From: Tom Herbert <tom@herbertland.com>
To: davem@davemloft.net, kuba@kernel.org, edumazet@google.com,
netdev@vger.kernel.org, felipe@sipanda.io
Cc: Tom Herbert <tom@herbertland.com>
Subject: [PATCH 03/12] flow_dissector: Move ETH_P_TEB out of GRE
Date: Wed, 31 Jul 2024 10:23:23 -0700 [thread overview]
Message-ID: <20240731172332.683815-4-tom@herbertland.com> (raw)
In-Reply-To: <20240731172332.683815-1-tom@herbertland.com>
If the GRE protocol is ETH_P_TEB then just process that as any
another EtherType since it's now supported in the main loop
Signed-off-by: Tom Herbert <tom@herbertland.com>
---
net/core/flow_dissector.c | 36 ++++++++++--------------------------
1 file changed, 10 insertions(+), 26 deletions(-)
diff --git a/net/core/flow_dissector.c b/net/core/flow_dissector.c
index d9abb4ae021b..416f889c623c 100644
--- a/net/core/flow_dissector.c
+++ b/net/core/flow_dissector.c
@@ -654,7 +654,7 @@ __skb_flow_dissect_gre(const struct sk_buff *skb,
struct flow_dissector_key_control *key_control,
struct flow_dissector *flow_dissector,
void *target_container, const void *data,
- __be16 *p_proto, int *p_nhoff, int *p_hlen,
+ __be16 *p_proto, int *p_nhoff, int hlen,
unsigned int flags)
{
struct flow_dissector_key_keyid *key_keyid;
@@ -663,7 +663,7 @@ __skb_flow_dissect_gre(const struct sk_buff *skb,
u16 gre_ver;
hdr = __skb_header_pointer(skb, *p_nhoff, sizeof(_hdr),
- data, *p_hlen, &_hdr);
+ data, hlen, &_hdr);
if (!hdr)
return FLOW_DISSECT_RET_OUT_BAD;
@@ -695,7 +695,7 @@ __skb_flow_dissect_gre(const struct sk_buff *skb,
keyid = __skb_header_pointer(skb, *p_nhoff + offset,
sizeof(_keyid),
- data, *p_hlen, &_keyid);
+ data, hlen, &_keyid);
if (!keyid)
return FLOW_DISSECT_RET_OUT_BAD;
@@ -715,27 +715,11 @@ __skb_flow_dissect_gre(const struct sk_buff *skb,
if (hdr->flags & GRE_SEQ)
offset += sizeof_field(struct pptp_gre_header, seq);
- if (gre_ver == 0) {
- if (*p_proto == htons(ETH_P_TEB)) {
- const struct ethhdr *eth;
- struct ethhdr _eth;
-
- eth = __skb_header_pointer(skb, *p_nhoff + offset,
- sizeof(_eth),
- data, *p_hlen, &_eth);
- if (!eth)
- return FLOW_DISSECT_RET_OUT_BAD;
- *p_proto = eth->h_proto;
- offset += sizeof(*eth);
-
- /* Cap headers that we access via pointers at the
- * end of the Ethernet header as our maximum alignment
- * at that point is only 2 bytes.
- */
- if (NET_IP_ALIGN)
- *p_hlen = *p_nhoff + offset;
- }
- } else { /* version 1, must be PPTP */
+ /* For GRE version 0 p_proto is already correctly set (including if
+ * it is ETH_P_TEB)
+ */
+
+ if (gre_ver == 1) { /* Version 1 is PPP */
u8 _ppp_hdr[PPP_HDRLEN];
u8 *ppp_hdr;
@@ -744,7 +728,7 @@ __skb_flow_dissect_gre(const struct sk_buff *skb,
ppp_hdr = __skb_header_pointer(skb, *p_nhoff + offset,
sizeof(_ppp_hdr),
- data, *p_hlen, _ppp_hdr);
+ data, hlen, _ppp_hdr);
if (!ppp_hdr)
return FLOW_DISSECT_RET_OUT_BAD;
@@ -1552,7 +1536,7 @@ bool __skb_flow_dissect(struct net *net,
fdret = __skb_flow_dissect_gre(skb, key_control, flow_dissector,
target_container, data,
- &proto, &nhoff, &hlen, flags);
+ &proto, &nhoff, hlen, flags);
break;
case NEXTHDR_HOP:
--
2.34.1
next prev parent reply other threads:[~2024-07-31 17:23 UTC|newest]
Thread overview: 36+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-07-31 17:23 [PATCH 00/12] flow_dissector: Dissect UDP encapsulation protocols Tom Herbert
2024-07-31 17:23 ` [PATCH 01/12] skbuff: Unconstantify struct net argument in flowdis functions Tom Herbert
2024-08-01 13:13 ` Willem de Bruijn
2024-08-02 13:33 ` Eric Dumazet
2024-08-15 18:50 ` Tom Herbert
2024-08-15 19:42 ` Tom Herbert
2024-07-31 17:23 ` [PATCH 02/12] flow_dissector: Parse ETH_P_TEB Tom Herbert
2024-08-01 13:12 ` Willem de Bruijn
2024-07-31 17:23 ` Tom Herbert [this message]
2024-08-01 13:13 ` [PATCH 03/12] flow_dissector: Move ETH_P_TEB out of GRE Willem de Bruijn
2024-07-31 17:23 ` [PATCH 04/12] udp_encaps: Add new UDP_ENCAP constants Tom Herbert
2024-08-01 13:22 ` Willem de Bruijn
2024-08-15 18:52 ` Tom Herbert
2024-07-31 17:23 ` [PATCH 05/12] udp_encaps: Set proper UDP_ENCAP types in tunnel setup Tom Herbert
2024-08-01 13:33 ` Willem de Bruijn
2024-07-31 17:23 ` [PATCH 06/12] flow_dissector: UDP encap infrastructure Tom Herbert
2024-08-01 13:58 ` Willem de Bruijn
2024-08-02 12:29 ` kernel test robot
2024-08-02 13:00 ` kernel test robot
2024-07-31 17:23 ` [PATCH 07/12] flow_dissector: Parse vxlan in UDP Tom Herbert
2024-08-01 18:22 ` Simon Horman
2024-08-03 3:26 ` kernel test robot
2024-07-31 17:23 ` [PATCH 08/12] flow_dissector: Parse foo-over-udp (FOU) Tom Herbert
2024-08-01 14:03 ` Willem de Bruijn
2024-07-31 17:23 ` [PATCH 09/12] flow_dissector: Parse ESP, L2TP, and SCTP in UDP Tom Herbert
2024-07-31 17:23 ` [PATCH 10/12] flow_dissector: Parse Geneve " Tom Herbert
2024-08-03 19:13 ` Willem de Bruijn
2024-08-03 19:19 ` Willem de Bruijn
2024-08-15 20:03 ` Tom Herbert
2024-07-31 17:23 ` [PATCH 11/12] flow_dissector: Parse GUE " Tom Herbert
2024-07-31 17:23 ` [PATCH 12/12] flow_dissector: Parse gtp " Tom Herbert
2024-08-03 19:30 ` Willem de Bruijn
2024-08-01 13:20 ` [PATCH 00/12] flow_dissector: Dissect UDP encapsulation protocols Willem de Bruijn
2024-08-14 20:28 ` Tom Herbert
2024-08-14 20:37 ` Tom Herbert
2024-08-01 16:16 ` Jakub Kicinski
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20240731172332.683815-4-tom@herbertland.com \
--to=tom@herbertland.com \
--cc=davem@davemloft.net \
--cc=edumazet@google.com \
--cc=felipe@sipanda.io \
--cc=kuba@kernel.org \
--cc=netdev@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).