From: Raju Lakkaraju <Raju.Lakkaraju@microchip.com>
To: <netdev@vger.kernel.org>
Cc: <davem@davemloft.net>, <kuba@kernel.org>,
<linux-kernel@vger.kernel.org>, <bryan.whitehead@microchip.com>,
<andrew@lunn.ch>, <linux@armlinux.org.uk>, <sbauer@blackbox.su>,
<hmehrtens@maxlinear.com>, <lxu@maxlinear.com>,
<hkallweit1@gmail.com>, <edumazet@google.com>,
<pabeni@redhat.com>, <UNGLinuxDriver@microchip.com>
Subject: [PATCH net V3 3/3] net: phy: mxl-gpy: Remove interrupt mask clearing from config_init
Date: Wed, 5 Jun 2024 15:46:11 +0530 [thread overview]
Message-ID: <20240605101611.18791-4-Raju.Lakkaraju@microchip.com> (raw)
In-Reply-To: <20240605101611.18791-1-Raju.Lakkaraju@microchip.com>
When the system resumes from sleep, the phy_init_hw() function invokes
config_init(), which clears all interrupt masks and causes wake events to be
lost in subsequent wake sequences. Remove interrupt mask clearing from
config_init() and preserve relevant masks in config_intr()
Fixes: 7d901a1e878a ("net: phy: add Maxlinear GPY115/21x/24x driver")
Signed-off-by: Raju Lakkaraju <Raju.Lakkaraju@microchip.com>
---
Change List:
------------
V0 -> V3:
- Address the https://lore.kernel.org/lkml/4a565d54-f468-4e32-8a2c-102c1203f72c@lunn.ch/T/
review comments
drivers/net/phy/mxl-gpy.c | 58 +++++++++++++++++++++++++--------------
1 file changed, 38 insertions(+), 20 deletions(-)
diff --git a/drivers/net/phy/mxl-gpy.c b/drivers/net/phy/mxl-gpy.c
index b2d36a3a96f1..e5f8ac4b4604 100644
--- a/drivers/net/phy/mxl-gpy.c
+++ b/drivers/net/phy/mxl-gpy.c
@@ -107,6 +107,7 @@ struct gpy_priv {
u8 fw_major;
u8 fw_minor;
+ u32 wolopts;
/* It takes 3 seconds to fully switch out of loopback mode before
* it can safely re-enter loopback mode. Record the time when
@@ -221,6 +222,15 @@ static int gpy_hwmon_register(struct phy_device *phydev)
}
#endif
+static int gpy_ack_interrupt(struct phy_device *phydev)
+{
+ int ret;
+
+ /* Clear all pending interrupts */
+ ret = phy_read(phydev, PHY_ISTAT);
+ return ret < 0 ? ret : 0;
+}
+
static int gpy_mbox_read(struct phy_device *phydev, u32 addr)
{
struct gpy_priv *priv = phydev->priv;
@@ -262,16 +272,8 @@ static int gpy_mbox_read(struct phy_device *phydev, u32 addr)
static int gpy_config_init(struct phy_device *phydev)
{
- int ret;
-
- /* Mask all interrupts */
- ret = phy_write(phydev, PHY_IMASK, 0);
- if (ret)
- return ret;
-
- /* Clear all pending interrupts */
- ret = phy_read(phydev, PHY_ISTAT);
- return ret < 0 ? ret : 0;
+ /* Nothing to configure. Configuration Requirement Placeholder */
+ return 0;
}
static int gpy21x_config_init(struct phy_device *phydev)
@@ -627,11 +629,23 @@ static int gpy_read_status(struct phy_device *phydev)
static int gpy_config_intr(struct phy_device *phydev)
{
+ struct gpy_priv *priv = phydev->priv;
u16 mask = 0;
+ int ret;
+
+ ret = gpy_ack_interrupt(phydev);
+ if (ret)
+ return ret;
if (phydev->interrupts == PHY_INTERRUPT_ENABLED)
mask = PHY_IMASK_MASK;
+ if (priv->wolopts & WAKE_MAGIC)
+ mask |= PHY_IMASK_WOL;
+
+ if (priv->wolopts & WAKE_PHY)
+ mask |= PHY_IMASK_LSTC;
+
return phy_write(phydev, PHY_IMASK, mask);
}
@@ -678,6 +692,7 @@ static int gpy_set_wol(struct phy_device *phydev,
struct ethtool_wolinfo *wol)
{
struct net_device *attach_dev = phydev->attached_dev;
+ struct gpy_priv *priv = phydev->priv;
int ret;
if (wol->wolopts & WAKE_MAGIC) {
@@ -725,6 +740,8 @@ static int gpy_set_wol(struct phy_device *phydev,
ret = phy_read(phydev, PHY_ISTAT);
if (ret < 0)
return ret;
+
+ priv->wolopts |= WAKE_MAGIC;
} else {
/* Disable magic packet matching */
ret = phy_clear_bits_mmd(phydev, MDIO_MMD_VEND2,
@@ -732,6 +749,13 @@ static int gpy_set_wol(struct phy_device *phydev,
WOL_EN);
if (ret < 0)
return ret;
+
+ /* Disable the WOL interrupt */
+ ret = phy_clear_bits(phydev, PHY_IMASK, PHY_IMASK_WOL);
+ if (ret < 0)
+ return ret;
+
+ priv->wolopts &= ~WAKE_MAGIC;
}
if (wol->wolopts & WAKE_PHY) {
@@ -748,9 +772,11 @@ static int gpy_set_wol(struct phy_device *phydev,
if (ret & (PHY_IMASK_MASK & ~PHY_IMASK_LSTC))
phy_trigger_machine(phydev);
+ priv->wolopts |= WAKE_PHY;
return 0;
}
+ priv->wolopts &= ~WAKE_PHY;
/* Disable the link state change interrupt */
return phy_clear_bits(phydev, PHY_IMASK, PHY_IMASK_LSTC);
}
@@ -758,18 +784,10 @@ static int gpy_set_wol(struct phy_device *phydev,
static void gpy_get_wol(struct phy_device *phydev,
struct ethtool_wolinfo *wol)
{
- int ret;
+ struct gpy_priv *priv = phydev->priv;
wol->supported = WAKE_MAGIC | WAKE_PHY;
- wol->wolopts = 0;
-
- ret = phy_read_mmd(phydev, MDIO_MMD_VEND2, VPSPEC2_WOL_CTL);
- if (ret & WOL_EN)
- wol->wolopts |= WAKE_MAGIC;
-
- ret = phy_read(phydev, PHY_IMASK);
- if (ret & PHY_IMASK_LSTC)
- wol->wolopts |= WAKE_PHY;
+ wol->wolopts = priv->wolopts;
}
static int gpy_loopback(struct phy_device *phydev, bool enable)
--
2.34.1
next prev parent reply other threads:[~2024-06-05 10:19 UTC|newest]
Thread overview: 21+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-06-05 10:16 [PATCH net V3 0/3] net: lan743x: Fixes for multiple WOL related issues Raju Lakkaraju
2024-06-05 10:16 ` [PATCH net V3 1/3] net: lan743x: disable WOL upon resume to restore full data path operation Raju Lakkaraju
2024-06-05 11:18 ` Wojciech Drewek
2024-06-05 10:16 ` [PATCH net V3 2/3] net: lan743x: Support WOL at both the PHY and MAC appropriately Raju Lakkaraju
2024-06-05 11:20 ` Wojciech Drewek
2024-06-05 14:56 ` kernel test robot
2024-06-06 10:22 ` Raju Lakkaraju
2024-06-06 13:30 ` Andrew Lunn
2024-06-07 6:46 ` Raju Lakkaraju
2024-06-11 6:27 ` [PATCH net V3 0/3] net: lan743x: Fixes for multiple WOL related issues Raju Lakkaraju
2024-06-11 6:27 ` [PATCH net V3 1/3] net: lan743x: disable WOL upon resume to restore full data path operation Raju Lakkaraju
2024-06-11 6:27 ` [PATCH net V3 2/3] net: lan743x: Support WOL at both the PHY and MAC appropriately Raju Lakkaraju
2024-06-11 6:27 ` [PATCH net V3 3/3] net: phy: mxl-gpy: Remove interrupt mask clearing from config_init Raju Lakkaraju
2024-06-11 7:10 ` [PATCH net V3 0/3] net: lan743x: Fixes for multiple WOL related issues Horatiu Vultur
2024-06-11 8:01 ` Raju Lakkaraju
2024-06-11 10:45 ` Horatiu Vultur
2024-06-05 22:25 ` [PATCH net V3 2/3] net: lan743x: Support WOL at both the PHY and MAC appropriately kernel test robot
2024-06-06 10:30 ` Raju Lakkaraju
2024-06-05 10:16 ` Raju Lakkaraju [this message]
2024-06-05 11:24 ` [PATCH net V3 3/3] net: phy: mxl-gpy: Remove interrupt mask clearing from config_init Wojciech Drewek
2024-06-06 6:41 ` Raju Lakkaraju
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20240605101611.18791-4-Raju.Lakkaraju@microchip.com \
--to=raju.lakkaraju@microchip.com \
--cc=UNGLinuxDriver@microchip.com \
--cc=andrew@lunn.ch \
--cc=bryan.whitehead@microchip.com \
--cc=davem@davemloft.net \
--cc=edumazet@google.com \
--cc=hkallweit1@gmail.com \
--cc=hmehrtens@maxlinear.com \
--cc=kuba@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux@armlinux.org.uk \
--cc=lxu@maxlinear.com \
--cc=netdev@vger.kernel.org \
--cc=pabeni@redhat.com \
--cc=sbauer@blackbox.su \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).