netdev.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Sasha Levin <sashal@kernel.org>
To: linux-kernel@vger.kernel.org, stable@vger.kernel.org
Cc: Foster Snowhill <forst@pen.gy>, Georgi Valkov <gvalkov@gmail.com>,
	"David S . Miller" <davem@davemloft.net>,
	Sasha Levin <sashal@kernel.org>,
	edumazet@google.com, kuba@kernel.org, pabeni@redhat.com,
	oneukum@suse.com, linux-usb@vger.kernel.org,
	netdev@vger.kernel.org
Subject: [PATCH AUTOSEL 6.6 07/20] usbnet: ipheth: fix carrier detection in modes 1 and 4
Date: Fri, 23 Aug 2024 10:02:21 -0400	[thread overview]
Message-ID: <20240823140309.1974696-7-sashal@kernel.org> (raw)
In-Reply-To: <20240823140309.1974696-1-sashal@kernel.org>

From: Foster Snowhill <forst@pen.gy>

[ Upstream commit 67927a1b255d883881be9467508e0af9a5e0be9d ]

Apart from the standard "configurations", "interfaces" and "alternate
interface settings" in USB, iOS devices also have a notion of
"modes". In different modes, the device exposes a different set of
available configurations.

Depending on the iOS version, and depending on the current mode, the
length and contents of the carrier state control message differs:

* 1 byte (seen on iOS 4.2.1, 8.4):
    * 03: carrier off (mode 0)
    * 04: carrier on (mode 0)
* 3 bytes (seen on iOS 10.3.4, 15.7.6):
    * 03 03 03: carrier off (mode 0)
    * 04 04 03: carrier on (mode 0)
* 4 bytes (seen on iOS 16.5, 17.6):
    * 03 03 03 00: carrier off (mode 0)
    * 04 03 03 00: carrier off (mode 1)
    * 06 03 03 00: carrier off (mode 4)
    * 04 04 03 04: carrier on (mode 0 and 1)
    * 06 04 03 04: carrier on (mode 4)

Before this change, the driver always used the first byte of the
response to determine carrier state.

From this larger sample, the first byte seems to indicate the number of
available USB configurations in the current mode (with the exception of
the default mode 0), and in some cases (namely mode 1 and 4) does not
correlate with the carrier state.

Previous logic erroneously counted `04 03 03 00` as "carrier on" and
`06 04 03 04` as "carrier off" on iOS versions that support mode 1 and
mode 4 respectively.

Only modes 0, 1 and 4 expose the USB Ethernet interfaces necessary for
the ipheth driver.

Check the second byte of the control message where possible, and fall
back to checking the first byte on older iOS versions.

Signed-off-by: Foster Snowhill <forst@pen.gy>
Tested-by: Georgi Valkov <gvalkov@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/usb/ipheth.c | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

diff --git a/drivers/net/usb/ipheth.c b/drivers/net/usb/ipheth.c
index cdc72559790a6..46afb95ffabe3 100644
--- a/drivers/net/usb/ipheth.c
+++ b/drivers/net/usb/ipheth.c
@@ -355,13 +355,14 @@ static int ipheth_carrier_set(struct ipheth_device *dev)
 			0x02, /* index */
 			dev->ctrl_buf, IPHETH_CTRL_BUF_SIZE,
 			IPHETH_CTRL_TIMEOUT);
-	if (retval < 0) {
+	if (retval <= 0) {
 		dev_err(&dev->intf->dev, "%s: usb_control_msg: %d\n",
 			__func__, retval);
 		return retval;
 	}
 
-	if (dev->ctrl_buf[0] == IPHETH_CARRIER_ON) {
+	if ((retval == 1 && dev->ctrl_buf[0] == IPHETH_CARRIER_ON) ||
+	    (retval >= 2 && dev->ctrl_buf[1] == IPHETH_CARRIER_ON)) {
 		netif_carrier_on(dev->net);
 		if (dev->tx_urb->status != -EINPROGRESS)
 			netif_wake_queue(dev->net);
-- 
2.43.0


  parent reply	other threads:[~2024-08-23 14:03 UTC|newest]

Thread overview: 9+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
     [not found] <20240823140309.1974696-1-sashal@kernel.org>
2024-08-23 14:02 ` [PATCH AUTOSEL 6.6 03/20] usbnet: ipheth: race between ipheth_close and error handling Sasha Levin
2024-08-23 14:02 ` [PATCH AUTOSEL 6.6 04/20] usbnet: ipheth: remove extraneous rx URB length check Sasha Levin
2024-08-23 14:02 ` [PATCH AUTOSEL 6.6 05/20] usbnet: ipheth: drop RX URBs with no payload Sasha Levin
2024-08-23 14:02 ` [PATCH AUTOSEL 6.6 06/20] usbnet: ipheth: do not stop RX on failing RX callback Sasha Levin
2024-08-23 14:02 ` Sasha Levin [this message]
2024-08-23 14:02 ` [PATCH AUTOSEL 6.6 10/20] net: ethernet: use ip_hdrlen() instead of bit shift Sasha Levin
2024-08-23 14:02 ` [PATCH AUTOSEL 6.6 13/20] net: phy: vitesse: repair vsc73xx autonegotiation Sasha Levin
2024-08-23 14:02 ` [PATCH AUTOSEL 6.6 19/20] net: hns3: use correct release function during uninitialization Sasha Levin
     [not found] <20241012112715.1763241-1-sashal@kernel.org>
2024-10-12 11:26 ` [PATCH AUTOSEL 6.6 07/20] usbnet: ipheth: fix carrier detection in modes 1 and 4 Sasha Levin

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20240823140309.1974696-7-sashal@kernel.org \
    --to=sashal@kernel.org \
    --cc=davem@davemloft.net \
    --cc=edumazet@google.com \
    --cc=forst@pen.gy \
    --cc=gvalkov@gmail.com \
    --cc=kuba@kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-usb@vger.kernel.org \
    --cc=netdev@vger.kernel.org \
    --cc=oneukum@suse.com \
    --cc=pabeni@redhat.com \
    --cc=stable@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).