[PATCH net-next v2 0/5] net: stmmac: Add support for RZN1 GMAC devices

[PATCH net-next v2 0/5] net: stmmac: Add support for RZN1 GMAC devices

[Romain Gantois]

Hello everyone,

This is version two of my series that adds support for a Gigabit Ethernet
controller featured in the Renesas r9a06g032 SoC, of the RZ/N1 family. This
GMAC device is based on a Synopsys IP and is compatible with the stmmac driver.

My former colleague Clément Léger originally sent a series for this driver,
but an issue in bringing up the PCS clock had blocked the upstreaming
process. This issue has since been resolved by the following series:

https://lore.kernel.org/all/20240326-rxc_bugfix-v6-0-24a74e5c761f@bootlin.com/

This series consists of a devicetree binding describing the RZN1 GMAC
controller IP, a node for the GMAC1 device in the r9a06g032 SoC device
tree, and the GMAC driver itself which is a glue layer in stmmac.

There are also two patches by Russell that improve pcs initialization handling
in stmmac.

Best Regards,

Romain Gantois

---
Changes in v2:
- Add pcs_init/exit callbacks in stmmac to solve race condition
- Use pcs_init/exit callbacks in dwmac_socfpga glue layer
- Miscellaneous device tree binding corrections
- Link to v1: https://lore.kernel.org/r/20240402-rzn1-gmac1-v1-0-5be2b2894d8c@bootlin.com

---
Clément Léger (3):
      dt-bindings: net: renesas,rzn1-gmac: Document RZ/N1 GMAC support
      net: stmmac: add support for RZ/N1 GMAC
      ARM: dts: r9a06g032: describe GMAC1

Russell King (Oracle) (2):
      net: stmmac: introduce pcs_init/pcs_exit stmmac operations
      net: stmmac: dwmac-socfpga: use pcs_init/pcs_exit

 .../devicetree/bindings/net/renesas,rzn1-gmac.yaml |  66 +++++++++++++
 MAINTAINERS                                        |   6 ++
 arch/arm/boot/dts/renesas/r9a06g032.dtsi           |  19 ++++
 drivers/net/ethernet/stmicro/stmmac/Kconfig        |  12 +++
 drivers/net/ethernet/stmicro/stmmac/Makefile       |   1 +
 drivers/net/ethernet/stmicro/stmmac/dwmac-rzn1.c   |  88 +++++++++++++++++
 .../net/ethernet/stmicro/stmmac/dwmac-socfpga.c    | 109 +++++++++++----------
 drivers/net/ethernet/stmicro/stmmac/stmmac_main.c  |  14 +++
 include/linux/stmmac.h                             |   2 +
 9 files changed, 263 insertions(+), 54 deletions(-)
---
base-commit: 87c33315af380ca12a2e59ac94edad4fe0481b4c
change-id: 20240402-rzn1-gmac1-685cf8793d0e

Best regards,
-- 
Romain Gantois <romain.gantois@bootlin.com>

[PATCH net-next v2 1/5] dt-bindings: net: renesas,rzn1-gmac: Document RZ/N1 GMAC support

[Romain Gantois]

From: Clément Léger <clement.leger@bootlin.com>

The RZ/N1 series of MPUs feature up to two Gigabit Ethernet controllers.
These controllers are based on Synopsys IPs. They can be connected to
RZ/N1 RGMII/RMII converters.

Add a binding that describes these GMAC devices.

Signed-off-by: "Clément Léger" <clement.leger@bootlin.com>
[rgantois: commit log]
Signed-off-by: Romain Gantois <romain.gantois@bootlin.com>
---
 .../devicetree/bindings/net/renesas,rzn1-gmac.yaml | 66 ++++++++++++++++++++++
 1 file changed, 66 insertions(+)

diff --git a/Documentation/devicetree/bindings/net/renesas,rzn1-gmac.yaml b/Documentation/devicetree/bindings/net/renesas,rzn1-gmac.yaml
new file mode 100644
index 000000000000..d9a8d586e260
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/renesas,rzn1-gmac.yaml
@@ -0,0 +1,66 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/renesas,rzn1-gmac.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Renesas GMAC
+
+maintainers:
+  - Romain Gantois <romain.gantois@bootlin.com>
+
+select:
+  properties:
+    compatible:
+      contains:
+        enum:
+          - renesas,r9a06g032-gmac
+          - renesas,rzn1-gmac
+  required:
+    - compatible
+
+allOf:
+  - $ref: snps,dwmac.yaml#
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - renesas,r9a06g032-gmac
+      - const: renesas,rzn1-gmac
+      - const: snps,dwmac
+
+  pcs-handle:
+    description:
+      phandle pointing to a PCS sub-node compatible with
+      renesas,rzn1-miic.yaml#
+
+required:
+  - compatible
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/r9a06g032-sysctrl.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    ethernet@44000000 {
+      compatible = "renesas,r9a06g032-gmac", "renesas,rzn1-gmac", "snps,dwmac";
+      reg = <0x44000000 0x2000>;
+      interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>,
+                   <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>,
+                   <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
+      interrupt-names = "macirq", "eth_wake_irq", "eth_lpi";
+      clock-names = "stmmaceth";
+      clocks = <&sysctrl R9A06G032_HCLK_GMAC0>;
+      power-domains = <&sysctrl>;
+      snps,multicast-filter-bins = <256>;
+      snps,perfect-filter-entries = <128>;
+      tx-fifo-depth = <2048>;
+      rx-fifo-depth = <4096>;
+      pcs-handle = <&mii_conv1>;
+      phy-mode = "mii";
+    };
+
+...

-- 
2.44.0

Re: [PATCH net-next v2 1/5] dt-bindings: net: renesas,rzn1-gmac: Document RZ/N1 GMAC support

[Rob Herring]

On Tue, 09 Apr 2024 11:21:44 +0200, Romain Gantois wrote:
> From: Clément Léger <clement.leger@bootlin.com>
> 
> The RZ/N1 series of MPUs feature up to two Gigabit Ethernet controllers.
> These controllers are based on Synopsys IPs. They can be connected to
> RZ/N1 RGMII/RMII converters.
> 
> Add a binding that describes these GMAC devices.
> 
> Signed-off-by: "Clément Léger" <clement.leger@bootlin.com>
> [rgantois: commit log]
> Signed-off-by: Romain Gantois <romain.gantois@bootlin.com>
> ---
>  .../devicetree/bindings/net/renesas,rzn1-gmac.yaml | 66 ++++++++++++++++++++++
>  1 file changed, 66 insertions(+)
> 

Reviewed-by: Rob Herring <robh@kernel.org>

[PATCH net-next v2 2/5] net: stmmac: introduce pcs_init/pcs_exit stmmac operations

[Romain Gantois]

From: "Russell King (Oracle)" <rmk+kernel@armlinux.org.uk>

Introduce a mechanism whereby platforms can create their PCS instances
prior to the network device being published to userspace, but after
some of the core stmmac initialisation has been completed. This means
that the data structures that platforms need will be available.

Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Signed-off-by: Romain Gantois <romain.gantois@bootlin.com>
---
 drivers/net/ethernet/stmicro/stmmac/stmmac_main.c | 14 ++++++++++++++
 include/linux/stmmac.h                            |  2 ++
 2 files changed, 16 insertions(+)

diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
index fe3498e86de9..25fa33ae7017 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
@@ -7208,6 +7208,12 @@ static int stmmac_hw_init(struct stmmac_priv *priv)
 	if (ret)
 		return ret;
 
+	if (priv->plat->pcs_init) {
+		ret = priv->plat->pcs_init(priv, priv->hw);
+		if (ret)
+			return ret;
+	}
+
 	/* Get the HW capability (new GMAC newer than 3.50a) */
 	priv->hw_cap_support = stmmac_get_hw_features(priv);
 	if (priv->hw_cap_support) {
@@ -7290,6 +7296,12 @@ static int stmmac_hw_init(struct stmmac_priv *priv)
 	return 0;
 }
 
+static void stmmac_hw_exit(struct stmmac_priv *priv)
+{
+	if (priv->plat->pcs_exit)
+		priv->plat->pcs_exit(priv, priv->hw);
+}
+
 static void stmmac_napi_add(struct net_device *dev)
 {
 	struct stmmac_priv *priv = netdev_priv(dev);
@@ -7804,6 +7816,7 @@ int stmmac_dvr_probe(struct device *device,
 	    priv->hw->pcs != STMMAC_PCS_RTBI)
 		stmmac_mdio_unregister(ndev);
 error_mdio_register:
+	stmmac_hw_exit(priv);
 	stmmac_napi_del(ndev);
 error_hw_init:
 	destroy_workqueue(priv->wq);
@@ -7844,6 +7857,7 @@ void stmmac_dvr_remove(struct device *dev)
 	if (priv->hw->pcs != STMMAC_PCS_TBI &&
 	    priv->hw->pcs != STMMAC_PCS_RTBI)
 		stmmac_mdio_unregister(ndev);
+	stmmac_hw_exit(priv);
 	destroy_workqueue(priv->wq);
 	mutex_destroy(&priv->lock);
 	bitmap_free(priv->af_xdp_zc_qps);
diff --git a/include/linux/stmmac.h b/include/linux/stmmac.h
index dfa1828cd756..941fde506e51 100644
--- a/include/linux/stmmac.h
+++ b/include/linux/stmmac.h
@@ -285,6 +285,8 @@ struct plat_stmmacenet_data {
 	int (*crosststamp)(ktime_t *device, struct system_counterval_t *system,
 			   void *ctx);
 	void (*dump_debug_regs)(void *priv);
+	int (*pcs_init)(struct stmmac_priv *priv, struct mac_device_info *hw);
+	void (*pcs_exit)(struct stmmac_priv *priv, struct mac_device_info *hw);
 	void *bsp_priv;
 	struct clk *stmmac_clk;
 	struct clk *pclk;

-- 
2.44.0

[PATCH net-next v2 3/5] net: stmmac: dwmac-socfpga: use pcs_init/pcs_exit

[Romain Gantois]

From: "Russell King (Oracle)" <rmk+kernel@armlinux.org.uk>

Use the newly introduced pcs_init() and pcs_exit() operations to
create and destroy the PCS instance at a more appropriate moment during
the driver lifecycle, thereby avoiding publishing a network device to
userspace that has not yet finished its PCS initialisation.

There are other similar issues with this driver which remain
unaddressed, but these are out of scope for this patch.

Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Signed-off-by: Romain Gantois <romain.gantois@bootlin.com>
---
 .../net/ethernet/stmicro/stmmac/dwmac-socfpga.c    | 109 +++++++++++----------
 1 file changed, 55 insertions(+), 54 deletions(-)

diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-socfpga.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-socfpga.c
index 12b4a80ea3aa..67ca163936c8 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac-socfpga.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-socfpga.c
@@ -379,6 +379,58 @@ static int socfpga_gen10_set_phy_mode(struct socfpga_dwmac *dwmac)
 	return 0;
 }
 
+static int socfpga_dwmac_pcs_init(struct stmmac_priv *priv,
+				  struct mac_device_info *hw)
+{
+	struct socfpga_dwmac *dwmac = priv->plat->bsp_priv;
+	struct regmap_config pcs_regmap_cfg = {
+		.reg_bits = 16,
+		.val_bits = 16,
+		.reg_shift = regmap_upshift(1),
+	};
+	struct mdio_regmap_config mrc;
+	struct regmap *pcs_regmap;
+	struct phylink_pcs *pcs;
+	struct mii_bus *pcs_bus;
+
+	if (!dwmac->tse_pcs_base)
+		return 0;
+
+	pcs_regmap = devm_regmap_init_mmio(priv->device, dwmac->tse_pcs_base,
+					   &pcs_regmap_cfg);
+	if (IS_ERR(pcs_regmap))
+		return PTR_ERR(pcs_regmap);
+
+	memset(&mrc, 0, sizeof(mrc));
+	mrc.regmap = pcs_regmap;
+	mrc.parent = priv->device;
+	mrc.valid_addr = 0x0;
+	mrc.autoscan = false;
+
+	/* Can't use ndev->name here because it will not have been initialised,
+	 * and in any case, the user can rename network interfaces at runtime.
+	 */
+	snprintf(mrc.name, MII_BUS_ID_SIZE, "%s-pcs-mii",
+		 dev_name(priv->device));
+	pcs_bus = devm_mdio_regmap_register(priv->device, &mrc);
+	if (IS_ERR(pcs_bus))
+		return PTR_ERR(pcs_bus);
+
+	pcs = lynx_pcs_create_mdiodev(pcs_bus, 0);
+	if (IS_ERR(pcs))
+		return PTR_ERR(pcs);
+
+	hw->phylink_pcs = pcs;
+	return 0;
+}
+
+static void socfpga_dwmac_pcs_exit(struct stmmac_priv *priv,
+				   struct mac_device_info *hw)
+{
+	if (hw->phylink_pcs)
+		lynx_pcs_destroy(hw->phylink_pcs);
+}
+
 static int socfpga_dwmac_probe(struct platform_device *pdev)
 {
 	struct plat_stmmacenet_data *plat_dat;
@@ -426,6 +478,8 @@ static int socfpga_dwmac_probe(struct platform_device *pdev)
 	dwmac->ops = ops;
 	plat_dat->bsp_priv = dwmac;
 	plat_dat->fix_mac_speed = socfpga_dwmac_fix_mac_speed;
+	plat_dat->pcs_init = socfpga_dwmac_pcs_init;
+	plat_dat->pcs_exit = socfpga_dwmac_pcs_exit;
 
 	ret = stmmac_dvr_probe(&pdev->dev, plat_dat, &stmmac_res);
 	if (ret)
@@ -444,48 +498,6 @@ static int socfpga_dwmac_probe(struct platform_device *pdev)
 	if (ret)
 		goto err_dvr_remove;
 
-	/* Create a regmap for the PCS so that it can be used by the PCS driver,
-	 * if we have such a PCS
-	 */
-	if (dwmac->tse_pcs_base) {
-		struct regmap_config pcs_regmap_cfg;
-		struct mdio_regmap_config mrc;
-		struct regmap *pcs_regmap;
-		struct mii_bus *pcs_bus;
-
-		memset(&pcs_regmap_cfg, 0, sizeof(pcs_regmap_cfg));
-		memset(&mrc, 0, sizeof(mrc));
-
-		pcs_regmap_cfg.reg_bits = 16;
-		pcs_regmap_cfg.val_bits = 16;
-		pcs_regmap_cfg.reg_shift = REGMAP_UPSHIFT(1);
-
-		pcs_regmap = devm_regmap_init_mmio(&pdev->dev, dwmac->tse_pcs_base,
-						   &pcs_regmap_cfg);
-		if (IS_ERR(pcs_regmap)) {
-			ret = PTR_ERR(pcs_regmap);
-			goto err_dvr_remove;
-		}
-
-		mrc.regmap = pcs_regmap;
-		mrc.parent = &pdev->dev;
-		mrc.valid_addr = 0x0;
-		mrc.autoscan = false;
-
-		snprintf(mrc.name, MII_BUS_ID_SIZE, "%s-pcs-mii", ndev->name);
-		pcs_bus = devm_mdio_regmap_register(&pdev->dev, &mrc);
-		if (IS_ERR(pcs_bus)) {
-			ret = PTR_ERR(pcs_bus);
-			goto err_dvr_remove;
-		}
-
-		stpriv->hw->phylink_pcs = lynx_pcs_create_mdiodev(pcs_bus, 0);
-		if (IS_ERR(stpriv->hw->phylink_pcs)) {
-			ret = PTR_ERR(stpriv->hw->phylink_pcs);
-			goto err_dvr_remove;
-		}
-	}
-
 	return 0;
 
 err_dvr_remove:
@@ -494,17 +506,6 @@ static int socfpga_dwmac_probe(struct platform_device *pdev)
 	return ret;
 }
 
-static void socfpga_dwmac_remove(struct platform_device *pdev)
-{
-	struct net_device *ndev = platform_get_drvdata(pdev);
-	struct stmmac_priv *priv = netdev_priv(ndev);
-	struct phylink_pcs *pcs = priv->hw->phylink_pcs;
-
-	stmmac_pltfr_remove(pdev);
-
-	lynx_pcs_destroy(pcs);
-}
-
 #ifdef CONFIG_PM_SLEEP
 static int socfpga_dwmac_resume(struct device *dev)
 {
@@ -576,7 +577,7 @@ MODULE_DEVICE_TABLE(of, socfpga_dwmac_match);
 
 static struct platform_driver socfpga_dwmac_driver = {
 	.probe  = socfpga_dwmac_probe,
-	.remove_new = socfpga_dwmac_remove,
+	.remove_new = stmmac_pltfr_remove,
 	.driver = {
 		.name           = "socfpga-dwmac",
 		.pm		= &socfpga_dwmac_pm_ops,

-- 
2.44.0

Re: [PATCH net-next v2 3/5] net: stmmac: dwmac-socfpga: use pcs_init/pcs_exit

[Jakub Kicinski]

On Tue, 09 Apr 2024 11:21:46 +0200 Romain Gantois wrote:
> +	struct regmap_config pcs_regmap_cfg = {
> +		.reg_bits = 16,
> +		.val_bits = 16,
> +		.reg_shift = regmap_upshift(1),

This appears to displease the compiler:

drivers/net/ethernet/stmicro/stmmac/dwmac-socfpga.c:389:16: error: call to undeclared function 'regmap_upshift'; ISO C99 and later do not support implicit function declarations [-Wimplicit-function-declaration]
  389 |                 .reg_shift = regmap_upshift(1),
      |                              ^
-- 
pw-bot: cr

Re: [PATCH net-next v2 3/5] net: stmmac: dwmac-socfpga: use pcs_init/pcs_exit

[Russell King (Oracle)]

On Tue, Apr 09, 2024 at 06:34:04PM -0700, Jakub Kicinski wrote:
> On Tue, 09 Apr 2024 11:21:46 +0200 Romain Gantois wrote:
> > +	struct regmap_config pcs_regmap_cfg = {
> > +		.reg_bits = 16,
> > +		.val_bits = 16,
> > +		.reg_shift = regmap_upshift(1),
> 
> This appears to displease the compiler:
> 
> drivers/net/ethernet/stmicro/stmmac/dwmac-socfpga.c:389:16: error: call to undeclared function 'regmap_upshift'; ISO C99 and later do not support implicit function declarations [-Wimplicit-function-declaration]
>   389 |                 .reg_shift = regmap_upshift(1),
>       |                              ^

Yes, annoyingly I accidentally it 'u' instead of 'y' in vi which
lower-cased the entire function, and didn't realise before sending the
patch as a theoretical solution to Romain. After build-testing it locally
I did notice it. I would've thought that Romain would've build-tested
before sending out his patch set and would've fixed it up... I didn't
have time to properly fix up my patch (essentially would've ment
redoing the edits from scratch to ensure that it was correct.) Still
don't have time to do that. Sorry.

-- 
RMK's Patch system: https://www.armlinux.org.uk/developer/patches/
FTTP is here! 80Mbps down 10Mbps up. Decent connectivity at last!

Re: [PATCH net-next v2 3/5] net: stmmac: dwmac-socfpga: use pcs_init/pcs_exit

[Romain Gantois]

Hello Russell,

On Wed, 10 Apr 2024, Russell King (Oracle) wrote:

> patch as a theoretical solution to Romain. After build-testing it locally
> I did notice it. I would've thought that Romain would've build-tested
> before sending out his patch set and would've fixed it up... I didn't
> have time to properly fix up my patch (essentially would've ment

I build-tested the patches but didn't realize that CONFIG_DWMAC_SOCFPGA was not 
enabled in my configuration. So that's my bad, sorry.

Best Regards,

-- 
Romain Gantois, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com

[PATCH net-next v2 4/5] net: stmmac: add support for RZ/N1 GMAC

[Romain Gantois]

From: Clément Léger <clement.leger@bootlin.com>

Add support for the Renesas RZ/N1 GMAC. This support can make use of a
custom RZ/N1 PCS which is fetched by parsing the pcs-handle device tree
property.

Signed-off-by: "Clément Léger" <clement.leger@bootlin.com>
Co-developed-by: Romain Gantois <romain.gantois@bootlin.com>
Signed-off-by: Romain Gantois <romain.gantois@bootlin.com>
---
 MAINTAINERS                                      |  6 ++
 drivers/net/ethernet/stmicro/stmmac/Kconfig      | 12 ++++
 drivers/net/ethernet/stmicro/stmmac/Makefile     |  1 +
 drivers/net/ethernet/stmicro/stmmac/dwmac-rzn1.c | 88 ++++++++++++++++++++++++
 4 files changed, 107 insertions(+)

diff --git a/MAINTAINERS b/MAINTAINERS
index 4745ea94d463..40bd3eb355fd 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -18848,6 +18848,12 @@ F:	include/dt-bindings/net/pcs-rzn1-miic.h
 F:	include/linux/pcs-rzn1-miic.h
 F:	net/dsa/tag_rzn1_a5psw.c
 
+RENESAS RZ/N1 DWMAC GLUE LAYER
+M:	Romain Gantois <romain.gantois@bootlin.com>
+S:	Maintained
+F:	Documentation/devicetree/bindings/net/renesas,rzn1-gmac.yaml
+F:	drivers/net/ethernet/stmicro/stmmac/dwmac-rzn1.c
+
 RENESAS RZ/N1 RTC CONTROLLER DRIVER
 M:	Miquel Raynal <miquel.raynal@bootlin.com>
 L:	linux-rtc@vger.kernel.org
diff --git a/drivers/net/ethernet/stmicro/stmmac/Kconfig b/drivers/net/ethernet/stmicro/stmmac/Kconfig
index 4ec61f1ee71a..05cc07b8f48c 100644
--- a/drivers/net/ethernet/stmicro/stmmac/Kconfig
+++ b/drivers/net/ethernet/stmicro/stmmac/Kconfig
@@ -142,6 +142,18 @@ config DWMAC_ROCKCHIP
 	  This selects the Rockchip RK3288 SoC glue layer support for
 	  the stmmac device driver.
 
+config DWMAC_RZN1
+	tristate "Renesas RZ/N1 dwmac support"
+	default ARCH_RZN1
+	depends on OF && (ARCH_RZN1 || COMPILE_TEST)
+	select PCS_RZN1_MIIC
+	help
+	  Support for Ethernet controller on Renesas RZ/N1 SoC family.
+
+	  This selects the Renesas RZ/N1 SoC glue layer support for
+	  the stmmac device driver. This support can make use of a custom MII
+	  converter PCS device.
+
 config DWMAC_SOCFPGA
 	tristate "SOCFPGA dwmac support"
 	default ARCH_INTEL_SOCFPGA
diff --git a/drivers/net/ethernet/stmicro/stmmac/Makefile b/drivers/net/ethernet/stmicro/stmmac/Makefile
index 26cad4344701..c2f0e91f6bf8 100644
--- a/drivers/net/ethernet/stmicro/stmmac/Makefile
+++ b/drivers/net/ethernet/stmicro/stmmac/Makefile
@@ -21,6 +21,7 @@ obj-$(CONFIG_DWMAC_MEDIATEK)	+= dwmac-mediatek.o
 obj-$(CONFIG_DWMAC_MESON)	+= dwmac-meson.o dwmac-meson8b.o
 obj-$(CONFIG_DWMAC_QCOM_ETHQOS)	+= dwmac-qcom-ethqos.o
 obj-$(CONFIG_DWMAC_ROCKCHIP)	+= dwmac-rk.o
+obj-$(CONFIG_DWMAC_RZN1)	+= dwmac-rzn1.o
 obj-$(CONFIG_DWMAC_SOCFPGA)	+= dwmac-altr-socfpga.o
 obj-$(CONFIG_DWMAC_STARFIVE)	+= dwmac-starfive.o
 obj-$(CONFIG_DWMAC_STI)		+= dwmac-sti.o
diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-rzn1.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-rzn1.c
new file mode 100644
index 000000000000..e85524c2017c
--- /dev/null
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-rzn1.c
@@ -0,0 +1,88 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright (C) 2024 Schneider-Electric
+ *
+ * Clément Léger <clement.leger@bootlin.com>
+ */
+
+#include <linux/of.h>
+#include <linux/pcs-rzn1-miic.h>
+#include <linux/phylink.h>
+#include <linux/platform_device.h>
+
+#include "stmmac_platform.h"
+#include "stmmac.h"
+
+static int rzn1_dwmac_pcs_init(struct stmmac_priv *priv,
+			       struct mac_device_info *hw)
+{
+	struct device_node *np = priv->device->of_node;
+	struct device_node *pcs_node;
+	struct phylink_pcs *pcs;
+
+	pcs_node = of_parse_phandle(np, "pcs-handle", 0);
+
+	if (pcs_node) {
+		pcs = miic_create(priv->device, pcs_node);
+		of_node_put(pcs_node);
+		if (IS_ERR(pcs))
+			return PTR_ERR(pcs);
+
+		priv->hw->phylink_pcs = pcs;
+	}
+
+	return 0;
+}
+
+static void rzn1_dwmac_pcs_exit(struct stmmac_priv *priv,
+				struct mac_device_info *hw)
+{
+	if (priv->hw->phylink_pcs)
+		miic_destroy(priv->hw->phylink_pcs);
+}
+
+static int rzn1_dwmac_probe(struct platform_device *pdev)
+{
+	struct plat_stmmacenet_data *plat_dat;
+	struct stmmac_resources stmmac_res;
+	struct device *dev = &pdev->dev;
+	int ret;
+
+	ret = stmmac_get_platform_resources(pdev, &stmmac_res);
+	if (ret)
+		return ret;
+
+	plat_dat = devm_stmmac_probe_config_dt(pdev, stmmac_res.mac);
+	if (IS_ERR(plat_dat))
+		return PTR_ERR(plat_dat);
+
+	plat_dat->bsp_priv = plat_dat;
+	plat_dat->pcs_init = rzn1_dwmac_pcs_init;
+	plat_dat->pcs_exit = rzn1_dwmac_pcs_exit;
+
+	ret = stmmac_dvr_probe(dev, plat_dat, &stmmac_res);
+	if (ret)
+		return ret;
+
+	return 0;
+}
+
+static const struct of_device_id rzn1_dwmac_match[] = {
+	{ .compatible = "renesas,rzn1-gmac" },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, rzn1_dwmac_match);
+
+static struct platform_driver rzn1_dwmac_driver = {
+	.probe  = rzn1_dwmac_probe,
+	.remove_new = stmmac_pltfr_remove,
+	.driver = {
+		.name           = "rzn1-dwmac",
+		.of_match_table = rzn1_dwmac_match,
+	},
+};
+module_platform_driver(rzn1_dwmac_driver);
+
+MODULE_AUTHOR("Clément Léger <clement.leger@bootlin.com>");
+MODULE_DESCRIPTION("Renesas RZN1 DWMAC specific glue layer");
+MODULE_LICENSE("GPL");

-- 
2.44.0

Re: [PATCH net-next v2 4/5] net: stmmac: add support for RZ/N1 GMAC

[Geert Uytterhoeven]

Hi Romain,

On Tue, Apr 9, 2024 at 11:21 AM Romain Gantois
<romain.gantois@bootlin.com> wrote:
> From: Clément Léger <clement.leger@bootlin.com>
>
> Add support for the Renesas RZ/N1 GMAC. This support can make use of a
> custom RZ/N1 PCS which is fetched by parsing the pcs-handle device tree
> property.
>
> Signed-off-by: "Clément Léger" <clement.leger@bootlin.com>
> Co-developed-by: Romain Gantois <romain.gantois@bootlin.com>
> Signed-off-by: Romain Gantois <romain.gantois@bootlin.com>

Thanks for your patch!

> --- a/drivers/net/ethernet/stmicro/stmmac/Kconfig
> +++ b/drivers/net/ethernet/stmicro/stmmac/Kconfig
> @@ -142,6 +142,18 @@ config DWMAC_ROCKCHIP
>           This selects the Rockchip RK3288 SoC glue layer support for
>           the stmmac device driver.
>
> +config DWMAC_RZN1
> +       tristate "Renesas RZ/N1 dwmac support"
> +       default ARCH_RZN1

Why default to enabled?

> +       depends on OF && (ARCH_RZN1 || COMPILE_TEST)
> +       select PCS_RZN1_MIIC
> +       help
> +         Support for Ethernet controller on Renesas RZ/N1 SoC family.
> +
> +         This selects the Renesas RZ/N1 SoC glue layer support for
> +         the stmmac device driver. This support can make use of a custom MII
> +         converter PCS device.
> +
>  config DWMAC_SOCFPGA
>         tristate "SOCFPGA dwmac support"
>         default ARCH_INTEL_SOCFPGA

Gr{oetje,eeting}s,

                        Geert

-- 
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org

In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
                                -- Linus Torvalds

Re: [PATCH net-next v2 4/5] net: stmmac: add support for RZ/N1 GMAC

[Romain Gantois]

[-- Attachment #1: Type: text/plain, Size: 810 bytes --]

Hi Geert,

On Tue, 9 Apr 2024, Geert Uytterhoeven wrote:

> > +config DWMAC_RZN1
> > +       tristate "Renesas RZ/N1 dwmac support"
> > +       default ARCH_RZN1
> 
> Why default to enabled?
> 
> > +       depends on OF && (ARCH_RZN1 || COMPILE_TEST)

The kernel doc states this as one of the possible cases where setting default 
y/m makes sense:

```
Sub-driver behavior or similar options for a driver that is “default n”. This 
allows you to provide sane defaults.
```

In the case of DWMAC_RZN1, it is a suboption of stmmac which is "default n", and 
I think it makes sense to enable the RZN1 ethernet controller driver if both the 
stmmac driver and the RZN1 architecture were explicitely selected.

Best Regards,

-- 
Romain Gantois, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com

Re: [PATCH net-next v2 4/5] net: stmmac: add support for RZ/N1 GMAC

[Geert Uytterhoeven]

Hi Romain,

On Wed, Apr 10, 2024 at 2:24 PM Romain Gantois
<romain.gantois@bootlin.com> wrote:
> On Tue, 9 Apr 2024, Geert Uytterhoeven wrote:
> > > +config DWMAC_RZN1
> > > +       tristate "Renesas RZ/N1 dwmac support"
> > > +       default ARCH_RZN1
> >
> > Why default to enabled?
> >
> > > +       depends on OF && (ARCH_RZN1 || COMPILE_TEST)
>
> The kernel doc states this as one of the possible cases where setting default
> y/m makes sense:
>
> ```
> Sub-driver behavior or similar options for a driver that is “default n”. This
> allows you to provide sane defaults.
> ```
>
> In the case of DWMAC_RZN1, it is a suboption of stmmac which is "default n", and
> I think it makes sense to enable the RZN1 ethernet controller driver if both the
> stmmac driver and the RZN1 architecture were explicitely selected.

Thanks for your answer, that makes perfect sense!

Gr{oetje,eeting}s,

                        Geert

-- 
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org

In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
                                -- Linus Torvalds

[PATCH net-next v2 5/5] ARM: dts: r9a06g032: describe GMAC1

[Romain Gantois]

From: Clément Léger <clement.leger@bootlin.com>

The r9a06g032 SoC of the RZ/N1 family features two GMAC devices named
GMAC1/2, that are based on Synopsys cores. GMAC1 is connected to a
RGMII/RMII converter that is already described in this device tree.

Signed-off-by: "Clément Léger" <clement.leger@bootlin.com>
[rgantois: commit log]
Signed-off-by: Romain Gantois <romain.gantois@bootlin.com>
---
 arch/arm/boot/dts/renesas/r9a06g032.dtsi | 19 +++++++++++++++++++
 1 file changed, 19 insertions(+)

diff --git a/arch/arm/boot/dts/renesas/r9a06g032.dtsi b/arch/arm/boot/dts/renesas/r9a06g032.dtsi
index fa63e1afc4ef..cab7a641f95b 100644
--- a/arch/arm/boot/dts/renesas/r9a06g032.dtsi
+++ b/arch/arm/boot/dts/renesas/r9a06g032.dtsi
@@ -316,6 +316,25 @@ dma1: dma-controller@40105000 {
 			data-width = <8>;
 		};
 
+		gmac1: ethernet@44000000 {
+			compatible = "renesas,r9a06g032-gmac", "renesas,rzn1-gmac", "snps,dwmac";
+			reg = <0x44000000 0x2000>;
+			interrupt-parent = <&gic>;
+			interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "macirq", "eth_wake_irq", "eth_lpi";
+			clocks = <&sysctrl R9A06G032_HCLK_GMAC0>;
+			clock-names = "stmmaceth";
+			power-domains = <&sysctrl>;
+			snps,multicast-filter-bins = <256>;
+			snps,perfect-filter-entries = <128>;
+			tx-fifo-depth = <2048>;
+			rx-fifo-depth = <4096>;
+			pcs-handle = <&mii_conv1>;
+			status = "disabled";
+		};
+
 		gmac2: ethernet@44002000 {
 			compatible = "renesas,r9a06g032-gmac", "renesas,rzn1-gmac", "snps,dwmac";
 			reg = <0x44002000 0x2000>;

-- 
2.44.0