* RTL8125B on r8169 no traffic
@ 2024-06-04 12:38 Andrey Tumashinov
2024-06-06 0:23 ` Jakub Kicinski
0 siblings, 1 reply; 2+ messages in thread
From: Andrey Tumashinov @ 2024-06-04 12:38 UTC (permalink / raw)
To: netdev
Hello,
I'm having some strange connect-reconnect problems with my built-in NIC
on RTL8125, Gigabyte Z690 Gaming X DDR4 running Manjaro, 6.9.2 kernel.
1. I have to plug the cable in several random times in order to NIC get
it's IP address via DHCP. Manual IP doesn't help either. The cable is
Cat 5e, verified with several other laptops.
2. When the NIC is linked and then link is downed and then upped on the
other side, it won't get IP address, too. I have to use the following
commands in order to get IP address and start traffic:
ip link set enp3s0 down
ip link set enp3s0 up
3. Other than that, there are no problems at all - connection speed is
stable 1 Gbit, after PC reboot connection is always on, IP address ok,
traffic flows as it should.
4. Recently, I've stumbled upon this thread which I think is similar to
my problem but It should have been resolved in my kernel version:
https://lore.kernel.org/netdev/97ec2232-3257-316c-c3e7-a08192ce16a6@gmail.com/T/
Do you have any ideas what's wrong?
^ permalink raw reply [flat|nested] 2+ messages in thread
* Re: RTL8125B on r8169 no traffic
2024-06-04 12:38 RTL8125B on r8169 no traffic Andrey Tumashinov
@ 2024-06-06 0:23 ` Jakub Kicinski
0 siblings, 0 replies; 2+ messages in thread
From: Jakub Kicinski @ 2024-06-06 0:23 UTC (permalink / raw)
To: Andrey Tumashinov; +Cc: netdev, Heiner Kallweit
On Tue, 4 Jun 2024 17:38:30 +0500 Andrey Tumashinov wrote:
> Hello,
>
> I'm having some strange connect-reconnect problems with my built-in NIC
> on RTL8125, Gigabyte Z690 Gaming X DDR4 running Manjaro, 6.9.2 kernel.
>
> 1. I have to plug the cable in several random times in order to NIC get
> it's IP address via DHCP. Manual IP doesn't help either. The cable is
> Cat 5e, verified with several other laptops.
>
> 2. When the NIC is linked and then link is downed and then upped on the
> other side, it won't get IP address, too. I have to use the following
> commands in order to get IP address and start traffic:
>
> ip link set enp3s0 down
> ip link set enp3s0 up
>
>
> 3. Other than that, there are no problems at all - connection speed is
> stable 1 Gbit, after PC reboot connection is always on, IP address ok,
> traffic flows as it should.
>
> 4. Recently, I've stumbled upon this thread which I think is similar to
> my problem but It should have been resolved in my kernel version:
>
> https://lore.kernel.org/netdev/97ec2232-3257-316c-c3e7-a08192ce16a6@gmail.com/T/
>
> Do you have any ideas what's wrong?
Shot in the dark - could you check / disable EEE
(ethtool --show-eee $ifc) ?
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2024-06-06 0:23 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2024-06-04 12:38 RTL8125B on r8169 no traffic Andrey Tumashinov
2024-06-06 0:23 ` Jakub Kicinski
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).