From: Geetha sowjanya <gakula@marvell.com>
To: <netdev@vger.kernel.org>, <linux-kernel@vger.kernel.org>
Cc: <kuba@kernel.org>, <davem@davemloft.net>, <pabeni@redhat.com>,
<edumazet@google.com>, <sgoutham@marvell.com>,
<gakula@marvell.com>, <sbhatta@marvell.com>, <hkelam@marvell.com>
Subject: [net-next PATCH v6 03/10] octeontx2-pf: Create representor netdev
Date: Tue, 25 Jun 2024 19:54:56 +0530 [thread overview]
Message-ID: <20240625142503.3293-4-gakula@marvell.com> (raw)
In-Reply-To: <20240625142503.3293-1-gakula@marvell.com>
Adds initial devlink support to set/get the switchdev mode.
Representor netdevs are created for each rvu devices when
the switch mode is set to 'switchdev'. These netdevs are
be used to control and configure VFs.
Signed-off-by: Geetha sowjanya <gakula@marvell.com>
---
.../marvell/octeontx2/nic/otx2_devlink.c | 49 ++++++
.../net/ethernet/marvell/octeontx2/nic/rep.c | 165 ++++++++++++++++++
.../net/ethernet/marvell/octeontx2/nic/rep.h | 3 +
3 files changed, 217 insertions(+)
diff --git a/drivers/net/ethernet/marvell/octeontx2/nic/otx2_devlink.c b/drivers/net/ethernet/marvell/octeontx2/nic/otx2_devlink.c
index 53f14aa944bd..33ec9a7f7c03 100644
--- a/drivers/net/ethernet/marvell/octeontx2/nic/otx2_devlink.c
+++ b/drivers/net/ethernet/marvell/octeontx2/nic/otx2_devlink.c
@@ -141,7 +141,56 @@ static const struct devlink_param otx2_dl_params[] = {
otx2_dl_ucast_flt_cnt_validate),
};
+#ifdef CONFIG_RVU_ESWITCH
+static int otx2_devlink_eswitch_mode_get(struct devlink *devlink, u16 *mode)
+{
+ struct otx2_devlink *otx2_dl = devlink_priv(devlink);
+ struct otx2_nic *pfvf = otx2_dl->pfvf;
+
+ if (!otx2_rep_dev(pfvf->pdev))
+ return -EOPNOTSUPP;
+
+ *mode = pfvf->esw_mode;
+
+ return 0;
+}
+
+static int otx2_devlink_eswitch_mode_set(struct devlink *devlink, u16 mode,
+ struct netlink_ext_ack *extack)
+{
+ struct otx2_devlink *otx2_dl = devlink_priv(devlink);
+ struct otx2_nic *pfvf = otx2_dl->pfvf;
+ int ret = 0;
+
+ if (!otx2_rep_dev(pfvf->pdev))
+ return -EOPNOTSUPP;
+
+ if (pfvf->esw_mode == mode)
+ return 0;
+
+ switch (mode) {
+ case DEVLINK_ESWITCH_MODE_LEGACY:
+ rvu_rep_destroy(pfvf);
+ break;
+ case DEVLINK_ESWITCH_MODE_SWITCHDEV:
+ ret = rvu_rep_create(pfvf, extack);
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ if (!ret)
+ pfvf->esw_mode = mode;
+
+ return ret;
+}
+#endif
+
static const struct devlink_ops otx2_devlink_ops = {
+#ifdef CONFIG_RVU_ESWITCH
+ .eswitch_mode_get = otx2_devlink_eswitch_mode_get,
+ .eswitch_mode_set = otx2_devlink_eswitch_mode_set,
+#endif
};
int otx2_register_dl(struct otx2_nic *pfvf)
diff --git a/drivers/net/ethernet/marvell/octeontx2/nic/rep.c b/drivers/net/ethernet/marvell/octeontx2/nic/rep.c
index b0a0080e50d7..6ea5b4904a7c 100644
--- a/drivers/net/ethernet/marvell/octeontx2/nic/rep.c
+++ b/drivers/net/ethernet/marvell/octeontx2/nic/rep.c
@@ -28,6 +28,164 @@ MODULE_DESCRIPTION(DRV_STRING);
MODULE_LICENSE("GPL");
MODULE_DEVICE_TABLE(pci, rvu_rep_id_table);
+static int rvu_rep_napi_init(struct otx2_nic *priv,
+ struct netlink_ext_ack *extack)
+{
+ struct otx2_qset *qset = &priv->qset;
+ struct otx2_cq_poll *cq_poll = NULL;
+ struct otx2_hw *hw = &priv->hw;
+ int err = 0, qidx, vec;
+ char *irq_name;
+
+ qset->napi = kcalloc(hw->cint_cnt, sizeof(*cq_poll), GFP_KERNEL);
+ if (!qset->napi)
+ return -ENOMEM;
+
+ /* Register NAPI handler */
+ for (qidx = 0; qidx < hw->cint_cnt; qidx++) {
+ cq_poll = &qset->napi[qidx];
+ cq_poll->cint_idx = qidx;
+ cq_poll->cq_ids[CQ_RX] =
+ (qidx < hw->rx_queues) ? qidx : CINT_INVALID_CQ;
+ cq_poll->cq_ids[CQ_TX] = (qidx < hw->tx_queues) ?
+ qidx + hw->rx_queues :
+ CINT_INVALID_CQ;
+ cq_poll->cq_ids[CQ_XDP] = CINT_INVALID_CQ;
+ cq_poll->cq_ids[CQ_QOS] = CINT_INVALID_CQ;
+
+ cq_poll->dev = (void *)priv;
+ netif_napi_add(priv->reps[qidx]->netdev, &cq_poll->napi,
+ otx2_napi_handler);
+ napi_enable(&cq_poll->napi);
+ }
+ /* Register CQ IRQ handlers */
+ vec = hw->nix_msixoff + NIX_LF_CINT_VEC_START;
+ for (qidx = 0; qidx < hw->cint_cnt; qidx++) {
+ irq_name = &hw->irq_name[vec * NAME_SIZE];
+
+ snprintf(irq_name, NAME_SIZE, "rep%d-rxtx-%d", qidx, qidx);
+
+ err = request_irq(pci_irq_vector(priv->pdev, vec),
+ otx2_cq_intr_handler, 0, irq_name,
+ &qset->napi[qidx]);
+ if (err) {
+ NL_SET_ERR_MSG_FMT_MOD(extack,
+ "RVU REP IRQ registration failed for CQ%d",
+ qidx);
+ goto err_free_cints;
+ }
+ vec++;
+
+ /* Enable CQ IRQ */
+ otx2_write64(priv, NIX_LF_CINTX_INT(qidx), BIT_ULL(0));
+ otx2_write64(priv, NIX_LF_CINTX_ENA_W1S(qidx), BIT_ULL(0));
+ }
+ priv->flags &= ~OTX2_FLAG_INTF_DOWN;
+ return 0;
+
+err_free_cints:
+ otx2_free_cints(priv, qidx);
+ otx2_disable_napi(priv);
+ return err;
+}
+
+static void rvu_rep_free_cq_rsrc(struct otx2_nic *priv)
+{
+ struct otx2_qset *qset = &priv->qset;
+ struct otx2_cq_poll *cq_poll = NULL;
+ int qidx, vec;
+
+ /* Cleanup CQ NAPI and IRQ */
+ vec = priv->hw.nix_msixoff + NIX_LF_CINT_VEC_START;
+ for (qidx = 0; qidx < priv->hw.cint_cnt; qidx++) {
+ /* Disable interrupt */
+ otx2_write64(priv, NIX_LF_CINTX_ENA_W1C(qidx), BIT_ULL(0));
+
+ synchronize_irq(pci_irq_vector(priv->pdev, vec));
+
+ cq_poll = &qset->napi[qidx];
+ napi_synchronize(&cq_poll->napi);
+ vec++;
+ }
+ otx2_free_cints(priv, priv->hw.cint_cnt);
+ otx2_disable_napi(priv);
+}
+
+void rvu_rep_destroy(struct otx2_nic *priv)
+{
+ struct rep_dev *rep;
+ int rep_id;
+
+ priv->flags |= OTX2_FLAG_INTF_DOWN;
+ rvu_rep_free_cq_rsrc(priv);
+ for (rep_id = 0; rep_id < priv->rep_cnt; rep_id++) {
+ rep = priv->reps[rep_id];
+ unregister_netdev(rep->netdev);
+ free_netdev(rep->netdev);
+ }
+ kfree(priv->reps);
+}
+
+int rvu_rep_create(struct otx2_nic *priv, struct netlink_ext_ack *extack)
+{
+ int rep_cnt = priv->rep_cnt;
+ struct net_device *ndev;
+ struct rep_dev *rep;
+ int rep_id, err;
+ u16 pcifunc;
+
+ priv->reps = kcalloc(rep_cnt, sizeof(struct rep_dev *), GFP_KERNEL);
+ if (!priv->reps)
+ return -ENOMEM;
+
+ for (rep_id = 0; rep_id < rep_cnt; rep_id++) {
+ ndev = alloc_etherdev(sizeof(*rep));
+ if (!ndev) {
+ NL_SET_ERR_MSG_FMT_MOD(extack,
+ "PFVF representor:%d creation failed",
+ rep_id);
+ err = -ENOMEM;
+ goto exit;
+ }
+
+ rep = netdev_priv(ndev);
+ priv->reps[rep_id] = rep;
+ rep->mdev = priv;
+ rep->netdev = ndev;
+ rep->rep_id = rep_id;
+
+ ndev->min_mtu = OTX2_MIN_MTU;
+ ndev->max_mtu = priv->hw.max_mtu;
+ pcifunc = priv->rep_pf_map[rep_id];
+ rep->pcifunc = pcifunc;
+
+ snprintf(ndev->name, sizeof(ndev->name), "r%dp%d", rep_id,
+ rvu_get_pf(pcifunc));
+
+ eth_hw_addr_random(ndev);
+ err = register_netdev(ndev);
+ if (err) {
+ NL_SET_ERR_MSG_MOD(extack,
+ "PFVF reprentator registration failed");
+ free_netdev(ndev);
+ goto exit;
+ }
+ }
+ err = rvu_rep_napi_init(priv, extack);
+ if (err)
+ goto exit;
+
+ return 0;
+exit:
+ while (--rep_id >= 0) {
+ rep = priv->reps[rep_id];
+ unregister_netdev(rep->netdev);
+ free_netdev(rep->netdev);
+ }
+ kfree(priv->reps);
+ return err;
+}
+
static void rvu_rep_rsrc_free(struct otx2_nic *priv)
{
struct otx2_qset *qset = &priv->qset;
@@ -167,6 +325,10 @@ static int rvu_rep_probe(struct pci_dev *pdev, const struct pci_device_id *id)
if (err)
goto err_detach_rsrc;
+ err = otx2_register_dl(priv);
+ if (err)
+ goto err_detach_rsrc;
+
return 0;
err_detach_rsrc:
@@ -188,6 +350,9 @@ static void rvu_rep_remove(struct pci_dev *pdev)
{
struct otx2_nic *priv = pci_get_drvdata(pdev);
+ otx2_unregister_dl(priv);
+ if (!(priv->flags & OTX2_FLAG_INTF_DOWN))
+ rvu_rep_destroy(priv);
rvu_rep_rsrc_free(priv);
otx2_detach_resources(&priv->mbox);
if (priv->hw.lmt_info)
diff --git a/drivers/net/ethernet/marvell/octeontx2/nic/rep.h b/drivers/net/ethernet/marvell/octeontx2/nic/rep.h
index 565e75628df2..c04874c4d4c6 100644
--- a/drivers/net/ethernet/marvell/octeontx2/nic/rep.h
+++ b/drivers/net/ethernet/marvell/octeontx2/nic/rep.h
@@ -28,4 +28,7 @@ static inline bool otx2_rep_dev(struct pci_dev *pdev)
{
return pdev->device == PCI_DEVID_RVU_REP;
}
+
+int rvu_rep_create(struct otx2_nic *priv, struct netlink_ext_ack *extack);
+void rvu_rep_destroy(struct otx2_nic *priv);
#endif /* REP_H */
--
2.25.1
next prev parent reply other threads:[~2024-06-25 14:25 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-06-25 14:24 [net-next PATCH v6 00/10] Introduce RVU representors Geetha sowjanya
2024-06-25 14:24 ` [net-next PATCH v6 01/10] octeontx2-pf: Refactoring RVU driver Geetha sowjanya
2024-06-25 14:24 ` [net-next PATCH v6 02/10] octeontx2-pf: RVU representor driver Geetha sowjanya
2024-06-25 14:24 ` Geetha sowjanya [this message]
2024-06-25 14:24 ` [net-next PATCH v6 04/10] octeontx2-pf: Add basic net_device_ops Geetha sowjanya
2024-06-25 14:24 ` [net-next PATCH v6 05/10] octeontx2-af: Add packet path between representor and VF Geetha sowjanya
2024-06-25 14:24 ` [net-next PATCH v6 06/10] octeontx2-pf: Get VF stats via representor Geetha sowjanya
2024-06-25 14:25 ` [net-next PATCH v6 07/10] octeontx2-pf: Add support to sync link state between representor and VFs Geetha sowjanya
2024-06-25 14:25 ` [net-next PATCH v6 08/10] octeontx2-pf: Configure VF mtu via representor Geetha sowjanya
2024-06-25 14:25 ` [net-next PATCH v6 09/10] octeontx2-pf: Add representors for sdp MAC Geetha sowjanya
2024-06-25 14:25 ` [net-next PATCH v6 10/10] octeontx2-pf: Add devlink port support Geetha sowjanya
2024-06-27 23:04 ` [net-next PATCH v6 00/10] Introduce RVU representors Jakub Kicinski
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20240625142503.3293-4-gakula@marvell.com \
--to=gakula@marvell.com \
--cc=davem@davemloft.net \
--cc=edumazet@google.com \
--cc=hkelam@marvell.com \
--cc=kuba@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=netdev@vger.kernel.org \
--cc=pabeni@redhat.com \
--cc=sbhatta@marvell.com \
--cc=sgoutham@marvell.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).