From: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
To: intel-wired-lan@lists.osuosl.org
Cc: netdev@vger.kernel.org, jacob.e.keller@intel.com,
michal.kubiak@intel.com, maciej.fijalkowski@intel.com,
sridhar.samudrala@intel.com, przemyslaw.kitszel@intel.com,
wojciech.drewek@intel.com, pio.raczynski@gmail.com,
jiri@nvidia.com, mateusz.polchlopek@intel.com
Subject: [iwl-next v4 8/8] ice: allow to activate and deactivate subfunction
Date: Wed, 17 Apr 2024 16:20:28 +0200 [thread overview]
Message-ID: <20240417142028.2171-9-michal.swiatkowski@linux.intel.com> (raw)
In-Reply-To: <20240417142028.2171-1-michal.swiatkowski@linux.intel.com>
From: Piotr Raczynski <piotr.raczynski@intel.com>
Use previously implemented SF aux driver. It is probe during SF
activation and remove after deactivation.
Signed-off-by: Piotr Raczynski <piotr.raczynski@intel.com>
Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
---
.../ethernet/intel/ice/devlink/devlink_port.c | 106 ++++++++++++++++++
.../ethernet/intel/ice/devlink/devlink_port.h | 5 +
drivers/net/ethernet/intel/ice/ice_sf_eth.c | 104 +++++++++++++++++
drivers/net/ethernet/intel/ice/ice_sf_eth.h | 3 +
4 files changed, 218 insertions(+)
diff --git a/drivers/net/ethernet/intel/ice/devlink/devlink_port.c b/drivers/net/ethernet/intel/ice/devlink/devlink_port.c
index 0ab4d687e311..efff286f9e3e 100644
--- a/drivers/net/ethernet/intel/ice/devlink/devlink_port.c
+++ b/drivers/net/ethernet/intel/ice/devlink/devlink_port.c
@@ -482,6 +482,42 @@ void ice_devlink_destroy_sf_dev_port(struct ice_sf_dev *sf_dev)
devl_port_unregister(&sf_dev->priv->devlink_port);
}
+/**
+ * ice_activate_dynamic_port - Activate a dynamic port
+ * @dyn_port: dynamic port instance to activate
+ * @extack: extack for reporting error messages
+ *
+ * Activate the dynamic port based on its flavour.
+ *
+ * Return: zero on success or an error code on failure.
+ */
+static int
+ice_activate_dynamic_port(struct ice_dynamic_port *dyn_port,
+ struct netlink_ext_ack *extack)
+{
+ int err;
+
+ err = ice_sf_eth_activate(dyn_port, extack);
+ if (err)
+ return err;
+
+ dyn_port->active = true;
+
+ return 0;
+}
+
+/**
+ * ice_deactivate_dynamic_port - Deactivate a dynamic port
+ * @dyn_port: dynamic port instance to deactivate
+ *
+ * Undo activation of a dynamic port.
+ */
+static void ice_deactivate_dynamic_port(struct ice_dynamic_port *dyn_port)
+{
+ ice_sf_eth_deactivate(dyn_port);
+ dyn_port->active = false;
+}
+
/**
* ice_dealloc_dynamic_port - Deallocate and remove a dynamic port
* @dyn_port: dynamic port instance to deallocate
@@ -494,6 +530,9 @@ static void ice_dealloc_dynamic_port(struct ice_dynamic_port *dyn_port)
struct devlink_port *devlink_port = &dyn_port->devlink_port;
struct ice_pf *pf = dyn_port->pf;
+ if (dyn_port->active)
+ ice_deactivate_dynamic_port(dyn_port);
+
xa_erase(&pf->sf_nums, devlink_port->attrs.pci_sf.sf);
devl_port_unregister(devlink_port);
ice_vsi_free(dyn_port->vsi);
@@ -638,10 +677,77 @@ ice_devlink_port_fn_hw_addr_get(struct devlink_port *port, u8 *hw_addr,
return 0;
}
+/**
+ * ice_devlink_port_fn_state_set - devlink handler for port state set
+ * @port: pointer to devlink port
+ * @state: state to set
+ * @extack: extack for reporting error messages
+ *
+ * Activates or deactivates the port.
+ *
+ * Return: zero on success or an error code on failure.
+ */
+static int
+ice_devlink_port_fn_state_set(struct devlink_port *port,
+ enum devlink_port_fn_state state,
+ struct netlink_ext_ack *extack)
+{
+ struct ice_dynamic_port *dyn_port;
+
+ dyn_port = ice_devlink_port_to_dyn(port);
+
+ switch (state) {
+ case DEVLINK_PORT_FN_STATE_ACTIVE:
+ if (!dyn_port->active)
+ return ice_activate_dynamic_port(dyn_port, extack);
+ break;
+ case DEVLINK_PORT_FN_STATE_INACTIVE:
+ if (dyn_port->active)
+ ice_deactivate_dynamic_port(dyn_port);
+ break;
+ }
+
+ return 0;
+}
+
+/**
+ * ice_devlink_port_fn_state_get - devlink handler for port state get
+ * @port: pointer to devlink port
+ * @state: admin configured state of the port
+ * @opstate: current port operational state
+ * @extack: extack for reporting error messages
+ *
+ * Gets port state.
+ *
+ * Return: zero on success or an error code on failure.
+ */
+static int
+ice_devlink_port_fn_state_get(struct devlink_port *port,
+ enum devlink_port_fn_state *state,
+ enum devlink_port_fn_opstate *opstate,
+ struct netlink_ext_ack *extack)
+{
+ struct ice_dynamic_port *dyn_port;
+
+ dyn_port = ice_devlink_port_to_dyn(port);
+
+ if (dyn_port->active) {
+ *state = DEVLINK_PORT_FN_STATE_ACTIVE;
+ *opstate = DEVLINK_PORT_FN_OPSTATE_ATTACHED;
+ } else {
+ *state = DEVLINK_PORT_FN_STATE_INACTIVE;
+ *opstate = DEVLINK_PORT_FN_OPSTATE_DETACHED;
+ }
+
+ return 0;
+}
+
static const struct devlink_port_ops ice_devlink_port_sf_ops = {
.port_del = ice_devlink_port_del,
.port_fn_hw_addr_get = ice_devlink_port_fn_hw_addr_get,
.port_fn_hw_addr_set = ice_devlink_port_fn_hw_addr_set,
+ .port_fn_state_get = ice_devlink_port_fn_state_get,
+ .port_fn_state_set = ice_devlink_port_fn_state_set,
};
/**
diff --git a/drivers/net/ethernet/intel/ice/devlink/devlink_port.h b/drivers/net/ethernet/intel/ice/devlink/devlink_port.h
index 33f07cec6bd6..3692b8617bd5 100644
--- a/drivers/net/ethernet/intel/ice/devlink/devlink_port.h
+++ b/drivers/net/ethernet/intel/ice/devlink/devlink_port.h
@@ -14,6 +14,7 @@
* @devlink_port: the associated devlink port structure
* @pf: pointer to the PF private structure
* @vsi: the VSI associated with this port
+ * @sf_dev: pointer to the subfunction device
*
* An instance of a dynamically added devlink port. Each port flavour
*/
@@ -23,6 +24,10 @@ struct ice_dynamic_port {
struct devlink_port devlink_port;
struct ice_pf *pf;
struct ice_vsi *vsi;
+ /* Flavour-specific implementation data */
+ union {
+ struct ice_sf_dev *sf_dev;
+ };
};
void ice_dealloc_all_dynamic_ports(struct ice_pf *pf);
diff --git a/drivers/net/ethernet/intel/ice/ice_sf_eth.c b/drivers/net/ethernet/intel/ice/ice_sf_eth.c
index ecef869c20a1..663bfdcf68b5 100644
--- a/drivers/net/ethernet/intel/ice/ice_sf_eth.c
+++ b/drivers/net/ethernet/intel/ice/ice_sf_eth.c
@@ -202,6 +202,8 @@ static struct auxiliary_driver ice_sf_driver = {
.id_table = ice_sf_dev_id_table
};
+static DEFINE_XARRAY_ALLOC1(ice_sf_aux_id);
+
/**
* ice_sf_driver_register - Register new auxiliary subfunction driver
*
@@ -221,3 +223,105 @@ void ice_sf_driver_unregister(void)
{
auxiliary_driver_unregister(&ice_sf_driver);
}
+
+/**
+ * ice_sf_dev_release - Release device associated with auxiliary device
+ * @device: pointer to the device
+ *
+ * Since most of the code for subfunction deactivation is handled in
+ * the remove handler, here just free tracking resources.
+ */
+static void ice_sf_dev_release(struct device *device)
+{
+ struct auxiliary_device *adev = to_auxiliary_dev(device);
+ struct ice_sf_dev *sf_dev = ice_adev_to_sf_dev(adev);
+
+ xa_erase(&ice_sf_aux_id, adev->id);
+ kfree(sf_dev);
+}
+
+/**
+ * ice_sf_eth_activate - Activate Ethernet subfunction port
+ * @dyn_port: the dynamic port instance for this subfunction
+ * @extack: extack for reporting error messages
+ *
+ * Activate the dynamic port as an Ethernet subfunction. Setup the netdev
+ * resources associated and initialize the auxiliary device.
+ *
+ * Return: zero on success or an error code on failure.
+ */
+int
+ice_sf_eth_activate(struct ice_dynamic_port *dyn_port,
+ struct netlink_ext_ack *extack)
+{
+ struct ice_pf *pf = dyn_port->pf;
+ struct ice_sf_dev *sf_dev;
+ struct pci_dev *pdev;
+ int err;
+ u32 id;
+
+ err = xa_alloc(&ice_sf_aux_id, &id, NULL, xa_limit_32b,
+ GFP_KERNEL);
+ if (err) {
+ NL_SET_ERR_MSG_MOD(extack, "Could not allocate subfunction ID");
+ return err;
+ }
+
+ sf_dev = kzalloc(sizeof(*sf_dev), GFP_KERNEL);
+ if (!sf_dev) {
+ err = -ENOMEM;
+ NL_SET_ERR_MSG_MOD(extack, "Could not allocate sf_dev memory");
+ goto xa_erase;
+ }
+ pdev = pf->pdev;
+
+ sf_dev->dyn_port = dyn_port;
+ sf_dev->adev.id = id;
+ sf_dev->adev.name = "sf";
+ sf_dev->adev.dev.release = ice_sf_dev_release;
+ sf_dev->adev.dev.parent = &pdev->dev;
+
+ err = auxiliary_device_init(&sf_dev->adev);
+ if (err) {
+ NL_SET_ERR_MSG_MOD(extack, "Failed to initialize auxiliary device");
+ goto sf_dev_free;
+ }
+
+ err = auxiliary_device_add(&sf_dev->adev);
+ if (err) {
+ NL_SET_ERR_MSG_MOD(extack, "Auxiliary device failed to probe");
+ goto aux_dev_uninit;
+ }
+
+ dyn_port->sf_dev = sf_dev;
+
+ return 0;
+
+aux_dev_uninit:
+ auxiliary_device_uninit(&sf_dev->adev);
+sf_dev_free:
+ kfree(sf_dev);
+xa_erase:
+ xa_erase(&ice_sf_aux_id, id);
+
+ return err;
+}
+
+/**
+ * ice_sf_eth_deactivate - Deactivate Ethernet subfunction port
+ * @dyn_port: the dynamic port instance for this subfunction
+ *
+ * Deactivate the Ethernet subfunction, removing its auxiliary device and the
+ * associated resources.
+ */
+void ice_sf_eth_deactivate(struct ice_dynamic_port *dyn_port)
+{
+ struct ice_sf_dev *sf_dev = dyn_port->sf_dev;
+
+ if (sf_dev) {
+ auxiliary_device_delete(&sf_dev->adev);
+ auxiliary_device_uninit(&sf_dev->adev);
+ }
+
+ dyn_port->sf_dev = NULL;
+}
diff --git a/drivers/net/ethernet/intel/ice/ice_sf_eth.h b/drivers/net/ethernet/intel/ice/ice_sf_eth.h
index e972c50f96c9..c558cad0a183 100644
--- a/drivers/net/ethernet/intel/ice/ice_sf_eth.h
+++ b/drivers/net/ethernet/intel/ice/ice_sf_eth.h
@@ -27,4 +27,7 @@ ice_sf_dev *ice_adev_to_sf_dev(struct auxiliary_device *adev)
int ice_sf_driver_register(void);
void ice_sf_driver_unregister(void);
+int ice_sf_eth_activate(struct ice_dynamic_port *dyn_port,
+ struct netlink_ext_ack *extack);
+void ice_sf_eth_deactivate(struct ice_dynamic_port *dyn_port);
#endif /* _ICE_SF_ETH_H_ */
--
2.42.0
next prev parent reply other threads:[~2024-04-17 14:16 UTC|newest]
Thread overview: 24+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-04-17 14:20 [iwl-next v4 0/8] ice: support devlink subfunction Michal Swiatkowski
2024-04-17 14:20 ` [iwl-next v4 1/8] ice: add new VSI type for subfunctions Michal Swiatkowski
2024-04-17 14:20 ` [iwl-next v4 2/8] ice: export ice ndo_ops functions Michal Swiatkowski
2024-04-17 14:20 ` [iwl-next v4 3/8] ice: add basic devlink subfunctions support Michal Swiatkowski
2024-04-17 14:20 ` [iwl-next v4 4/8] ice: treat subfunction VSI the same as PF VSI Michal Swiatkowski
2024-04-17 14:20 ` [iwl-next v4 5/8] ice: allocate devlink for subfunction Michal Swiatkowski
2024-04-18 12:04 ` Jiri Pirko
2024-04-18 12:48 ` Michal Swiatkowski
2024-04-18 13:02 ` Jiri Pirko
2024-04-18 14:46 ` Michal Swiatkowski
2024-04-18 15:43 ` Jiri Pirko
2024-04-18 16:11 ` Michal Swiatkowski
2024-04-18 17:25 ` Jiri Pirko
2024-04-19 17:22 ` Michal Swiatkowski
2024-04-17 14:20 ` [iwl-next v4 6/8] ice: base subfunction aux driver Michal Swiatkowski
2024-04-18 7:57 ` Shay Drori
2024-04-18 14:47 ` Michal Swiatkowski
2024-04-18 13:02 ` Jiri Pirko
2024-04-18 14:47 ` Michal Swiatkowski
2024-04-17 14:20 ` [iwl-next v4 7/8] ice: implement netdev for subfunction Michal Swiatkowski
2024-04-17 14:20 ` Michal Swiatkowski [this message]
[not found] ` <0045c1a5-1065-40b3-ae61-1f372d4a89e5@nvidia.com>
2024-04-18 8:12 ` [iwl-next v4 8/8] ice: allow to activate and deactivate subfunction Shay Drori
2024-04-18 11:55 ` Michal Swiatkowski
2024-04-18 12:20 ` Shay Drori
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20240417142028.2171-9-michal.swiatkowski@linux.intel.com \
--to=michal.swiatkowski@linux.intel.com \
--cc=intel-wired-lan@lists.osuosl.org \
--cc=jacob.e.keller@intel.com \
--cc=jiri@nvidia.com \
--cc=maciej.fijalkowski@intel.com \
--cc=mateusz.polchlopek@intel.com \
--cc=michal.kubiak@intel.com \
--cc=netdev@vger.kernel.org \
--cc=pio.raczynski@gmail.com \
--cc=przemyslaw.kitszel@intel.com \
--cc=sridhar.samudrala@intel.com \
--cc=wojciech.drewek@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).