From: Kory Maincent <kory.maincent@bootlin.com>
To: Florian Fainelli <florian.fainelli@broadcom.com>,
Broadcom internal kernel review list
<bcm-kernel-feedback-list@broadcom.com>,
Andrew Lunn <andrew@lunn.ch>,
Heiner Kallweit <hkallweit1@gmail.com>,
Russell King <linux@armlinux.org.uk>,
"David S. Miller" <davem@davemloft.net>,
Eric Dumazet <edumazet@google.com>,
Jakub Kicinski <kuba@kernel.org>,
Paolo Abeni <pabeni@redhat.com>,
Richard Cochran <richardcochran@gmail.com>,
Radu Pirea <radu-nicolae.pirea@oss.nxp.com>,
Jay Vosburgh <j.vosburgh@gmail.com>,
Andy Gospodarek <andy@greyhouse.net>,
Nicolas Ferre <nicolas.ferre@microchip.com>,
Claudiu Beznea <claudiu.beznea@tuxon.dev>,
Willem de Bruijn <willemdebruijn.kernel@gmail.com>,
Jonathan Corbet <corbet@lwn.net>,
Horatiu Vultur <horatiu.vultur@microchip.com>,
UNGLinuxDriver@microchip.com, Simon Horman <horms@kernel.org>,
Vladimir Oltean <vladimir.oltean@nxp.com>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>,
netdev@vger.kernel.org, linux-kernel@vger.kernel.org,
linux-doc@vger.kernel.org,
Maxime Chevallier <maxime.chevallier@bootlin.com>,
Rahul Rameshbabu <rrameshbabu@nvidia.com>,
Kory Maincent <kory.maincent@bootlin.com>
Subject: [PATCH net-next v13 14/14] netlink: specs: tsinfo: Enhance netlink attributes and add a set command
Date: Wed, 29 May 2024 11:39:46 +0200 [thread overview]
Message-ID: <20240529-feature_ptp_netnext-v13-14-6eda4d40fa4f@bootlin.com> (raw)
In-Reply-To: <20240529-feature_ptp_netnext-v13-0-6eda4d40fa4f@bootlin.com>
Add new attributed to tsinfo allowing to get the tsinfo and the hwtstamp
from a phc provider (composed by a phc index and a phc qualifier) on a
netdevice's link.
Add simultaneously a set command to be able to set hwtstamp configuration
for a specified phc provider.
Here is few examples:
./ynl/cli.py --spec netlink/specs/ethtool.yaml --no-schema
--dump tsinfo-get
--json '{"header":{"dev-name":"eth0"}}'
[{'header': {'dev-index': 3, 'dev-name': 'eth0'},
'hwtst-provider': {'index': 0, 'qualifier': 0},
'phc-index': 0,
'rx-filters': {'bits': {'bit': [{'index': 0, 'name': 'none'},
{'index': 2, 'name': 'some'}]},
'nomask': True,
'size': 16},
'timestamping': {'bits': {'bit': [{'index': 0, 'name': 'hardware-transmit'},
{'index': 2, 'name': 'hardware-receive'},
{'index': 6,
'name': 'hardware-raw-clock'}]},
'nomask': True,
'size': 17},
'tx-types': {'bits': {'bit': [{'index': 0, 'name': 'off'},
{'index': 1, 'name': 'on'}]},
'nomask': True,
'size': 4}},
{'header': {'dev-index': 3, 'dev-name': 'eth0'},
'hwtst-provider': {'index': 2, 'qualifier': 0},
'phc-index': 2,
'rx-filters': {'bits': {'bit': [{'index': 0, 'name': 'none'},
{'index': 1, 'name': 'all'}]},
'nomask': True,
'size': 16},
'timestamping': {'bits': {'bit': [{'index': 0, 'name': 'hardware-transmit'},
{'index': 1, 'name': 'software-transmit'},
{'index': 2, 'name': 'hardware-receive'},
{'index': 3, 'name': 'software-receive'},
{'index': 4,
'name': 'software-system-clock'},
{'index': 6,
'name': 'hardware-raw-clock'}]},
'nomask': True,
'size': 17},
'tx-types': {'bits': {'bit': [{'index': 0, 'name': 'off'},
{'index': 1, 'name': 'on'},
{'index': 2, 'name': 'onestep-sync'}]},
'nomask': True,
'size': 4}}]
./ynl/cli.py --spec netlink/specs/ethtool.yaml --no-schema --do tsinfo-get
--json '{"header":{"dev-name":"eth0"},
"hwtst-provider":{"index":0, "qualifier":0 }
}'
{'header': {'dev-index': 3, 'dev-name': 'eth0'},
'hwtst-provider': {'index': 0, 'qualifier': 0},
'phc-index': 0,
'rx-filters': {'bits': {'bit': [{'index': 0, 'name': 'none'},
{'index': 2, 'name': 'some'}]},
'nomask': True,
'size': 16},
'timestamping': {'bits': {'bit': [{'index': 0, 'name': 'hardware-transmit'},
{'index': 2, 'name': 'hardware-receive'},
{'index': 6, 'name': 'hardware-raw-clock'}]},
'nomask': True,
'size': 17},
'tx-types': {'bits': {'bit': [{'index': 0, 'name': 'off'},
{'index': 1, 'name': 'on'}]},
'nomask': True,
'size': 4}}
./ynl/cli.py --spec netlink/specs/ethtool.yaml --no-schema --do tsinfo-set
--json '{"header":{"dev-name":"eth0"},
"hwtst-provider":{"index":2, "qualifier":0}}'
None
./ynl/cli.py --spec netlink/specs/ethtool.yaml --no-schema --do tsinfo-get
--json '{"header":{"dev-name":"eth0"}, "ghwtstamp":1}'
{'header': {'dev-index': 3, 'dev-name': 'eth0'},
'hwtst-flags': 1,
'rx-filters': {'bits': {'bit': [{'index': 0, 'name': 'none'}]},
'nomask': True,
'size': 16},
'tx-types': {'bits': {'bit': [{'index': 0, 'name': 'off'}]},
'nomask': True,
'size': 4}}
./ynl/cli.py --spec netlink/specs/ethtool.yaml --no-schema --do tsinfo-set
--json '{"header":{"dev-name":"eth0"},
"rx-filters":{"bits": {"bit": {"name":"ptpv2-l4-event"}},
"nomask": 1},
"tx-types":{"bits": {"bit": {"name":"on"}},
"nomask": 1}}'
None
Signed-off-by: Kory Maincent <kory.maincent@bootlin.com>
---
Changes in v8:
- New patch
Changes in v10:
- Add ghwtstamp attributes
- Add tsinfo ntf command
Changes in v11:
- Add examples in the commit message.
Changes in v13:
- Replace shorter name by real name.
- Fix an issue reported by "make -C tools/net/ynl" on the namings.
---
Documentation/netlink/specs/ethtool.yaml | 43 +++++++++++++++++++++++++++++++-
1 file changed, 42 insertions(+), 1 deletion(-)
diff --git a/Documentation/netlink/specs/ethtool.yaml b/Documentation/netlink/specs/ethtool.yaml
index 00dc61358be8..80484908c5ee 100644
--- a/Documentation/netlink/specs/ethtool.yaml
+++ b/Documentation/netlink/specs/ethtool.yaml
@@ -576,6 +576,15 @@ attribute-sets:
-
name: tx-err
type: uint
+ -
+ name: tsinfo-hwtstamp-provider
+ attributes:
+ -
+ name: index
+ type: u32
+ -
+ name: qualifier
+ type: u32
-
name: tsinfo
attributes:
@@ -602,6 +611,16 @@ attribute-sets:
name: stats
type: nest
nested-attributes: ts-stat
+ -
+ name: ghwtstamp
+ type: u8
+ -
+ name: hwtstamp-provider
+ type: nest
+ nested-attributes: tsinfo-hwtstamp-provider
+ -
+ name: hwtstamp-flags
+ type: u32
-
name: cable-result
attributes:
@@ -1406,7 +1425,7 @@ operations:
notify: eee-get
-
name: tsinfo-get
- doc: Get tsinfo params.
+ doc: Get tsinfo params or hwtstamp config.
attribute-set: tsinfo
@@ -1414,6 +1433,8 @@ operations:
request:
attributes:
- header
+ - ghwtstamp
+ - hwtstamp-provider
reply:
attributes:
- header
@@ -1422,6 +1443,8 @@ operations:
- rx-filters
- phc-index
- stats
+ - hwtstamp-provider
+ - hwtstamp-flags
dump: *tsinfo-get-op
-
name: cable-test-act
@@ -1730,3 +1753,21 @@ operations:
name: mm-ntf
doc: Notification for change in MAC Merge configuration.
notify: mm-get
+ -
+ name: tsinfo-set
+ doc: Set hwtstamp.
+
+ attribute-set: tsinfo
+
+ do:
+ request:
+ attributes:
+ - header
+ - tx-types
+ - rx-filters
+ - hwtstamp-provider
+ - hwtstamp-flags
+ -
+ name: tsinfo-ntf
+ doc: Notification for change in tsinfo configuration.
+ notify: tsinfo-get
--
2.34.1
prev parent reply other threads:[~2024-05-29 9:41 UTC|newest]
Thread overview: 22+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-05-29 9:39 [PATCH net-next v13 00/14] net: Make timestamping selectable Kory Maincent
2024-05-29 9:39 ` [PATCH net-next v13 01/14] net_tstamp: Add TIMESTAMPING SOFTWARE and HARDWARE mask Kory Maincent
2024-05-29 9:39 ` [PATCH net-next v13 02/14] net: Move dev_set_hwtstamp_phylib to net/core/dev.h Kory Maincent
2024-05-29 9:39 ` [PATCH net-next v13 03/14] net: Make dev_get_hwtstamp_phylib accessible Kory Maincent
2024-05-29 9:39 ` [PATCH net-next v13 04/14] net: Make net_hwtstamp_validate accessible Kory Maincent
2024-05-29 9:39 ` [PATCH net-next v13 05/14] net: Change the API of PHY default timestamp to MAC Kory Maincent
2024-05-29 9:39 ` [PATCH net-next v13 06/14] net: net_tstamp: Add unspec field to hwtstamp_source enumeration Kory Maincent
2024-05-29 9:39 ` [PATCH net-next v13 07/14] net: Add struct kernel_ethtool_ts_info Kory Maincent
2024-05-29 9:39 ` [PATCH net-next v13 08/14] ptp: Add phc source and helpers to register specific PTP clock or get information Kory Maincent
2024-05-29 9:39 ` [PATCH net-next v13 09/14] net: Add the possibility to support a selected hwtstamp in netdevice Kory Maincent
2024-05-29 15:21 ` Jakub Kicinski
2024-05-29 15:50 ` Kory Maincent
2024-05-29 16:05 ` Thomas Petazzoni
2024-05-30 8:39 ` Kory Maincent
2024-05-29 9:39 ` [PATCH net-next v13 10/14] net: netdevsim: ptp_mock: Convert to netdev_ptp_clock_register Kory Maincent
2024-05-29 9:39 ` [PATCH net-next v13 11/14] net: macb: " Kory Maincent
2024-05-29 9:39 ` [PATCH net-next v13 12/14] net: ptp: Move ptp_clock_index() to builtin symbol Kory Maincent
2024-05-30 11:23 ` Sai Krishna Gajula
2024-05-30 12:53 ` Kory Maincent
2024-05-30 15:45 ` Jakub Kicinski
2024-05-29 9:39 ` [PATCH net-next v13 13/14] net: ethtool: tsinfo: Add support for hwtstamp provider and get/set hwtstamp config Kory Maincent
2024-05-29 9:39 ` Kory Maincent [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20240529-feature_ptp_netnext-v13-14-6eda4d40fa4f@bootlin.com \
--to=kory.maincent@bootlin.com \
--cc=UNGLinuxDriver@microchip.com \
--cc=andrew@lunn.ch \
--cc=andy@greyhouse.net \
--cc=bcm-kernel-feedback-list@broadcom.com \
--cc=claudiu.beznea@tuxon.dev \
--cc=corbet@lwn.net \
--cc=davem@davemloft.net \
--cc=edumazet@google.com \
--cc=florian.fainelli@broadcom.com \
--cc=hkallweit1@gmail.com \
--cc=horatiu.vultur@microchip.com \
--cc=horms@kernel.org \
--cc=j.vosburgh@gmail.com \
--cc=kuba@kernel.org \
--cc=linux-doc@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux@armlinux.org.uk \
--cc=maxime.chevallier@bootlin.com \
--cc=netdev@vger.kernel.org \
--cc=nicolas.ferre@microchip.com \
--cc=pabeni@redhat.com \
--cc=radu-nicolae.pirea@oss.nxp.com \
--cc=richardcochran@gmail.com \
--cc=rrameshbabu@nvidia.com \
--cc=thomas.petazzoni@bootlin.com \
--cc=vladimir.oltean@nxp.com \
--cc=willemdebruijn.kernel@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).