From: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
To: intel-wired-lan@lists.osuosl.org
Cc: netdev@vger.kernel.org, jacob.e.keller@intel.com,
michal.kubiak@intel.com, maciej.fijalkowski@intel.com,
sridhar.samudrala@intel.com, przemyslaw.kitszel@intel.com,
wojciech.drewek@intel.com, pio.raczynski@gmail.com,
jiri@nvidia.com, mateusz.polchlopek@intel.com, shayd@nvidia.com,
kuba@kernel.org
Subject: [iwl-next v3 3/4] ice: move VSI configuration outside repr setup
Date: Mon, 10 Jun 2024 09:44:33 +0200 [thread overview]
Message-ID: <20240610074434.1962735-4-michal.swiatkowski@linux.intel.com> (raw)
In-Reply-To: <20240610074434.1962735-1-michal.swiatkowski@linux.intel.com>
It is needed because subfunction port representor shouldn't configure
the source VSI during representor creation.
Move the code to separate function and call it only in case the VF port
representor is being created.
Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
---
drivers/net/ethernet/intel/ice/ice_eswitch.c | 55 ++++++++++++++------
drivers/net/ethernet/intel/ice/ice_eswitch.h | 10 ++++
drivers/net/ethernet/intel/ice/ice_repr.c | 7 +++
3 files changed, 57 insertions(+), 15 deletions(-)
diff --git a/drivers/net/ethernet/intel/ice/ice_eswitch.c b/drivers/net/ethernet/intel/ice/ice_eswitch.c
index 7b57a6561a5a..3f73f46111fc 100644
--- a/drivers/net/ethernet/intel/ice/ice_eswitch.c
+++ b/drivers/net/ethernet/intel/ice/ice_eswitch.c
@@ -117,17 +117,10 @@ static int ice_eswitch_setup_repr(struct ice_pf *pf, struct ice_repr *repr)
struct ice_vsi *vsi = repr->src_vsi;
struct metadata_dst *dst;
- ice_remove_vsi_fltr(&pf->hw, vsi->idx);
repr->dst = metadata_dst_alloc(0, METADATA_HW_PORT_MUX,
GFP_KERNEL);
if (!repr->dst)
- goto err_add_mac_fltr;
-
- if (ice_vsi_update_security(vsi, ice_vsi_ctx_clear_antispoof))
- goto err_dst_free;
-
- if (ice_vsi_add_vlan_zero(vsi))
- goto err_update_security;
+ return -ENOMEM;
netif_keep_dst(uplink_vsi->netdev);
@@ -136,16 +129,48 @@ static int ice_eswitch_setup_repr(struct ice_pf *pf, struct ice_repr *repr)
dst->u.port_info.lower_dev = uplink_vsi->netdev;
return 0;
+}
-err_update_security:
+/**
+ * ice_eswitch_cfg_vsi - configure VSI to work in slow-path
+ * @vsi: VSI structure of representee
+ * @mac: representee MAC
+ *
+ * Return: 0 on success, non-zero on error.
+ */
+int ice_eswitch_cfg_vsi(struct ice_vsi *vsi, const u8 *mac)
+{
+ int err;
+
+ ice_remove_vsi_fltr(&vsi->back->hw, vsi->idx);
+
+ err = ice_vsi_update_security(vsi, ice_vsi_ctx_clear_antispoof);
+ if (err)
+ goto err_update_security;
+
+ err = ice_vsi_add_vlan_zero(vsi);
+ if (err)
+ goto err_vlan_zero;
+
+ return 0;
+
+err_vlan_zero:
ice_vsi_update_security(vsi, ice_vsi_ctx_set_antispoof);
-err_dst_free:
- metadata_dst_free(repr->dst);
- repr->dst = NULL;
-err_add_mac_fltr:
- ice_fltr_add_mac_and_broadcast(vsi, repr->parent_mac, ICE_FWD_TO_VSI);
+err_update_security:
+ ice_fltr_add_mac_and_broadcast(vsi, mac, ICE_FWD_TO_VSI);
- return -ENODEV;
+ return err;
+}
+
+/**
+ * ice_eswitch_decfg_vsi - unroll changes done to VSI for switchdev
+ * @vsi: VSI structure of representee
+ * @mac: representee MAC
+ */
+void ice_eswitch_decfg_vsi(struct ice_vsi *vsi, const u8 *mac)
+{
+ ice_vsi_update_security(vsi, ice_vsi_ctx_set_antispoof);
+ ice_fltr_add_mac_and_broadcast(vsi, mac, ICE_FWD_TO_VSI);
}
/**
diff --git a/drivers/net/ethernet/intel/ice/ice_eswitch.h b/drivers/net/ethernet/intel/ice/ice_eswitch.h
index e2e5c0c75e7d..9a25606e9740 100644
--- a/drivers/net/ethernet/intel/ice/ice_eswitch.h
+++ b/drivers/net/ethernet/intel/ice/ice_eswitch.h
@@ -28,6 +28,9 @@ netdev_tx_t
ice_eswitch_port_start_xmit(struct sk_buff *skb, struct net_device *netdev);
struct net_device *ice_eswitch_get_target(struct ice_rx_ring *rx_ring,
union ice_32b_rx_flex_desc *rx_desc);
+
+int ice_eswitch_cfg_vsi(struct ice_vsi *vsi, const u8 *mac);
+void ice_eswitch_decfg_vsi(struct ice_vsi *vsi, const u8 *mac);
#else /* CONFIG_ICE_SWITCHDEV */
static inline void ice_eswitch_detach(struct ice_pf *pf, struct ice_vf *vf) { }
@@ -85,5 +88,12 @@ ice_eswitch_get_target(struct ice_rx_ring *rx_ring,
{
return rx_ring->netdev;
}
+
+static inline int ice_eswitch_cfg_vsi(struct ice_vsi *vsi, const u8 *mac)
+{
+ return -EOPNOTSUPP;
+}
+
+static inline void ice_eswitch_decfg_vsi(struct ice_vsi *vsi, const u8 *mac) { }
#endif /* CONFIG_ICE_SWITCHDEV */
#endif /* _ICE_ESWITCH_H_ */
diff --git a/drivers/net/ethernet/intel/ice/ice_repr.c b/drivers/net/ethernet/intel/ice/ice_repr.c
index 35a6ac8c0466..bdda3401e343 100644
--- a/drivers/net/ethernet/intel/ice/ice_repr.c
+++ b/drivers/net/ethernet/intel/ice/ice_repr.c
@@ -306,6 +306,7 @@ static void ice_repr_rem(struct ice_repr *repr)
void ice_repr_rem_vf(struct ice_repr *repr)
{
ice_repr_remove_node(&repr->vf->devlink_port);
+ ice_eswitch_decfg_vsi(repr->src_vsi, repr->parent_mac);
unregister_netdev(repr->netdev);
ice_devlink_destroy_vf_port(repr->vf);
ice_virtchnl_set_dflt_ops(repr->vf);
@@ -401,11 +402,17 @@ struct ice_repr *ice_repr_add_vf(struct ice_vf *vf)
if (err)
goto err_netdev;
+ err = ice_eswitch_cfg_vsi(repr->src_vsi, repr->parent_mac);
+ if (err)
+ goto err_cfg_vsi;
+
ice_virtchnl_set_repr_ops(vf);
ice_repr_set_tx_topology(vf->pf);
return repr;
+err_cfg_vsi:
+ unregister_netdev(repr->netdev);
err_netdev:
ice_repr_rem(repr);
err_repr_add:
--
2.42.0
next prev parent reply other threads:[~2024-06-10 7:39 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-06-10 7:44 [iwl-next v3 0/4] ice: prepare representor for SF support Michal Swiatkowski
2024-06-10 7:44 ` [iwl-next v3 1/4] ice: store representor ID in bridge port Michal Swiatkowski
2024-06-14 12:43 ` Simon Horman
2024-06-10 7:44 ` [iwl-next v3 2/4] ice: move devlink locking outside the port creation Michal Swiatkowski
2024-06-14 12:48 ` Simon Horman
2024-06-10 7:44 ` Michal Swiatkowski [this message]
2024-06-14 12:43 ` [iwl-next v3 3/4] ice: move VSI configuration outside repr setup Simon Horman
2024-06-21 4:16 ` Michal Swiatkowski
2024-06-10 7:44 ` [iwl-next v3 4/4] ice: update representor when VSI is ready Michal Swiatkowski
2024-06-14 12:47 ` Simon Horman
2024-06-21 4:32 ` Michal Swiatkowski
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20240610074434.1962735-4-michal.swiatkowski@linux.intel.com \
--to=michal.swiatkowski@linux.intel.com \
--cc=intel-wired-lan@lists.osuosl.org \
--cc=jacob.e.keller@intel.com \
--cc=jiri@nvidia.com \
--cc=kuba@kernel.org \
--cc=maciej.fijalkowski@intel.com \
--cc=mateusz.polchlopek@intel.com \
--cc=michal.kubiak@intel.com \
--cc=netdev@vger.kernel.org \
--cc=pio.raczynski@gmail.com \
--cc=przemyslaw.kitszel@intel.com \
--cc=shayd@nvidia.com \
--cc=sridhar.samudrala@intel.com \
--cc=wojciech.drewek@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).