[PATCH AUTOSEL 6.1 11/29] wifi: mac80211: mesh: init nonpeer_pm to active by default in mesh sdata

[PATCH AUTOSEL 6.1 11/29] wifi: mac80211: mesh: init nonpeer_pm to active by default in mesh sdata

[Sasha Levin]

From: Nicolas Escande <nico.escande@gmail.com>

[ Upstream commit 6f6291f09a322c1c1578badac8072d049363f4e6 ]

With a ath9k device I can see that:
	iw phy phy0 interface add mesh0 type mp
	ip link set mesh0 up
	iw dev mesh0 scan

Will start a scan with the Power Management bit set in the Frame Control Field.
This is because we set this bit depending on the nonpeer_pm variable of the mesh
iface sdata and when there are no active links on the interface it remains to
NL80211_MESH_POWER_UNKNOWN.

As soon as links starts to be established, it wil switch to
NL80211_MESH_POWER_ACTIVE as it is the value set by befault on the per sta
nonpeer_pm field.
As we want no power save by default, (as expressed with the per sta ini values),
lets init it to the expected default value of NL80211_MESH_POWER_ACTIVE.

Also please note that we cannot change the default value from userspace prior to
establishing a link as using NL80211_CMD_SET_MESH_CONFIG will not work before
NL80211_CMD_JOIN_MESH has been issued. So too late for our initial scan.

Signed-off-by: Nicolas Escande <nico.escande@gmail.com>
Link: https://msgid.link/20240527141759.299411-1-nico.escande@gmail.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/mac80211/mesh.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/net/mac80211/mesh.c b/net/mac80211/mesh.c
index 5a99b8f6e465f..9c9b47d153c28 100644
--- a/net/mac80211/mesh.c
+++ b/net/mac80211/mesh.c
@@ -1625,6 +1625,7 @@ void ieee80211_mesh_init_sdata(struct ieee80211_sub_if_data *sdata)
 	ifmsh->last_preq = jiffies;
 	ifmsh->next_perr = jiffies;
 	ifmsh->csa_role = IEEE80211_MESH_CSA_ROLE_NONE;
+	ifmsh->nonpeer_pm = NL80211_MESH_POWER_ACTIVE;
 	/* Allocate all mesh structures when creating the first mesh interface. */
 	if (!mesh_allocated)
 		ieee80211s_init();
-- 
2.43.0

[PATCH AUTOSEL 6.1 12/29] wifi: mac80211: apply mcast rate only if interface is up

[Sasha Levin]

From: Johannes Berg <johannes.berg@intel.com>

[ Upstream commit 02c665f048a439c0d58cc45334c94634bd7c18e6 ]

If the interface isn't enabled, don't apply multicast
rate changes immediately.

Reported-by: syzbot+de87c09cc7b964ea2e23@syzkaller.appspotmail.com
Link: https://msgid.link/20240515133410.d6cffe5756cc.I47b624a317e62bdb4609ff7fa79403c0c444d32d@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/mac80211/cfg.c | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

diff --git a/net/mac80211/cfg.c b/net/mac80211/cfg.c
index 1e57027da2913..2c60fc165801c 100644
--- a/net/mac80211/cfg.c
+++ b/net/mac80211/cfg.c
@@ -2838,8 +2838,9 @@ static int ieee80211_set_mcast_rate(struct wiphy *wiphy, struct net_device *dev,
 	memcpy(sdata->vif.bss_conf.mcast_rate, rate,
 	       sizeof(int) * NUM_NL80211_BANDS);
 
-	ieee80211_link_info_change_notify(sdata, &sdata->deflink,
-					  BSS_CHANGED_MCAST_RATE);
+	if (ieee80211_sdata_running(sdata))
+		ieee80211_link_info_change_notify(sdata, &sdata->deflink,
+						  BSS_CHANGED_MCAST_RATE);
 
 	return 0;
 }
-- 
2.43.0

[PATCH AUTOSEL 6.1 13/29] wifi: mac80211: handle tasklet frames before stopping

[Sasha Levin]

From: Johannes Berg <johannes.berg@intel.com>

[ Upstream commit 177c6ae9725d783f9e96f02593ce8fb2639be22f ]

The code itself doesn't want to handle frames from the driver
if it's already stopped, but if the tasklet was queued before
and runs after the stop, then all bets are off. Flush queues
before actually stopping, RX should be off at this point since
all the interfaces are removed already, etc.

Reported-by: syzbot+8830db5d3593b5546d2e@syzkaller.appspotmail.com
Link: https://msgid.link/20240515135318.b05f11385c9a.I41c1b33a2e1814c3a7ef352cd7f2951b91785617@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/mac80211/ieee80211_i.h |  2 ++
 net/mac80211/main.c        | 10 ++++++++--
 net/mac80211/util.c        |  2 ++
 3 files changed, 12 insertions(+), 2 deletions(-)

diff --git a/net/mac80211/ieee80211_i.h b/net/mac80211/ieee80211_i.h
index 3e14d5c9aa1b4..0d8a9bb925384 100644
--- a/net/mac80211/ieee80211_i.h
+++ b/net/mac80211/ieee80211_i.h
@@ -1782,6 +1782,8 @@ void ieee80211_link_info_change_notify(struct ieee80211_sub_if_data *sdata,
 void ieee80211_configure_filter(struct ieee80211_local *local);
 u32 ieee80211_reset_erp_info(struct ieee80211_sub_if_data *sdata);
 
+void ieee80211_handle_queued_frames(struct ieee80211_local *local);
+
 u64 ieee80211_mgmt_tx_cookie(struct ieee80211_local *local);
 int ieee80211_attach_ack_skb(struct ieee80211_local *local, struct sk_buff *skb,
 			     u64 *cookie, gfp_t gfp);
diff --git a/net/mac80211/main.c b/net/mac80211/main.c
index 6faba47b7b0ea..89771f0e0ae70 100644
--- a/net/mac80211/main.c
+++ b/net/mac80211/main.c
@@ -300,9 +300,8 @@ u32 ieee80211_reset_erp_info(struct ieee80211_sub_if_data *sdata)
 	       BSS_CHANGED_ERP_SLOT;
 }
 
-static void ieee80211_tasklet_handler(struct tasklet_struct *t)
+void ieee80211_handle_queued_frames(struct ieee80211_local *local)
 {
-	struct ieee80211_local *local = from_tasklet(local, t, tasklet);
 	struct sk_buff *skb;
 
 	while ((skb = skb_dequeue(&local->skb_queue)) ||
@@ -327,6 +326,13 @@ static void ieee80211_tasklet_handler(struct tasklet_struct *t)
 	}
 }
 
+static void ieee80211_tasklet_handler(struct tasklet_struct *t)
+{
+	struct ieee80211_local *local = from_tasklet(local, t, tasklet);
+
+	ieee80211_handle_queued_frames(local);
+}
+
 static void ieee80211_restart_work(struct work_struct *work)
 {
 	struct ieee80211_local *local =
diff --git a/net/mac80211/util.c b/net/mac80211/util.c
index 1088d90e355ba..08e6691cdc4a4 100644
--- a/net/mac80211/util.c
+++ b/net/mac80211/util.c
@@ -2207,6 +2207,8 @@ u32 ieee80211_sta_get_rates(struct ieee80211_sub_if_data *sdata,
 
 void ieee80211_stop_device(struct ieee80211_local *local)
 {
+	ieee80211_handle_queued_frames(local);
+
 	ieee80211_led_radio(local, false);
 	ieee80211_mod_tpt_led_trig(local, 0, IEEE80211_TPT_LEDTRIG_FL_RADIO);
 
-- 
2.43.0

[PATCH AUTOSEL 6.1 14/29] wifi: cfg80211: fix 6 GHz scan request building

[Sasha Levin]

From: Johannes Berg <johannes.berg@intel.com>

[ Upstream commit f7a8b10bfd614d7a9a16fbe80d28ead4f063cb00 ]

The 6 GHz scan request struct allocated by cfg80211_scan_6ghz() is
meant to be formed this way:

 [base struct][channels][ssids][6ghz_params]

It is allocated with [channels] as the maximum number of channels
supported by the driver in the 6 GHz band, since allocation is
before knowing how many there will be.

However, the inner pointers are set incorrectly: initially, the
6 GHz scan parameters pointer is set:

 [base struct][channels]
                        ^ scan_6ghz_params

and later the SSID pointer is set to the end of the actually
_used_ channels.

 [base struct][channels]
                  ^ ssids

If many APs were to be discovered, and many channels used, and
there were many SSIDs, then the SSIDs could overlap the 6 GHz
parameters.

Additionally, the request->ssids for most of the function points
to the original request still (given the struct copy) but is used
normally, which is confusing.

Clear this up, by actually using the allocated space for 6 GHz
parameters _after_ the SSIDs, and set up the SSIDs initially so
they are used more clearly. Just like in nl80211.c, set them
only if there actually are SSIDs though.

Finally, also copy the elements (ie/ie_len) so they're part of
the same request, not pointing to the old request.

Co-developed-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Reviewed-by: Ilan Peer <ilan.peer@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Link: https://msgid.link/20240510113738.4190692ef4ee.I0cb19188be17a8abd029805e3373c0a7777c214c@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/wireless/rdev-ops.h |  6 +++++-
 net/wireless/scan.c     | 47 +++++++++++++++++++++++++++--------------
 2 files changed, 36 insertions(+), 17 deletions(-)

diff --git a/net/wireless/rdev-ops.h b/net/wireless/rdev-ops.h
index ee853a14a02de..5f210686c4110 100644
--- a/net/wireless/rdev-ops.h
+++ b/net/wireless/rdev-ops.h
@@ -2,7 +2,7 @@
 /*
  * Portions of this file
  * Copyright(c) 2016-2017 Intel Deutschland GmbH
- * Copyright (C) 2018, 2021-2023 Intel Corporation
+ * Copyright (C) 2018, 2021-2024 Intel Corporation
  */
 #ifndef __CFG80211_RDEV_OPS
 #define __CFG80211_RDEV_OPS
@@ -446,6 +446,10 @@ static inline int rdev_scan(struct cfg80211_registered_device *rdev,
 			    struct cfg80211_scan_request *request)
 {
 	int ret;
+
+	if (WARN_ON_ONCE(!request->n_ssids && request->ssids))
+		return -EINVAL;
+
 	trace_rdev_scan(&rdev->wiphy, request);
 	ret = rdev->ops->scan(&rdev->wiphy, request);
 	trace_rdev_return_int(&rdev->wiphy, ret);
diff --git a/net/wireless/scan.c b/net/wireless/scan.c
index 3ad4c1032c038..ee4ef32f39b37 100644
--- a/net/wireless/scan.c
+++ b/net/wireless/scan.c
@@ -778,6 +778,7 @@ static int cfg80211_scan_6ghz(struct cfg80211_registered_device *rdev)
 	LIST_HEAD(coloc_ap_list);
 	bool need_scan_psc = true;
 	const struct ieee80211_sband_iftype_data *iftd;
+	size_t size, offs_ssids, offs_6ghz_params, offs_ies;
 
 	rdev_req->scan_6ghz = true;
 
@@ -806,10 +807,15 @@ static int cfg80211_scan_6ghz(struct cfg80211_registered_device *rdev)
 		spin_unlock_bh(&rdev->bss_lock);
 	}
 
-	request = kzalloc(struct_size(request, channels, n_channels) +
-			  sizeof(*request->scan_6ghz_params) * count +
-			  sizeof(*request->ssids) * rdev_req->n_ssids,
-			  GFP_KERNEL);
+	size = struct_size(request, channels, n_channels);
+	offs_ssids = size;
+	size += sizeof(*request->ssids) * rdev_req->n_ssids;
+	offs_6ghz_params = size;
+	size += sizeof(*request->scan_6ghz_params) * count;
+	offs_ies = size;
+	size += rdev_req->ie_len;
+
+	request = kzalloc(size, GFP_KERNEL);
 	if (!request) {
 		cfg80211_free_coloc_ap_list(&coloc_ap_list);
 		return -ENOMEM;
@@ -817,8 +823,26 @@ static int cfg80211_scan_6ghz(struct cfg80211_registered_device *rdev)
 
 	*request = *rdev_req;
 	request->n_channels = 0;
-	request->scan_6ghz_params =
-		(void *)&request->channels[n_channels];
+	request->n_6ghz_params = 0;
+	if (rdev_req->n_ssids) {
+		/*
+		 * Add the ssids from the parent scan request to the new
+		 * scan request, so the driver would be able to use them
+		 * in its probe requests to discover hidden APs on PSC
+		 * channels.
+		 */
+		request->ssids = (void *)request + offs_ssids;
+		memcpy(request->ssids, rdev_req->ssids,
+		       sizeof(*request->ssids) * request->n_ssids);
+	}
+	request->scan_6ghz_params = (void *)request + offs_6ghz_params;
+
+	if (rdev_req->ie_len) {
+		void *ie = (void *)request + offs_ies;
+
+		memcpy(ie, rdev_req->ie, rdev_req->ie_len);
+		request->ie = ie;
+	}
 
 	/*
 	 * PSC channels should not be scanned in case of direct scan with 1 SSID
@@ -906,17 +930,8 @@ static int cfg80211_scan_6ghz(struct cfg80211_registered_device *rdev)
 
 	if (request->n_channels) {
 		struct cfg80211_scan_request *old = rdev->int_scan_req;
-		rdev->int_scan_req = request;
 
-		/*
-		 * Add the ssids from the parent scan request to the new scan
-		 * request, so the driver would be able to use them in its
-		 * probe requests to discover hidden APs on PSC channels.
-		 */
-		request->ssids = (void *)&request->channels[request->n_channels];
-		request->n_ssids = rdev_req->n_ssids;
-		memcpy(request->ssids, rdev_req->ssids, sizeof(*request->ssids) *
-		       request->n_ssids);
+		rdev->int_scan_req = request;
 
 		/*
 		 * If this scan follows a previous scan, save the scan start
-- 
2.43.0

[PATCH AUTOSEL 6.1 19/29] wifi: mac80211: fix UBSAN noise in ieee80211_prep_hw_scan()

[Sasha Levin]

From: Dmitry Antipov <dmantipov@yandex.ru>

[ Upstream commit 92ecbb3ac6f3fe8ae9edf3226c76aa17b6800699 ]

When testing the previous patch with CONFIG_UBSAN_BOUNDS, I've
noticed the following:

UBSAN: array-index-out-of-bounds in net/mac80211/scan.c:372:4
index 0 is out of range for type 'struct ieee80211_channel *[]'
CPU: 0 PID: 1435 Comm: wpa_supplicant Not tainted 6.9.0+ #1
Hardware name: LENOVO 20UN005QRT/20UN005QRT <...BIOS details...>
Call Trace:
 <TASK>
 dump_stack_lvl+0x2d/0x90
 __ubsan_handle_out_of_bounds+0xe7/0x140
 ? timerqueue_add+0x98/0xb0
 ieee80211_prep_hw_scan+0x2db/0x480 [mac80211]
 ? __kmalloc+0xe1/0x470
 __ieee80211_start_scan+0x541/0x760 [mac80211]
 rdev_scan+0x1f/0xe0 [cfg80211]
 nl80211_trigger_scan+0x9b6/0xae0 [cfg80211]
 ...<the rest is not too useful...>

Since '__ieee80211_start_scan()' leaves 'hw_scan_req->req.n_channels'
uninitialized, actual boundaries of 'hw_scan_req->req.channels' can't
be checked in 'ieee80211_prep_hw_scan()'. Although an initialization
of 'hw_scan_req->req.n_channels' introduces some confusion around
allocated vs. used VLA members, this shouldn't be a problem since
everything is correctly adjusted soon in 'ieee80211_prep_hw_scan()'.

Cleanup 'kmalloc()' math in '__ieee80211_start_scan()' by using the
convenient 'struct_size()' as well.

Signed-off-by: Dmitry Antipov <dmantipov@yandex.ru>
Link: https://msgid.link/20240517153332.18271-2-dmantipov@yandex.ru
[improve (imho) indentation a bit]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/mac80211/scan.c | 14 ++++++++++----
 1 file changed, 10 insertions(+), 4 deletions(-)

diff --git a/net/mac80211/scan.c b/net/mac80211/scan.c
index 933d02d7c1284..62c22ff329ad4 100644
--- a/net/mac80211/scan.c
+++ b/net/mac80211/scan.c
@@ -733,15 +733,21 @@ static int __ieee80211_start_scan(struct ieee80211_sub_if_data *sdata,
 			local->hw_scan_ies_bufsize *= n_bands;
 		}
 
-		local->hw_scan_req = kmalloc(
-				sizeof(*local->hw_scan_req) +
-				req->n_channels * sizeof(req->channels[0]) +
-				local->hw_scan_ies_bufsize, GFP_KERNEL);
+		local->hw_scan_req = kmalloc(struct_size(local->hw_scan_req,
+							 req.channels,
+							 req->n_channels) +
+					     local->hw_scan_ies_bufsize,
+					     GFP_KERNEL);
 		if (!local->hw_scan_req)
 			return -ENOMEM;
 
 		local->hw_scan_req->req.ssids = req->ssids;
 		local->hw_scan_req->req.n_ssids = req->n_ssids;
+		/* None of the channels are actually set
+		 * up but let UBSAN know the boundaries.
+		 */
+		local->hw_scan_req->req.n_channels = req->n_channels;
+
 		ies = (u8 *)local->hw_scan_req +
 			sizeof(*local->hw_scan_req) +
 			req->n_channels * sizeof(req->channels[0]);
-- 
2.43.0

[PATCH AUTOSEL 6.1 24/29] net: ipv6: rpl_iptunnel: block BH in rpl_output() and rpl_input()

[Sasha Levin]

From: Eric Dumazet <edumazet@google.com>

[ Upstream commit db0090c6eb12c31246438b7fe2a8f1b833e7a653 ]

As explained in commit 1378817486d6 ("tipc: block BH
before using dst_cache"), net/core/dst_cache.c
helpers need to be called with BH disabled.

Disabling preemption in rpl_output() is not good enough,
because rpl_output() is called from process context,
lwtunnel_output() only uses rcu_read_lock().

We might be interrupted by a softirq, re-enter rpl_output()
and corrupt dst_cache data structures.

Fix the race by using local_bh_disable() instead of
preempt_disable().

Apply a similar change in rpl_input().

Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Alexander Aring <aahringo@redhat.com>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Link: https://lore.kernel.org/r/20240531132636.2637995-3-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/ipv6/rpl_iptunnel.c | 14 ++++++--------
 1 file changed, 6 insertions(+), 8 deletions(-)

diff --git a/net/ipv6/rpl_iptunnel.c b/net/ipv6/rpl_iptunnel.c
index ff691d9f4a04f..26adbe7f8a2f0 100644
--- a/net/ipv6/rpl_iptunnel.c
+++ b/net/ipv6/rpl_iptunnel.c
@@ -212,9 +212,9 @@ static int rpl_output(struct net *net, struct sock *sk, struct sk_buff *skb)
 	if (unlikely(err))
 		goto drop;
 
-	preempt_disable();
+	local_bh_disable();
 	dst = dst_cache_get(&rlwt->cache);
-	preempt_enable();
+	local_bh_enable();
 
 	if (unlikely(!dst)) {
 		struct ipv6hdr *hdr = ipv6_hdr(skb);
@@ -234,9 +234,9 @@ static int rpl_output(struct net *net, struct sock *sk, struct sk_buff *skb)
 			goto drop;
 		}
 
-		preempt_disable();
+		local_bh_disable();
 		dst_cache_set_ip6(&rlwt->cache, dst, &fl6.saddr);
-		preempt_enable();
+		local_bh_enable();
 	}
 
 	skb_dst_drop(skb);
@@ -268,9 +268,8 @@ static int rpl_input(struct sk_buff *skb)
 		return err;
 	}
 
-	preempt_disable();
+	local_bh_disable();
 	dst = dst_cache_get(&rlwt->cache);
-	preempt_enable();
 
 	skb_dst_drop(skb);
 
@@ -278,14 +277,13 @@ static int rpl_input(struct sk_buff *skb)
 		ip6_route_input(skb);
 		dst = skb_dst(skb);
 		if (!dst->error) {
-			preempt_disable();
 			dst_cache_set_ip6(&rlwt->cache, dst,
 					  &ipv6_hdr(skb)->saddr);
-			preempt_enable();
 		}
 	} else {
 		skb_dst_set(skb, dst);
 	}
+	local_bh_enable();
 
 	err = skb_cow_head(skb, LL_RESERVED_SPACE(dst->dev));
 	if (unlikely(err))
-- 
2.43.0

[PATCH AUTOSEL 6.1 25/29] ila: block BH in ila_output()

[Sasha Levin]

From: Eric Dumazet <edumazet@google.com>

[ Upstream commit cf28ff8e4c02e1ffa850755288ac954b6ff0db8c ]

As explained in commit 1378817486d6 ("tipc: block BH
before using dst_cache"), net/core/dst_cache.c
helpers need to be called with BH disabled.

ila_output() is called from lwtunnel_output()
possibly from process context, and under rcu_read_lock().

We might be interrupted by a softirq, re-enter ila_output()
and corrupt dst_cache data structures.

Fix the race by using local_bh_disable().

Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Link: https://lore.kernel.org/r/20240531132636.2637995-5-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/ipv6/ila/ila_lwt.c | 7 ++++++-
 1 file changed, 6 insertions(+), 1 deletion(-)

diff --git a/net/ipv6/ila/ila_lwt.c b/net/ipv6/ila/ila_lwt.c
index 8c1ce78956bae..9d37f7164e732 100644
--- a/net/ipv6/ila/ila_lwt.c
+++ b/net/ipv6/ila/ila_lwt.c
@@ -58,7 +58,9 @@ static int ila_output(struct net *net, struct sock *sk, struct sk_buff *skb)
 		return orig_dst->lwtstate->orig_output(net, sk, skb);
 	}
 
+	local_bh_disable();
 	dst = dst_cache_get(&ilwt->dst_cache);
+	local_bh_enable();
 	if (unlikely(!dst)) {
 		struct ipv6hdr *ip6h = ipv6_hdr(skb);
 		struct flowi6 fl6;
@@ -86,8 +88,11 @@ static int ila_output(struct net *net, struct sock *sk, struct sk_buff *skb)
 			goto drop;
 		}
 
-		if (ilwt->connected)
+		if (ilwt->connected) {
+			local_bh_disable();
 			dst_cache_set_ip6(&ilwt->dst_cache, dst, &fl6.saddr);
+			local_bh_enable();
+		}
 	}
 
 	skb_dst_set(skb, dst);
-- 
2.43.0

[PATCH AUTOSEL 6.1 13/29] wifi: mac80211: handle tasklet frames before stopping

[Sasha Levin]

From: Johannes Berg <johannes.berg@intel.com>

[ Upstream commit 177c6ae9725d783f9e96f02593ce8fb2639be22f ]

The code itself doesn't want to handle frames from the driver
if it's already stopped, but if the tasklet was queued before
and runs after the stop, then all bets are off. Flush queues
before actually stopping, RX should be off at this point since
all the interfaces are removed already, etc.

Reported-by: syzbot+8830db5d3593b5546d2e@syzkaller.appspotmail.com
Link: https://msgid.link/20240515135318.b05f11385c9a.I41c1b33a2e1814c3a7ef352cd7f2951b91785617@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/mac80211/ieee80211_i.h |  2 ++
 net/mac80211/main.c        | 10 ++++++++--
 net/mac80211/util.c        |  2 ++
 3 files changed, 12 insertions(+), 2 deletions(-)

diff --git a/net/mac80211/ieee80211_i.h b/net/mac80211/ieee80211_i.h
index 3e14d5c9aa1b4..0d8a9bb925384 100644
--- a/net/mac80211/ieee80211_i.h
+++ b/net/mac80211/ieee80211_i.h
@@ -1782,6 +1782,8 @@ void ieee80211_link_info_change_notify(struct ieee80211_sub_if_data *sdata,
 void ieee80211_configure_filter(struct ieee80211_local *local);
 u32 ieee80211_reset_erp_info(struct ieee80211_sub_if_data *sdata);
 
+void ieee80211_handle_queued_frames(struct ieee80211_local *local);
+
 u64 ieee80211_mgmt_tx_cookie(struct ieee80211_local *local);
 int ieee80211_attach_ack_skb(struct ieee80211_local *local, struct sk_buff *skb,
 			     u64 *cookie, gfp_t gfp);
diff --git a/net/mac80211/main.c b/net/mac80211/main.c
index 6faba47b7b0ea..89771f0e0ae70 100644
--- a/net/mac80211/main.c
+++ b/net/mac80211/main.c
@@ -300,9 +300,8 @@ u32 ieee80211_reset_erp_info(struct ieee80211_sub_if_data *sdata)
 	       BSS_CHANGED_ERP_SLOT;
 }
 
-static void ieee80211_tasklet_handler(struct tasklet_struct *t)
+void ieee80211_handle_queued_frames(struct ieee80211_local *local)
 {
-	struct ieee80211_local *local = from_tasklet(local, t, tasklet);
 	struct sk_buff *skb;
 
 	while ((skb = skb_dequeue(&local->skb_queue)) ||
@@ -327,6 +326,13 @@ static void ieee80211_tasklet_handler(struct tasklet_struct *t)
 	}
 }
 
+static void ieee80211_tasklet_handler(struct tasklet_struct *t)
+{
+	struct ieee80211_local *local = from_tasklet(local, t, tasklet);
+
+	ieee80211_handle_queued_frames(local);
+}
+
 static void ieee80211_restart_work(struct work_struct *work)
 {
 	struct ieee80211_local *local =
diff --git a/net/mac80211/util.c b/net/mac80211/util.c
index 1088d90e355ba..08e6691cdc4a4 100644
--- a/net/mac80211/util.c
+++ b/net/mac80211/util.c
@@ -2207,6 +2207,8 @@ u32 ieee80211_sta_get_rates(struct ieee80211_sub_if_data *sdata,
 
 void ieee80211_stop_device(struct ieee80211_local *local)
 {
+	ieee80211_handle_queued_frames(local);
+
 	ieee80211_led_radio(local, false);
 	ieee80211_mod_tpt_led_trig(local, 0, IEEE80211_TPT_LEDTRIG_FL_RADIO);
 
-- 
2.43.0