From: Eric Dumazet <edumazet@google.com>
To: "David S . Miller" <davem@davemloft.net>,
Jakub Kicinski <kuba@kernel.org>,
Paolo Abeni <pabeni@redhat.com>
Cc: netdev@vger.kernel.org, eric.dumazet@gmail.com,
Eric Dumazet <edumazet@google.com>,
syzbot+9ee20ec1de7b3168db09@syzkaller.appspotmail.com,
Phillip Potter <phil@philpotter.co.uk>,
Sabrina Dubroca <sd@queasysnail.net>
Subject: [PATCH v2 net] geneve: fix header validation in geneve[6]_xmit_skb
Date: Wed, 3 Apr 2024 15:30:17 +0000 [thread overview]
Message-ID: <20240403153017.426490-1-edumazet@google.com> (raw)
syzbot is able to trigger an uninit-value in geneve_xmit() [1]
Problem : While most ip tunnel helpers (like ip_tunnel_get_dsfield())
uses skb_protocol(skb, true), pskb_inet_may_pull() is only using
skb->protocol.
If anything else than ETH_P_IPV6 or ETH_P_IP is found in skb->protocol,
pskb_inet_may_pull() does nothing at all.
If a vlan tag was provided by the caller (af_packet in the syzbot case),
the network header might not point to the correct location, and skb
linear part could be smaller than expected.
Add skb_vlan_inet_prepare() to perform a complete mac validation.
Use this in geneve for the moment, I suspect we need to adopt this
more broadly.
v2 - Addressed Sabrina comments on v1
Link: https://lore.kernel.org/netdev/Zg1l9L2BNoZWZDZG@hog/
[1]
BUG: KMSAN: uninit-value in geneve_xmit_skb drivers/net/geneve.c:910 [inline]
BUG: KMSAN: uninit-value in geneve_xmit+0x302d/0x5420 drivers/net/geneve.c:1030
geneve_xmit_skb drivers/net/geneve.c:910 [inline]
geneve_xmit+0x302d/0x5420 drivers/net/geneve.c:1030
__netdev_start_xmit include/linux/netdevice.h:4903 [inline]
netdev_start_xmit include/linux/netdevice.h:4917 [inline]
xmit_one net/core/dev.c:3531 [inline]
dev_hard_start_xmit+0x247/0xa20 net/core/dev.c:3547
__dev_queue_xmit+0x348d/0x52c0 net/core/dev.c:4335
dev_queue_xmit include/linux/netdevice.h:3091 [inline]
packet_xmit+0x9c/0x6c0 net/packet/af_packet.c:276
packet_snd net/packet/af_packet.c:3081 [inline]
packet_sendmsg+0x8bb0/0x9ef0 net/packet/af_packet.c:3113
sock_sendmsg_nosec net/socket.c:730 [inline]
__sock_sendmsg+0x30f/0x380 net/socket.c:745
__sys_sendto+0x685/0x830 net/socket.c:2191
__do_sys_sendto net/socket.c:2203 [inline]
__se_sys_sendto net/socket.c:2199 [inline]
__x64_sys_sendto+0x125/0x1d0 net/socket.c:2199
do_syscall_64+0xd5/0x1f0
entry_SYSCALL_64_after_hwframe+0x6d/0x75
Uninit was created at:
slab_post_alloc_hook mm/slub.c:3804 [inline]
slab_alloc_node mm/slub.c:3845 [inline]
kmem_cache_alloc_node+0x613/0xc50 mm/slub.c:3888
kmalloc_reserve+0x13d/0x4a0 net/core/skbuff.c:577
__alloc_skb+0x35b/0x7a0 net/core/skbuff.c:668
alloc_skb include/linux/skbuff.h:1318 [inline]
alloc_skb_with_frags+0xc8/0xbf0 net/core/skbuff.c:6504
sock_alloc_send_pskb+0xa81/0xbf0 net/core/sock.c:2795
packet_alloc_skb net/packet/af_packet.c:2930 [inline]
packet_snd net/packet/af_packet.c:3024 [inline]
packet_sendmsg+0x722d/0x9ef0 net/packet/af_packet.c:3113
sock_sendmsg_nosec net/socket.c:730 [inline]
__sock_sendmsg+0x30f/0x380 net/socket.c:745
__sys_sendto+0x685/0x830 net/socket.c:2191
__do_sys_sendto net/socket.c:2203 [inline]
__se_sys_sendto net/socket.c:2199 [inline]
__x64_sys_sendto+0x125/0x1d0 net/socket.c:2199
do_syscall_64+0xd5/0x1f0
entry_SYSCALL_64_after_hwframe+0x6d/0x75
CPU: 0 PID: 5033 Comm: syz-executor346 Not tainted 6.9.0-rc1-syzkaller-00005-g928a87efa423 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 02/29/2024
Fixes: d13f048dd40e ("net: geneve: modify IP header check in geneve6_xmit_skb and geneve_xmit_skb")
Reported-by: syzbot+9ee20ec1de7b3168db09@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/netdev/000000000000d19c3a06152f9ee4@google.com/
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Phillip Potter <phil@philpotter.co.uk>
Cc: Sabrina Dubroca <sd@queasysnail.net>
---
drivers/net/geneve.c | 4 ++--
include/net/ip_tunnels.h | 35 +++++++++++++++++++++++++++++++++++
2 files changed, 37 insertions(+), 2 deletions(-)
diff --git a/drivers/net/geneve.c b/drivers/net/geneve.c
index 2f6739fe78af2e8e90c0a3b474c2e99c83e02994..6c2835086b57eacbcddb44a3c507e26d5a944427 100644
--- a/drivers/net/geneve.c
+++ b/drivers/net/geneve.c
@@ -822,7 +822,7 @@ static int geneve_xmit_skb(struct sk_buff *skb, struct net_device *dev,
__be16 sport;
int err;
- if (!pskb_inet_may_pull(skb))
+ if (!skb_vlan_inet_prepare(skb))
return -EINVAL;
if (!gs4)
@@ -929,7 +929,7 @@ static int geneve6_xmit_skb(struct sk_buff *skb, struct net_device *dev,
__be16 sport;
int err;
- if (!pskb_inet_may_pull(skb))
+ if (!skb_vlan_inet_prepare(skb))
return -EINVAL;
if (!gs6)
diff --git a/include/net/ip_tunnels.h b/include/net/ip_tunnels.h
index 5cd64bb2104df389250fb3c518ba00a3826c53f7..54c87eab769e8b8e7c9f98a9c21c7e922d1ca3c6 100644
--- a/include/net/ip_tunnels.h
+++ b/include/net/ip_tunnels.h
@@ -361,6 +361,41 @@ static inline bool pskb_inet_may_pull(struct sk_buff *skb)
return pskb_network_may_pull(skb, nhlen);
}
+/* Variant of pskb_inet_may_pull().
+ */
+static inline bool skb_vlan_inet_prepare(struct sk_buff *skb)
+{
+ int nhlen, maclen;
+ __be16 type;
+
+ /* Essentially this is skb_protocol(skb, true)
+ * And we get MAC len.
+ */
+ type = __vlan_get_protocol(skb, skb->protocol, &maclen);
+
+ switch (type) {
+#if IS_ENABLED(CONFIG_IPV6)
+ case htons(ETH_P_IPV6):
+ nhlen = sizeof(struct ipv6hdr);
+ break;
+#endif
+ case htons(ETH_P_IP):
+ nhlen = sizeof(struct iphdr);
+ break;
+
+ default:
+ nhlen = 0;
+ }
+ /* For ETH_P_IPV6/ETH_P_IP we make sure to pull
+ * a base network header in skb->head.
+ */
+ if (pskb_may_pull(skb, maclen + nhlen))
+ return false;
+
+ skb_set_network_header(skb, maclen);
+ return true;
+}
+
static inline int ip_encap_hlen(struct ip_tunnel_encap *e)
{
const struct ip_tunnel_encap_ops *ops;
--
2.44.0.478.gd926399ef9-goog
next reply other threads:[~2024-04-03 15:30 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-04-03 15:30 Eric Dumazet [this message]
2024-04-03 16:21 ` [PATCH v2 net] geneve: fix header validation in geneve[6]_xmit_skb Sabrina Dubroca
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20240403153017.426490-1-edumazet@google.com \
--to=edumazet@google.com \
--cc=davem@davemloft.net \
--cc=eric.dumazet@gmail.com \
--cc=kuba@kernel.org \
--cc=netdev@vger.kernel.org \
--cc=pabeni@redhat.com \
--cc=phil@philpotter.co.uk \
--cc=sd@queasysnail.net \
--cc=syzbot+9ee20ec1de7b3168db09@syzkaller.appspotmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).