From: Jacky Chou <jacky_chou@aspeedtech.com>
To: <davem@davemloft.net>, <edumazet@google.com>, <kuba@kernel.org>,
<pabeni@redhat.com>, <jacky_chou@aspeedtech.com>,
<u.kleine-koenig@pengutronix.de>, <netdev@vger.kernel.org>,
<linux-kernel@vger.kernel.org>
Subject: [PATCH] net: ftgmac100: Ensure tx descriptor updates are visible
Date: Thu, 22 Aug 2024 15:30:06 +0800 [thread overview]
Message-ID: <20240822073006.817173-1-jacky_chou@aspeedtech.com> (raw)
The driver must ensure TX descriptor updates are visible
before updating TX pointer and TX clear pointer.
This resolves TX hangs observed on AST2600 when running
iperf3.
Signed-off-by: Jacky Chou <jacky_chou@aspeedtech.com>
---
drivers/net/ethernet/faraday/ftgmac100.c | 26 ++++++++++++++++--------
1 file changed, 18 insertions(+), 8 deletions(-)
diff --git a/drivers/net/ethernet/faraday/ftgmac100.c b/drivers/net/ethernet/faraday/ftgmac100.c
index 93862b027be0..9c521d0af7ac 100644
--- a/drivers/net/ethernet/faraday/ftgmac100.c
+++ b/drivers/net/ethernet/faraday/ftgmac100.c
@@ -582,7 +582,7 @@ static bool ftgmac100_rx_packet(struct ftgmac100 *priv, int *processed)
(*processed)++;
return true;
- drop:
+drop:
/* Clean rxdes0 (which resets own bit) */
rxdes->rxdes0 = cpu_to_le32(status & priv->rxdes0_edorr_mask);
priv->rx_pointer = ftgmac100_next_rx_pointer(priv, pointer);
@@ -666,6 +666,11 @@ static bool ftgmac100_tx_complete_packet(struct ftgmac100 *priv)
ftgmac100_free_tx_packet(priv, pointer, skb, txdes, ctl_stat);
txdes->txdes0 = cpu_to_le32(ctl_stat & priv->txdes0_edotr_mask);
+ /* Ensure the descriptor config is visible before setting the tx
+ * pointer.
+ */
+ smp_wmb();
+
priv->tx_clean_pointer = ftgmac100_next_tx_pointer(priv, pointer);
return true;
@@ -819,6 +824,11 @@ static netdev_tx_t ftgmac100_hard_start_xmit(struct sk_buff *skb,
dma_wmb();
first->txdes0 = cpu_to_le32(f_ctl_stat);
+ /* Ensure the descriptor config is visible before setting the tx
+ * pointer.
+ */
+ smp_wmb();
+
/* Update next TX pointer */
priv->tx_pointer = pointer;
@@ -839,7 +849,7 @@ static netdev_tx_t ftgmac100_hard_start_xmit(struct sk_buff *skb,
return NETDEV_TX_OK;
- dma_err:
+dma_err:
if (net_ratelimit())
netdev_err(netdev, "map tx fragment failed\n");
@@ -861,7 +871,7 @@ static netdev_tx_t ftgmac100_hard_start_xmit(struct sk_buff *skb,
* last fragment, so we know ftgmac100_free_tx_packet()
* hasn't freed the skb yet.
*/
- drop:
+drop:
/* Drop the packet */
dev_kfree_skb_any(skb);
netdev->stats.tx_dropped++;
@@ -1354,7 +1364,7 @@ static void ftgmac100_reset(struct ftgmac100 *priv)
ftgmac100_init_all(priv, true);
netdev_dbg(netdev, "Reset done !\n");
- bail:
+bail:
if (priv->mii_bus)
mutex_unlock(&priv->mii_bus->mdio_lock);
if (netdev->phydev)
@@ -1554,15 +1564,15 @@ static int ftgmac100_open(struct net_device *netdev)
return 0;
- err_ncsi:
+err_ncsi:
napi_disable(&priv->napi);
netif_stop_queue(netdev);
- err_alloc:
+err_alloc:
ftgmac100_free_buffers(priv);
free_irq(netdev->irq, netdev);
- err_irq:
+err_irq:
netif_napi_del(&priv->napi);
- err_hw:
+err_hw:
iowrite32(0, priv->base + FTGMAC100_OFFSET_IER);
ftgmac100_free_rings(priv);
return err;
--
2.25.1
next reply other threads:[~2024-08-22 7:30 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-08-22 7:30 Jacky Chou [this message]
2024-08-26 13:10 ` [PATCH] net: ftgmac100: Ensure tx descriptor updates are visible patchwork-bot+netdevbpf
2024-09-09 5:44 ` Joel Stanley
-- strict thread matches above, loose matches on Subject: below --
2020-10-20 22:06 Joel Stanley
2020-10-21 0:00 ` Benjamin Herrenschmidt
2020-10-21 3:37 ` Joel Stanley
2020-10-21 8:18 ` David Laight
2020-10-22 7:37 ` Benjamin Herrenschmidt
2020-10-21 12:40 ` Arnd Bergmann
2020-10-22 6:35 ` Joel Stanley
2020-10-22 7:41 ` Benjamin Herrenschmidt
2020-10-28 4:47 ` Joel Stanley
2020-10-28 10:51 ` Arnd Bergmann
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20240822073006.817173-1-jacky_chou@aspeedtech.com \
--to=jacky_chou@aspeedtech.com \
--cc=davem@davemloft.net \
--cc=edumazet@google.com \
--cc=kuba@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=netdev@vger.kernel.org \
--cc=pabeni@redhat.com \
--cc=u.kleine-koenig@pengutronix.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).