[PATCH AUTOSEL 6.6 01/19] wifi: mac80211: don't use rate mask for scanning

[PATCH AUTOSEL 6.6 01/19] wifi: mac80211: don't use rate mask for scanning

[Sasha Levin]

From: Johannes Berg <johannes.berg@intel.com>

[ Upstream commit ab9177d83c040eba58387914077ebca56f14fae6 ]

The rate mask is intended for use during operation, and
can be set to only have masks for the currently active
band. As such, it cannot be used for scanning which can
be on other bands as well.

Simply ignore the rate masks during scanning to avoid
warnings from incorrect settings.

Reported-by: syzbot+fdc5123366fb9c3fdc6d@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=fdc5123366fb9c3fdc6d
Co-developed-by: Dmitry Antipov <dmantipov@yandex.ru>
Signed-off-by: Dmitry Antipov <dmantipov@yandex.ru>
Tested-by: Dmitry Antipov <dmantipov@yandex.ru>
Link: https://msgid.link/20240326220854.9594cbb418ca.I7f86c0ba1f98cf7e27c2bacf6c2d417200ecea5c@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 include/net/mac80211.h |  3 +++
 net/mac80211/rate.c    |  6 +++++-
 net/mac80211/scan.c    |  1 +
 net/mac80211/tx.c      | 13 +++++++++----
 4 files changed, 18 insertions(+), 5 deletions(-)

diff --git a/include/net/mac80211.h b/include/net/mac80211.h
index 7c707358d15c8..a39bd4169f292 100644
--- a/include/net/mac80211.h
+++ b/include/net/mac80211.h
@@ -936,6 +936,8 @@ enum mac80211_tx_info_flags {
  *	of their QoS TID or other priority field values.
  * @IEEE80211_TX_CTRL_MCAST_MLO_FIRST_TX: first MLO TX, used mostly internally
  *	for sequence number assignment
+ * @IEEE80211_TX_CTRL_SCAN_TX: Indicates that this frame is transmitted
+ *	due to scanning, not in normal operation on the interface.
  * @IEEE80211_TX_CTRL_MLO_LINK: If not @IEEE80211_LINK_UNSPECIFIED, this
  *	frame should be transmitted on the specific link. This really is
  *	only relevant for frames that do not have data present, and is
@@ -956,6 +958,7 @@ enum mac80211_tx_control_flags {
 	IEEE80211_TX_CTRL_NO_SEQNO		= BIT(7),
 	IEEE80211_TX_CTRL_DONT_REORDER		= BIT(8),
 	IEEE80211_TX_CTRL_MCAST_MLO_FIRST_TX	= BIT(9),
+	IEEE80211_TX_CTRL_SCAN_TX		= BIT(10),
 	IEEE80211_TX_CTRL_MLO_LINK		= 0xf0000000,
 };
 
diff --git a/net/mac80211/rate.c b/net/mac80211/rate.c
index 9d33fd2377c88..a2bc9c5d92b8b 100644
--- a/net/mac80211/rate.c
+++ b/net/mac80211/rate.c
@@ -877,6 +877,7 @@ void ieee80211_get_tx_rates(struct ieee80211_vif *vif,
 	struct ieee80211_sub_if_data *sdata;
 	struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
 	struct ieee80211_supported_band *sband;
+	u32 mask = ~0;
 
 	rate_control_fill_sta_table(sta, info, dest, max_rates);
 
@@ -889,9 +890,12 @@ void ieee80211_get_tx_rates(struct ieee80211_vif *vif,
 	if (ieee80211_is_tx_data(skb))
 		rate_control_apply_mask(sdata, sta, sband, dest, max_rates);
 
+	if (!(info->control.flags & IEEE80211_TX_CTRL_SCAN_TX))
+		mask = sdata->rc_rateidx_mask[info->band];
+
 	if (dest[0].idx < 0)
 		__rate_control_send_low(&sdata->local->hw, sband, sta, info,
-					sdata->rc_rateidx_mask[info->band]);
+					mask);
 
 	if (sta)
 		rate_fixup_ratelist(vif, sband, info, dest, max_rates);
diff --git a/net/mac80211/scan.c b/net/mac80211/scan.c
index a52813f2b08cb..b68214f159838 100644
--- a/net/mac80211/scan.c
+++ b/net/mac80211/scan.c
@@ -636,6 +636,7 @@ static void ieee80211_send_scan_probe_req(struct ieee80211_sub_if_data *sdata,
 				cpu_to_le16(IEEE80211_SN_TO_SEQ(sn));
 		}
 		IEEE80211_SKB_CB(skb)->flags |= tx_flags;
+		IEEE80211_SKB_CB(skb)->control.flags |= IEEE80211_TX_CTRL_SCAN_TX;
 		ieee80211_tx_skb_tid_band(sdata, skb, 7, channel->band);
 	}
 }
diff --git a/net/mac80211/tx.c b/net/mac80211/tx.c
index 5c6c5254d987f..46b02a6ae0a36 100644
--- a/net/mac80211/tx.c
+++ b/net/mac80211/tx.c
@@ -705,11 +705,16 @@ ieee80211_tx_h_rate_ctrl(struct ieee80211_tx_data *tx)
 	txrc.bss_conf = &tx->sdata->vif.bss_conf;
 	txrc.skb = tx->skb;
 	txrc.reported_rate.idx = -1;
-	txrc.rate_idx_mask = tx->sdata->rc_rateidx_mask[info->band];
 
-	if (tx->sdata->rc_has_mcs_mask[info->band])
-		txrc.rate_idx_mcs_mask =
-			tx->sdata->rc_rateidx_mcs_mask[info->band];
+	if (unlikely(info->control.flags & IEEE80211_TX_CTRL_SCAN_TX)) {
+		txrc.rate_idx_mask = ~0;
+	} else {
+		txrc.rate_idx_mask = tx->sdata->rc_rateidx_mask[info->band];
+
+		if (tx->sdata->rc_has_mcs_mask[info->band])
+			txrc.rate_idx_mcs_mask =
+				tx->sdata->rc_rateidx_mcs_mask[info->band];
+	}
 
 	txrc.bss = (tx->sdata->vif.type == NL80211_IFTYPE_AP ||
 		    tx->sdata->vif.type == NL80211_IFTYPE_MESH_POINT ||
-- 
2.43.0

[PATCH AUTOSEL 6.6 02/19] wifi: mac80211: ensure beacon is non-S1G prior to extracting the beacon timestamp field

[Sasha Levin]

From: Richard Kinder <richard.kinder@gmail.com>

[ Upstream commit d12b9779cc9ba29d65fbfc728eb8a037871dd331 ]

Logic inside ieee80211_rx_mgmt_beacon accesses the
mgmt->u.beacon.timestamp field without first checking whether the beacon
received is non-S1G format.

Fix the problem by checking the beacon is non-S1G format to avoid access
of the mgmt->u.beacon.timestamp field.

Signed-off-by: Richard Kinder <richard.kinder@gmail.com>
Link: https://msgid.link/20240328005725.85355-1-richard.kinder@gmail.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/mac80211/mlme.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/net/mac80211/mlme.c b/net/mac80211/mlme.c
index 6e574e2adc22e..f07bf15179e18 100644
--- a/net/mac80211/mlme.c
+++ b/net/mac80211/mlme.c
@@ -5979,7 +5979,8 @@ static void ieee80211_rx_mgmt_beacon(struct ieee80211_link_data *link,
 			link->u.mgd.dtim_period = elems->dtim_period;
 		link->u.mgd.have_beacon = true;
 		ifmgd->assoc_data->need_beacon = false;
-		if (ieee80211_hw_check(&local->hw, TIMING_BEACON_ONLY)) {
+		if (ieee80211_hw_check(&local->hw, TIMING_BEACON_ONLY) &&
+		    !ieee80211_is_s1g_beacon(hdr->frame_control)) {
 			link->conf->sync_tsf =
 				le64_to_cpu(mgmt->u.beacon.timestamp);
 			link->conf->sync_device_ts =
-- 
2.43.0

[PATCH AUTOSEL 6.6 03/19] wifi: cfg80211: fix the order of arguments for trace events of the tx_rx_evt class

[Sasha Levin]

From: Igor Artemiev <Igor.A.Artemiev@mcst.ru>

[ Upstream commit 9ef369973cd2c97cce3388d2c0c7e3c056656e8a ]

The declarations of the tx_rx_evt class and the rdev_set_antenna event
use the wrong order of arguments in the TP_ARGS macro.

Fix the order of arguments in the TP_ARGS macro.

Found by Linux Verification Center (linuxtesting.org) with SVACE.

Signed-off-by: Igor Artemiev <Igor.A.Artemiev@mcst.ru>
Link: https://msgid.link/20240405152431.270267-1-Igor.A.Artemiev@mcst.ru
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/wireless/trace.h | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/net/wireless/trace.h b/net/wireless/trace.h
index 617c0d0dfa963..9c767b91e15d1 100644
--- a/net/wireless/trace.h
+++ b/net/wireless/trace.h
@@ -1747,7 +1747,7 @@ TRACE_EVENT(rdev_return_void_tx_rx,
 
 DECLARE_EVENT_CLASS(tx_rx_evt,
 	TP_PROTO(struct wiphy *wiphy, u32 tx, u32 rx),
-	TP_ARGS(wiphy, rx, tx),
+	TP_ARGS(wiphy, tx, rx),
 	TP_STRUCT__entry(
 		WIPHY_ENTRY
 		__field(u32, tx)
@@ -1764,7 +1764,7 @@ DECLARE_EVENT_CLASS(tx_rx_evt,
 
 DEFINE_EVENT(tx_rx_evt, rdev_set_antenna,
 	TP_PROTO(struct wiphy *wiphy, u32 tx, u32 rx),
-	TP_ARGS(wiphy, rx, tx)
+	TP_ARGS(wiphy, tx, rx)
 );
 
 DECLARE_EVENT_CLASS(wiphy_netdev_id_evt,
-- 
2.43.0

[PATCH AUTOSEL 6.6 06/19] net: usb: qmi_wwan: add Telit FN920C04 compositions

[Sasha Levin]

From: Daniele Palmas <dnlplm@gmail.com>

[ Upstream commit 0b8fe5bd73249dc20be2e88a12041f8920797b59 ]

Add the following Telit FN920C04 compositions:

0x10a0: rmnet + tty (AT/NMEA) + tty (AT) + tty (diag)
T:  Bus=03 Lev=01 Prnt=03 Port=06 Cnt=01 Dev#=  5 Spd=480  MxCh= 0
D:  Ver= 2.01 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
P:  Vendor=1bc7 ProdID=10a0 Rev=05.15
S:  Manufacturer=Telit Cinterion
S:  Product=FN920
S:  SerialNumber=92c4c4d8
C:  #Ifs= 4 Cfg#= 1 Atr=e0 MxPwr=500mA
I:  If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=50 Driver=qmi_wwan
E:  Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=82(I) Atr=03(Int.) MxPS=   8 Ivl=32ms
I:  If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=60 Driver=option
E:  Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=84(I) Atr=03(Int.) MxPS=  10 Ivl=32ms
I:  If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option
E:  Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=86(I) Atr=03(Int.) MxPS=  10 Ivl=32ms
I:  If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option
E:  Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms

0x10a4: rmnet + tty (AT) + tty (AT) + tty (diag)
T:  Bus=03 Lev=01 Prnt=03 Port=06 Cnt=01 Dev#=  8 Spd=480  MxCh= 0
D:  Ver= 2.01 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
P:  Vendor=1bc7 ProdID=10a4 Rev=05.15
S:  Manufacturer=Telit Cinterion
S:  Product=FN920
S:  SerialNumber=92c4c4d8
C:  #Ifs= 4 Cfg#= 1 Atr=e0 MxPwr=500mA
I:  If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=50 Driver=qmi_wwan
E:  Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=82(I) Atr=03(Int.) MxPS=   8 Ivl=32ms
I:  If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option
E:  Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=84(I) Atr=03(Int.) MxPS=  10 Ivl=32ms
I:  If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option
E:  Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=86(I) Atr=03(Int.) MxPS=  10 Ivl=32ms
I:  If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option
E:  Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms

0x10a9: rmnet + tty (AT) + tty (diag) + DPL (data packet logging) + adb
T:  Bus=03 Lev=01 Prnt=03 Port=06 Cnt=01 Dev#=  9 Spd=480  MxCh= 0
D:  Ver= 2.01 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
P:  Vendor=1bc7 ProdID=10a9 Rev=05.15
S:  Manufacturer=Telit Cinterion
S:  Product=FN920
S:  SerialNumber=92c4c4d8
C:  #Ifs= 5 Cfg#= 1 Atr=e0 MxPwr=500mA
I:  If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=50 Driver=qmi_wwan
E:  Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=82(I) Atr=03(Int.) MxPS=   8 Ivl=32ms
I:  If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option
E:  Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=84(I) Atr=03(Int.) MxPS=  10 Ivl=32ms
I:  If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option
E:  Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:  If#= 3 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=80 Driver=(none)
E:  Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:  If#= 4 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=(none)
E:  Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms

Signed-off-by: Daniele Palmas <dnlplm@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/usb/qmi_wwan.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/drivers/net/usb/qmi_wwan.c b/drivers/net/usb/qmi_wwan.c
index e2e181378f412..d1bd6b93a74e7 100644
--- a/drivers/net/usb/qmi_wwan.c
+++ b/drivers/net/usb/qmi_wwan.c
@@ -1368,6 +1368,9 @@ static const struct usb_device_id products[] = {
 	{QMI_QUIRK_SET_DTR(0x1bc7, 0x1060, 2)},	/* Telit LN920 */
 	{QMI_QUIRK_SET_DTR(0x1bc7, 0x1070, 2)},	/* Telit FN990 */
 	{QMI_QUIRK_SET_DTR(0x1bc7, 0x1080, 2)}, /* Telit FE990 */
+	{QMI_QUIRK_SET_DTR(0x1bc7, 0x10a0, 0)}, /* Telit FN920C04 */
+	{QMI_QUIRK_SET_DTR(0x1bc7, 0x10a4, 0)}, /* Telit FN920C04 */
+	{QMI_QUIRK_SET_DTR(0x1bc7, 0x10a9, 0)}, /* Telit FN920C04 */
 	{QMI_FIXED_INTF(0x1bc7, 0x1100, 3)},	/* Telit ME910 */
 	{QMI_FIXED_INTF(0x1bc7, 0x1101, 3)},	/* Telit ME910 dual modem */
 	{QMI_FIXED_INTF(0x1bc7, 0x1200, 5)},	/* Telit LE920 */
-- 
2.43.0

[PATCH AUTOSEL 6.6 13/19] Revert "net: txgbe: fix i2c dev name cannot match clkdev"

[Sasha Levin]

From: Duanqiang Wen <duanqiangwen@net-swift.com>

[ Upstream commit 8d6bf83f6740ba52a59e25dad360e1e87ef47666 ]

This reverts commit c644920ce9220d83e070f575a4df711741c07f07.
when register i2c dev, txgbe shorten "i2c_designware" to "i2c_dw",
will cause this i2c dev can't match platfom driver i2c_designware_platform.

Signed-off-by: Duanqiang Wen <duanqiangwen@net-swift.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://lore.kernel.org/r/20240422084109.3201-1-duanqiangwen@net-swift.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/wangxun/txgbe/txgbe_phy.c | 8 +++-----
 1 file changed, 3 insertions(+), 5 deletions(-)

diff --git a/drivers/net/ethernet/wangxun/txgbe/txgbe_phy.c b/drivers/net/ethernet/wangxun/txgbe/txgbe_phy.c
index ad5c213dac077..e457ac9ae6d88 100644
--- a/drivers/net/ethernet/wangxun/txgbe/txgbe_phy.c
+++ b/drivers/net/ethernet/wangxun/txgbe/txgbe_phy.c
@@ -20,8 +20,6 @@
 #include "txgbe_phy.h"
 #include "txgbe_hw.h"
 
-#define TXGBE_I2C_CLK_DEV_NAME "i2c_dw"
-
 static int txgbe_swnodes_register(struct txgbe *txgbe)
 {
 	struct txgbe_nodes *nodes = &txgbe->nodes;
@@ -553,8 +551,8 @@ static int txgbe_clock_register(struct txgbe *txgbe)
 	char clk_name[32];
 	struct clk *clk;
 
-	snprintf(clk_name, sizeof(clk_name), "%s.%d",
-		 TXGBE_I2C_CLK_DEV_NAME, pci_dev_id(pdev));
+	snprintf(clk_name, sizeof(clk_name), "i2c_dw.%d",
+		 pci_dev_id(pdev));
 
 	clk = clk_register_fixed_rate(NULL, clk_name, NULL, 0, 156250000);
 	if (IS_ERR(clk))
@@ -616,7 +614,7 @@ static int txgbe_i2c_register(struct txgbe *txgbe)
 
 	info.parent = &pdev->dev;
 	info.fwnode = software_node_fwnode(txgbe->nodes.group[SWNODE_I2C]);
-	info.name = TXGBE_I2C_CLK_DEV_NAME;
+	info.name = "i2c_designware";
 	info.id = pci_dev_id(pdev);
 
 	info.res = &DEFINE_RES_IRQ(pdev->irq);
-- 
2.43.0

[PATCH AUTOSEL 6.6 14/19] Revert "net: txgbe: fix clk_name exceed MAX_DEV_ID limits"

[Sasha Levin]

From: Duanqiang Wen <duanqiangwen@net-swift.com>

[ Upstream commit edd2d250fb3bb5d70419ae82c1f9dbb9684dffd3 ]

This reverts commit e30cef001da259e8df354b813015d0e5acc08740.
commit 99f4570cfba1 ("clkdev: Update clkdev id usage to allow
for longer names") can fix clk_name exceed MAX_DEV_ID limits,
so this commit is meaningless.

Signed-off-by: Duanqiang Wen <duanqiangwen@net-swift.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://lore.kernel.org/r/20240422084109.3201-2-duanqiangwen@net-swift.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/wangxun/txgbe/txgbe_phy.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/wangxun/txgbe/txgbe_phy.c b/drivers/net/ethernet/wangxun/txgbe/txgbe_phy.c
index e457ac9ae6d88..4159c84035fdc 100644
--- a/drivers/net/ethernet/wangxun/txgbe/txgbe_phy.c
+++ b/drivers/net/ethernet/wangxun/txgbe/txgbe_phy.c
@@ -551,7 +551,7 @@ static int txgbe_clock_register(struct txgbe *txgbe)
 	char clk_name[32];
 	struct clk *clk;
 
-	snprintf(clk_name, sizeof(clk_name), "i2c_dw.%d",
+	snprintf(clk_name, sizeof(clk_name), "i2c_designware.%d",
 		 pci_dev_id(pdev));
 
 	clk = clk_register_fixed_rate(NULL, clk_name, NULL, 0, 156250000);
-- 
2.43.0