Re: [PATCH net-next v11 00/13] Introduce PHY listing and link_topology tracking

[Maxime Chevallier <maxime.chevallier@bootlin.com>]

Hi,

On Sat, 06 Apr 2024 17:30:29 +0000
patchwork-bot+netdevbpf@kernel.org wrote:

> Hello:
> 
> This series was applied to netdev/net-next.git (main)
> by David S. Miller <davem@davemloft.net>:
> 
> On Thu,  4 Apr 2024 11:29:50 +0200 you wrote:
> > Hello everyone,
> > 
> > This is V11 for the link topology addition, allowing to track all PHYs
> > that are linked to netdevices.
> > 
> > This V11 addresses the various netlink-related issues that were raised
> > by Jakub, and fixes some typos in the documentation.
> > 
> > [...]  
> 
> Here is the summary with links:
>   - [net-next,v11,01/13] net: phy: Introduce ethernet link topology representation
>     https://git.kernel.org/netdev/net-next/c/6916e461e793
>   - [net-next,v11,02/13] net: sfp: pass the phy_device when disconnecting an sfp module's PHY
>     https://git.kernel.org/netdev/net-next/c/0ec5ed6c130e
>   - [net-next,v11,03/13] net: phy: add helpers to handle sfp phy connect/disconnect
>     https://git.kernel.org/netdev/net-next/c/e75e4e074c44
>   - [net-next,v11,04/13] net: sfp: Add helper to return the SFP bus name
>     https://git.kernel.org/netdev/net-next/c/fdd353965b52
>   - [net-next,v11,05/13] net: ethtool: Allow passing a phy index for some commands
>     https://git.kernel.org/netdev/net-next/c/841942bc6212
>   - [net-next,v11,06/13] netlink: specs: add phy-index as a header parameter
>     (no matching commit)
>   - [net-next,v11,07/13] net: ethtool: Introduce a command to list PHYs on an interface
>     (no matching commit)
>   - [net-next,v11,08/13] netlink: specs: add ethnl PHY_GET command set
>     (no matching commit)
>   - [net-next,v11,09/13] net: ethtool: plca: Target the command to the requested PHY
>     (no matching commit)
>   - [net-next,v11,10/13] net: ethtool: pse-pd: Target the command to the requested PHY
>     (no matching commit)
>   - [net-next,v11,11/13] net: ethtool: cable-test: Target the command to the requested PHY
>     (no matching commit)
>   - [net-next,v11,12/13] net: ethtool: strset: Allow querying phy stats by index
>     (no matching commit)
>   - [net-next,v11,13/13] Documentation: networking: document phy_link_topology
>     (no matching commit)

It looks like commits 6 to 13 didn't make it upstream with (the "no
matching commit" messages above). Is that expected ?

Thanks,

Maxime