netdev.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Kory Maincent <kory.maincent@bootlin.com>
To: "David S. Miller" <davem@davemloft.net>,
	 Eric Dumazet <edumazet@google.com>,
	Jakub Kicinski <kuba@kernel.org>,
	 Paolo Abeni <pabeni@redhat.com>,
	Jonathan Corbet <corbet@lwn.net>,
	 Luis Chamberlain <mcgrof@kernel.org>,
	Russ Weight <russ.weight@linux.dev>,
	 Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
	 "Rafael J. Wysocki" <rafael@kernel.org>,
	Rob Herring <robh+dt@kernel.org>,
	 Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
	 Conor Dooley <conor+dt@kernel.org>,
	 Oleksij Rempel <o.rempel@pengutronix.de>,
	Mark Brown <broonie@kernel.org>,
	 Frank Rowand <frowand.list@gmail.com>,
	Andrew Lunn <andrew@lunn.ch>,
	 Heiner Kallweit <hkallweit1@gmail.com>,
	 Russell King <linux@armlinux.org.uk>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>,
	netdev@vger.kernel.org,  linux-kernel@vger.kernel.org,
	linux-doc@vger.kernel.org,  devicetree@vger.kernel.org,
	Dent Project <dentproject@linuxfoundation.org>,
	 kernel@pengutronix.de,
	Maxime Chevallier <maxime.chevallier@bootlin.com>,
	 Kory Maincent <kory.maincent@bootlin.com>
Subject: [PATCH net-next v8 06/17] net: ethtool: pse-pd: Expand pse commands with the PSE PoE interface
Date: Sun, 14 Apr 2024 16:21:55 +0200	[thread overview]
Message-ID: <20240414-feature_poe-v8-6-e4bf1e860da5@bootlin.com> (raw)
In-Reply-To: <20240414-feature_poe-v8-0-e4bf1e860da5@bootlin.com>

From: Kory Maincent (Dent Project) <kory.maincent@bootlin.com>

Add PSE PoE interface support in the ethtool pse command.

Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Kory Maincent <kory.maincent@bootlin.com>
---

Changes in v2:
- Follow the "c33" PoE prefix naming change.

Changes in v3:
- Replace the pse_get_types() helper by pse_has_podl() and pse_has_c33().
- Replace PoE to c33 in the netlink error log.
- Fix documentation build warning.
---
 Documentation/networking/ethtool-netlink.rst | 20 ++++++++++
 net/ethtool/pse-pd.c                         | 60 +++++++++++++++++++++++-----
 2 files changed, 70 insertions(+), 10 deletions(-)

diff --git a/Documentation/networking/ethtool-netlink.rst b/Documentation/networking/ethtool-netlink.rst
index 4e63d3708ed9..8bc71f249448 100644
--- a/Documentation/networking/ethtool-netlink.rst
+++ b/Documentation/networking/ethtool-netlink.rst
@@ -1733,6 +1733,10 @@ Kernel response contents:
                                                   PSE functions
   ``ETHTOOL_A_PODL_PSE_PW_D_STATUS``         u32  power detection status of the
                                                   PoDL PSE.
+  ``ETHTOOL_A_C33_PSE_ADMIN_STATE``          u32  Operational state of the PoE
+                                                  PSE functions.
+  ``ETHTOOL_A_C33_PSE_PW_D_STATUS``          u32  power detection status of the
+                                                  PoE PSE.
   ======================================  ======  =============================
 
 When set, the optional ``ETHTOOL_A_PODL_PSE_ADMIN_STATE`` attribute identifies
@@ -1744,6 +1748,12 @@ aPoDLPSEAdminState. Possible values are:
 .. kernel-doc:: include/uapi/linux/ethtool.h
     :identifiers: ethtool_podl_pse_admin_state
 
+The same goes for ``ETHTOOL_A_C33_PSE_ADMIN_STATE`` implementing
+``IEEE 802.3-2022`` 30.9.1.1.2 aPSEAdminState.
+
+.. kernel-doc:: include/uapi/linux/ethtool.h
+    :identifiers: ethtool_c33_pse_admin_state
+
 When set, the optional ``ETHTOOL_A_PODL_PSE_PW_D_STATUS`` attribute identifies
 the power detection status of the PoDL PSE.  The status depend on internal PSE
 state machine and automatic PD classification support. This option is
@@ -1753,6 +1763,12 @@ Possible values are:
 .. kernel-doc:: include/uapi/linux/ethtool.h
     :identifiers: ethtool_podl_pse_pw_d_status
 
+The same goes for ``ETHTOOL_A_C33_PSE_ADMIN_PW_D_STATUS`` implementing
+``IEEE 802.3-2022`` 30.9.1.1.5 aPSEPowerDetectionStatus.
+
+.. kernel-doc:: include/uapi/linux/ethtool.h
+    :identifiers: ethtool_c33_pse_pw_d_status
+
 PSE_SET
 =======
 
@@ -1763,6 +1779,7 @@ Request contents:
   ======================================  ======  =============================
   ``ETHTOOL_A_PSE_HEADER``                nested  request header
   ``ETHTOOL_A_PODL_PSE_ADMIN_CONTROL``       u32  Control PoDL PSE Admin state
+  ``ETHTOOL_A_C33_PSE_ADMIN_CONTROL``        u32  Control PSE Admin state
   ======================================  ======  =============================
 
 When set, the optional ``ETHTOOL_A_PODL_PSE_ADMIN_CONTROL`` attribute is used
@@ -1770,6 +1787,9 @@ to control PoDL PSE Admin functions. This option is implementing
 ``IEEE 802.3-2018`` 30.15.1.2.1 acPoDLPSEAdminControl. See
 ``ETHTOOL_A_PODL_PSE_ADMIN_STATE`` for supported values.
 
+The same goes for ``ETHTOOL_A_C33_PSE_ADMIN_CONTROL`` implementing
+``IEEE 802.3-2022`` 30.9.1.2.1 acPSEAdminControl.
+
 RSS_GET
 =======
 
diff --git a/net/ethtool/pse-pd.c b/net/ethtool/pse-pd.c
index aef57a058f0d..a3bfc3d9644e 100644
--- a/net/ethtool/pse-pd.c
+++ b/net/ethtool/pse-pd.c
@@ -82,6 +82,10 @@ static int pse_reply_size(const struct ethnl_req_info *req_base,
 		len += nla_total_size(sizeof(u32)); /* _PODL_PSE_ADMIN_STATE */
 	if (st->podl_pw_status > 0)
 		len += nla_total_size(sizeof(u32)); /* _PODL_PSE_PW_D_STATUS */
+	if (st->c33_admin_state > 0)
+		len += nla_total_size(sizeof(u32)); /* _C33_PSE_ADMIN_STATE */
+	if (st->c33_pw_status > 0)
+		len += nla_total_size(sizeof(u32)); /* _C33_PSE_PW_D_STATUS */
 
 	return len;
 }
@@ -103,6 +107,16 @@ static int pse_fill_reply(struct sk_buff *skb,
 			st->podl_pw_status))
 		return -EMSGSIZE;
 
+	if (st->c33_admin_state > 0 &&
+	    nla_put_u32(skb, ETHTOOL_A_C33_PSE_ADMIN_STATE,
+			st->c33_admin_state))
+		return -EMSGSIZE;
+
+	if (st->c33_pw_status > 0 &&
+	    nla_put_u32(skb, ETHTOOL_A_C33_PSE_PW_D_STATUS,
+			st->c33_pw_status))
+		return -EMSGSIZE;
+
 	return 0;
 }
 
@@ -113,25 +127,18 @@ const struct nla_policy ethnl_pse_set_policy[ETHTOOL_A_PSE_MAX + 1] = {
 	[ETHTOOL_A_PODL_PSE_ADMIN_CONTROL] =
 		NLA_POLICY_RANGE(NLA_U32, ETHTOOL_PODL_PSE_ADMIN_STATE_DISABLED,
 				 ETHTOOL_PODL_PSE_ADMIN_STATE_ENABLED),
+	[ETHTOOL_A_C33_PSE_ADMIN_CONTROL] =
+		NLA_POLICY_RANGE(NLA_U32, ETHTOOL_C33_PSE_ADMIN_STATE_DISABLED,
+				 ETHTOOL_C33_PSE_ADMIN_STATE_ENABLED),
 };
 
 static int
 ethnl_set_pse_validate(struct ethnl_req_info *req_info, struct genl_info *info)
-{
-	return !!info->attrs[ETHTOOL_A_PODL_PSE_ADMIN_CONTROL];
-}
-
-static int
-ethnl_set_pse(struct ethnl_req_info *req_info, struct genl_info *info)
 {
 	struct net_device *dev = req_info->dev;
-	struct pse_control_config config = {};
 	struct nlattr **tb = info->attrs;
 	struct phy_device *phydev;
 
-	/* this values are already validated by the ethnl_pse_set_policy */
-	config.podl_admin_control = nla_get_u32(tb[ETHTOOL_A_PODL_PSE_ADMIN_CONTROL]);
-
 	phydev = dev->phydev;
 	if (!phydev) {
 		NL_SET_ERR_MSG(info->extack, "No PHY is attached");
@@ -143,6 +150,39 @@ ethnl_set_pse(struct ethnl_req_info *req_info, struct genl_info *info)
 		return -EOPNOTSUPP;
 	}
 
+	if (tb[ETHTOOL_A_PODL_PSE_ADMIN_CONTROL] &&
+	    !(pse_has_podl(phydev->psec))) {
+		NL_SET_ERR_MSG_ATTR(info->extack,
+				    tb[ETHTOOL_A_PODL_PSE_ADMIN_CONTROL],
+				    "setting PoDL PSE admin control not supported");
+		return -EOPNOTSUPP;
+	}
+	if (tb[ETHTOOL_A_C33_PSE_ADMIN_CONTROL] &&
+	    !(pse_has_c33(phydev->psec))) {
+		NL_SET_ERR_MSG_ATTR(info->extack,
+				    tb[ETHTOOL_A_C33_PSE_ADMIN_CONTROL],
+				    "setting C33 PSE admin control not supported");
+		return -EOPNOTSUPP;
+	}
+
+	return 1;
+}
+
+static int
+ethnl_set_pse(struct ethnl_req_info *req_info, struct genl_info *info)
+{
+	struct net_device *dev = req_info->dev;
+	struct pse_control_config config = {};
+	struct nlattr **tb = info->attrs;
+	struct phy_device *phydev;
+
+	phydev = dev->phydev;
+	/* These values are already validated by the ethnl_pse_set_policy */
+	if (pse_has_podl(phydev->psec))
+		config.podl_admin_control = nla_get_u32(tb[ETHTOOL_A_PODL_PSE_ADMIN_CONTROL]);
+	if (pse_has_c33(phydev->psec))
+		config.c33_admin_control = nla_get_u32(tb[ETHTOOL_A_C33_PSE_ADMIN_CONTROL]);
+
 	/* Return errno directly - PSE has no notification */
 	return pse_ethtool_set_config(phydev->psec, info->extack, &config);
 }

-- 
2.34.1


  parent reply	other threads:[~2024-04-14 14:23 UTC|newest]

Thread overview: 29+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2024-04-14 14:21 [PATCH net-next v8 00/17] net: Add support for Power over Ethernet (PoE) Kory Maincent
2024-04-14 14:21 ` [PATCH net-next v8 01/17] MAINTAINERS: net: Add Oleksij to pse-pd maintainers Kory Maincent
2024-04-17  2:40   ` patchwork-bot+netdevbpf
2024-04-14 14:21 ` [PATCH net-next v8 02/17] of: property: Add fw_devlink support for pse parent Kory Maincent
2024-04-24  5:48   ` Saravana Kannan
2024-04-24  7:59     ` Kory Maincent
2024-04-14 14:21 ` [PATCH net-next v8 03/17] net: pse-pd: Rectify and adapt the naming of admin_cotrol member of struct pse_control_config Kory Maincent
2024-04-14 14:21 ` [PATCH net-next v8 04/17] ethtool: Expand Ethernet Power Equipment with c33 (PoE) alongside PoDL Kory Maincent
2024-04-17  2:20   ` Jakub Kicinski
2024-04-17  6:12     ` Kory Maincent
2024-04-14 14:21 ` [PATCH net-next v8 05/17] net: pse-pd: Introduce PSE types enumeration Kory Maincent
2024-04-14 14:21 ` Kory Maincent [this message]
2024-04-17  2:23   ` [PATCH net-next v8 06/17] net: ethtool: pse-pd: Expand pse commands with the PSE PoE interface Jakub Kicinski
2024-04-17  6:14     ` Kory Maincent
2024-04-14 14:21 ` [PATCH net-next v8 07/17] netlink: specs: Modify pse attribute prefix Kory Maincent
2024-04-14 14:21 ` [PATCH net-next v8 08/17] netlink: specs: Expand the pse netlink command with PoE interface Kory Maincent
2024-04-14 14:21 ` [PATCH net-next v8 09/17] MAINTAINERS: Add myself to pse networking maintainer Kory Maincent
2024-04-14 14:21 ` [PATCH net-next v8 10/17] net: pse-pd: Add support for PSE PIs Kory Maincent
2024-04-17  2:15   ` Jakub Kicinski
2024-04-17  2:28   ` Jakub Kicinski
2024-04-14 14:22 ` [PATCH net-next v8 11/17] dt-bindings: net: pse-pd: Add another way of describing several " Kory Maincent
2024-04-14 16:24   ` Rob Herring
2024-04-14 14:22 ` [PATCH net-next v8 12/17] net: pse-pd: Add support for setup_pi_matrix callback Kory Maincent
2024-04-14 14:22 ` [PATCH net-next v8 13/17] net: pse-pd: Use regulator framework within PSE framework Kory Maincent
2024-04-14 14:22 ` [PATCH net-next v8 14/17] dt-bindings: net: pse-pd: Add bindings for PD692x0 PSE controller Kory Maincent
2024-04-14 14:22 ` [PATCH net-next v8 15/17] net: pse-pd: Add PD692x0 PSE controller driver Kory Maincent
2024-04-14 14:22 ` [PATCH net-next v8 16/17] dt-bindings: net: pse-pd: Add bindings for TPS23881 PSE controller Kory Maincent
2024-04-14 14:22 ` [PATCH net-next v8 17/17] net: pse-pd: Add TI TPS23881 PSE controller driver Kory Maincent
2024-04-16 21:56 ` [PATCH net-next v8 00/17] net: Add support for Power over Ethernet (PoE) Kory Maincent

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20240414-feature_poe-v8-6-e4bf1e860da5@bootlin.com \
    --to=kory.maincent@bootlin.com \
    --cc=andrew@lunn.ch \
    --cc=broonie@kernel.org \
    --cc=conor+dt@kernel.org \
    --cc=corbet@lwn.net \
    --cc=davem@davemloft.net \
    --cc=dentproject@linuxfoundation.org \
    --cc=devicetree@vger.kernel.org \
    --cc=edumazet@google.com \
    --cc=frowand.list@gmail.com \
    --cc=gregkh@linuxfoundation.org \
    --cc=hkallweit1@gmail.com \
    --cc=kernel@pengutronix.de \
    --cc=krzysztof.kozlowski+dt@linaro.org \
    --cc=kuba@kernel.org \
    --cc=linux-doc@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux@armlinux.org.uk \
    --cc=maxime.chevallier@bootlin.com \
    --cc=mcgrof@kernel.org \
    --cc=netdev@vger.kernel.org \
    --cc=o.rempel@pengutronix.de \
    --cc=pabeni@redhat.com \
    --cc=rafael@kernel.org \
    --cc=robh+dt@kernel.org \
    --cc=russ.weight@linux.dev \
    --cc=thomas.petazzoni@bootlin.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).