[PATCH net-next v3 0/2] Fix changing DSA conduit

[PATCH net-next v3 0/2] Fix changing DSA conduit

[Marek Behún]

This series fixes an issue in the DSA code related to host interface UC
address installed into port FDB and port conduit address database when
live-changing port conduit.

The first patch refactores/deduplicates the installation/uninstallation
of the interface's MAC address and the second patch fixes the issue.

Cover letter for v1 and v2:
  https://patchwork.kernel.org/project/netdevbpf/cover/20240429163627.16031-1-kabel@kernel.org/
  https://patchwork.kernel.org/project/netdevbpf/cover/20240502122922.28139-1-kabel@kernel.org/

Marek Behún (2):
  net: dsa: deduplicate code adding / deleting the port address to fdb
  net: dsa: update the unicast MAC address when changing conduit

 net/dsa/port.c | 40 +++++++++++++++++++++
 net/dsa/user.c | 97 ++++++++++++++++++++++++--------------------------
 net/dsa/user.h |  2 ++
 3 files changed, 89 insertions(+), 50 deletions(-)

-- 
2.43.2

[PATCH net-next v3 1/2] net: dsa: deduplicate code adding / deleting the port address to fdb

[Marek Behún]

The sequence
  if (dsa_switch_supports_uc_filtering(ds))
    dsa_port_standalone_host_fdb_add(dp, addr, 0);
  if (!ether_addr_equal(addr, conduit->dev_addr))
    dev_uc_add(conduit, addr);
is executed both in dsa_user_open() and dsa_user_set_mac_addr().

Its reverse is executed both in dsa_user_close() and
dsa_user_set_mac_addr().

Refactor these sequences into new functions dsa_user_host_uc_install()
and dsa_user_host_uc_uninstall().

Signed-off-by: Marek Behún <kabel@kernel.org>
---
 net/dsa/user.c | 91 ++++++++++++++++++++++++++------------------------
 1 file changed, 47 insertions(+), 44 deletions(-)

diff --git a/net/dsa/user.c b/net/dsa/user.c
index 867c5fe9a4da..efbb34c711cb 100644
--- a/net/dsa/user.c
+++ b/net/dsa/user.c
@@ -355,60 +355,82 @@ static int dsa_user_get_iflink(const struct net_device *dev)
 	return READ_ONCE(dsa_user_to_conduit(dev)->ifindex);
 }
 
-static int dsa_user_open(struct net_device *dev)
+static int dsa_user_host_uc_install(struct net_device *dev, const u8 *addr)
 {
 	struct net_device *conduit = dsa_user_to_conduit(dev);
 	struct dsa_port *dp = dsa_user_to_port(dev);
 	struct dsa_switch *ds = dp->ds;
 	int err;
 
-	err = dev_open(conduit, NULL);
-	if (err < 0) {
-		netdev_err(dev, "failed to open conduit %s\n", conduit->name);
-		goto out;
-	}
-
 	if (dsa_switch_supports_uc_filtering(ds)) {
-		err = dsa_port_standalone_host_fdb_add(dp, dev->dev_addr, 0);
+		err = dsa_port_standalone_host_fdb_add(dp, addr, 0);
 		if (err)
 			goto out;
 	}
 
-	if (!ether_addr_equal(dev->dev_addr, conduit->dev_addr)) {
-		err = dev_uc_add(conduit, dev->dev_addr);
+	if (!ether_addr_equal(addr, conduit->dev_addr)) {
+		err = dev_uc_add(conduit, addr);
 		if (err < 0)
 			goto del_host_addr;
 	}
 
-	err = dsa_port_enable_rt(dp, dev->phydev);
-	if (err)
-		goto del_unicast;
-
 	return 0;
 
-del_unicast:
-	if (!ether_addr_equal(dev->dev_addr, conduit->dev_addr))
-		dev_uc_del(conduit, dev->dev_addr);
 del_host_addr:
 	if (dsa_switch_supports_uc_filtering(ds))
-		dsa_port_standalone_host_fdb_del(dp, dev->dev_addr, 0);
+		dsa_port_standalone_host_fdb_del(dp, addr, 0);
 out:
 	return err;
 }
 
-static int dsa_user_close(struct net_device *dev)
+static void dsa_user_host_uc_uninstall(struct net_device *dev)
 {
 	struct net_device *conduit = dsa_user_to_conduit(dev);
 	struct dsa_port *dp = dsa_user_to_port(dev);
 	struct dsa_switch *ds = dp->ds;
 
-	dsa_port_disable_rt(dp);
-
 	if (!ether_addr_equal(dev->dev_addr, conduit->dev_addr))
 		dev_uc_del(conduit, dev->dev_addr);
 
 	if (dsa_switch_supports_uc_filtering(ds))
 		dsa_port_standalone_host_fdb_del(dp, dev->dev_addr, 0);
+}
+
+static int dsa_user_open(struct net_device *dev)
+{
+	struct net_device *conduit = dsa_user_to_conduit(dev);
+	struct dsa_port *dp = dsa_user_to_port(dev);
+	int err;
+
+	err = dev_open(conduit, NULL);
+	if (err < 0) {
+		netdev_err(dev, "failed to open conduit %s\n", conduit->name);
+		goto out;
+	}
+
+	err = dsa_user_host_uc_install(dev, dev->dev_addr);
+	if (err)
+		goto out;
+
+	err = dsa_port_enable_rt(dp, dev->phydev);
+	if (err)
+		goto out_del_host_uc;
+
+	return 0;
+
+out_del_host_uc:
+	dsa_user_host_uc_uninstall(dev);
+out:
+	return err;
+}
+
+static int dsa_user_close(struct net_device *dev)
+{
+	struct dsa_port *dp = dsa_user_to_port(dev);
+
+	dsa_port_disable_rt(dp);
+
+	dsa_user_host_uc_uninstall(dev);
 
 	return 0;
 }
@@ -448,7 +470,6 @@ static void dsa_user_set_rx_mode(struct net_device *dev)
 
 static int dsa_user_set_mac_address(struct net_device *dev, void *a)
 {
-	struct net_device *conduit = dsa_user_to_conduit(dev);
 	struct dsa_port *dp = dsa_user_to_port(dev);
 	struct dsa_switch *ds = dp->ds;
 	struct sockaddr *addr = a;
@@ -470,34 +491,16 @@ static int dsa_user_set_mac_address(struct net_device *dev, void *a)
 	if (!(dev->flags & IFF_UP))
 		goto out_change_dev_addr;
 
-	if (dsa_switch_supports_uc_filtering(ds)) {
-		err = dsa_port_standalone_host_fdb_add(dp, addr->sa_data, 0);
-		if (err)
-			return err;
-	}
-
-	if (!ether_addr_equal(addr->sa_data, conduit->dev_addr)) {
-		err = dev_uc_add(conduit, addr->sa_data);
-		if (err < 0)
-			goto del_unicast;
-	}
-
-	if (!ether_addr_equal(dev->dev_addr, conduit->dev_addr))
-		dev_uc_del(conduit, dev->dev_addr);
+	err = dsa_user_host_uc_install(dev, addr->sa_data);
+	if (err)
+		return err;
 
-	if (dsa_switch_supports_uc_filtering(ds))
-		dsa_port_standalone_host_fdb_del(dp, dev->dev_addr, 0);
+	dsa_user_host_uc_uninstall(dev);
 
 out_change_dev_addr:
 	eth_hw_addr_set(dev, addr->sa_data);
 
 	return 0;
-
-del_unicast:
-	if (dsa_switch_supports_uc_filtering(ds))
-		dsa_port_standalone_host_fdb_del(dp, addr->sa_data, 0);
-
-	return err;
 }
 
 struct dsa_user_dump_ctx {
-- 
2.43.2

[PATCH net-next v3 2/2] net: dsa: update the unicast MAC address when changing conduit

[Marek Behún]

When changing DSA user interface conduit while the user interface is up,
DSA exhibits different behavior in comparison to when the interface is
down. This different behavior concerns the primary unicast MAC address
stored in the port standalone FDB and in the conduit device UC database.

If we put a switch port down while changing the conduit with
  ip link set sw0p0 down
  ip link set sw0p0 type dsa conduit conduit1
  ip link set sw0p0 up
we delete the address in dsa_user_close() and install the (possibly
different) address in dsa_user_open().

But when changing the conduit on the fly, the old address is not
deleted and the new one is not installed.

Since we explicitly want to support live-changing the conduit, uninstall
the old address before calling dsa_port_assign_conduit() and install the
(possibly different) new address after the call.

Because conduit change might also trigger address change (the user
interface is supposed to inherit the conduit interface MAC address if no
address is defined in hardware (dp->mac is a zero address)), move the
eth_hw_addr_inherit() call from dsa_user_change_conduit() to
dsa_port_change_conduit(), just before installing the new address.

Although this is in theory a flaw in DSA core, it needs not be
backported, since there is currently no DSA driver that can be affected
by this. The only DSA driver that supports changing conduit is felix,
and, as explained by Vladimir Oltean [1]:

  There are 2 reasons why with felix the bug does not manifest itself.

  First is because both the 'ocelot' and the alternate 'ocelot-8021q'
  tagging protocols have the 'promisc_on_conduit = true' flag. So the
  unicast address doesn't have to be in the conduit's RX filter -
  neither the old or the new conduit.

  Second, dsa_user_host_uc_install() theoretically leaves behind host
  FDB entries installed towards the wrong (old) CPU port. But in
  felix_fdb_add(), we treat any FDB entry requested towards any CPU port
  as if it was a multicast FDB entry programmed towards _all_ CPU ports.
  For that reason, it is installed towards the port mask of the PGID_CPU
  port group ID:

	if (dsa_port_is_cpu(dp))
		port = PGID_CPU;

Therefore no Fixes tag for this change.

[1] https://lore.kernel.org/netdev/20240507201827.47suw4fwcjrbungy@skbuf/
Signed-off-by: Marek Behún <kabel@kernel.org>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Tested-by: Vladimir Oltean <olteanv@gmail.com>
---
 net/dsa/port.c | 40 ++++++++++++++++++++++++++++++++++++++++
 net/dsa/user.c | 10 ++--------
 net/dsa/user.h |  2 ++
 3 files changed, 44 insertions(+), 8 deletions(-)

diff --git a/net/dsa/port.c b/net/dsa/port.c
index 9a249d4ac3a5..961b2dc84512 100644
--- a/net/dsa/port.c
+++ b/net/dsa/port.c
@@ -1467,10 +1467,34 @@ int dsa_port_change_conduit(struct dsa_port *dp, struct net_device *conduit,
 	 */
 	dsa_user_unsync_ha(dev);
 
+	/* If live-changing, we also need to uninstall the user device address
+	 * from the port FDB and the conduit interface.
+	 */
+	if (dev->flags & IFF_UP)
+		dsa_user_host_uc_uninstall(dev);
+
 	err = dsa_port_assign_conduit(dp, conduit, extack, true);
 	if (err)
 		goto rewind_old_addrs;
 
+	/* If the port doesn't have its own MAC address and relies on the DSA
+	 * conduit's one, inherit it again from the new DSA conduit.
+	 */
+	if (is_zero_ether_addr(dp->mac))
+		eth_hw_addr_inherit(dev, conduit);
+
+	/* If live-changing, we need to install the user device address to the
+	 * port FDB and the conduit interface.
+	 */
+	if (dev->flags & IFF_UP) {
+		err = dsa_user_host_uc_install(dev, dev->dev_addr);
+		if (err) {
+			NL_SET_ERR_MSG_MOD(extack,
+					   "Failed to install host UC address");
+			goto rewind_addr_inherit;
+		}
+	}
+
 	dsa_user_sync_ha(dev);
 
 	if (vlan_filtering) {
@@ -1500,10 +1524,26 @@ int dsa_port_change_conduit(struct dsa_port *dp, struct net_device *conduit,
 rewind_new_addrs:
 	dsa_user_unsync_ha(dev);
 
+	if (dev->flags & IFF_UP)
+		dsa_user_host_uc_uninstall(dev);
+
+rewind_addr_inherit:
+	if (is_zero_ether_addr(dp->mac))
+		eth_hw_addr_inherit(dev, old_conduit);
+
 	dsa_port_assign_conduit(dp, old_conduit, NULL, false);
 
 /* Restore the objects on the old CPU port */
 rewind_old_addrs:
+	if (dev->flags & IFF_UP) {
+		tmp = dsa_user_host_uc_install(dev, dev->dev_addr);
+		if (tmp) {
+			dev_err(ds->dev,
+				"port %d failed to restore host UC address: %pe\n",
+				dp->index, ERR_PTR(tmp));
+		}
+	}
+
 	dsa_user_sync_ha(dev);
 
 	if (vlan_filtering) {
diff --git a/net/dsa/user.c b/net/dsa/user.c
index efbb34c711cb..e8f56a40b614 100644
--- a/net/dsa/user.c
+++ b/net/dsa/user.c
@@ -355,7 +355,7 @@ static int dsa_user_get_iflink(const struct net_device *dev)
 	return READ_ONCE(dsa_user_to_conduit(dev)->ifindex);
 }
 
-static int dsa_user_host_uc_install(struct net_device *dev, const u8 *addr)
+int dsa_user_host_uc_install(struct net_device *dev, const u8 *addr)
 {
 	struct net_device *conduit = dsa_user_to_conduit(dev);
 	struct dsa_port *dp = dsa_user_to_port(dev);
@@ -383,7 +383,7 @@ static int dsa_user_host_uc_install(struct net_device *dev, const u8 *addr)
 	return err;
 }
 
-static void dsa_user_host_uc_uninstall(struct net_device *dev)
+void dsa_user_host_uc_uninstall(struct net_device *dev)
 {
 	struct net_device *conduit = dsa_user_to_conduit(dev);
 	struct dsa_port *dp = dsa_user_to_port(dev);
@@ -2882,12 +2882,6 @@ int dsa_user_change_conduit(struct net_device *dev, struct net_device *conduit,
 			    ERR_PTR(err));
 	}
 
-	/* If the port doesn't have its own MAC address and relies on the DSA
-	 * conduit's one, inherit it again from the new DSA conduit.
-	 */
-	if (is_zero_ether_addr(dp->mac))
-		eth_hw_addr_inherit(dev, conduit);
-
 	return 0;
 
 out_revert_conduit_link:
diff --git a/net/dsa/user.h b/net/dsa/user.h
index 996069130bea..016884bead3c 100644
--- a/net/dsa/user.h
+++ b/net/dsa/user.h
@@ -42,6 +42,8 @@ int dsa_user_suspend(struct net_device *user_dev);
 int dsa_user_resume(struct net_device *user_dev);
 int dsa_user_register_notifier(void);
 void dsa_user_unregister_notifier(void);
+int dsa_user_host_uc_install(struct net_device *dev, const u8 *addr);
+void dsa_user_host_uc_uninstall(struct net_device *dev);
 void dsa_user_sync_ha(struct net_device *dev);
 void dsa_user_unsync_ha(struct net_device *dev);
 void dsa_user_setup_tagger(struct net_device *user);
-- 
2.43.2

Re: [PATCH net-next v3 1/2] net: dsa: deduplicate code adding / deleting the port address to fdb

[Vladimir Oltean]

On Wed, Jun 05, 2024 at 03:33:28PM +0200, Marek Behún wrote:
> The sequence
>   if (dsa_switch_supports_uc_filtering(ds))
>     dsa_port_standalone_host_fdb_add(dp, addr, 0);
>   if (!ether_addr_equal(addr, conduit->dev_addr))
>     dev_uc_add(conduit, addr);
> is executed both in dsa_user_open() and dsa_user_set_mac_addr().
> 
> Its reverse is executed both in dsa_user_close() and
> dsa_user_set_mac_addr().
> 
> Refactor these sequences into new functions dsa_user_host_uc_install()
> and dsa_user_host_uc_uninstall().
> 
> Signed-off-by: Marek Behún <kabel@kernel.org>
> ---

Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>

Re: [PATCH net-next v3 0/2] Fix changing DSA conduit

[patchwork-bot+netdevbpf]

Hello:

This series was applied to netdev/net-next.git (main)
by David S. Miller <davem@davemloft.net>:

On Wed,  5 Jun 2024 15:33:27 +0200 you wrote:
> This series fixes an issue in the DSA code related to host interface UC
> address installed into port FDB and port conduit address database when
> live-changing port conduit.
> 
> The first patch refactores/deduplicates the installation/uninstallation
> of the interface's MAC address and the second patch fixes the issue.
> 
> [...]

Here is the summary with links:
  - [net-next,v3,1/2] net: dsa: deduplicate code adding / deleting the port address to fdb
    https://git.kernel.org/netdev/net-next/c/77f7541248fc
  - [net-next,v3,2/2] net: dsa: update the unicast MAC address when changing conduit
    https://git.kernel.org/netdev/net-next/c/eef8e906aea2

You are awesome, thank you!
-- 
Deet-doot-dot, I am a bot.
https://korg.docs.kernel.org/patchwork/pwbot.html