From: Simon Horman <horms@kernel.org>
To: Joseph Huang <joseph.huang.2024@gmail.com>
Cc: Andrew Lunn <andrew@lunn.ch>,
Joseph Huang <Joseph.Huang@garmin.com>,
netdev@vger.kernel.org, Florian Fainelli <f.fainelli@gmail.com>,
Vladimir Oltean <olteanv@gmail.com>,
"David S. Miller" <davem@davemloft.net>,
Eric Dumazet <edumazet@google.com>,
Jakub Kicinski <kuba@kernel.org>, Paolo Abeni <pabeni@redhat.com>,
linux-kernel@vger.kernel.org
Subject: Re: [PATCH net 1/1] net: dsa: mv88e6xxx: Fix out-of-bound access
Date: Wed, 21 Aug 2024 15:13:20 +0100 [thread overview]
Message-ID: <20240821141320.GA1722@kernel.org> (raw)
In-Reply-To: <5da4cc4d-2e68-424c-8d91-299d3ccb6dc8@gmail.com>
On Tue, Aug 20, 2024 at 03:21:57PM -0400, Joseph Huang wrote:
> On 8/20/2024 2:32 PM, Simon Horman wrote:
> > On Tue, Aug 20, 2024 at 12:58:05AM +0200, Andrew Lunn wrote:
> > > On Mon, Aug 19, 2024 at 06:26:40PM -0400, Joseph Huang wrote:
> > > > If an ATU violation was caused by a CPU Load operation, the SPID is 0xf,
> > > > which is larger than DSA_MAX_PORTS (the size of mv88e6xxx_chip.ports[]
> > > > array).
> > >
> > > The 6390X datasheet says "IF SPID = 0x1f the source of the violation
> > > was the CPU's registers interface."
> > >
> > > > +#define MV88E6XXX_G1_ATU_DATA_SPID_CPU 0x000f
> > >
> > > So it seems to depend on the family.
> > >
> > > > > /* Offset 0x0D: ATU MAC Address Register Bytes 0 & 1
> > > > * Offset 0x0E: ATU MAC Address Register Bytes 2 & 3
> > > > diff --git a/drivers/net/dsa/mv88e6xxx/global1_atu.c b/drivers/net/dsa/mv88e6xxx/global1_atu.c
> > > > index ce3b3690c3c0..b6f15ae22c20 100644
> > > > --- a/drivers/net/dsa/mv88e6xxx/global1_atu.c
> > > > +++ b/drivers/net/dsa/mv88e6xxx/global1_atu.c
> > > > @@ -457,7 +457,8 @@ static irqreturn_t mv88e6xxx_g1_atu_prob_irq_thread_fn(int irq, void *dev_id)
> > > > trace_mv88e6xxx_atu_full_violation(chip->dev, spid,
> > > > entry.portvec, entry.mac,
> > > > fid);
> > > > - chip->ports[spid].atu_full_violation++;
> > > > + if (spid != MV88E6XXX_G1_ATU_DATA_SPID_CPU)
> > > > + chip->ports[spid].atu_full_violation++;
> > >
> > > So i think it would be better to do something like:
> > >
> > > if (spid < ARRAY_SIZE(chip->ports))
> > > chip->ports[spid].atu_full_violation++;
> >
> > Hi Joseph,
> >
> > I am curious to know if bounds checking should also
> > be added to other accesses to chip->ports[spid] within this function.
> >
>
> Hi Simon,
>
> From the spec it is unclear to me whether the Load operation could actually
> cause other exceptions. I was only able to reproduce and verify the full
> violation, and that's why I only included that one in the patch.
>
> I guess we could proactively include the fix for other exceptions as well,
> but without a way to verify them, they could be just dead code and never be
> exercised. Perhaps people who are more familiar with the chip than me could
> chime in. I'm fine either way.
Thanks Joseph,
From my PoV it would be nice to add the checks unless we can be sure they
are not needed. But I do not feel strongly about this.
prev parent reply other threads:[~2024-08-21 14:13 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-08-19 22:26 [PATCH net 1/1] net: dsa: mv88e6xxx: Fix out-of-bound access Joseph Huang
2024-08-19 22:58 ` Andrew Lunn
2024-08-20 18:32 ` Simon Horman
2024-08-20 19:21 ` Joseph Huang
2024-08-21 14:13 ` Simon Horman [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20240821141320.GA1722@kernel.org \
--to=horms@kernel.org \
--cc=Joseph.Huang@garmin.com \
--cc=andrew@lunn.ch \
--cc=davem@davemloft.net \
--cc=edumazet@google.com \
--cc=f.fainelli@gmail.com \
--cc=joseph.huang.2024@gmail.com \
--cc=kuba@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=netdev@vger.kernel.org \
--cc=olteanv@gmail.com \
--cc=pabeni@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).