[PATCH v2] dt-bindings: net: dsa: mediatek,mt7530: Minor wording fixes

Chris Packham
2024-06-24T21:19:08Z

Update the mt7530 binding with some minor updates that make the document
easier to read.

Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
---

Notes:
I was referring to this dt binding and found a couple of places where
the wording could be improved. I'm not exactly a techical writer but
hopefully I've made things a bit better.

Changes in v2:
- Update title, this is not just fixing grammar
- Add missing The instead of changing has to have

.../devicetree/bindings/net/dsa/mediatek,mt7530.yaml | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/Documentation/devicetree/bindings/net/dsa/mediatek,mt7530.yaml b/Documentation/devicetree/bindings/net/dsa/mediatek,mt7530.yaml
index 1c2444121e60..7e405ad96eb2 100644
--- a/Documentation/devicetree/bindings/net/dsa/mediatek,mt7530.yaml
+++ b/Documentation/devicetree/bindings/net/dsa/mediatek,mt7530.yaml
@@ -22,16 +22,16 @@ description: |

The MT7988 SoC comes with a built-in switch similar to MT7531 as well as four
Gigabit Ethernet PHYs. The switch registers are directly mapped into the SoC's
- memory map rather than using MDIO. The switch got an internally connected 10G
+ memory map rather than using MDIO. The switch has an internally connected 10G
CPU port and 4 user ports connected to the built-in Gigabit Ethernet PHYs.

- MT7530 in MT7620AN, MT7620DA, MT7620DAN and MT7620NN SoCs has got 10/100 PHYs
+ The MT7530 in MT7620AN, MT7620DA, MT7620DAN and MT7620NN SoCs has 10/100 PHYs
and the switch registers are directly mapped into SoC's memory map rather than
using MDIO. The DSA driver currently doesn't support MT7620 variants.

There is only the standalone version of MT7531.

- Port 5 on MT7530 has got various ways of configuration:
+ Port 5 on MT7530 supports various configurations:

- Port 5 can be used as a CPU port.

--
2.45.2