* [PATCH v2] arm: dts: st: stm32mp151a-prtt1l: Fix QSPI configuration
@ 2024-08-09 8:21 Oleksij Rempel
2024-08-10 9:51 ` Simon Horman
2024-08-12 8:55 ` Ahmad Fatoum
0 siblings, 2 replies; 4+ messages in thread
From: Oleksij Rempel @ 2024-08-09 8:21 UTC (permalink / raw)
To: Maxime Coquelin, Alexandre Torgue, Rob Herring,
Krzysztof Kozlowski, Conor Dooley
Cc: Oleksij Rempel, kernel, linux-kernel, linux-stm32,
linux-arm-kernel, devicetree, netdev
Rename 'pins1' to 'pins' in the qspi_bk1_pins_a node to correct the
subnode name. The incorrect name caused the configuration to be
applied to the wrong subnode, resulting in QSPI not working properly.
To avoid this kind of regression, all references to pin configuration
nodes are now referenced directly using the format &{label/subnode}.
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
---
arch/arm/boot/dts/st/stm32mp151a-prtt1a.dts | 12 +-
arch/arm/boot/dts/st/stm32mp151a-prtt1c.dts | 108 +++++++---------
arch/arm/boot/dts/st/stm32mp151a-prtt1l.dtsi | 126 +++++++++----------
arch/arm/boot/dts/st/stm32mp151a-prtt1s.dts | 16 +--
4 files changed, 116 insertions(+), 146 deletions(-)
diff --git a/arch/arm/boot/dts/st/stm32mp151a-prtt1a.dts b/arch/arm/boot/dts/st/stm32mp151a-prtt1a.dts
index 75874eafde11e..8e1dd84e0c0a4 100644
--- a/arch/arm/boot/dts/st/stm32mp151a-prtt1a.dts
+++ b/arch/arm/boot/dts/st/stm32mp151a-prtt1a.dts
@@ -28,16 +28,12 @@ phy0: ethernet-phy@0 {
};
};
-&pwm5_pins_a {
- pins {
- pinmux = <STM32_PINMUX('A', 0, AF2)>; /* TIM5_CH1 */
- };
+&{pwm5_pins_a/pins} {
+ pinmux = <STM32_PINMUX('A', 0, AF2)>; /* TIM5_CH1 */
};
-&pwm5_sleep_pins_a {
- pins {
- pinmux = <STM32_PINMUX('A', 0, ANALOG)>; /* TIM5_CH1 */
- };
+&{pwm5_sleep_pins_a/pins} {
+ pinmux = <STM32_PINMUX('A', 0, ANALOG)>; /* TIM5_CH1 */
};
&timers5 {
diff --git a/arch/arm/boot/dts/st/stm32mp151a-prtt1c.dts b/arch/arm/boot/dts/st/stm32mp151a-prtt1c.dts
index c90d815f906b8..3b33b7093b686 100644
--- a/arch/arm/boot/dts/st/stm32mp151a-prtt1c.dts
+++ b/arch/arm/boot/dts/st/stm32mp151a-prtt1c.dts
@@ -168,52 +168,42 @@ &sdmmc2 {
status = "okay";
};
-&sdmmc2_b4_od_pins_a {
- pins1 {
- pinmux = <STM32_PINMUX('B', 14, AF9)>, /* SDMMC2_D0 */
- <STM32_PINMUX('B', 7, AF10)>, /* SDMMC2_D1 */
- <STM32_PINMUX('B', 3, AF9)>, /* SDMMC2_D2 */
- <STM32_PINMUX('B', 4, AF9)>; /* SDMMC2_D3 */
- };
+&{sdmmc2_b4_od_pins_a/pins1} {
+ pinmux = <STM32_PINMUX('B', 14, AF9)>, /* SDMMC2_D0 */
+ <STM32_PINMUX('B', 7, AF10)>, /* SDMMC2_D1 */
+ <STM32_PINMUX('B', 3, AF9)>, /* SDMMC2_D2 */
+ <STM32_PINMUX('B', 4, AF9)>; /* SDMMC2_D3 */
};
-&sdmmc2_b4_pins_a {
- pins1 {
- pinmux = <STM32_PINMUX('B', 14, AF9)>, /* SDMMC2_D0 */
- <STM32_PINMUX('B', 7, AF10)>, /* SDMMC2_D1 */
- <STM32_PINMUX('B', 3, AF9)>, /* SDMMC2_D2 */
- <STM32_PINMUX('B', 4, AF9)>, /* SDMMC2_D3 */
- <STM32_PINMUX('G', 6, AF10)>; /* SDMMC2_CMD */
- };
+&{sdmmc2_b4_pins_a/pins1} {
+ pinmux = <STM32_PINMUX('B', 14, AF9)>, /* SDMMC2_D0 */
+ <STM32_PINMUX('B', 7, AF10)>, /* SDMMC2_D1 */
+ <STM32_PINMUX('B', 3, AF9)>, /* SDMMC2_D2 */
+ <STM32_PINMUX('B', 4, AF9)>, /* SDMMC2_D3 */
+ <STM32_PINMUX('G', 6, AF10)>; /* SDMMC2_CMD */
};
-&sdmmc2_b4_sleep_pins_a {
- pins {
- pinmux = <STM32_PINMUX('B', 14, ANALOG)>, /* SDMMC2_D0 */
- <STM32_PINMUX('B', 7, ANALOG)>, /* SDMMC2_D1 */
- <STM32_PINMUX('B', 3, ANALOG)>, /* SDMMC2_D2 */
- <STM32_PINMUX('B', 4, ANALOG)>, /* SDMMC2_D3 */
- <STM32_PINMUX('E', 3, ANALOG)>, /* SDMMC2_CK */
- <STM32_PINMUX('G', 6, ANALOG)>; /* SDMMC2_CMD */
- };
+&{sdmmc2_b4_sleep_pins_a/pins} {
+ pinmux = <STM32_PINMUX('B', 14, ANALOG)>, /* SDMMC2_D0 */
+ <STM32_PINMUX('B', 7, ANALOG)>, /* SDMMC2_D1 */
+ <STM32_PINMUX('B', 3, ANALOG)>, /* SDMMC2_D2 */
+ <STM32_PINMUX('B', 4, ANALOG)>, /* SDMMC2_D3 */
+ <STM32_PINMUX('E', 3, ANALOG)>, /* SDMMC2_CK */
+ <STM32_PINMUX('G', 6, ANALOG)>; /* SDMMC2_CMD */
};
-&sdmmc2_d47_pins_a {
- pins {
- pinmux = <STM32_PINMUX('A', 8, AF9)>, /* SDMMC2_D4 */
- <STM32_PINMUX('A', 9, AF10)>, /* SDMMC2_D5 */
- <STM32_PINMUX('C', 6, AF10)>, /* SDMMC2_D6 */
- <STM32_PINMUX('C', 7, AF10)>; /* SDMMC2_D7 */
- };
+&{sdmmc2_d47_pins_a/pins} {
+ pinmux = <STM32_PINMUX('A', 8, AF9)>, /* SDMMC2_D4 */
+ <STM32_PINMUX('A', 9, AF10)>, /* SDMMC2_D5 */
+ <STM32_PINMUX('C', 6, AF10)>, /* SDMMC2_D6 */
+ <STM32_PINMUX('C', 7, AF10)>; /* SDMMC2_D7 */
};
-&sdmmc2_d47_sleep_pins_a {
- pins {
- pinmux = <STM32_PINMUX('A', 8, ANALOG)>, /* SDMMC2_D4 */
- <STM32_PINMUX('A', 9, ANALOG)>, /* SDMMC2_D5 */
- <STM32_PINMUX('C', 6, ANALOG)>, /* SDMMC2_D6 */
- <STM32_PINMUX('D', 3, ANALOG)>; /* SDMMC2_D7 */
- };
+&{sdmmc2_d47_sleep_pins_a/pins} {
+ pinmux = <STM32_PINMUX('A', 8, ANALOG)>, /* SDMMC2_D4 */
+ <STM32_PINMUX('A', 9, ANALOG)>, /* SDMMC2_D5 */
+ <STM32_PINMUX('C', 6, ANALOG)>, /* SDMMC2_D6 */
+ <STM32_PINMUX('D', 3, ANALOG)>; /* SDMMC2_D7 */
};
&sdmmc3 {
@@ -238,34 +228,28 @@ mmc@1 {
};
};
-&sdmmc3_b4_od_pins_b {
- pins1 {
- pinmux = <STM32_PINMUX('D', 1, AF10)>, /* SDMMC3_D0 */
- <STM32_PINMUX('D', 4, AF10)>, /* SDMMC3_D1 */
- <STM32_PINMUX('D', 5, AF10)>, /* SDMMC3_D2 */
- <STM32_PINMUX('D', 7, AF10)>; /* SDMMC3_D3 */
- };
+&{sdmmc3_b4_od_pins_b/pins1} {
+ pinmux = <STM32_PINMUX('D', 1, AF10)>, /* SDMMC3_D0 */
+ <STM32_PINMUX('D', 4, AF10)>, /* SDMMC3_D1 */
+ <STM32_PINMUX('D', 5, AF10)>, /* SDMMC3_D2 */
+ <STM32_PINMUX('D', 7, AF10)>; /* SDMMC3_D3 */
};
-&sdmmc3_b4_pins_b {
- pins1 {
- pinmux = <STM32_PINMUX('D', 1, AF10)>, /* SDMMC3_D0 */
- <STM32_PINMUX('D', 4, AF10)>, /* SDMMC3_D1 */
- <STM32_PINMUX('D', 5, AF10)>, /* SDMMC3_D2 */
- <STM32_PINMUX('D', 7, AF10)>, /* SDMMC3_D3 */
- <STM32_PINMUX('D', 0, AF10)>; /* SDMMC3_CMD */
- };
+&{sdmmc3_b4_pins_b/pins1} {
+ pinmux = <STM32_PINMUX('D', 1, AF10)>, /* SDMMC3_D0 */
+ <STM32_PINMUX('D', 4, AF10)>, /* SDMMC3_D1 */
+ <STM32_PINMUX('D', 5, AF10)>, /* SDMMC3_D2 */
+ <STM32_PINMUX('D', 7, AF10)>, /* SDMMC3_D3 */
+ <STM32_PINMUX('D', 0, AF10)>; /* SDMMC3_CMD */
};
-&sdmmc3_b4_sleep_pins_b {
- pins {
- pinmux = <STM32_PINMUX('D', 1, ANALOG)>, /* SDMMC3_D0 */
- <STM32_PINMUX('D', 4, ANALOG)>, /* SDMMC3_D1 */
- <STM32_PINMUX('D', 5, ANALOG)>, /* SDMMC3_D2 */
- <STM32_PINMUX('D', 7, ANALOG)>, /* SDMMC3_D3 */
- <STM32_PINMUX('G', 15, ANALOG)>, /* SDMMC3_CK */
- <STM32_PINMUX('D', 0, ANALOG)>; /* SDMMC3_CMD */
- };
+&{sdmmc3_b4_sleep_pins_b/pins} {
+ pinmux = <STM32_PINMUX('D', 1, ANALOG)>, /* SDMMC3_D0 */
+ <STM32_PINMUX('D', 4, ANALOG)>, /* SDMMC3_D1 */
+ <STM32_PINMUX('D', 5, ANALOG)>, /* SDMMC3_D2 */
+ <STM32_PINMUX('D', 7, ANALOG)>, /* SDMMC3_D3 */
+ <STM32_PINMUX('G', 15, ANALOG)>, /* SDMMC3_CK */
+ <STM32_PINMUX('D', 0, ANALOG)>; /* SDMMC3_CMD */
};
&spi1 {
diff --git a/arch/arm/boot/dts/st/stm32mp151a-prtt1l.dtsi b/arch/arm/boot/dts/st/stm32mp151a-prtt1l.dtsi
index 3938d357e198f..98a31c2b5d456 100644
--- a/arch/arm/boot/dts/st/stm32mp151a-prtt1l.dtsi
+++ b/arch/arm/boot/dts/st/stm32mp151a-prtt1l.dtsi
@@ -69,30 +69,27 @@ ðernet0 {
status = "okay";
};
-ðernet0_rmii_pins_a {
- pins1 {
- pinmux = <STM32_PINMUX('B', 12, AF11)>, /* ETH1_RMII_TXD0 */
- <STM32_PINMUX('B', 13, AF11)>, /* ETH1_RMII_TXD1 */
- <STM32_PINMUX('B', 11, AF11)>; /* ETH1_RMII_TX_EN */
- };
- pins2 {
- pinmux = <STM32_PINMUX('C', 4, AF11)>, /* ETH1_RMII_RXD0 */
- <STM32_PINMUX('C', 5, AF11)>, /* ETH1_RMII_RXD1 */
- <STM32_PINMUX('A', 1, AF11)>, /* ETH1_RMII_REF_CLK input */
- <STM32_PINMUX('A', 7, AF11)>; /* ETH1_RMII_CRS_DV */
- };
+&{ethernet0_rmii_pins_a/pins1} {
+ pinmux = <STM32_PINMUX('B', 12, AF11)>, /* ETH1_RMII_TXD0 */
+ <STM32_PINMUX('B', 13, AF11)>, /* ETH1_RMII_TXD1 */
+ <STM32_PINMUX('B', 11, AF11)>; /* ETH1_RMII_TX_EN */
};
-ðernet0_rmii_sleep_pins_a {
- pins1 {
- pinmux = <STM32_PINMUX('B', 12, ANALOG)>, /* ETH1_RMII_TXD0 */
- <STM32_PINMUX('B', 13, ANALOG)>, /* ETH1_RMII_TXD1 */
- <STM32_PINMUX('B', 11, ANALOG)>, /* ETH1_RMII_TX_EN */
- <STM32_PINMUX('C', 4, ANALOG)>, /* ETH1_RMII_RXD0 */
- <STM32_PINMUX('C', 5, ANALOG)>, /* ETH1_RMII_RXD1 */
- <STM32_PINMUX('A', 1, ANALOG)>, /* ETH1_RMII_REF_CLK */
- <STM32_PINMUX('A', 7, ANALOG)>; /* ETH1_RMII_CRS_DV */
- };
+&{ethernet0_rmii_pins_a/pins2} {
+ pinmux = <STM32_PINMUX('C', 4, AF11)>, /* ETH1_RMII_RXD0 */
+ <STM32_PINMUX('C', 5, AF11)>, /* ETH1_RMII_RXD1 */
+ <STM32_PINMUX('A', 1, AF11)>, /* ETH1_RMII_REF_CLK input */
+ <STM32_PINMUX('A', 7, AF11)>; /* ETH1_RMII_CRS_DV */
+};
+
+&{ethernet0_rmii_sleep_pins_a/pins1} {
+ pinmux = <STM32_PINMUX('B', 12, ANALOG)>, /* ETH1_RMII_TXD0 */
+ <STM32_PINMUX('B', 13, ANALOG)>, /* ETH1_RMII_TXD1 */
+ <STM32_PINMUX('B', 11, ANALOG)>, /* ETH1_RMII_TX_EN */
+ <STM32_PINMUX('C', 4, ANALOG)>, /* ETH1_RMII_RXD0 */
+ <STM32_PINMUX('C', 5, ANALOG)>, /* ETH1_RMII_RXD1 */
+ <STM32_PINMUX('A', 1, ANALOG)>, /* ETH1_RMII_REF_CLK */
+ <STM32_PINMUX('A', 7, ANALOG)>; /* ETH1_RMII_CRS_DV */
};
&iwdg2 {
@@ -122,12 +119,11 @@ flash@0 {
};
};
-&qspi_bk1_pins_a {
- pins1 {
- bias-pull-up;
- drive-push-pull;
- slew-rate = <1>;
- };
+&{qspi_bk1_pins_a/pins} {
+ /delete-property/ bias-disable;
+ bias-pull-up;
+ drive-push-pull;
+ slew-rate = <1>;
};
&rng1 {
@@ -147,22 +143,24 @@ &sdmmc1 {
status = "okay";
};
-&sdmmc1_b4_od_pins_a {
- pins1 {
- bias-pull-up;
- };
- pins2 {
- bias-pull-up;
- };
+&{sdmmc1_b4_od_pins_a/pins1} {
+ /delete-property/ bias-disable;
+ bias-pull-up;
};
-&sdmmc1_b4_pins_a {
- pins1 {
- bias-pull-up;
- };
- pins2 {
- bias-pull-up;
- };
+&{sdmmc1_b4_od_pins_a/pins2} {
+ /delete-property/ bias-disable;
+ bias-pull-up;
+};
+
+&{sdmmc1_b4_pins_a/pins1} {
+ /delete-property/ bias-disable;
+ bias-pull-up;
+};
+
+&{sdmmc1_b4_pins_a/pins2} {
+ /delete-property/ bias-disable;
+ bias-pull-up;
};
&uart4 {
@@ -175,34 +173,30 @@ &uart4 {
status = "okay";
};
-&uart4_idle_pins_a {
- pins1 {
- pinmux = <STM32_PINMUX('B', 9, ANALOG)>; /* UART4_TX */
- };
- pins2 {
- pinmux = <STM32_PINMUX('B', 2, AF8)>; /* UART4_RX */
- bias-pull-up;
- };
+&{uart4_idle_pins_a/pins1} {
+ pinmux = <STM32_PINMUX('B', 9, ANALOG)>; /* UART4_TX */
};
-&uart4_pins_a {
- pins1 {
- pinmux = <STM32_PINMUX('B', 9, AF8)>; /* UART4_TX */
- bias-disable;
- drive-push-pull;
- slew-rate = <0>;
- };
- pins2 {
- pinmux = <STM32_PINMUX('B', 2, AF8)>; /* UART4_RX */
- bias-pull-up;
- };
+&{uart4_idle_pins_a/pins2} {
+ pinmux = <STM32_PINMUX('B', 2, AF8)>; /* UART4_RX */
+ /delete-property/ bias-disable;
+ bias-pull-up;
};
-&uart4_sleep_pins_a {
- pins {
- pinmux = <STM32_PINMUX('B', 9, ANALOG)>, /* UART4_TX */
- <STM32_PINMUX('B', 2, ANALOG)>; /* UART4_RX */
- };
+&{uart4_pins_a/pins1} {
+ pinmux = <STM32_PINMUX('B', 9, AF8)>; /* UART4_TX */
+ slew-rate = <0>;
+};
+
+&{uart4_pins_a/pins2} {
+ pinmux = <STM32_PINMUX('B', 2, AF8)>; /* UART4_RX */
+ /delete-property/ bias-disable;
+ bias-pull-up;
+};
+
+&{uart4_sleep_pins_a/pins} {
+ pinmux = <STM32_PINMUX('B', 9, ANALOG)>, /* UART4_TX */
+ <STM32_PINMUX('B', 2, ANALOG)>; /* UART4_RX */
};
&usbh_ehci {
diff --git a/arch/arm/boot/dts/st/stm32mp151a-prtt1s.dts b/arch/arm/boot/dts/st/stm32mp151a-prtt1s.dts
index ad25929e64e6e..b6be61b159e72 100644
--- a/arch/arm/boot/dts/st/stm32mp151a-prtt1s.dts
+++ b/arch/arm/boot/dts/st/stm32mp151a-prtt1s.dts
@@ -36,18 +36,14 @@ co2-sensor@62 {
};
};
-&i2c1_pins_a {
- pins {
- pinmux = <STM32_PINMUX('D', 12, AF5)>, /* I2C1_SCL */
- <STM32_PINMUX('D', 13, AF5)>; /* I2C1_SDA */
- };
+&{i2c1_pins_a/pins} {
+ pinmux = <STM32_PINMUX('D', 12, AF5)>, /* I2C1_SCL */
+ <STM32_PINMUX('D', 13, AF5)>; /* I2C1_SDA */
};
-&i2c1_sleep_pins_a {
- pins {
- pinmux = <STM32_PINMUX('D', 12, ANALOG)>, /* I2C1_SCL */
- <STM32_PINMUX('D', 13, ANALOG)>; /* I2C1_SDA */
- };
+&{i2c1_sleep_pins_a/pins} {
+ pinmux = <STM32_PINMUX('D', 12, ANALOG)>, /* I2C1_SCL */
+ <STM32_PINMUX('D', 13, ANALOG)>; /* I2C1_SDA */
};
&mdio0 {
--
2.39.2
^ permalink raw reply related [flat|nested] 4+ messages in thread
* Re: [PATCH v2] arm: dts: st: stm32mp151a-prtt1l: Fix QSPI configuration
2024-08-09 8:21 [PATCH v2] arm: dts: st: stm32mp151a-prtt1l: Fix QSPI configuration Oleksij Rempel
@ 2024-08-10 9:51 ` Simon Horman
2024-08-11 14:41 ` Simon Horman
2024-08-12 8:55 ` Ahmad Fatoum
1 sibling, 1 reply; 4+ messages in thread
From: Simon Horman @ 2024-08-10 9:51 UTC (permalink / raw)
To: Oleksij Rempel
Cc: Maxime Coquelin, Alexandre Torgue, Rob Herring,
Krzysztof Kozlowski, Conor Dooley, kernel, linux-kernel,
linux-stm32, linux-arm-kernel, devicetree, netdev
On Fri, Aug 09, 2024 at 10:21:46AM +0200, Oleksij Rempel wrote:
> Rename 'pins1' to 'pins' in the qspi_bk1_pins_a node to correct the
> subnode name. The incorrect name caused the configuration to be
> applied to the wrong subnode, resulting in QSPI not working properly.
>
> To avoid this kind of regression, all references to pin configuration
> nodes are now referenced directly using the format &{label/subnode}.
>
> Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Pass
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [PATCH v2] arm: dts: st: stm32mp151a-prtt1l: Fix QSPI configuration
2024-08-10 9:51 ` Simon Horman
@ 2024-08-11 14:41 ` Simon Horman
0 siblings, 0 replies; 4+ messages in thread
From: Simon Horman @ 2024-08-11 14:41 UTC (permalink / raw)
To: Oleksij Rempel
Cc: Maxime Coquelin, Alexandre Torgue, Rob Herring,
Krzysztof Kozlowski, Conor Dooley, kernel, linux-kernel,
linux-stm32, linux-arm-kernel, devicetree, netdev
On Sat, Aug 10, 2024 at 10:51:29AM +0100, Simon Horman wrote:
> On Fri, Aug 09, 2024 at 10:21:46AM +0200, Oleksij Rempel wrote:
> > Rename 'pins1' to 'pins' in the qspi_bk1_pins_a node to correct the
> > subnode name. The incorrect name caused the configuration to be
> > applied to the wrong subnode, resulting in QSPI not working properly.
> >
> > To avoid this kind of regression, all references to pin configuration
> > nodes are now referenced directly using the format &{label/subnode}.
> >
> > Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
>
> Pass
Sorry about the noise here. This was supposed to be a note to myself, that
I am not planning to review this. It doesn't imply anything about the
patch.
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [PATCH v2] arm: dts: st: stm32mp151a-prtt1l: Fix QSPI configuration
2024-08-09 8:21 [PATCH v2] arm: dts: st: stm32mp151a-prtt1l: Fix QSPI configuration Oleksij Rempel
2024-08-10 9:51 ` Simon Horman
@ 2024-08-12 8:55 ` Ahmad Fatoum
1 sibling, 0 replies; 4+ messages in thread
From: Ahmad Fatoum @ 2024-08-12 8:55 UTC (permalink / raw)
To: Oleksij Rempel, Maxime Coquelin, Alexandre Torgue, Rob Herring,
Krzysztof Kozlowski, Conor Dooley
Cc: devicetree, netdev, linux-kernel, kernel, linux-stm32,
linux-arm-kernel
Hi,
On 09.08.24 10:21, Oleksij Rempel wrote:
> Rename 'pins1' to 'pins' in the qspi_bk1_pins_a node to correct the
> subnode name. The incorrect name caused the configuration to be
> applied to the wrong subnode, resulting in QSPI not working properly.
>
> To avoid this kind of regression, all references to pin configuration
> nodes are now referenced directly using the format &{label/subnode}.
>
> Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Reviewed-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
> +&{sdmmc1_b4_pins_a/pins2} {
> + /delete-property/ bias-disable;
Nit: a heads-up in the commit message would've been appropriate.
Same goes for driver-push-pull, which disappeared, because it was
redundant.
> + bias-pull-up;
> };
Cheers,
Ahmad
--
Pengutronix e.K. | |
Steuerwalder Str. 21 | http://www.pengutronix.de/ |
31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2024-08-12 8:55 UTC | newest]
Thread overview: 4+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2024-08-09 8:21 [PATCH v2] arm: dts: st: stm32mp151a-prtt1l: Fix QSPI configuration Oleksij Rempel
2024-08-10 9:51 ` Simon Horman
2024-08-11 14:41 ` Simon Horman
2024-08-12 8:55 ` Ahmad Fatoum
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).