public inbox for netdev@vger.kernel.org
 help / color / mirror / Atom feed
From: Maxime Chevallier <maxime.chevallier@bootlin.com>
To: davem@davemloft.net
Cc: "Maxime Chevallier" <maxime.chevallier@bootlin.com>,
	netdev@vger.kernel.org, linux-kernel@vger.kernel.org,
	thomas.petazzoni@bootlin.com, "Andrew Lunn" <andrew@lunn.ch>,
	"Jakub Kicinski" <kuba@kernel.org>,
	"Eric Dumazet" <edumazet@google.com>,
	"Paolo Abeni" <pabeni@redhat.com>,
	"Russell King" <linux@armlinux.org.uk>,
	linux-arm-kernel@lists.infradead.org,
	"Christophe Leroy" <christophe.leroy@csgroup.eu>,
	"Herve Codina" <herve.codina@bootlin.com>,
	"Florian Fainelli" <f.fainelli@gmail.com>,
	"Heiner Kallweit" <hkallweit1@gmail.com>,
	"Vladimir Oltean" <vladimir.oltean@nxp.com>,
	"Köry Maincent" <kory.maincent@bootlin.com>,
	"Jesse Brandeburg" <jesse.brandeburg@intel.com>,
	"Marek Behún" <kabel@kernel.org>,
	"Piergiorgio Beruto" <piergiorgio.beruto@gmail.com>,
	"Oleksij Rempel" <o.rempel@pengutronix.de>,
	"Nicolò Veronese" <nicveronese@gmail.com>,
	"Simon Horman" <horms@kernel.org>,
	mwojtas@chromium.org, "Nathan Chancellor" <nathan@kernel.org>,
	"Antoine Tenart" <atenart@kernel.org>,
	"Marc Kleine-Budde" <mkl@pengutronix.de>,
	"Dan Carpenter" <dan.carpenter@linaro.org>,
	"Romain Gantois" <romain.gantois@bootlin.com>
Subject: [PATCH net-next v18 10/13] net: ethtool: pse-pd: Target the command to the requested PHY
Date: Wed, 21 Aug 2024 17:10:04 +0200	[thread overview]
Message-ID: <20240821151009.1681151-11-maxime.chevallier@bootlin.com> (raw)
In-Reply-To: <20240821151009.1681151-1-maxime.chevallier@bootlin.com>

PSE and PD configuration is a PHY-specific command. Instead of targeting
the command towards dev->phydev, use the request to pick the targeted
PHY device.

As we don't get the PHY directly from the netdev's attached phydev, also
adjust the error messages.

Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Tested-by: Christophe Leroy <christophe.leroy@csgroup.eu>
---
 net/ethtool/pse-pd.c | 31 +++++++++++++++++++------------
 1 file changed, 19 insertions(+), 12 deletions(-)

diff --git a/net/ethtool/pse-pd.c b/net/ethtool/pse-pd.c
index ff81aa749784..507cb21d6bf0 100644
--- a/net/ethtool/pse-pd.c
+++ b/net/ethtool/pse-pd.c
@@ -28,17 +28,15 @@ struct pse_reply_data {
 /* PSE_GET */
 
 const struct nla_policy ethnl_pse_get_policy[ETHTOOL_A_PSE_HEADER + 1] = {
-	[ETHTOOL_A_PSE_HEADER] = NLA_POLICY_NESTED(ethnl_header_policy),
+	[ETHTOOL_A_PSE_HEADER] = NLA_POLICY_NESTED(ethnl_header_policy_phy),
 };
 
-static int pse_get_pse_attributes(struct net_device *dev,
+static int pse_get_pse_attributes(struct phy_device *phydev,
 				  struct netlink_ext_ack *extack,
 				  struct pse_reply_data *data)
 {
-	struct phy_device *phydev = dev->phydev;
-
 	if (!phydev) {
-		NL_SET_ERR_MSG(extack, "No PHY is attached");
+		NL_SET_ERR_MSG(extack, "No PHY found");
 		return -EOPNOTSUPP;
 	}
 
@@ -58,13 +56,20 @@ static int pse_prepare_data(const struct ethnl_req_info *req_base,
 {
 	struct pse_reply_data *data = PSE_REPDATA(reply_base);
 	struct net_device *dev = reply_base->dev;
+	struct nlattr **tb = info->attrs;
+	struct phy_device *phydev;
 	int ret;
 
 	ret = ethnl_ops_begin(dev);
 	if (ret < 0)
 		return ret;
 
-	ret = pse_get_pse_attributes(dev, info->extack, data);
+	phydev = ethnl_req_get_phydev(req_base, tb[ETHTOOL_A_PSE_HEADER],
+				      info->extack);
+	if (IS_ERR(phydev))
+		return -ENODEV;
+
+	ret = pse_get_pse_attributes(phydev, info->extack, data);
 
 	ethnl_ops_complete(dev);
 
@@ -206,7 +211,7 @@ static void pse_cleanup_data(struct ethnl_reply_data *reply_base)
 /* PSE_SET */
 
 const struct nla_policy ethnl_pse_set_policy[ETHTOOL_A_PSE_MAX + 1] = {
-	[ETHTOOL_A_PSE_HEADER] = NLA_POLICY_NESTED(ethnl_header_policy),
+	[ETHTOOL_A_PSE_HEADER] = NLA_POLICY_NESTED(ethnl_header_policy_phy),
 	[ETHTOOL_A_PODL_PSE_ADMIN_CONTROL] =
 		NLA_POLICY_RANGE(NLA_U32, ETHTOOL_PODL_PSE_ADMIN_STATE_DISABLED,
 				 ETHTOOL_PODL_PSE_ADMIN_STATE_ENABLED),
@@ -219,12 +224,12 @@ const struct nla_policy ethnl_pse_set_policy[ETHTOOL_A_PSE_MAX + 1] = {
 static int
 ethnl_set_pse_validate(struct ethnl_req_info *req_info, struct genl_info *info)
 {
-	struct net_device *dev = req_info->dev;
 	struct nlattr **tb = info->attrs;
 	struct phy_device *phydev;
 
-	phydev = dev->phydev;
-	if (!phydev) {
+	phydev = ethnl_req_get_phydev(req_info, tb[ETHTOOL_A_PSE_HEADER],
+				      info->extack);
+	if (IS_ERR_OR_NULL(phydev)) {
 		NL_SET_ERR_MSG(info->extack, "No PHY is attached");
 		return -EOPNOTSUPP;
 	}
@@ -255,12 +260,14 @@ ethnl_set_pse_validate(struct ethnl_req_info *req_info, struct genl_info *info)
 static int
 ethnl_set_pse(struct ethnl_req_info *req_info, struct genl_info *info)
 {
-	struct net_device *dev = req_info->dev;
 	struct nlattr **tb = info->attrs;
 	struct phy_device *phydev;
 	int ret = 0;
 
-	phydev = dev->phydev;
+	phydev = ethnl_req_get_phydev(req_info, tb[ETHTOOL_A_PSE_HEADER],
+				      info->extack);
+	if (IS_ERR_OR_NULL(phydev))
+		return -ENODEV;
 
 	if (tb[ETHTOOL_A_C33_PSE_AVAIL_PW_LIMIT]) {
 		unsigned int pw_limit;
-- 
2.45.2


  parent reply	other threads:[~2024-08-21 15:10 UTC|newest]

Thread overview: 18+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2024-08-21 15:09 [PATCH net-next v18 00/13] Introduce PHY listing and link_topology tracking Maxime Chevallier
2024-08-21 15:09 ` [PATCH net-next v18 01/13] net: phy: Introduce ethernet link topology representation Maxime Chevallier
2024-08-21 15:09 ` [PATCH net-next v18 02/13] net: sfp: pass the phy_device when disconnecting an sfp module's PHY Maxime Chevallier
2024-08-21 15:09 ` [PATCH net-next v18 03/13] net: phy: add helpers to handle sfp phy connect/disconnect Maxime Chevallier
2024-08-21 15:09 ` [PATCH net-next v18 04/13] net: sfp: Add helper to return the SFP bus name Maxime Chevallier
2024-08-21 15:09 ` [PATCH net-next v18 05/13] net: ethtool: Allow passing a phy index for some commands Maxime Chevallier
2024-08-21 15:10 ` [PATCH net-next v18 06/13] netlink: specs: add phy-index as a header parameter Maxime Chevallier
2024-08-21 15:10 ` [PATCH net-next v18 07/13] net: ethtool: Introduce a command to list PHYs on an interface Maxime Chevallier
2024-09-10 16:41   ` Eric Dumazet
2024-09-10 17:20     ` Maxime Chevallier
2024-09-10 17:23       ` Eric Dumazet
2024-08-21 15:10 ` [PATCH net-next v18 08/13] netlink: specs: add ethnl PHY_GET command set Maxime Chevallier
2024-08-21 15:10 ` [PATCH net-next v18 09/13] net: ethtool: plca: Target the command to the requested PHY Maxime Chevallier
2024-08-21 15:10 ` Maxime Chevallier [this message]
2024-08-21 15:10 ` [PATCH net-next v18 11/13] net: ethtool: cable-test: " Maxime Chevallier
2024-08-21 15:10 ` [PATCH net-next v18 12/13] net: ethtool: strset: Allow querying phy stats by index Maxime Chevallier
2024-08-21 15:10 ` [PATCH net-next v18 13/13] Documentation: networking: document phy_link_topology Maxime Chevallier
2024-08-23 12:10 ` [PATCH net-next v18 00/13] Introduce PHY listing and link_topology tracking patchwork-bot+netdevbpf

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20240821151009.1681151-11-maxime.chevallier@bootlin.com \
    --to=maxime.chevallier@bootlin.com \
    --cc=andrew@lunn.ch \
    --cc=atenart@kernel.org \
    --cc=christophe.leroy@csgroup.eu \
    --cc=dan.carpenter@linaro.org \
    --cc=davem@davemloft.net \
    --cc=edumazet@google.com \
    --cc=f.fainelli@gmail.com \
    --cc=herve.codina@bootlin.com \
    --cc=hkallweit1@gmail.com \
    --cc=horms@kernel.org \
    --cc=jesse.brandeburg@intel.com \
    --cc=kabel@kernel.org \
    --cc=kory.maincent@bootlin.com \
    --cc=kuba@kernel.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux@armlinux.org.uk \
    --cc=mkl@pengutronix.de \
    --cc=mwojtas@chromium.org \
    --cc=nathan@kernel.org \
    --cc=netdev@vger.kernel.org \
    --cc=nicveronese@gmail.com \
    --cc=o.rempel@pengutronix.de \
    --cc=pabeni@redhat.com \
    --cc=piergiorgio.beruto@gmail.com \
    --cc=romain.gantois@bootlin.com \
    --cc=thomas.petazzoni@bootlin.com \
    --cc=vladimir.oltean@nxp.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox