From: Jose Ignacio Tornos Martinez <jtornosm@redhat.com>
To: davem@davemloft.net, edumazet@google.com, kuba@kernel.org,
pabeni@redhat.com, linux-usb@vger.kernel.org,
netdev@vger.kernel.org, linux-kernel@vger.kernel.org
Cc: Jose Ignacio Tornos Martinez <jtornosm@redhat.com>,
stable@vger.kernel.org, Isaac Ganoung <inventor500@vivaldi.net>,
Yongqin Liu <yongqin.liu@linaro.org>
Subject: [PATCH] net: usb: ax88179_178a: fix link status when link is set to down/up
Date: Fri, 10 May 2024 11:08:28 +0200 [thread overview]
Message-ID: <20240510090846.328201-1-jtornosm@redhat.com> (raw)
The idea was to keep only one reset at initialization stage in order to
reduce the total delay, or the reset from usbnet_probe or the reset from
usbnet_open.
I have seen that restarting from usbnet_probe is necessary to avoid doing
too complex things. But when the link is set to down/up (for example to
configure a different mac address) the link is not correctly recovered
unless a reset is commanded from usbnet_open.
So, detect the initialization stage (first call) to not reset from
usbnet_open after the reset from usbnet_probe and after this stage, always
reset from usbnet_open too (when the link needs to be rechecked).
Apply to all the possible devices, the behavior now is going to be the same.
cc: stable@vger.kernel.org # 6.6+
Fixes: 56f78615bcb1 ("net: usb: ax88179_178a: avoid writing the mac address before first reading")
Reported-by: Isaac Ganoung <inventor500@vivaldi.net>
Reported-by: Yongqin Liu <yongqin.liu@linaro.org>
Signed-off-by: Jose Ignacio Tornos Martinez <jtornosm@redhat.com>
---
drivers/net/usb/ax88179_178a.c | 37 ++++++++++++++++++++++++----------
1 file changed, 26 insertions(+), 11 deletions(-)
diff --git a/drivers/net/usb/ax88179_178a.c b/drivers/net/usb/ax88179_178a.c
index 377be0d9ef14..a0edb410f746 100644
--- a/drivers/net/usb/ax88179_178a.c
+++ b/drivers/net/usb/ax88179_178a.c
@@ -174,6 +174,7 @@ struct ax88179_data {
u32 wol_supported;
u32 wolopts;
u8 disconnecting;
+ u8 initialized;
};
struct ax88179_int_data {
@@ -1672,6 +1673,18 @@ static int ax88179_reset(struct usbnet *dev)
return 0;
}
+static int ax88179_net_reset(struct usbnet *dev)
+{
+ struct ax88179_data *ax179_data = dev->driver_priv;
+
+ if (ax179_data->initialized)
+ ax88179_reset(dev);
+ else
+ ax179_data->initialized = 1;
+
+ return 0;
+}
+
static int ax88179_stop(struct usbnet *dev)
{
u16 tmp16;
@@ -1691,6 +1704,7 @@ static const struct driver_info ax88179_info = {
.unbind = ax88179_unbind,
.status = ax88179_status,
.link_reset = ax88179_link_reset,
+ .reset = ax88179_net_reset,
.stop = ax88179_stop,
.flags = FLAG_ETHER | FLAG_FRAMING_AX,
.rx_fixup = ax88179_rx_fixup,
@@ -1703,6 +1717,7 @@ static const struct driver_info ax88178a_info = {
.unbind = ax88179_unbind,
.status = ax88179_status,
.link_reset = ax88179_link_reset,
+ .reset = ax88179_net_reset,
.stop = ax88179_stop,
.flags = FLAG_ETHER | FLAG_FRAMING_AX,
.rx_fixup = ax88179_rx_fixup,
@@ -1715,7 +1730,7 @@ static const struct driver_info cypress_GX3_info = {
.unbind = ax88179_unbind,
.status = ax88179_status,
.link_reset = ax88179_link_reset,
- .reset = ax88179_reset,
+ .reset = ax88179_net_reset,
.stop = ax88179_stop,
.flags = FLAG_ETHER | FLAG_FRAMING_AX,
.rx_fixup = ax88179_rx_fixup,
@@ -1728,7 +1743,7 @@ static const struct driver_info dlink_dub1312_info = {
.unbind = ax88179_unbind,
.status = ax88179_status,
.link_reset = ax88179_link_reset,
- .reset = ax88179_reset,
+ .reset = ax88179_net_reset,
.stop = ax88179_stop,
.flags = FLAG_ETHER | FLAG_FRAMING_AX,
.rx_fixup = ax88179_rx_fixup,
@@ -1741,7 +1756,7 @@ static const struct driver_info sitecom_info = {
.unbind = ax88179_unbind,
.status = ax88179_status,
.link_reset = ax88179_link_reset,
- .reset = ax88179_reset,
+ .reset = ax88179_net_reset,
.stop = ax88179_stop,
.flags = FLAG_ETHER | FLAG_FRAMING_AX,
.rx_fixup = ax88179_rx_fixup,
@@ -1754,7 +1769,7 @@ static const struct driver_info samsung_info = {
.unbind = ax88179_unbind,
.status = ax88179_status,
.link_reset = ax88179_link_reset,
- .reset = ax88179_reset,
+ .reset = ax88179_net_reset,
.stop = ax88179_stop,
.flags = FLAG_ETHER | FLAG_FRAMING_AX,
.rx_fixup = ax88179_rx_fixup,
@@ -1767,7 +1782,7 @@ static const struct driver_info lenovo_info = {
.unbind = ax88179_unbind,
.status = ax88179_status,
.link_reset = ax88179_link_reset,
- .reset = ax88179_reset,
+ .reset = ax88179_net_reset,
.stop = ax88179_stop,
.flags = FLAG_ETHER | FLAG_FRAMING_AX,
.rx_fixup = ax88179_rx_fixup,
@@ -1780,7 +1795,7 @@ static const struct driver_info belkin_info = {
.unbind = ax88179_unbind,
.status = ax88179_status,
.link_reset = ax88179_link_reset,
- .reset = ax88179_reset,
+ .reset = ax88179_net_reset,
.stop = ax88179_stop,
.flags = FLAG_ETHER | FLAG_FRAMING_AX,
.rx_fixup = ax88179_rx_fixup,
@@ -1793,7 +1808,7 @@ static const struct driver_info toshiba_info = {
.unbind = ax88179_unbind,
.status = ax88179_status,
.link_reset = ax88179_link_reset,
- .reset = ax88179_reset,
+ .reset = ax88179_net_reset,
.stop = ax88179_stop,
.flags = FLAG_ETHER | FLAG_FRAMING_AX,
.rx_fixup = ax88179_rx_fixup,
@@ -1806,7 +1821,7 @@ static const struct driver_info mct_info = {
.unbind = ax88179_unbind,
.status = ax88179_status,
.link_reset = ax88179_link_reset,
- .reset = ax88179_reset,
+ .reset = ax88179_net_reset,
.stop = ax88179_stop,
.flags = FLAG_ETHER | FLAG_FRAMING_AX,
.rx_fixup = ax88179_rx_fixup,
@@ -1819,7 +1834,7 @@ static const struct driver_info at_umc2000_info = {
.unbind = ax88179_unbind,
.status = ax88179_status,
.link_reset = ax88179_link_reset,
- .reset = ax88179_reset,
+ .reset = ax88179_net_reset,
.stop = ax88179_stop,
.flags = FLAG_ETHER | FLAG_FRAMING_AX,
.rx_fixup = ax88179_rx_fixup,
@@ -1832,7 +1847,7 @@ static const struct driver_info at_umc200_info = {
.unbind = ax88179_unbind,
.status = ax88179_status,
.link_reset = ax88179_link_reset,
- .reset = ax88179_reset,
+ .reset = ax88179_net_reset,
.stop = ax88179_stop,
.flags = FLAG_ETHER | FLAG_FRAMING_AX,
.rx_fixup = ax88179_rx_fixup,
@@ -1845,7 +1860,7 @@ static const struct driver_info at_umc2000sp_info = {
.unbind = ax88179_unbind,
.status = ax88179_status,
.link_reset = ax88179_link_reset,
- .reset = ax88179_reset,
+ .reset = ax88179_net_reset,
.stop = ax88179_stop,
.flags = FLAG_ETHER | FLAG_FRAMING_AX,
.rx_fixup = ax88179_rx_fixup,
--
2.44.0
next reply other threads:[~2024-05-10 9:09 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-05-10 9:08 Jose Ignacio Tornos Martinez [this message]
2024-05-11 15:23 ` [PATCH] net: usb: ax88179_178a: fix link status when link is set to down/up Simon Horman
2024-05-13 23:00 ` patchwork-bot+netdevbpf
2024-05-23 4:15 ` Yongqin Liu
2024-05-23 6:45 ` Jose Ignacio Tornos Martinez
2024-05-24 20:08 ` Yongqin Liu
2024-05-28 9:18 ` Jose Ignacio Tornos Martinez
2024-05-28 15:15 ` Yongqin Liu
2024-05-30 14:13 ` Jose Ignacio Tornos Martinez
2024-06-13 9:45 ` Jose Ignacio Tornos Martinez
2024-06-13 9:59 ` Jose Ignacio Tornos Martinez
2024-06-13 11:46 ` Yongqin Liu
2024-06-14 17:48 ` Yongqin Liu
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20240510090846.328201-1-jtornosm@redhat.com \
--to=jtornosm@redhat.com \
--cc=davem@davemloft.net \
--cc=edumazet@google.com \
--cc=inventor500@vivaldi.net \
--cc=kuba@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-usb@vger.kernel.org \
--cc=netdev@vger.kernel.org \
--cc=pabeni@redhat.com \
--cc=stable@vger.kernel.org \
--cc=yongqin.liu@linaro.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).