[PATCH 1/2] dt-bindings: ptp: Convert ptp-qoirq to yaml format

[Frank Li <Frank.Li@nxp.com>]

Convert ptp-qoirq from txt to yaml format.

Additional change:
- Fixed example interrupts proptery to match the least 2 interrupts
requirement.
- Move Reference clock context under clk,sel.
- Interrupts is not required property

Signed-off-by: Frank Li <Frank.Li@nxp.com>
---
 .../devicetree/bindings/ptp/ptp-qoriq.txt          |  87 ------------
 .../devicetree/bindings/ptp/ptp-qoriq.yaml         | 148 +++++++++++++++++++++
 2 files changed, 148 insertions(+), 87 deletions(-)

diff --git a/Documentation/devicetree/bindings/ptp/ptp-qoriq.txt b/Documentation/devicetree/bindings/ptp/ptp-qoriq.txt
deleted file mode 100644
index 743eda754e65c..0000000000000
--- a/Documentation/devicetree/bindings/ptp/ptp-qoriq.txt
+++ /dev/null
@@ -1,87 +0,0 @@
-* Freescale QorIQ 1588 timer based PTP clock
-
-General Properties:
-
-  - compatible   Should be "fsl,etsec-ptp" for eTSEC
-                 Should be "fsl,fman-ptp-timer" for DPAA FMan
-                 Should be "fsl,dpaa2-ptp" for DPAA2
-                 Should be "fsl,enetc-ptp" for ENETC
-  - reg          Offset and length of the register set for the device
-  - interrupts   There should be at least two interrupts. Some devices
-                 have as many as four PTP related interrupts.
-
-Clock Properties:
-
-  - fsl,cksel        Timer reference clock source.
-  - fsl,tclk-period  Timer reference clock period in nanoseconds.
-  - fsl,tmr-prsc     Prescaler, divides the output clock.
-  - fsl,tmr-add      Frequency compensation value.
-  - fsl,tmr-fiper1   Fixed interval period pulse generator.
-  - fsl,tmr-fiper2   Fixed interval period pulse generator.
-  - fsl,tmr-fiper3   Fixed interval period pulse generator.
-                     Supported only on DPAA2 and ENETC hardware.
-  - fsl,max-adj      Maximum frequency adjustment in parts per billion.
-  - fsl,extts-fifo   The presence of this property indicates hardware
-		     support for the external trigger stamp FIFO.
-  - little-endian    The presence of this property indicates the 1588 timer
-		     IP block is little-endian mode. The default endian mode
-		     is big-endian.
-
-  These properties set the operational parameters for the PTP
-  clock. You must choose these carefully for the clock to work right.
-  Here is how to figure good values:
-
-  TimerOsc     = selected reference clock   MHz
-  tclk_period  = desired clock period       nanoseconds
-  NominalFreq  = 1000 / tclk_period         MHz
-  FreqDivRatio = TimerOsc / NominalFreq     (must be greater that 1.0)
-  tmr_add      = ceil(2^32 / FreqDivRatio)
-  OutputClock  = NominalFreq / tmr_prsc     MHz
-  PulseWidth   = 1 / OutputClock            microseconds
-  FiperFreq1   = desired frequency in Hz
-  FiperDiv1    = 1000000 * OutputClock / FiperFreq1
-  tmr_fiper1   = tmr_prsc * tclk_period * FiperDiv1 - tclk_period
-  max_adj      = 1000000000 * (FreqDivRatio - 1.0) - 1
-
-  The calculation for tmr_fiper2 is the same as for tmr_fiper1. The
-  driver expects that tmr_fiper1 will be correctly set to produce a 1
-  Pulse Per Second (PPS) signal, since this will be offered to the PPS
-  subsystem to synchronize the Linux clock.
-
-  Reference clock source is determined by the value, which is holded
-  in CKSEL bits in TMR_CTRL register. "fsl,cksel" property keeps the
-  value, which will be directly written in those bits, that is why,
-  according to reference manual, the next clock sources can be used:
-
-  For eTSEC,
-  <0> - external high precision timer reference clock (TSEC_TMR_CLK
-        input is used for this purpose);
-  <1> - eTSEC system clock;
-  <2> - eTSEC1 transmit clock;
-  <3> - RTC clock input.
-
-  For DPAA FMan,
-  <0> - external high precision timer reference clock (TMR_1588_CLK)
-  <1> - MAC system clock (1/2 FMan clock)
-  <2> - reserved
-  <3> - RTC clock oscillator
-
-  When this attribute is not used, the IEEE 1588 timer reference clock
-  will use the eTSEC system clock (for Gianfar) or the MAC system
-  clock (for DPAA).
-
-Example:
-
-	ptp_clock@24e00 {
-		compatible = "fsl,etsec-ptp";
-		reg = <0x24E00 0xB0>;
-		interrupts = <12 0x8 13 0x8>;
-		interrupt-parent = < &ipic >;
-		fsl,cksel       = <1>;
-		fsl,tclk-period = <10>;
-		fsl,tmr-prsc    = <100>;
-		fsl,tmr-add     = <0x999999A4>;
-		fsl,tmr-fiper1  = <0x3B9AC9F6>;
-		fsl,tmr-fiper2  = <0x00018696>;
-		fsl,max-adj     = <659999998>;
-	};
diff --git a/Documentation/devicetree/bindings/ptp/ptp-qoriq.yaml b/Documentation/devicetree/bindings/ptp/ptp-qoriq.yaml
new file mode 100644
index 0000000000000..585e8bffd90c9
--- /dev/null
+++ b/Documentation/devicetree/bindings/ptp/ptp-qoriq.yaml
@@ -0,0 +1,148 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/ptp/ptp-qoriq.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale QorIQ 1588 timer based PTP clock
+
+maintainers:
+  - Frank Li <Frank.Li@nxp.com>
+
+properties:
+  compatible:
+    enum:
+      - fsl,etsec-ptp
+      - fsl,fman-ptp-timer
+      - fsl,dpaa2-ptp
+      - fsl,enetc-ptp
+    description: |
+      Should be "fsl,etsec-ptp" for eTSEC
+      Should be "fsl,fman-ptp-timer" for DPAA FMan
+      Should be "fsl,dpaa2-ptp" for DPAA2
+      Should be "fsl,enetc-ptp" for ENETC
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    minItems: 2
+    maxItems: 4
+
+  clocks:
+    maxItems: 1
+
+  fsl,cksel:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      Timer reference clock source.
+
+      Reference clock source is determined by the value, which is holded
+      in CKSEL bits in TMR_CTRL register. "fsl,cksel" property keeps the
+      value, which will be directly written in those bits, that is why,
+      according to reference manual, the next clock sources can be used:
+
+      For eTSEC,
+      <0> - external high precision timer reference clock (TSEC_TMR_CLK
+            input is used for this purpose);
+      <1> - eTSEC system clock;
+      <2> - eTSEC1 transmit clock;
+      <3> - RTC clock input.
+
+      For DPAA FMan,
+      <0> - external high precision timer reference clock (TMR_1588_CLK)
+      <1> - MAC system clock (1/2 FMan clock)
+      <2> - reserved
+      <3> - RTC clock oscillator
+
+  fsl,tclk-period:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: Timer reference clock period in nanoseconds.
+
+  fsl,tmr-prsc:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: Prescaler, divides the output clock.
+
+  fsl,tmr-add:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: Frequency compensation value.
+
+  fsl,tmr-fiper1:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: Fixed interval period pulse generator.
+
+  fsl,tmr-fiper2:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: Fixed interval period pulse generator.
+
+  fsl,tmr-fiper3:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      Fixed interval period pulse generator.
+      Supported only on DPAA2 and ENETC hardware.
+
+  fsl,max-adj:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      Maximum frequency adjustment in parts per billion.
+
+      These properties set the operational parameters for the PTP
+      clock. You must choose these carefully for the clock to work right.
+      Here is how to figure good values:
+
+      TimerOsc     = selected reference clock   MHz
+      tclk_period  = desired clock period       nanoseconds
+      NominalFreq  = 1000 / tclk_period         MHz
+      FreqDivRatio = TimerOsc / NominalFreq     (must be greater that 1.0)
+      tmr_add      = ceil(2^32 / FreqDivRatio)
+      OutputClock  = NominalFreq / tmr_prsc     MHz
+      PulseWidth   = 1 / OutputClock            microseconds
+      FiperFreq1   = desired frequency in Hz
+      FiperDiv1    = 1000000 * OutputClock / FiperFreq1
+      tmr_fiper1   = tmr_prsc * tclk_period * FiperDiv1 - tclk_period
+      max_adj      = 1000000000 * (FreqDivRatio - 1.0) - 1
+
+      The calculation for tmr_fiper2 is the same as for tmr_fiper1. The
+      driver expects that tmr_fiper1 will be correctly set to produce a 1
+      Pulse Per Second (PPS) signal, since this will be offered to the PPS
+      subsystem to synchronize the Linux clock.
+
+      When this attribute is not used, the IEEE 1588 timer reference clock
+      will use the eTSEC system clock (for Gianfar) or the MAC system
+      clock (for DPAA).
+
+  fsl,extts-fifo:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description:
+      The presence of this property indicates hardware
+      support for the external trigger stamp FIFO
+
+  little-endian:
+    $ref: /schemas/types.yaml#/definitions/flag
+    description:
+      The presence of this property indicates the 1588 timer
+      support for the external trigger stamp FIFO.
+      IP block is little-endian mode. The default endian mode
+      is big-endian.
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    ptp_clock@24e00 {
+        compatible = "fsl,etsec-ptp";
+        reg = <0x24E00 0xB0>;
+        interrupts = <12 0x8>, <13 0x8>;
+        interrupt-parent = <&ipic>;
+        fsl,cksel       = <1>;
+        fsl,tclk-period = <10>;
+        fsl,tmr-prsc    = <100>;
+        fsl,tmr-add     = <0x999999A4>;
+        fsl,tmr-fiper1  = <0x3B9AC9F6>;
+        fsl,tmr-fiper2  = <0x00018696>;
+        fsl,max-adj     = <659999998>;
+    };

-- 
2.34.1