call chain is below:
>
> ks8851_start_xmit_par from netdev_start_xmit
> netdev_start_xmit from dev_hard_start_xmit
> dev_hard_start_xmit from sch_direct_xmit
> sch_direct_xmit from __dev_queue_xmit
> __dev_queue_xmit from __neigh_update
> __neigh_update from neigh_update
> neigh_update from arp_process.constprop.0
> arp_process.constprop.0 from __netif_receive_skb_one_core
> __netif_receive_skb_one_core from process_backlog
> process_backlog from __napi_poll.constprop.0
> __napi_poll.constprop.0 from net_rx_action
> net_rx_action from __do_softirq
> __do_softirq from call_with_stack
> call_with_stack from do_softirq
> do_softirq from __local_bh_enable_ip
> __local_bh_enable_ip from netif_rx
> netif_rx from ks8851_irq
> ks8851_irq from irq_thread_fn
> irq_thread_fn from irq_thread
> irq_thread from kthread
> kthread from ret_from_fork
>
> The hang happens because ks8851_irq() first locks a spinlock in
> ks8851_par.c ks8851_lock_par() spin_lock_irqsave(&ksp->lock, ...)
> and with that spinlock locked, calls netif_rx(). Once the execution
> reaches ks8851_start_xmit_par(), it calls ks8851_lock_par() again
> which attempts to claim the already locked spinlock again, and the
> hang happens.
>
> Move the do_softirq() call outside of the spinlock protected section
> of ks8851_irq() by disabling BHs around the entire spinlock protected
> section of ks8851_irq() handler. Place local_bh_enable() outside of
> the spinlock protected section, so that it can trigger do_softirq()
> without the ks8851_par.c ks8851_lock_par() spinlock being held, and
> safely call ks8851_start_xmit_par() without attempting to lock the
> already locked spinlock.
>
> Since ks8851_irq() is protected by local_bh_disable()/local_bh_enable()
> now, replace netif_rx() with __netif_rx() which is not duplicating the
> local_bh_disable()/local_bh_enable() calls.
>
> Fixes: 797047f875b5 ("net: ks8851: Implement Parallel bus operations")
> Signed-off-by: Marek Vasut <marex@denx.de>
> ---
> Cc: "David S. Miller" <davem@davemloft.net>
> Cc: "Uwe Kleine-König" <u.kleine-koenig@pengutronix.de>
> Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
> Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com>
> Cc: Eric Dumazet <edumazet@google.com>
> Cc: Jakub Kicinski <kuba@kernel.org>
> Cc: Mark Brown <broonie@kernel.org>
> Cc: Paolo Abeni <pabeni@redhat.com>
> Cc: Ronald Wahl <ronald.wahl@raritan.com>
> Cc: Simon Horman <horms@kernel.org>
> Cc: netdev@vger.kernel.org
> ---
>   drivers/net/ethernet/micrel/ks8851_common.c | 9 ++++++++-
>   1 file changed, 8 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/net/ethernet/micrel/ks8851_common.c b/drivers/net/ethernet/micrel/ks8851_common.c
> index 896d43bb8883d..b6b727e651f3d 100644
> --- a/drivers/net/ethernet/micrel/ks8851_common.c
> +++ b/drivers/net/ethernet/micrel/ks8851_common.c
> @@ -299,7 +299,7 @@ static void ks8851_rx_pkts(struct ks8851_net *ks)
>                                          ks8851_dbg_dumpkkt(ks, rxpkt);
>
>                                  skb->protocol = eth_type_trans(skb, ks->netdev);
> -                               netif_rx(skb);
> +                               __netif_rx(skb);
>
>                                  ks->netdev->stats.rx_packets++;
>                                  ks->netdev->stats.rx_bytes += rxlen;
> @@ -325,11 +325,15 @@ static void ks8851_rx_pkts(struct ks8851_net *ks)
>    */
>   static irqreturn_t ks8851_irq(int irq, void *_ks)
>   {
> +       bool need_bh_off = !(hardirq_count() | softirq_count());
>          struct ks8851_net *ks = _ks;
>          unsigned handled = 0;
>          unsigned long flags;
>          unsigned int status;
>
> +       if (need_bh_off)
> +               local_bh_disable();
> +
>          ks8851_lock(ks, &flags);
>
>          status = ks8851_rdreg16(ks, KS_ISR);
> @@ -406,6 +410,9 @@ static irqreturn_t ks8851_irq(int irq, void *_ks)
>          if (status & IRQ_LCI)
>                  mii_check_link(&ks->mii);
>
> +       if (need_bh_off)
> +               local_bh_enable();
> +
>          return IRQ_HANDLED;
>   }
>
> --
> 2.43.0
>


________________________________

Ce message, ainsi que tous les fichiers joints à ce message, peuvent contenir des informations sensibles et/ ou confidentielles ne devant pas être divulguées. Si vous n'êtes pas le destinataire de ce message (ou que vous recevez ce message par erreur), nous vous remercions de le notifier immédiatement à son expéditeur, et de détruire ce message. Toute copie, divulgation, modification, utilisation ou diffusion, non autorisée, directe ou indirecte, de tout ou partie de ce message, est strictement interdite.


This e-mail, and any document attached hereby, may contain confidential and/or privileged information. If you are not the intended recipient (or have received this e-mail in error) please notify the sender immediately and destroy this e-mail. Any unauthorized, direct or indirect, copying, disclosure, distribution or other use of the material or parts thereof is strictly forbidden.

Re: [PATCH 2/2] net: ks8851: Handle softirqs at the end of IRQ thread to fix hang

[Marek Vasut]

On 4/29/24 1:46 PM, Ronald Wahl wrote:
> Hi,

Hi,

> for the spi version of the chip this change now leads to
> 
> [   23.793000] BUG: sleeping function called from invalid context at 
> kernel/locking/mutex.c:283
> [   23.801915] in_atomic(): 1, irqs_disabled(): 0, non_block: 0, pid: 
> 857, name: irq/52-eth-link
> [   23.810895] preempt_count: 200, expected: 0
> [   23.815288] CPU: 0 PID: 857 Comm: irq/52-eth-link Not tainted 
> 6.6.28-sama5 #1
> [   23.822790] Hardware name: Atmel SAMA5
> [   23.826717]  unwind_backtrace from show_stack+0xb/0xc
> [   23.831992]  show_stack from dump_stack_lvl+0x19/0x1e
> [   23.837433]  dump_stack_lvl from __might_resched+0xb7/0xec
> [   23.843122]  __might_resched from mutex_lock+0xf/0x2c
> [   23.848540]  mutex_lock from ks8851_irq+0x1f/0x164
> [   23.853525]  ks8851_irq from irq_thread_fn+0xf/0x28
> [   23.858776]  irq_thread_fn from irq_thread+0x93/0x130
> [   23.864037]  irq_thread from kthread+0x7f/0x90
> [   23.868699]  kthread from ret_from_fork+0x11/0x1c
> 
> Actually the spi driver variant does not suffer from the issue as it has
> different locking so we probably should do the
> local_bh_disable/local_bh_enable only for the "par" version. What do you 
> think?

Ah sigh, sorry for the breakage. Indeed, the locking is not great here.

I am not entirely sure about the local_bh_disable/enable being par only.

I will try to prepare some sort of a patch, would you be willing to test 
it on the SPI variant ?

Re: [PATCH 2/2] net: ks8851: Handle softirqs at the end of IRQ thread to fix hang

[Ronald Wahl]

On 29.04.24 15:23, Marek Vasut wrote:
> On 4/29/24 1:46 PM, Ronald Wahl wrote:
>> Hi,
>
> Hi,
>
>> for the spi version of the chip this change now leads to
>>
>> [   23.793000] BUG: sleeping function called from invalid context at
>> kernel/locking/mutex.c:283
>> [   23.801915] in_atomic(): 1, irqs_disabled(): 0, non_block: 0, pid:
>> 857, name: irq/52-eth-link
>> [   23.810895] preempt_count: 200, expected: 0
>> [   23.815288] CPU: 0 PID: 857 Comm: irq/52-eth-link Not tainted
>> 6.6.28-sama5 #1
>> [   23.822790] Hardware name: Atmel SAMA5
>> [   23.826717]  unwind_backtrace from show_stack+0xb/0xc
>> [   23.831992]  show_stack from dump_stack_lvl+0x19/0x1e
>> [   23.837433]  dump_stack_lvl from __might_resched+0xb7/0xec
>> [   23.843122]  __might_resched from mutex_lock+0xf/0x2c
>> [   23.848540]  mutex_lock from ks8851_irq+0x1f/0x164
>> [   23.853525]  ks8851_irq from irq_thread_fn+0xf/0x28
>> [   23.858776]  irq_thread_fn from irq_thread+0x93/0x130
>> [   23.864037]  irq_thread from kthread+0x7f/0x90
>> [   23.868699]  kthread from ret_from_fork+0x11/0x1c
>>
>> Actually the spi driver variant does not suffer from the issue as it has
>> different locking so we probably should do the
>> local_bh_disable/local_bh_enable only for the "par" version. What do
>> you think?
>
> Ah sigh, sorry for the breakage. Indeed, the locking is not great here.
>
> I am not entirely sure about the local_bh_disable/enable being par only.
>
> I will try to prepare some sort of a patch, would you be willing to test
> it on the SPI variant ?

Yes, I can help here, thanks. Meanwhile I also have some good understanding
at least on the TX path because we had some issues here in the past.

I will come up myself with another fix in the interrupt handler later. We
currently reset the ISR status flags too late risking a TX queue stall with
the SPI chip variant. They must be reset immediately after reading them.
Need
to wait a bit for field feedback as I was not able to reproduce this
mysqelf.

- ron


________________________________

Ce message, ainsi que tous les fichiers joints à ce message, peuvent contenir des informations sensibles et/ ou confidentielles ne devant pas être divulguées. Si vous n'êtes pas le destinataire de ce message (ou que vous recevez ce message par erreur), nous vous remercions de le notifier immédiatement à son expéditeur, et de détruire ce message. Toute copie, divulgation, modification, utilisation ou diffusion, non autorisée, directe ou indirecte, de tout ou partie de ce message, est strictement interdite.


This e-mail, and any document attached hereby, may contain confidential and/or privileged information. If you are not the intended recipient (or have received this e-mail in error) please notify the sender immediately and destroy this e-mail. Any unauthorized, direct or indirect, copying, disclosure, distribution or other use of the material or parts thereof is strictly forbidden.

Re: [PATCH 2/2] net: ks8851: Handle softirqs at the end of IRQ thread to fix hang

[Marek Vasut]

On 4/29/24 3:50 PM, Ronald Wahl wrote:
> On 29.04.24 15:23, Marek Vasut wrote:
>> On 4/29/24 1:46 PM, Ronald Wahl wrote:
>>> Hi,
>>
>> Hi,
>>
>>> for the spi version of the chip this change now leads to
>>>
>>> [   23.793000] BUG: sleeping function called from invalid context at
>>> kernel/locking/mutex.c:283
>>> [   23.801915] in_atomic(): 1, irqs_disabled(): 0, non_block: 0, pid:
>>> 857, name: irq/52-eth-link
>>> [   23.810895] preempt_count: 200, expected: 0
>>> [   23.815288] CPU: 0 PID: 857 Comm: irq/52-eth-link Not tainted
>>> 6.6.28-sama5 #1
>>> [   23.822790] Hardware name: Atmel SAMA5
>>> [   23.826717]  unwind_backtrace from show_stack+0xb/0xc
>>> [   23.831992]  show_stack from dump_stack_lvl+0x19/0x1e
>>> [   23.837433]  dump_stack_lvl from __might_resched+0xb7/0xec
>>> [   23.843122]  __might_resched from mutex_lock+0xf/0x2c
>>> [   23.848540]  mutex_lock from ks8851_irq+0x1f/0x164
>>> [   23.853525]  ks8851_irq from irq_thread_fn+0xf/0x28
>>> [   23.858776]  irq_thread_fn from irq_thread+0x93/0x130
>>> [   23.864037]  irq_thread from kthread+0x7f/0x90
>>> [   23.868699]  kthread from ret_from_fork+0x11/0x1c
>>>
>>> Actually the spi driver variant does not suffer from the issue as it has
>>> different locking so we probably should do the
>>> local_bh_disable/local_bh_enable only for the "par" version. What do
>>> you think?
>>
>> Ah sigh, sorry for the breakage. Indeed, the locking is not great here.
>>
>> I am not entirely sure about the local_bh_disable/enable being par only.
>>
>> I will try to prepare some sort of a patch, would you be willing to test
>> it on the SPI variant ?
> 
> Yes, I can help here, thanks. Meanwhile I also have some good understanding
> at least on the TX path because we had some issues here in the past.
> 
> I will come up myself with another fix in the interrupt handler later. We
> currently reset the ISR status flags too late risking a TX queue stall with
> the SPI chip variant. They must be reset immediately after reading them.
> Need
> to wait a bit for field feedback as I was not able to reproduce this
> mysqelf.

This chip really is a gift that keeps on giving ... sigh.

I just sent this patch, you are on CC, please give it a try:

https://patchwork.kernel.org/project/netdevbpf/patch/20240430011518.110416-1-marex@denx.de/