[net v2 PATCH] net: stmmac: No need to calculate speed divider when offload is disabled

[Xiaolei Wang <xiaolei.wang@windriver.com>]

commit be27b8965297 ("net: stmmac: replace priv->speed with
the portTransmitRate from the tc-cbs parameters") introduced
a problem. When deleting, it prompts "Invalid portTransmitRate
0 (idleSlope - sendSlope)" and exits. Add judgment on cbs.enable.
Only when offload is enabled, speed divider needs to be calculated.

Fixes: be27b8965297 ("net: stmmac: replace priv->speed with the portTransmitRate from the tc-cbs parameters")
Signed-off-by: Xiaolei Wang <xiaolei.wang@windriver.com>
---

Change log:

v1:
    https://patchwork.kernel.org/project/netdevbpf/patch/20240614081916.764761-1-xiaolei.wang@windriver.com/
v2:
    When offload is disabled, ptr is initialized to 0

 .../net/ethernet/stmicro/stmmac/stmmac_tc.c   | 40 ++++++++++---------
 1 file changed, 22 insertions(+), 18 deletions(-)

diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_tc.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_tc.c
index 1562fbdd0a04..996f2bcd07a2 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_tc.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_tc.c
@@ -358,24 +358,28 @@ static int tc_setup_cbs(struct stmmac_priv *priv,
 
 	port_transmit_rate_kbps = qopt->idleslope - qopt->sendslope;
 
-	/* Port Transmit Rate and Speed Divider */
-	switch (div_s64(port_transmit_rate_kbps, 1000)) {
-	case SPEED_10000:
-	case SPEED_5000:
-		ptr = 32;
-		break;
-	case SPEED_2500:
-	case SPEED_1000:
-		ptr = 8;
-		break;
-	case SPEED_100:
-		ptr = 4;
-		break;
-	default:
-		netdev_err(priv->dev,
-			   "Invalid portTransmitRate %lld (idleSlope - sendSlope)\n",
-			   port_transmit_rate_kbps);
-		return -EINVAL;
+	if (qopt->enable) {
+		/* Port Transmit Rate and Speed Divider */
+		switch (div_s64(port_transmit_rate_kbps, 1000)) {
+		case SPEED_10000:
+		case SPEED_5000:
+			ptr = 32;
+			break;
+		case SPEED_2500:
+		case SPEED_1000:
+			ptr = 8;
+			break;
+		case SPEED_100:
+			ptr = 4;
+			break;
+		default:
+			netdev_err(priv->dev,
+				   "Invalid portTransmitRate %lld (idleSlope - sendSlope)\n",
+				   port_transmit_rate_kbps);
+			return -EINVAL;
+		}
+	} else {
+		ptr = 0;
 	}
 
 	mode_to_use = priv->plat->tx_queues_cfg[queue].mode_to_use;
-- 
2.25.1