From: Felix Fietkau <nbd@nbd.name>
To: netdev@vger.kernel.org, Eric Dumazet <edumazet@google.com>,
"David S. Miller" <davem@davemloft.net>,
David Ahern <dsahern@kernel.org>,
Jakub Kicinski <kuba@kernel.org>, Paolo Abeni <pabeni@redhat.com>
Cc: willemdebruijn.kernel@gmail.com, linux-kernel@vger.kernel.org
Subject: [PATCH v3 net-next v3 6/6] net: add heuristic for enabling TCP fraglist GRO
Date: Fri, 26 Apr 2024 08:51:40 +0200 [thread overview]
Message-ID: <20240426065143.4667-7-nbd@nbd.name> (raw)
In-Reply-To: <20240426065143.4667-1-nbd@nbd.name>
When forwarding TCP after GRO, software segmentation is very expensive,
especially when the checksum needs to be recalculated.
One case where that's currently unavoidable is when routing packets over
PPPoE. Performance improves significantly when using fraglist GRO
implemented in the same way as for UDP.
When NETIF_F_GRO_FRAGLIST is enabled, perform a lookup for an established
socket in the same netns as the receiving device. While this may not
cover all relevant use cases in multi-netns configurations, it should be
good enough for most configurations that need this.
Here's a measurement of running 2 TCP streams through a MediaTek MT7622
device (2-core Cortex-A53), which runs NAT with flow offload enabled from
one ethernet port to PPPoE on another ethernet port + cake qdisc set to
1Gbps.
rx-gro-list off: 630 Mbit/s, CPU 35% idle
rx-gro-list on: 770 Mbit/s, CPU 40% idle
Signe-off-by: Felix Fietkau <nbd@nbd.name>
---
net/ipv4/tcp_offload.c | 30 ++++++++++++++++++++++++++++++
net/ipv6/tcpv6_offload.c | 33 +++++++++++++++++++++++++++++++++
2 files changed, 63 insertions(+)
diff --git a/net/ipv4/tcp_offload.c b/net/ipv4/tcp_offload.c
index ee5403760775..2ae83f4394dc 100644
--- a/net/ipv4/tcp_offload.c
+++ b/net/ipv4/tcp_offload.c
@@ -406,6 +406,34 @@ void tcp_gro_complete(struct sk_buff *skb)
}
EXPORT_SYMBOL(tcp_gro_complete);
+static void tcp4_check_fraglist_gro(struct list_head *head, struct sk_buff *skb,
+ struct tcphdr *th)
+{
+ const struct iphdr *iph = skb_gro_network_header(skb);
+ struct net *net = dev_net(skb->dev);
+ struct sk_buff *p;
+ struct sock *sk;
+ int iif, sdif;
+
+ if (!(skb->dev->features & NETIF_F_GRO_FRAGLIST))
+ return;
+
+ p = tcp_gro_lookup(head, th);
+ if (p) {
+ NAPI_GRO_CB(skb)->is_flist = NAPI_GRO_CB(p)->is_flist;
+ return;
+ }
+
+ inet_get_iif_sdif(skb, &iif, &sdif);
+ sk = __inet_lookup_established(net, net->ipv4.tcp_death_row.hashinfo,
+ iph->saddr, th->source,
+ iph->daddr, ntohs(th->dest),
+ iif, sdif);
+ NAPI_GRO_CB(skb)->is_flist = !sk;
+ if (sk)
+ sock_put(sk);
+}
+
INDIRECT_CALLABLE_SCOPE
struct sk_buff *tcp4_gro_receive(struct list_head *head, struct sk_buff *skb)
{
@@ -421,6 +449,8 @@ struct sk_buff *tcp4_gro_receive(struct list_head *head, struct sk_buff *skb)
if (!th)
goto flush;
+ tcp4_check_fraglist_gro(head, skb, th);
+
return tcp_gro_receive(head, skb, th);
flush:
diff --git a/net/ipv6/tcpv6_offload.c b/net/ipv6/tcpv6_offload.c
index c01ace2e9ff0..1ab45cca3936 100644
--- a/net/ipv6/tcpv6_offload.c
+++ b/net/ipv6/tcpv6_offload.c
@@ -7,12 +7,43 @@
*/
#include <linux/indirect_call_wrapper.h>
#include <linux/skbuff.h>
+#include <net/inet6_hashtables.h>
#include <net/gro.h>
#include <net/protocol.h>
#include <net/tcp.h>
#include <net/ip6_checksum.h>
#include "ip6_offload.h"
+static void tcp6_check_fraglist_gro(struct list_head *head, struct sk_buff *skb,
+ struct tcphdr *th)
+{
+#if IS_ENABLED(CONFIG_IPV6)
+ const struct ipv6hdr *hdr = skb_gro_network_header(skb);
+ struct net *net = dev_net(skb->dev);
+ struct sk_buff *p;
+ struct sock *sk;
+ int iif, sdif;
+
+ if (!(skb->dev->features & NETIF_F_GRO_FRAGLIST))
+ return;
+
+ p = tcp_gro_lookup(head, th);
+ if (p) {
+ NAPI_GRO_CB(skb)->is_flist = NAPI_GRO_CB(p)->is_flist;
+ return;
+ }
+
+ inet6_get_iif_sdif(skb, &iif, &sdif);
+ sk = __inet6_lookup_established(net, net->ipv4.tcp_death_row.hashinfo,
+ &hdr->saddr, th->source,
+ &hdr->daddr, ntohs(th->dest),
+ iif, sdif);
+ NAPI_GRO_CB(skb)->is_flist = !sk;
+ if (sk)
+ sock_put(sk);
+#endif /* IS_ENABLED(CONFIG_IPV6) */
+}
+
INDIRECT_CALLABLE_SCOPE
struct sk_buff *tcp6_gro_receive(struct list_head *head, struct sk_buff *skb)
{
@@ -28,6 +59,8 @@ struct sk_buff *tcp6_gro_receive(struct list_head *head, struct sk_buff *skb)
if (!th)
goto flush;
+ tcp6_check_fraglist_gro(head, skb, th);
+
return tcp_gro_receive(head, skb, th);
flush:
--
2.44.0
next prev parent reply other threads:[~2024-04-26 6:51 UTC|newest]
Thread overview: 22+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-04-26 6:51 [PATCH v3 net-next v3 0/6] Add TCP fraglist GRO support Felix Fietkau
2024-04-26 6:51 ` [PATCH v3 net-next v3 1/6] net: move skb_gro_receive_list from udp to core Felix Fietkau
2024-04-26 7:33 ` Eric Dumazet
2024-04-26 6:51 ` [PATCH v3 net-next v3 2/6] net: add support for segmenting TCP fraglist GSO packets Felix Fietkau
2024-04-26 7:44 ` Eric Dumazet
2024-04-26 9:28 ` Felix Fietkau
2024-04-26 8:28 ` Paolo Abeni
2024-04-26 9:39 ` Felix Fietkau
2024-04-26 10:40 ` Paolo Abeni
2024-04-26 11:35 ` Felix Fietkau
2024-04-26 6:51 ` [PATCH v3 net-next v3 3/6] net: add code for TCP fraglist GRO Felix Fietkau
2024-04-26 7:47 ` Eric Dumazet
2024-04-26 9:44 ` Felix Fietkau
2024-04-26 8:21 ` Paolo Abeni
2024-04-26 9:41 ` Felix Fietkau
2024-04-26 6:51 ` [PATCH v3 net-next v3 4/6] net: create tcp_gro_lookup helper function Felix Fietkau
2024-04-26 7:25 ` Eric Dumazet
2024-04-26 6:51 ` [PATCH v3 net-next v3 5/6] net: create tcp_gro_header_pull " Felix Fietkau
2024-04-26 7:27 ` Eric Dumazet
2024-04-26 6:51 ` Felix Fietkau [this message]
2024-04-26 7:32 ` [PATCH v3 net-next v3 6/6] net: add heuristic for enabling TCP fraglist GRO Eric Dumazet
2024-04-26 9:21 ` Felix Fietkau
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20240426065143.4667-7-nbd@nbd.name \
--to=nbd@nbd.name \
--cc=davem@davemloft.net \
--cc=dsahern@kernel.org \
--cc=edumazet@google.com \
--cc=kuba@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=netdev@vger.kernel.org \
--cc=pabeni@redhat.com \
--cc=willemdebruijn.kernel@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox