[PATCH net v2] igb: cope with large MAX_SKB_FRAGS

[Corinna Vinschen <vinschen@redhat.com>]

From: Paolo Abeni <pabeni@redhat.com>

Sabrina reports that the igb driver does not cope well with large
MAX_SKB_FRAG values: setting MAX_SKB_FRAG to 45 causes payload
corruption on TX.

An easy reproducer is to run ssh to connect to the machine.  With
MAX_SKB_FRAGS=17 it works, with MAX_SKB_FRAGS=45 it fails.  This has
been reported originally in
https://bugzilla.redhat.com/show_bug.cgi?id=2265320

The root cause of the issue is that the driver does not take into
account properly the (possibly large) shared info size when selecting
the ring layout, and will try to fit two packets inside the same 4K
page even when the 1st fraglist will trump over the 2nd head.

Address the issue by checking if 2K buffers are insufficient.

Fixes: 3948b05950fd ("net: introduce a config option to tweak MAX_SKB_FRAGS")
Reported-by: Jan Tluka <jtluka@redhat.com>
Reported-by: Jirka Hladky <jhladky@redhat.com>
Reported-by: Sabrina Dubroca <sd@queasysnail.net>
Tested-by: Sabrina Dubroca <sd@queasysnail.net>
Tested-by: Corinna Vinschen <vinschen@redhat.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Corinna Vinschen <vinschen@redhat.com>
---
 drivers/net/ethernet/intel/igb/igb_main.c | 1 +
 1 file changed, 1 insertion(+)

v2: utilize IGB_2K_TOO_SMALL_WITH_PADDING

diff --git a/drivers/net/ethernet/intel/igb/igb_main.c b/drivers/net/ethernet/intel/igb/igb_main.c
index 11be39f435f3..33a42b4c21e0 100644
--- a/drivers/net/ethernet/intel/igb/igb_main.c
+++ b/drivers/net/ethernet/intel/igb/igb_main.c
@@ -4808,6 +4808,7 @@ static void igb_set_rx_buffer_len(struct igb_adapter *adapter,
 
 #if (PAGE_SIZE < 8192)
 	if (adapter->max_frame_size > IGB_MAX_FRAME_BUILD_SKB ||
+	    IGB_2K_TOO_SMALL_WITH_PADDING ||
 	    rd32(E1000_RCTL) & E1000_RCTL_SBP)
 		set_ring_uses_large_buffer(rx_ring);
 #endif
-- 
2.45.2