From: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
To: intel-wired-lan@lists.osuosl.org
Cc: netdev@vger.kernel.org, jacob.e.keller@intel.com,
michal.kubiak@intel.com, maciej.fijalkowski@intel.com,
sridhar.samudrala@intel.com, przemyslaw.kitszel@intel.com,
wojciech.drewek@intel.com, pio.raczynski@gmail.com,
jiri@nvidia.com, mateusz.polchlopek@intel.com, shayd@nvidia.com,
kuba@kernel.org
Subject: [iwl-next v3 4/4] ice: update representor when VSI is ready
Date: Mon, 10 Jun 2024 09:44:34 +0200 [thread overview]
Message-ID: <20240610074434.1962735-5-michal.swiatkowski@linux.intel.com> (raw)
In-Reply-To: <20240610074434.1962735-1-michal.swiatkowski@linux.intel.com>
In case of reset of VF VSI can be reallocated. To handle this case it
should be properly updated.
Reload representor as vsi->vsi_num can be different than the one stored
when representor was created.
Instead of only changing antispoof do whole VSI configuration for
eswitch.
Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
---
drivers/net/ethernet/intel/ice/ice_eswitch.c | 21 +++++++++++++-------
drivers/net/ethernet/intel/ice/ice_eswitch.h | 4 ++--
drivers/net/ethernet/intel/ice/ice_vf_lib.c | 2 +-
3 files changed, 17 insertions(+), 10 deletions(-)
diff --git a/drivers/net/ethernet/intel/ice/ice_eswitch.c b/drivers/net/ethernet/intel/ice/ice_eswitch.c
index 3f73f46111fc..4f539b1c7781 100644
--- a/drivers/net/ethernet/intel/ice/ice_eswitch.c
+++ b/drivers/net/ethernet/intel/ice/ice_eswitch.c
@@ -178,16 +178,16 @@ void ice_eswitch_decfg_vsi(struct ice_vsi *vsi, const u8 *mac)
* @repr_id: representor ID
* @vsi: VSI for which port representor is configured
*/
-void ice_eswitch_update_repr(unsigned long repr_id, struct ice_vsi *vsi)
+void ice_eswitch_update_repr(unsigned long *repr_id, struct ice_vsi *vsi)
{
struct ice_pf *pf = vsi->back;
struct ice_repr *repr;
- int ret;
+ int err;
if (!ice_is_switchdev_running(pf))
return;
- repr = xa_load(&pf->eswitch.reprs, repr_id);
+ repr = xa_load(&pf->eswitch.reprs, *repr_id);
if (!repr)
return;
@@ -197,12 +197,19 @@ void ice_eswitch_update_repr(unsigned long repr_id, struct ice_vsi *vsi)
if (repr->br_port)
repr->br_port->vsi = vsi;
- ret = ice_vsi_update_security(vsi, ice_vsi_ctx_clear_antispoof);
- if (ret) {
- ice_fltr_add_mac_and_broadcast(vsi, repr->parent_mac,
- ICE_FWD_TO_VSI);
+ err = ice_eswitch_cfg_vsi(vsi, repr->parent_mac);
+ if (err)
dev_err(ice_pf_to_dev(pf), "Failed to update VSI of port representor %d",
repr->id);
+
+ /* The VSI number is different, reload the PR with new id */
+ if (repr->id != vsi->vsi_num) {
+ xa_erase(&pf->eswitch.reprs, repr->id);
+ repr->id = vsi->vsi_num;
+ if (xa_insert(&pf->eswitch.reprs, repr->id, repr, GFP_KERNEL))
+ dev_err(ice_pf_to_dev(pf), "Failed to reload port representor %d",
+ repr->id);
+ *repr_id = repr->id;
}
}
diff --git a/drivers/net/ethernet/intel/ice/ice_eswitch.h b/drivers/net/ethernet/intel/ice/ice_eswitch.h
index 9a25606e9740..09194d514f9b 100644
--- a/drivers/net/ethernet/intel/ice/ice_eswitch.h
+++ b/drivers/net/ethernet/intel/ice/ice_eswitch.h
@@ -18,7 +18,7 @@ ice_eswitch_mode_set(struct devlink *devlink, u16 mode,
struct netlink_ext_ack *extack);
bool ice_is_eswitch_mode_switchdev(struct ice_pf *pf);
-void ice_eswitch_update_repr(unsigned long repr_id, struct ice_vsi *vsi);
+void ice_eswitch_update_repr(unsigned long *repr_id, struct ice_vsi *vsi);
void ice_eswitch_stop_all_tx_queues(struct ice_pf *pf);
@@ -47,7 +47,7 @@ ice_eswitch_set_target_vsi(struct sk_buff *skb,
struct ice_tx_offload_params *off) { }
static inline void
-ice_eswitch_update_repr(unsigned long repr_id, struct ice_vsi *vsi) { }
+ice_eswitch_update_repr(unsigned long *repr_id, struct ice_vsi *vsi) { }
static inline int ice_eswitch_configure(struct ice_pf *pf)
{
diff --git a/drivers/net/ethernet/intel/ice/ice_vf_lib.c b/drivers/net/ethernet/intel/ice/ice_vf_lib.c
index 48a8d462d76a..5635e9da2212 100644
--- a/drivers/net/ethernet/intel/ice/ice_vf_lib.c
+++ b/drivers/net/ethernet/intel/ice/ice_vf_lib.c
@@ -948,7 +948,7 @@ int ice_reset_vf(struct ice_vf *vf, u32 flags)
goto out_unlock;
}
- ice_eswitch_update_repr(vf->repr_id, vsi);
+ ice_eswitch_update_repr(&vf->repr_id, vsi);
/* if the VF has been reset allow it to come up again */
ice_mbx_clear_malvf(&vf->mbx_info);
--
2.42.0
next prev parent reply other threads:[~2024-06-10 7:39 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-06-10 7:44 [iwl-next v3 0/4] ice: prepare representor for SF support Michal Swiatkowski
2024-06-10 7:44 ` [iwl-next v3 1/4] ice: store representor ID in bridge port Michal Swiatkowski
2024-06-14 12:43 ` Simon Horman
2024-06-10 7:44 ` [iwl-next v3 2/4] ice: move devlink locking outside the port creation Michal Swiatkowski
2024-06-14 12:48 ` Simon Horman
2024-06-10 7:44 ` [iwl-next v3 3/4] ice: move VSI configuration outside repr setup Michal Swiatkowski
2024-06-14 12:43 ` Simon Horman
2024-06-21 4:16 ` Michal Swiatkowski
2024-06-10 7:44 ` Michal Swiatkowski [this message]
2024-06-14 12:47 ` [iwl-next v3 4/4] ice: update representor when VSI is ready Simon Horman
2024-06-21 4:32 ` Michal Swiatkowski
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20240610074434.1962735-5-michal.swiatkowski@linux.intel.com \
--to=michal.swiatkowski@linux.intel.com \
--cc=intel-wired-lan@lists.osuosl.org \
--cc=jacob.e.keller@intel.com \
--cc=jiri@nvidia.com \
--cc=kuba@kernel.org \
--cc=maciej.fijalkowski@intel.com \
--cc=mateusz.polchlopek@intel.com \
--cc=michal.kubiak@intel.com \
--cc=netdev@vger.kernel.org \
--cc=pio.raczynski@gmail.com \
--cc=przemyslaw.kitszel@intel.com \
--cc=shayd@nvidia.com \
--cc=sridhar.samudrala@intel.com \
--cc=wojciech.drewek@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).