[PATCH net-next v8 08/17] netlink: specs: Expand the pse netlink command with PoE interface

[Kory Maincent <kory.maincent@bootlin.com>]

From: Kory Maincent (Dent Project) <kory.maincent@bootlin.com>

Add the PoE pse attributes prefix to be able to use PoE interface.

Example usage:
./ynl/cli.py --spec netlink/specs/ethtool.yaml --no-schema --do pse-get \
             --json '{"header":{"dev-name":"eth0"}}'
{'header': {'dev-index': 4, 'dev-name': 'eth0'},
 'c33-pse-admin-state': 3,
 'c33-pse-pw-d-status': 4}

./ynl/cli.py --spec netlink/specs/ethtool.yaml --no-schema --do pse-set \
             --json '{"header":{"dev-name":"eth0"},
		     "c33-pse-admin-control":3}'

Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Kory Maincent <kory.maincent@bootlin.com>
---

Changes in v2:
- Follow the "c33" PoE prefix naming change.
- Add the ethtool auto generated code.

Changes in v3:
- Remove the ethtool auto generated code.
---
 Documentation/netlink/specs/ethtool.yaml | 15 +++++++++++++++
 1 file changed, 15 insertions(+)

diff --git a/Documentation/netlink/specs/ethtool.yaml b/Documentation/netlink/specs/ethtool.yaml
index 9a454cb924f7..00dc61358be8 100644
--- a/Documentation/netlink/specs/ethtool.yaml
+++ b/Documentation/netlink/specs/ethtool.yaml
@@ -910,6 +910,18 @@ attribute-sets:
         name: podl-pse-pw-d-status
         type: u32
         name-prefix: ethtool-a-
+      -
+        name: c33-pse-admin-state
+        type: u32
+        name-prefix: ethtool-a-
+      -
+        name: c33-pse-admin-control
+        type: u32
+        name-prefix: ethtool-a-
+      -
+        name: c33-pse-pw-d-status
+        type: u32
+        name-prefix: ethtool-a-
   -
     name: rss
     attributes:
@@ -1596,6 +1608,9 @@ operations:
             - podl-pse-admin-state
             - podl-pse-admin-control
             - podl-pse-pw-d-status
+            - c33-pse-admin-state
+            - c33-pse-admin-control
+            - c33-pse-pw-d-status
       dump: *pse-get-op
     -
       name: pse-set

-- 
2.34.1