[net-next v2 0/9] net: convert to devm_clk_get_enabled() and devm_clk_get_optional_enabled()

[net-next v2 0/9] net: convert to devm_clk_get_enabled() and devm_clk_get_optional_enabled()

[Yangtao Li]

This patchset simplify code w/ devm_clk_get*_enabled() API.

v2:
-remove unused 'ret'
-fix incompatible-pointer-types
-get rid of amount of variables used

Yangtao Li (9):
  net: stmmac: dwmac-intel-plat: Convert to devm_clk_get_enabled()
  net: stmmac: platform: Convert to devm_clk_get_enabled() and
    devm_clk_get_optional_enabled()
  net: ethernet: cortina: Convert to devm_clk_get_enabled()
  net: mdio: hisi-femac: Convert to devm_clk_get_enabled()
  net: dsa: rzn1_a5psw: Convert to devm_clk_get_enabled()
  net: ethernet: broadcom: bcm63xx_enet: Convert to
    devm_clk_get_enabled()
  net: ethernet: marvell: mvneta: Convert to devm_clk_get_enabled()
  net: mvpp2: Convert to devm_clk_get_enabled() and
    devm_clk_get_optional_enabled()
  net: marvell: pxa168_eth: Convert to devm_clk_get_enabled()

 drivers/net/dsa/rzn1_a5psw.c                  | 22 +----
 drivers/net/ethernet/broadcom/bcm63xx_enet.c  | 47 +++-------
 drivers/net/ethernet/broadcom/bcm63xx_enet.h  |  6 --
 drivers/net/ethernet/cortina/gemini.c         | 25 ++----
 drivers/net/ethernet/marvell/mvneta_bm.c      | 16 ++--
 drivers/net/ethernet/marvell/mvneta_bm.h      |  1 -
 drivers/net/ethernet/marvell/mvpp2/mvpp2.h    |  7 --
 .../net/ethernet/marvell/mvpp2/mvpp2_main.c   | 89 +++++--------------
 drivers/net/ethernet/marvell/pxa168_eth.c     | 17 +---
 .../stmicro/stmmac/dwmac-intel-plat.c         | 11 +--
 .../ethernet/stmicro/stmmac/stmmac_platform.c | 35 ++------
 drivers/net/mdio/mdio-hisi-femac.c            | 18 ++--
 12 files changed, 73 insertions(+), 221 deletions(-)

-- 
2.39.0

[net-next v2 1/9] net: stmmac: dwmac-intel-plat: Convert to devm_clk_get_enabled()

[Yangtao Li]

Convert devm_clk_get(), clk_prepare_enable() to a single
call to devm_clk_get_enabled(), as this is exactly
what this function does.

Signed-off-by: Yangtao Li <frank.li@vivo.com>
Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
---
 .../net/ethernet/stmicro/stmmac/dwmac-intel-plat.c    | 11 ++---------
 1 file changed, 2 insertions(+), 9 deletions(-)

diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-intel-plat.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-intel-plat.c
index d68f0c4e7835..dcbae653ab8c 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac-intel-plat.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-intel-plat.c
@@ -104,12 +104,10 @@ static int intel_eth_plat_probe(struct platform_device *pdev)
 
 		/* Enable TX clock */
 		if (dwmac->data->tx_clk_en) {
-			dwmac->tx_clk = devm_clk_get(&pdev->dev, "tx_clk");
+			dwmac->tx_clk = devm_clk_get_enabled(&pdev->dev, "tx_clk");
 			if (IS_ERR(dwmac->tx_clk))
 				return PTR_ERR(dwmac->tx_clk);
 
-			clk_prepare_enable(dwmac->tx_clk);
-
 			/* Check and configure TX clock rate */
 			rate = clk_get_rate(dwmac->tx_clk);
 			if (dwmac->data->tx_clk_rate &&
@@ -149,20 +147,15 @@ static int intel_eth_plat_probe(struct platform_device *pdev)
 	}
 
 	ret = stmmac_dvr_probe(&pdev->dev, plat_dat, &stmmac_res);
-	if (ret) {
-		clk_disable_unprepare(dwmac->tx_clk);
+	if (ret)
 		return ret;
-	}
 
 	return 0;
 }
 
 static void intel_eth_plat_remove(struct platform_device *pdev)
 {
-	struct intel_dwmac *dwmac = get_stmmac_bsp_priv(&pdev->dev);
-
 	stmmac_pltfr_remove(pdev);
-	clk_disable_unprepare(dwmac->tx_clk);
 }
 
 static struct platform_driver intel_eth_plat_driver = {
-- 
2.39.0

[net-next v2 2/9] net: stmmac: platform: Convert to devm_clk_get_enabled() and devm_clk_get_optional_enabled()

[Yangtao Li]

Use devm_clk_get_enabled() and devm_clk_get_optional_enabled()
to simplify code.

Signed-off-by: Yangtao Li <frank.li@vivo.com>
Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
---
v2:
-remove unused 'ret'
-fix incompatible-pointer-types

 .../ethernet/stmicro/stmmac/stmmac_platform.c | 35 +++++--------------
 1 file changed, 8 insertions(+), 27 deletions(-)

diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c
index ad868e8d195d..1a66baaa4081 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c
@@ -415,8 +415,6 @@ static int stmmac_of_get_mac_mode(struct device_node *np)
 static void stmmac_remove_config_dt(struct platform_device *pdev,
 				    struct plat_stmmacenet_data *plat)
 {
-	clk_disable_unprepare(plat->stmmac_clk);
-	clk_disable_unprepare(plat->pclk);
 	of_node_put(plat->phy_node);
 	of_node_put(plat->mdio_node);
 }
@@ -436,7 +434,6 @@ stmmac_probe_config_dt(struct platform_device *pdev, u8 *mac)
 	struct plat_stmmacenet_data *plat;
 	struct stmmac_dma_cfg *dma_cfg;
 	int phy_mode;
-	void *ret;
 	int rc;
 
 	plat = devm_kzalloc(&pdev->dev, sizeof(*plat), GFP_KERNEL);
@@ -615,21 +612,16 @@ stmmac_probe_config_dt(struct platform_device *pdev, u8 *mac)
 
 	/* clock setup */
 	if (!of_device_is_compatible(np, "snps,dwc-qos-ethernet-4.10")) {
-		plat->stmmac_clk = devm_clk_get(&pdev->dev,
-						STMMAC_RESOURCE_NAME);
+		plat->stmmac_clk = devm_clk_get_enabled(&pdev->dev, STMMAC_RESOURCE_NAME);
 		if (IS_ERR(plat->stmmac_clk)) {
 			dev_warn(&pdev->dev, "Cannot get CSR clock\n");
 			plat->stmmac_clk = NULL;
 		}
-		clk_prepare_enable(plat->stmmac_clk);
 	}
 
-	plat->pclk = devm_clk_get_optional(&pdev->dev, "pclk");
-	if (IS_ERR(plat->pclk)) {
-		ret = plat->pclk;
-		goto error_pclk_get;
-	}
-	clk_prepare_enable(plat->pclk);
+	plat->pclk = devm_clk_get_optional_enabled(&pdev->dev, "pclk");
+	if (IS_ERR(plat->pclk))
+		return (void *)plat->pclk;
 
 	/* Fall-back to main clock in case of no PTP ref is passed */
 	plat->clk_ptp_ref = devm_clk_get(&pdev->dev, "ptp_ref");
@@ -644,26 +636,15 @@ stmmac_probe_config_dt(struct platform_device *pdev, u8 *mac)
 
 	plat->stmmac_rst = devm_reset_control_get_optional(&pdev->dev,
 							   STMMAC_RESOURCE_NAME);
-	if (IS_ERR(plat->stmmac_rst)) {
-		ret = plat->stmmac_rst;
-		goto error_hw_init;
-	}
+	if (IS_ERR(plat->stmmac_rst))
+		return (void *)plat->stmmac_rst;
 
 	plat->stmmac_ahb_rst = devm_reset_control_get_optional_shared(
 							&pdev->dev, "ahb");
-	if (IS_ERR(plat->stmmac_ahb_rst)) {
-		ret = plat->stmmac_ahb_rst;
-		goto error_hw_init;
-	}
+	if (IS_ERR(plat->stmmac_ahb_rst))
+		return (void *)plat->stmmac_ahb_rst;
 
 	return plat;
-
-error_hw_init:
-	clk_disable_unprepare(plat->pclk);
-error_pclk_get:
-	clk_disable_unprepare(plat->stmmac_clk);
-
-	return ret;
 }
 
 static void devm_stmmac_remove_config_dt(void *data)
-- 
2.39.0

[net-next v2 3/9] net: ethernet: cortina: Convert to devm_clk_get_enabled()

[Yangtao Li]

Convert devm_clk_get(), clk_prepare_enable() to a single
call to devm_clk_get_enabled(), as this is exactly
what this function does.

Signed-off-by: Yangtao Li <frank.li@vivo.com>
Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
---
 drivers/net/ethernet/cortina/gemini.c | 25 ++++++++-----------------
 1 file changed, 8 insertions(+), 17 deletions(-)

diff --git a/drivers/net/ethernet/cortina/gemini.c b/drivers/net/ethernet/cortina/gemini.c
index 73e1c71c5092..90a14e03a782 100644
--- a/drivers/net/ethernet/cortina/gemini.c
+++ b/drivers/net/ethernet/cortina/gemini.c
@@ -109,7 +109,6 @@ struct gemini_ethernet_port {
 	struct device *dev;
 	void __iomem *dma_base;
 	void __iomem *gmac_base;
-	struct clk *pclk;
 	struct reset_control *reset;
 	int irq;
 	__le32 mac_addr[3];
@@ -2326,7 +2325,6 @@ static void gemini_port_remove(struct gemini_ethernet_port *port)
 		phy_disconnect(port->netdev->phydev);
 		unregister_netdev(port->netdev);
 	}
-	clk_disable_unprepare(port->pclk);
 	geth_cleanup_freeq(port->geth);
 }
 
@@ -2403,6 +2401,7 @@ static int gemini_ethernet_port_probe(struct platform_device *pdev)
 	struct device *parent;
 	u8 mac[ETH_ALEN];
 	unsigned int id;
+	struct clk *pclk;
 	int irq;
 	int ret;
 
@@ -2453,14 +2452,11 @@ static int gemini_ethernet_port_probe(struct platform_device *pdev)
 	port->irq = irq;
 
 	/* Clock the port */
-	port->pclk = devm_clk_get(dev, "PCLK");
-	if (IS_ERR(port->pclk)) {
+	pclk = devm_clk_get_enabled(dev, "PCLK");
+	if (IS_ERR(pclk)) {
 		dev_err(dev, "no PCLK\n");
-		return PTR_ERR(port->pclk);
+		return PTR_ERR(pclk);
 	}
-	ret = clk_prepare_enable(port->pclk);
-	if (ret)
-		return ret;
 
 	/* Maybe there is a nice ethernet address we should use */
 	gemini_port_save_mac_addr(port);
@@ -2469,8 +2465,7 @@ static int gemini_ethernet_port_probe(struct platform_device *pdev)
 	port->reset = devm_reset_control_get_exclusive(dev, NULL);
 	if (IS_ERR(port->reset)) {
 		dev_err(dev, "no reset\n");
-		ret = PTR_ERR(port->reset);
-		goto unprepare;
+		return PTR_ERR(port->reset);
 	}
 	reset_control_reset(port->reset);
 	usleep_range(100, 500);
@@ -2532,24 +2527,20 @@ static int gemini_ethernet_port_probe(struct platform_device *pdev)
 					port_names[port->id],
 					port);
 	if (ret)
-		goto unprepare;
+		return ret;
 
 	ret = gmac_setup_phy(netdev);
 	if (ret) {
 		netdev_err(netdev,
 			   "PHY init failed\n");
-		goto unprepare;
+		return ret;
 	}
 
 	ret = register_netdev(netdev);
 	if (ret)
-		goto unprepare;
+		return ret;
 
 	return 0;
-
-unprepare:
-	clk_disable_unprepare(port->pclk);
-	return ret;
 }
 
 static void gemini_ethernet_port_remove(struct platform_device *pdev)
-- 
2.39.0

[net-next v2 4/9] net: mdio: hisi-femac: Convert to devm_clk_get_enabled()

[Yangtao Li]

Convert devm_clk_get(), clk_prepare_enable() to a single
call to devm_clk_get_enabled(), as this is exactly
what this function does.

Signed-off-by: Yangtao Li <frank.li@vivo.com>
---
 drivers/net/mdio/mdio-hisi-femac.c | 18 +++++-------------
 1 file changed, 5 insertions(+), 13 deletions(-)

diff --git a/drivers/net/mdio/mdio-hisi-femac.c b/drivers/net/mdio/mdio-hisi-femac.c
index 6703f626ee83..f6fcb9e11624 100644
--- a/drivers/net/mdio/mdio-hisi-femac.c
+++ b/drivers/net/mdio/mdio-hisi-femac.c
@@ -21,7 +21,6 @@
 #define BIT_WR_DATA_OFFSET	16
 
 struct hisi_femac_mdio_data {
-	struct clk *clk;
 	void __iomem *membase;
 };
 
@@ -74,6 +73,7 @@ static int hisi_femac_mdio_probe(struct platform_device *pdev)
 	struct device_node *np = pdev->dev.of_node;
 	struct mii_bus *bus;
 	struct hisi_femac_mdio_data *data;
+	struct clk *clk;
 	int ret;
 
 	bus = mdiobus_alloc_size(sizeof(*data));
@@ -93,26 +93,20 @@ static int hisi_femac_mdio_probe(struct platform_device *pdev)
 		goto err_out_free_mdiobus;
 	}
 
-	data->clk = devm_clk_get(&pdev->dev, NULL);
-	if (IS_ERR(data->clk)) {
-		ret = PTR_ERR(data->clk);
+	clk = devm_clk_get_prepared(&pdev->dev, NULL);
+	if (IS_ERR(clk)) {
+		ret = PTR_ERR(clk);
 		goto err_out_free_mdiobus;
 	}
 
-	ret = clk_prepare_enable(data->clk);
-	if (ret)
-		goto err_out_free_mdiobus;
-
 	ret = of_mdiobus_register(bus, np);
 	if (ret)
-		goto err_out_disable_clk;
+		goto err_out_free_mdiobus;
 
 	platform_set_drvdata(pdev, bus);
 
 	return 0;
 
-err_out_disable_clk:
-	clk_disable_unprepare(data->clk);
 err_out_free_mdiobus:
 	mdiobus_free(bus);
 	return ret;
@@ -121,10 +115,8 @@ static int hisi_femac_mdio_probe(struct platform_device *pdev)
 static void hisi_femac_mdio_remove(struct platform_device *pdev)
 {
 	struct mii_bus *bus = platform_get_drvdata(pdev);
-	struct hisi_femac_mdio_data *data = bus->priv;
 
 	mdiobus_unregister(bus);
-	clk_disable_unprepare(data->clk);
 	mdiobus_free(bus);
 }
 
-- 
2.39.0

[net-next v2 5/9] net: dsa: rzn1_a5psw: Convert to devm_clk_get_enabled()

[Yangtao Li]

Convert devm_clk_get(), clk_prepare_enable() to a single
call to devm_clk_get_enabled(), as this is exactly
what this function does.

Signed-off-by: Yangtao Li <frank.li@vivo.com>
---
 drivers/net/dsa/rzn1_a5psw.c | 22 ++++------------------
 1 file changed, 4 insertions(+), 18 deletions(-)

diff --git a/drivers/net/dsa/rzn1_a5psw.c b/drivers/net/dsa/rzn1_a5psw.c
index 92e032972b34..9627c6550a93 100644
--- a/drivers/net/dsa/rzn1_a5psw.c
+++ b/drivers/net/dsa/rzn1_a5psw.c
@@ -1228,35 +1228,27 @@ static int a5psw_probe(struct platform_device *pdev)
 	if (ret)
 		return ret;
 
-	a5psw->hclk = devm_clk_get(dev, "hclk");
+	a5psw->hclk = devm_clk_get_enabled(dev, "hclk");
 	if (IS_ERR(a5psw->hclk)) {
 		dev_err(dev, "failed get hclk clock\n");
 		ret = PTR_ERR(a5psw->hclk);
 		goto free_pcs;
 	}
 
-	a5psw->clk = devm_clk_get(dev, "clk");
+	a5psw->clk = devm_clk_get_enabled(dev, "clk");
 	if (IS_ERR(a5psw->clk)) {
 		dev_err(dev, "failed get clk_switch clock\n");
 		ret = PTR_ERR(a5psw->clk);
 		goto free_pcs;
 	}
 
-	ret = clk_prepare_enable(a5psw->clk);
-	if (ret)
-		goto free_pcs;
-
-	ret = clk_prepare_enable(a5psw->hclk);
-	if (ret)
-		goto clk_disable;
-
 	mdio = of_get_child_by_name(dev->of_node, "mdio");
 	if (of_device_is_available(mdio)) {
 		ret = a5psw_probe_mdio(a5psw, mdio);
 		if (ret) {
 			of_node_put(mdio);
 			dev_err(dev, "Failed to register MDIO: %d\n", ret);
-			goto hclk_disable;
+			goto free_pcs;
 		}
 	}
 
@@ -1272,15 +1264,11 @@ static int a5psw_probe(struct platform_device *pdev)
 	ret = dsa_register_switch(ds);
 	if (ret) {
 		dev_err(dev, "Failed to register DSA switch: %d\n", ret);
-		goto hclk_disable;
+		goto free_pcs;
 	}
 
 	return 0;
 
-hclk_disable:
-	clk_disable_unprepare(a5psw->hclk);
-clk_disable:
-	clk_disable_unprepare(a5psw->clk);
 free_pcs:
 	a5psw_pcs_free(a5psw);
 
@@ -1296,8 +1284,6 @@ static void a5psw_remove(struct platform_device *pdev)
 
 	dsa_unregister_switch(&a5psw->ds);
 	a5psw_pcs_free(a5psw);
-	clk_disable_unprepare(a5psw->hclk);
-	clk_disable_unprepare(a5psw->clk);
 }
 
 static void a5psw_shutdown(struct platform_device *pdev)
-- 
2.39.0

[net-next v2 6/9] net: ethernet: broadcom: bcm63xx_enet: Convert to devm_clk_get_enabled()

[Yangtao Li]

Convert devm_clk_get(), clk_prepare_enable() to a single
call to devm_clk_get_enabled(), as this is exactly
what this function does.

Signed-off-by: Yangtao Li <frank.li@vivo.com>
---
 drivers/net/ethernet/broadcom/bcm63xx_enet.c | 47 ++++++--------------
 drivers/net/ethernet/broadcom/bcm63xx_enet.h |  6 ---
 2 files changed, 13 insertions(+), 40 deletions(-)

diff --git a/drivers/net/ethernet/broadcom/bcm63xx_enet.c b/drivers/net/ethernet/broadcom/bcm63xx_enet.c
index 3c0e3b9828be..6e288cee2c35 100644
--- a/drivers/net/ethernet/broadcom/bcm63xx_enet.c
+++ b/drivers/net/ethernet/broadcom/bcm63xx_enet.c
@@ -1718,6 +1718,7 @@ static int bcm_enet_probe(struct platform_device *pdev)
 	struct bcm63xx_enet_platform_data *pd;
 	int irq, irq_rx, irq_tx;
 	struct mii_bus *bus;
+	struct clk *phy_clk, *mac_clk;
 	int i, ret;
 
 	if (!bcm_enet_shared_base[0])
@@ -1752,14 +1753,11 @@ static int bcm_enet_probe(struct platform_device *pdev)
 	priv->irq_rx = irq_rx;
 	priv->irq_tx = irq_tx;
 
-	priv->mac_clk = devm_clk_get(&pdev->dev, "enet");
-	if (IS_ERR(priv->mac_clk)) {
-		ret = PTR_ERR(priv->mac_clk);
+	mac_clk = devm_clk_get_enabled(&pdev->dev, "enet");
+	if (IS_ERR(mac_clk)) {
+		ret = PTR_ERR(mac_clk);
 		goto out;
 	}
-	ret = clk_prepare_enable(priv->mac_clk);
-	if (ret)
-		goto out;
 
 	/* initialize default and fetch platform data */
 	priv->rx_ring_size = BCMENET_DEF_RX_DESC;
@@ -1789,15 +1787,11 @@ static int bcm_enet_probe(struct platform_device *pdev)
 
 	if (priv->has_phy && !priv->use_external_mii) {
 		/* using internal PHY, enable clock */
-		priv->phy_clk = devm_clk_get(&pdev->dev, "ephy");
-		if (IS_ERR(priv->phy_clk)) {
-			ret = PTR_ERR(priv->phy_clk);
-			priv->phy_clk = NULL;
-			goto out_disable_clk_mac;
+		phy_clk = devm_clk_get_enabled(&pdev->dev, "ephy");
+		if (IS_ERR(phy_clk)) {
+			ret = PTR_ERR(phy_clk);
+			goto out;
 		}
-		ret = clk_prepare_enable(priv->phy_clk);
-		if (ret)
-			goto out_disable_clk_mac;
 	}
 
 	/* do minimal hardware init to be able to probe mii bus */
@@ -1889,10 +1883,7 @@ static int bcm_enet_probe(struct platform_device *pdev)
 out_uninit_hw:
 	/* turn off mdc clock */
 	enet_writel(priv, 0, ENET_MIISC_REG);
-	clk_disable_unprepare(priv->phy_clk);
 
-out_disable_clk_mac:
-	clk_disable_unprepare(priv->mac_clk);
 out:
 	free_netdev(dev);
 	return ret;
@@ -1927,10 +1918,6 @@ static void bcm_enet_remove(struct platform_device *pdev)
 				       bcm_enet_mdio_write_mii);
 	}
 
-	/* disable hw block clocks */
-	clk_disable_unprepare(priv->phy_clk);
-	clk_disable_unprepare(priv->mac_clk);
-
 	free_netdev(dev);
 }
 
@@ -2648,6 +2635,7 @@ static int bcm_enetsw_probe(struct platform_device *pdev)
 	struct bcm63xx_enetsw_platform_data *pd;
 	struct resource *res_mem;
 	int ret, irq_rx, irq_tx;
+	struct clk *mac_clk;
 
 	if (!bcm_enet_shared_base[0])
 		return -EPROBE_DEFER;
@@ -2694,14 +2682,11 @@ static int bcm_enetsw_probe(struct platform_device *pdev)
 		goto out;
 	}
 
-	priv->mac_clk = devm_clk_get(&pdev->dev, "enetsw");
-	if (IS_ERR(priv->mac_clk)) {
-		ret = PTR_ERR(priv->mac_clk);
+	mac_clk = devm_clk_get_enabled(&pdev->dev, "enetsw");
+	if (IS_ERR(mac_clk)) {
+		ret = PTR_ERR(mac_clk);
 		goto out;
 	}
-	ret = clk_prepare_enable(priv->mac_clk);
-	if (ret)
-		goto out;
 
 	priv->rx_chan = 0;
 	priv->tx_chan = 1;
@@ -2720,7 +2705,7 @@ static int bcm_enetsw_probe(struct platform_device *pdev)
 
 	ret = register_netdev(dev);
 	if (ret)
-		goto out_disable_clk;
+		goto out;
 
 	netif_carrier_off(dev);
 	platform_set_drvdata(pdev, dev);
@@ -2729,8 +2714,6 @@ static int bcm_enetsw_probe(struct platform_device *pdev)
 
 	return 0;
 
-out_disable_clk:
-	clk_disable_unprepare(priv->mac_clk);
 out:
 	free_netdev(dev);
 	return ret;
@@ -2740,16 +2723,12 @@ static int bcm_enetsw_probe(struct platform_device *pdev)
 /* exit func, stops hardware and unregisters netdevice */
 static void bcm_enetsw_remove(struct platform_device *pdev)
 {
-	struct bcm_enet_priv *priv;
 	struct net_device *dev;
 
 	/* stop netdevice */
 	dev = platform_get_drvdata(pdev);
-	priv = netdev_priv(dev);
 	unregister_netdev(dev);
 
-	clk_disable_unprepare(priv->mac_clk);
-
 	free_netdev(dev);
 }
 
diff --git a/drivers/net/ethernet/broadcom/bcm63xx_enet.h b/drivers/net/ethernet/broadcom/bcm63xx_enet.h
index 78f1830fb3cb..e98838b8b92f 100644
--- a/drivers/net/ethernet/broadcom/bcm63xx_enet.h
+++ b/drivers/net/ethernet/broadcom/bcm63xx_enet.h
@@ -316,12 +316,6 @@ struct bcm_enet_priv {
 	/* lock mib update between userspace request and workqueue */
 	struct mutex mib_update_lock;
 
-	/* mac clock */
-	struct clk *mac_clk;
-
-	/* phy clock if internal phy is used */
-	struct clk *phy_clk;
-
 	/* network device reference */
 	struct net_device *net_dev;
 
-- 
2.39.0

[net-next v2 7/9] net: ethernet: marvell: mvneta: Convert to devm_clk_get_enabled()

[Yangtao Li]

Convert devm_clk_get(), clk_prepare_enable() to a single
call to devm_clk_get_enabled(), as this is exactly
what this function does.

Signed-off-by: Yangtao Li <frank.li@vivo.com>
Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
---
 drivers/net/ethernet/marvell/mvneta_bm.c | 16 +++++-----------
 drivers/net/ethernet/marvell/mvneta_bm.h |  1 -
 2 files changed, 5 insertions(+), 12 deletions(-)

diff --git a/drivers/net/ethernet/marvell/mvneta_bm.c b/drivers/net/ethernet/marvell/mvneta_bm.c
index 3f46a0fed048..bfd1ed12d98c 100644
--- a/drivers/net/ethernet/marvell/mvneta_bm.c
+++ b/drivers/net/ethernet/marvell/mvneta_bm.c
@@ -411,6 +411,7 @@ static int mvneta_bm_probe(struct platform_device *pdev)
 {
 	struct device_node *dn = pdev->dev.of_node;
 	struct mvneta_bm *priv;
+	struct clk *clk;
 	int err;
 
 	priv = devm_kzalloc(&pdev->dev, sizeof(struct mvneta_bm), GFP_KERNEL);
@@ -421,17 +422,14 @@ static int mvneta_bm_probe(struct platform_device *pdev)
 	if (IS_ERR(priv->reg_base))
 		return PTR_ERR(priv->reg_base);
 
-	priv->clk = devm_clk_get(&pdev->dev, NULL);
-	if (IS_ERR(priv->clk))
-		return PTR_ERR(priv->clk);
-	err = clk_prepare_enable(priv->clk);
-	if (err < 0)
-		return err;
+	clk = devm_clk_get_enabled(&pdev->dev, NULL);
+	if (IS_ERR(clk))
+		return PTR_ERR(clk);
 
 	err = mvneta_bm_get_sram(dn, priv);
 	if (err < 0) {
 		dev_err(&pdev->dev, "failed to allocate internal memory\n");
-		goto err_clk;
+		return err;
 	}
 
 	priv->pdev = pdev;
@@ -452,8 +450,6 @@ static int mvneta_bm_probe(struct platform_device *pdev)
 
 err_sram:
 	mvneta_bm_put_sram(priv);
-err_clk:
-	clk_disable_unprepare(priv->clk);
 	return err;
 }
 
@@ -473,8 +469,6 @@ static void mvneta_bm_remove(struct platform_device *pdev)
 
 	/* Dectivate BM unit */
 	mvneta_bm_write(priv, MVNETA_BM_COMMAND_REG, MVNETA_BM_STOP_MASK);
-
-	clk_disable_unprepare(priv->clk);
 }
 
 static const struct of_device_id mvneta_bm_match[] = {
diff --git a/drivers/net/ethernet/marvell/mvneta_bm.h b/drivers/net/ethernet/marvell/mvneta_bm.h
index e47783ce77e0..396dced914aa 100644
--- a/drivers/net/ethernet/marvell/mvneta_bm.h
+++ b/drivers/net/ethernet/marvell/mvneta_bm.h
@@ -94,7 +94,6 @@ enum mvneta_bm_type {
 
 struct mvneta_bm {
 	void __iomem *reg_base;
-	struct clk *clk;
 	struct platform_device *pdev;
 
 	struct gen_pool *bppi_pool;
-- 
2.39.0

[net-next v2 8/9] net: mvpp2: Convert to devm_clk_get_enabled() and devm_clk_get_optional_enabled()

[Yangtao Li]

Use devm_clk_get_enabled() and devm_clk_get_optional_enabled()
to simplify code.

Signed-off-by: Yangtao Li <frank.li@vivo.com>
Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Tested-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Suggested-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
---
v2:
-get rid of amount of variables used

 drivers/net/ethernet/marvell/mvpp2/mvpp2.h    |  7 --
 .../net/ethernet/marvell/mvpp2/mvpp2_main.c   | 89 +++++--------------
 2 files changed, 24 insertions(+), 72 deletions(-)

diff --git a/drivers/net/ethernet/marvell/mvpp2/mvpp2.h b/drivers/net/ethernet/marvell/mvpp2/mvpp2.h
index 9e02e4367bec..643a645e8097 100644
--- a/drivers/net/ethernet/marvell/mvpp2/mvpp2.h
+++ b/drivers/net/ethernet/marvell/mvpp2/mvpp2.h
@@ -1044,13 +1044,6 @@ struct mvpp2 {
 	 */
 	struct regmap *sysctrl_base;
 
-	/* Common clocks */
-	struct clk *pp_clk;
-	struct clk *gop_clk;
-	struct clk *mg_clk;
-	struct clk *mg_core_clk;
-	struct clk *axi_clk;
-
 	/* List of pointers to port structures */
 	int port_count;
 	struct mvpp2_port *port_list[MVPP2_MAX_PORTS];
diff --git a/drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c b/drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c
index 2fe8bae4eb3c..0ca2daeb0f90 100644
--- a/drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c
+++ b/drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c
@@ -7561,56 +7561,32 @@ static int mvpp2_probe(struct platform_device *pdev)
 		priv->max_port_rxqs = 32;
 
 	if (dev_of_node(&pdev->dev)) {
-		priv->pp_clk = devm_clk_get(&pdev->dev, "pp_clk");
-		if (IS_ERR(priv->pp_clk))
-			return PTR_ERR(priv->pp_clk);
-		err = clk_prepare_enable(priv->pp_clk);
-		if (err < 0)
-			return err;
-
-		priv->gop_clk = devm_clk_get(&pdev->dev, "gop_clk");
-		if (IS_ERR(priv->gop_clk)) {
-			err = PTR_ERR(priv->gop_clk);
-			goto err_pp_clk;
-		}
-		err = clk_prepare_enable(priv->gop_clk);
-		if (err < 0)
-			goto err_pp_clk;
+		struct clk *clk;
 
-		if (priv->hw_version >= MVPP22) {
-			priv->mg_clk = devm_clk_get(&pdev->dev, "mg_clk");
-			if (IS_ERR(priv->mg_clk)) {
-				err = PTR_ERR(priv->mg_clk);
-				goto err_gop_clk;
-			}
+		clk = devm_clk_get_enabled(&pdev->dev, "pp_clk");
+		if (IS_ERR(clk))
+			return PTR_ERR(clk);
 
-			err = clk_prepare_enable(priv->mg_clk);
-			if (err < 0)
-				goto err_gop_clk;
+		/* Get system's tclk rate */
+		priv->tclk = clk_get_rate(clk);
 
-			priv->mg_core_clk = devm_clk_get_optional(&pdev->dev, "mg_core_clk");
-			if (IS_ERR(priv->mg_core_clk)) {
-				err = PTR_ERR(priv->mg_core_clk);
-				goto err_mg_clk;
-			}
+		clk = devm_clk_get_enabled(&pdev->dev, "gop_clk");
+		if (IS_ERR(clk))
+			return PTR_ERR(clk);
 
-			err = clk_prepare_enable(priv->mg_core_clk);
-			if (err < 0)
-				goto err_mg_clk;
-		}
+		if (priv->hw_version >= MVPP22) {
+			clk = devm_clk_get_enabled(&pdev->dev, "mg_clk");
+			if (IS_ERR(clk))
+				return PTR_ERR(clk);
 
-		priv->axi_clk = devm_clk_get_optional(&pdev->dev, "axi_clk");
-		if (IS_ERR(priv->axi_clk)) {
-			err = PTR_ERR(priv->axi_clk);
-			goto err_mg_core_clk;
+			clk = devm_clk_get_optional_enabled(&pdev->dev, "mg_core_clk");
+			if (IS_ERR(clk))
+				return PTR_ERR(clk);
 		}
 
-		err = clk_prepare_enable(priv->axi_clk);
-		if (err < 0)
-			goto err_mg_core_clk;
-
-		/* Get system's tclk rate */
-		priv->tclk = clk_get_rate(priv->pp_clk);
+		clk = devm_clk_get_optional_enabled(&pdev->dev, "axi_clk");
+		if (IS_ERR(clk))
+			return PTR_ERR(clk);
 	} else {
 		err = device_property_read_u32(&pdev->dev, "clock-frequency", &priv->tclk);
 		if (err) {
@@ -7622,7 +7598,7 @@ static int mvpp2_probe(struct platform_device *pdev)
 	if (priv->hw_version >= MVPP22) {
 		err = dma_set_mask(&pdev->dev, MVPP2_DESC_DMA_MASK);
 		if (err)
-			goto err_axi_clk;
+			return err;
 		/* Sadly, the BM pools all share the same register to
 		 * store the high 32 bits of their address. So they
 		 * must all have the same high 32 bits, which forces
@@ -7630,7 +7606,7 @@ static int mvpp2_probe(struct platform_device *pdev)
 		 */
 		err = dma_set_coherent_mask(&pdev->dev, DMA_BIT_MASK(32));
 		if (err)
-			goto err_axi_clk;
+			return err;
 	}
 
 	/* Map DTS-active ports. Should be done before FIFO mvpp2_init */
@@ -7649,12 +7625,12 @@ static int mvpp2_probe(struct platform_device *pdev)
 	err = mvpp2_init(pdev, priv);
 	if (err < 0) {
 		dev_err(&pdev->dev, "failed to initialize controller\n");
-		goto err_axi_clk;
+		return err;
 	}
 
 	err = mvpp22_tai_probe(&pdev->dev, priv);
 	if (err < 0)
-		goto err_axi_clk;
+		return err;
 
 	/* Initialize ports */
 	device_for_each_child_node_scoped(&pdev->dev, port_fwnode) {
@@ -7665,8 +7641,7 @@ static int mvpp2_probe(struct platform_device *pdev)
 
 	if (priv->port_count == 0) {
 		dev_err(&pdev->dev, "no ports enabled\n");
-		err = -ENODEV;
-		goto err_axi_clk;
+		return -ENODEV;
 	}
 
 	/* Statistics must be gathered regularly because some of them (like
@@ -7698,16 +7673,6 @@ static int mvpp2_probe(struct platform_device *pdev)
 err_port_probe:
 	for (i = 0; i < priv->port_count; i++)
 		mvpp2_port_remove(priv->port_list[i]);
-err_axi_clk:
-	clk_disable_unprepare(priv->axi_clk);
-err_mg_core_clk:
-	clk_disable_unprepare(priv->mg_core_clk);
-err_mg_clk:
-	clk_disable_unprepare(priv->mg_clk);
-err_gop_clk:
-	clk_disable_unprepare(priv->gop_clk);
-err_pp_clk:
-	clk_disable_unprepare(priv->pp_clk);
 	return err;
 }
 
@@ -7745,12 +7710,6 @@ static void mvpp2_remove(struct platform_device *pdev)
 
 	if (!dev_of_node(&pdev->dev))
 		return;
-
-	clk_disable_unprepare(priv->axi_clk);
-	clk_disable_unprepare(priv->mg_core_clk);
-	clk_disable_unprepare(priv->mg_clk);
-	clk_disable_unprepare(priv->pp_clk);
-	clk_disable_unprepare(priv->gop_clk);
 }
 
 static const struct of_device_id mvpp2_match[] = {
-- 
2.39.0

[net-next v2 9/9] net: marvell: pxa168_eth: Convert to devm_clk_get_enabled()

[Yangtao Li]

Convert devm_clk_get(), clk_prepare_enable() to a single
call to devm_clk_get_enabled(), as this is exactly
what this function does.

Signed-off-by: Yangtao Li <frank.li@vivo.com>
---
 drivers/net/ethernet/marvell/pxa168_eth.c | 17 ++++-------------
 1 file changed, 4 insertions(+), 13 deletions(-)

diff --git a/drivers/net/ethernet/marvell/pxa168_eth.c b/drivers/net/ethernet/marvell/pxa168_eth.c
index 1a59c952aa01..bad91cc705e8 100644
--- a/drivers/net/ethernet/marvell/pxa168_eth.c
+++ b/drivers/net/ethernet/marvell/pxa168_eth.c
@@ -237,8 +237,6 @@ struct pxa168_eth_private {
 	struct timer_list timeout;
 	struct mii_bus *smi_bus;
 
-	/* clock */
-	struct clk *clk;
 	struct pxa168_eth_platform_data *pd;
 	/*
 	 * Ethernet controller base address.
@@ -1394,23 +1392,19 @@ static int pxa168_eth_probe(struct platform_device *pdev)
 
 	printk(KERN_NOTICE "PXA168 10/100 Ethernet Driver\n");
 
-	clk = devm_clk_get(&pdev->dev, NULL);
+	clk = devm_clk_get_enabled(&pdev->dev, NULL);
 	if (IS_ERR(clk)) {
 		dev_err(&pdev->dev, "Fast Ethernet failed to get clock\n");
-		return -ENODEV;
+		return PTR_ERR(clk);
 	}
-	clk_prepare_enable(clk);
 
 	dev = alloc_etherdev(sizeof(struct pxa168_eth_private));
-	if (!dev) {
-		err = -ENOMEM;
-		goto err_clk;
-	}
+	if (!dev)
+		return -ENOMEM;
 
 	platform_set_drvdata(pdev, dev);
 	pep = netdev_priv(dev);
 	pep->dev = dev;
-	pep->clk = clk;
 
 	pep->base = devm_platform_ioremap_resource(pdev, 0);
 	if (IS_ERR(pep->base)) {
@@ -1523,8 +1517,6 @@ static int pxa168_eth_probe(struct platform_device *pdev)
 	mdiobus_free(pep->smi_bus);
 err_netdev:
 	free_netdev(dev);
-err_clk:
-	clk_disable_unprepare(clk);
 	return err;
 }
 
@@ -1542,7 +1534,6 @@ static void pxa168_eth_remove(struct platform_device *pdev)
 	if (dev->phydev)
 		phy_disconnect(dev->phydev);
 
-	clk_disable_unprepare(pep->clk);
 	mdiobus_unregister(pep->smi_bus);
 	mdiobus_free(pep->smi_bus);
 	unregister_netdev(dev);
-- 
2.39.0

Re: [net-next v2 2/9] net: stmmac: platform: Convert to devm_clk_get_enabled() and devm_clk_get_optional_enabled()

[Serge Semin]

Hi Yangtao

On Fri, Aug 23, 2024 at 01:21:14AM -0600, Yangtao Li wrote:
> Use devm_clk_get_enabled() and devm_clk_get_optional_enabled()
> to simplify code.
> 
> Signed-off-by: Yangtao Li <frank.li@vivo.com>
> Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
> ---
> v2:
> -remove unused 'ret'
> -fix incompatible-pointer-types
> 
>  .../ethernet/stmicro/stmmac/stmmac_platform.c | 35 +++++--------------
>  1 file changed, 8 insertions(+), 27 deletions(-)
> 
> diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c
> index ad868e8d195d..1a66baaa4081 100644
> --- a/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c
> +++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c
> @@ -415,8 +415,6 @@ static int stmmac_of_get_mac_mode(struct device_node *np)
>  static void stmmac_remove_config_dt(struct platform_device *pdev,
>  				    struct plat_stmmacenet_data *plat)
>  {
> -	clk_disable_unprepare(plat->stmmac_clk);
> -	clk_disable_unprepare(plat->pclk);
>  	of_node_put(plat->phy_node);
>  	of_node_put(plat->mdio_node);
>  }
> @@ -436,7 +434,6 @@ stmmac_probe_config_dt(struct platform_device *pdev, u8 *mac)
>  	struct plat_stmmacenet_data *plat;
>  	struct stmmac_dma_cfg *dma_cfg;
>  	int phy_mode;
> -	void *ret;
>  	int rc;
>  
>  	plat = devm_kzalloc(&pdev->dev, sizeof(*plat), GFP_KERNEL);
> @@ -615,21 +612,16 @@ stmmac_probe_config_dt(struct platform_device *pdev, u8 *mac)
>  
>  	/* clock setup */
>  	if (!of_device_is_compatible(np, "snps,dwc-qos-ethernet-4.10")) {
> -		plat->stmmac_clk = devm_clk_get(&pdev->dev,
> -						STMMAC_RESOURCE_NAME);
> +		plat->stmmac_clk = devm_clk_get_enabled(&pdev->dev, STMMAC_RESOURCE_NAME);
>  		if (IS_ERR(plat->stmmac_clk)) {
>  			dev_warn(&pdev->dev, "Cannot get CSR clock\n");
>  			plat->stmmac_clk = NULL;
>  		}
> -		clk_prepare_enable(plat->stmmac_clk);
>  	}
>  
> -	plat->pclk = devm_clk_get_optional(&pdev->dev, "pclk");
> -	if (IS_ERR(plat->pclk)) {
> -		ret = plat->pclk;
> -		goto error_pclk_get;
> -	}
> -	clk_prepare_enable(plat->pclk);
> +	plat->pclk = devm_clk_get_optional_enabled(&pdev->dev, "pclk");
> +	if (IS_ERR(plat->pclk))

> +		return (void *)plat->pclk;

Use the ERR_CAST() macro instead of the open coded void type cast.

>  
>  	/* Fall-back to main clock in case of no PTP ref is passed */
>  	plat->clk_ptp_ref = devm_clk_get(&pdev->dev, "ptp_ref");
> @@ -644,26 +636,15 @@ stmmac_probe_config_dt(struct platform_device *pdev, u8 *mac)
>  
>  	plat->stmmac_rst = devm_reset_control_get_optional(&pdev->dev,
>  							   STMMAC_RESOURCE_NAME);
> -	if (IS_ERR(plat->stmmac_rst)) {
> -		ret = plat->stmmac_rst;
> -		goto error_hw_init;
> -	}
> +	if (IS_ERR(plat->stmmac_rst))

> +		return (void *)plat->stmmac_rst;

ditto

>  
>  	plat->stmmac_ahb_rst = devm_reset_control_get_optional_shared(
>  							&pdev->dev, "ahb");
> -	if (IS_ERR(plat->stmmac_ahb_rst)) {
> -		ret = plat->stmmac_ahb_rst;
> -		goto error_hw_init;
> -	}
> +	if (IS_ERR(plat->stmmac_ahb_rst))

> +		return (void *)plat->stmmac_ahb_rst;

ditto

-Serge(y)

>  
>  	return plat;
> -
> -error_hw_init:
> -	clk_disable_unprepare(plat->pclk);
> -error_pclk_get:
> -	clk_disable_unprepare(plat->stmmac_clk);
> -
> -	return ret;
>  }
>  
>  static void devm_stmmac_remove_config_dt(void *data)
> -- 
> 2.39.0
> 
> 

RE: [net-next v2 2/9] net: stmmac: platform: Convert to devm_clk_get_enabled() and devm_clk_get_optional_enabled()

[Biju Das]

Hi Serge Semin,

> -----Original Message-----
> From: Serge Semin <fancer.lancer@gmail.com>
> Sent: Friday, August 23, 2024 10:11 AM
> Subject: Re: [net-next v2 2/9] net: stmmac: platform: Convert to devm_clk_get_enabled() and
> devm_clk_get_optional_enabled()
> 
> Hi Yangtao
> 
> On Fri, Aug 23, 2024 at 01:21:14AM -0600, Yangtao Li wrote:
> > Use devm_clk_get_enabled() and devm_clk_get_optional_enabled() to
> > simplify code.
> >
> > Signed-off-by: Yangtao Li <frank.li@vivo.com>
> > Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
> > ---
> > v2:
> > -remove unused 'ret'
> > -fix incompatible-pointer-types
> >
> >  .../ethernet/stmicro/stmmac/stmmac_platform.c | 35
> > +++++--------------
> >  1 file changed, 8 insertions(+), 27 deletions(-)
> >
> > diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c
> > b/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c
> > index ad868e8d195d..1a66baaa4081 100644
> > --- a/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c
> > +++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c
> > @@ -415,8 +415,6 @@ static int stmmac_of_get_mac_mode(struct
> > device_node *np)  static void stmmac_remove_config_dt(struct platform_device *pdev,
> >  				    struct plat_stmmacenet_data *plat)  {
> > -	clk_disable_unprepare(plat->stmmac_clk);
> > -	clk_disable_unprepare(plat->pclk);
> >  	of_node_put(plat->phy_node);
> >  	of_node_put(plat->mdio_node);
> >  }
> > @@ -436,7 +434,6 @@ stmmac_probe_config_dt(struct platform_device *pdev, u8 *mac)
> >  	struct plat_stmmacenet_data *plat;
> >  	struct stmmac_dma_cfg *dma_cfg;
> >  	int phy_mode;
> > -	void *ret;
> >  	int rc;
> >
> >  	plat = devm_kzalloc(&pdev->dev, sizeof(*plat), GFP_KERNEL); @@
> > -615,21 +612,16 @@ stmmac_probe_config_dt(struct platform_device
> > *pdev, u8 *mac)
> >
> >  	/* clock setup */
> >  	if (!of_device_is_compatible(np, "snps,dwc-qos-ethernet-4.10")) {
> > -		plat->stmmac_clk = devm_clk_get(&pdev->dev,
> > -						STMMAC_RESOURCE_NAME);
> > +		plat->stmmac_clk = devm_clk_get_enabled(&pdev->dev,
> > +STMMAC_RESOURCE_NAME);
> >  		if (IS_ERR(plat->stmmac_clk)) {
> >  			dev_warn(&pdev->dev, "Cannot get CSR clock\n");
> >  			plat->stmmac_clk = NULL;
> >  		}
> > -		clk_prepare_enable(plat->stmmac_clk);
> >  	}
> >
> > -	plat->pclk = devm_clk_get_optional(&pdev->dev, "pclk");
> > -	if (IS_ERR(plat->pclk)) {
> > -		ret = plat->pclk;
> > -		goto error_pclk_get;
> > -	}
> > -	clk_prepare_enable(plat->pclk);
> > +	plat->pclk = devm_clk_get_optional_enabled(&pdev->dev, "pclk");
> > +	if (IS_ERR(plat->pclk))
> 
> > +		return (void *)plat->pclk;
> 
> Use the ERR_CAST() macro instead of the open coded void type cast.

Which is better ERR_PTR or ERR_CAST in this case?

Cheers,
Biju

> 
> >
> >  	/* Fall-back to main clock in case of no PTP ref is passed */
> >  	plat->clk_ptp_ref = devm_clk_get(&pdev->dev, "ptp_ref"); @@ -644,26
> > +636,15 @@ stmmac_probe_config_dt(struct platform_device *pdev, u8
> > *mac)
> >
> >  	plat->stmmac_rst = devm_reset_control_get_optional(&pdev->dev,
> >  							   STMMAC_RESOURCE_NAME);
> > -	if (IS_ERR(plat->stmmac_rst)) {
> > -		ret = plat->stmmac_rst;
> > -		goto error_hw_init;
> > -	}
> > +	if (IS_ERR(plat->stmmac_rst))
> 
> > +		return (void *)plat->stmmac_rst;
> 
> ditto
> 
> >
> >  	plat->stmmac_ahb_rst = devm_reset_control_get_optional_shared(
> >  							&pdev->dev, "ahb");
> > -	if (IS_ERR(plat->stmmac_ahb_rst)) {
> > -		ret = plat->stmmac_ahb_rst;
> > -		goto error_hw_init;
> > -	}
> > +	if (IS_ERR(plat->stmmac_ahb_rst))
> 
> > +		return (void *)plat->stmmac_ahb_rst;
> 
> ditto
> 
> -Serge(y)
> 
> >
> >  	return plat;
> > -
> > -error_hw_init:
> > -	clk_disable_unprepare(plat->pclk);
> > -error_pclk_get:
> > -	clk_disable_unprepare(plat->stmmac_clk);
> > -
> > -	return ret;
> >  }
> >
> >  static void devm_stmmac_remove_config_dt(void *data)
> > --
> > 2.39.0
> >
> >

Re: [net-next v2 2/9] net: stmmac: platform: Convert to devm_clk_get_enabled() and devm_clk_get_optional_enabled()

[Serge Semin]

Hi Biju

On Fri, Aug 23, 2024 at 09:15:06AM +0000, Biju Das wrote:
> Hi Serge Semin,
> 
> > -----Original Message-----
> > From: Serge Semin <fancer.lancer@gmail.com>
> > Sent: Friday, August 23, 2024 10:11 AM
> > Subject: Re: [net-next v2 2/9] net: stmmac: platform: Convert to devm_clk_get_enabled() and
> > devm_clk_get_optional_enabled()
> > 
> > Hi Yangtao
> > 
> > On Fri, Aug 23, 2024 at 01:21:14AM -0600, Yangtao Li wrote:
> > > Use devm_clk_get_enabled() and devm_clk_get_optional_enabled() to
> > > simplify code.
> > >
> > > Signed-off-by: Yangtao Li <frank.li@vivo.com>
> > > Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
> > > ---
> > > v2:
> > > -remove unused 'ret'
> > > -fix incompatible-pointer-types
> > >
> > >  .../ethernet/stmicro/stmmac/stmmac_platform.c | 35
> > > +++++--------------
> > >  1 file changed, 8 insertions(+), 27 deletions(-)
> > >
> > > diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c
> > > b/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c
> > > index ad868e8d195d..1a66baaa4081 100644
> > > --- a/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c
> > > +++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c
> > > @@ -415,8 +415,6 @@ static int stmmac_of_get_mac_mode(struct
> > > device_node *np)  static void stmmac_remove_config_dt(struct platform_device *pdev,
> > >  				    struct plat_stmmacenet_data *plat)  {
> > > -	clk_disable_unprepare(plat->stmmac_clk);
> > > -	clk_disable_unprepare(plat->pclk);
> > >  	of_node_put(plat->phy_node);
> > >  	of_node_put(plat->mdio_node);
> > >  }
> > > @@ -436,7 +434,6 @@ stmmac_probe_config_dt(struct platform_device *pdev, u8 *mac)
> > >  	struct plat_stmmacenet_data *plat;
> > >  	struct stmmac_dma_cfg *dma_cfg;
> > >  	int phy_mode;
> > > -	void *ret;
> > >  	int rc;
> > >
> > >  	plat = devm_kzalloc(&pdev->dev, sizeof(*plat), GFP_KERNEL); @@
> > > -615,21 +612,16 @@ stmmac_probe_config_dt(struct platform_device
> > > *pdev, u8 *mac)
> > >
> > >  	/* clock setup */
> > >  	if (!of_device_is_compatible(np, "snps,dwc-qos-ethernet-4.10")) {
> > > -		plat->stmmac_clk = devm_clk_get(&pdev->dev,
> > > -						STMMAC_RESOURCE_NAME);
> > > +		plat->stmmac_clk = devm_clk_get_enabled(&pdev->dev,
> > > +STMMAC_RESOURCE_NAME);
> > >  		if (IS_ERR(plat->stmmac_clk)) {
> > >  			dev_warn(&pdev->dev, "Cannot get CSR clock\n");
> > >  			plat->stmmac_clk = NULL;
> > >  		}
> > > -		clk_prepare_enable(plat->stmmac_clk);
> > >  	}
> > >
> > > -	plat->pclk = devm_clk_get_optional(&pdev->dev, "pclk");
> > > -	if (IS_ERR(plat->pclk)) {
> > > -		ret = plat->pclk;
> > > -		goto error_pclk_get;
> > > -	}
> > > -	clk_prepare_enable(plat->pclk);
> > > +	plat->pclk = devm_clk_get_optional_enabled(&pdev->dev, "pclk");
> > > +	if (IS_ERR(plat->pclk))
> > 
> > > +		return (void *)plat->pclk;
> > 
> > Use the ERR_CAST() macro instead of the open coded void type cast.
> 

> Which is better ERR_PTR or ERR_CAST in this case?

The only correct macro in this case is ERR_CAST() which implies one
error-pointer cast to another. Open-coding the pointers cast is
discouraged.

The ERR_PTR() macro is utilized to cast an _integer-error_ to an
error-pointer.

-Serge(y)

> 
> Cheers,
> Biju
> 
> > 
> > >
> > >  	/* Fall-back to main clock in case of no PTP ref is passed */
> > >  	plat->clk_ptp_ref = devm_clk_get(&pdev->dev, "ptp_ref"); @@ -644,26
> > > +636,15 @@ stmmac_probe_config_dt(struct platform_device *pdev, u8
> > > *mac)
> > >
> > >  	plat->stmmac_rst = devm_reset_control_get_optional(&pdev->dev,
> > >  							   STMMAC_RESOURCE_NAME);
> > > -	if (IS_ERR(plat->stmmac_rst)) {
> > > -		ret = plat->stmmac_rst;
> > > -		goto error_hw_init;
> > > -	}
> > > +	if (IS_ERR(plat->stmmac_rst))
> > 
> > > +		return (void *)plat->stmmac_rst;
> > 
> > ditto
> > 
> > >
> > >  	plat->stmmac_ahb_rst = devm_reset_control_get_optional_shared(
> > >  							&pdev->dev, "ahb");
> > > -	if (IS_ERR(plat->stmmac_ahb_rst)) {
> > > -		ret = plat->stmmac_ahb_rst;
> > > -		goto error_hw_init;
> > > -	}
> > > +	if (IS_ERR(plat->stmmac_ahb_rst))
> > 
> > > +		return (void *)plat->stmmac_ahb_rst;
> > 
> > ditto
> > 
> > -Serge(y)
> > 
> > >
> > >  	return plat;
> > > -
> > > -error_hw_init:
> > > -	clk_disable_unprepare(plat->pclk);
> > > -error_pclk_get:
> > > -	clk_disable_unprepare(plat->stmmac_clk);
> > > -
> > > -	return ret;
> > >  }
> > >
> > >  static void devm_stmmac_remove_config_dt(void *data)
> > > --
> > > 2.39.0
> > >
> > >
> 

RE: [net-next v2 2/9] net: stmmac: platform: Convert to devm_clk_get_enabled() and devm_clk_get_optional_enabled()

[Biju Das]

> -----Original Message-----
> From: Serge Semin <fancer.lancer@gmail.com>
> Sent: Friday, August 23, 2024 10:37 AM
> To: Biju Das <biju.das.jz@bp.renesas.com>
> Cc: Yangtao Li <frank.li@vivo.com>; clement.leger@bootlin.com; andrew@lunn.ch; f.fainelli@gmail.com;
> olteanv@gmail.com; davem@davemloft.net; edumazet@google.com; kuba@kernel.org; pabeni@redhat.com;
> ulli.kroll@googlemail.com; linus.walleij@linaro.org; marcin.s.wojtas@gmail.com; linux@armlinux.org.uk;
> alexandre.torgue@foss.st.com; joabreu@synopsys.com; mcoquelin.stm32@gmail.com; hkallweit1@gmail.com;
> kees@kernel.org; justinstitt@google.com; u.kleine-koenig@pengutronix.de; horms@kernel.org;
> sd@queasysnail.net; linux-renesas-soc@vger.kernel.org; netdev@vger.kernel.org; linux-
> kernel@vger.kernel.org; linux-arm-kernel@lists.infradead.org; linux-stm32@st-md-
> mailman.stormreply.com; Maxime Chevallier <maxime.chevallier@bootlin.com>
> Subject: Re: [net-next v2 2/9] net: stmmac: platform: Convert to devm_clk_get_enabled() and
> devm_clk_get_optional_enabled()
> 
> Hi Biju
> 
> On Fri, Aug 23, 2024 at 09:15:06AM +0000, Biju Das wrote:
> > Hi Serge Semin,
> >
> > > -----Original Message-----
> > > From: Serge Semin <fancer.lancer@gmail.com>
> > > Sent: Friday, August 23, 2024 10:11 AM
> > > Subject: Re: [net-next v2 2/9] net: stmmac: platform: Convert to
> > > devm_clk_get_enabled() and
> > > devm_clk_get_optional_enabled()
> > >
> > > Hi Yangtao
> > >
> > > On Fri, Aug 23, 2024 at 01:21:14AM -0600, Yangtao Li wrote:
> > > > Use devm_clk_get_enabled() and devm_clk_get_optional_enabled() to
> > > > simplify code.
> > > >
> > > > Signed-off-by: Yangtao Li <frank.li@vivo.com>
> > > > Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
> > > > ---
> > > > v2:
> > > > -remove unused 'ret'
> > > > -fix incompatible-pointer-types
> > > >
> > > >  .../ethernet/stmicro/stmmac/stmmac_platform.c | 35
> > > > +++++--------------
> > > >  1 file changed, 8 insertions(+), 27 deletions(-)
> > > >
> > > > diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c
> > > > b/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c
> > > > index ad868e8d195d..1a66baaa4081 100644
> > > > --- a/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c
> > > > +++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c
> > > > @@ -415,8 +415,6 @@ static int stmmac_of_get_mac_mode(struct
> > > > device_node *np)  static void stmmac_remove_config_dt(struct platform_device *pdev,
> > > >  				    struct plat_stmmacenet_data *plat)  {
> > > > -	clk_disable_unprepare(plat->stmmac_clk);
> > > > -	clk_disable_unprepare(plat->pclk);
> > > >  	of_node_put(plat->phy_node);
> > > >  	of_node_put(plat->mdio_node);
> > > >  }
> > > > @@ -436,7 +434,6 @@ stmmac_probe_config_dt(struct platform_device *pdev, u8 *mac)
> > > >  	struct plat_stmmacenet_data *plat;
> > > >  	struct stmmac_dma_cfg *dma_cfg;
> > > >  	int phy_mode;
> > > > -	void *ret;
> > > >  	int rc;
> > > >
> > > >  	plat = devm_kzalloc(&pdev->dev, sizeof(*plat), GFP_KERNEL); @@
> > > > -615,21 +612,16 @@ stmmac_probe_config_dt(struct platform_device
> > > > *pdev, u8 *mac)
> > > >
> > > >  	/* clock setup */
> > > >  	if (!of_device_is_compatible(np, "snps,dwc-qos-ethernet-4.10")) {
> > > > -		plat->stmmac_clk = devm_clk_get(&pdev->dev,
> > > > -						STMMAC_RESOURCE_NAME);
> > > > +		plat->stmmac_clk = devm_clk_get_enabled(&pdev->dev,
> > > > +STMMAC_RESOURCE_NAME);
> > > >  		if (IS_ERR(plat->stmmac_clk)) {
> > > >  			dev_warn(&pdev->dev, "Cannot get CSR clock\n");
> > > >  			plat->stmmac_clk = NULL;
> > > >  		}
> > > > -		clk_prepare_enable(plat->stmmac_clk);
> > > >  	}
> > > >
> > > > -	plat->pclk = devm_clk_get_optional(&pdev->dev, "pclk");
> > > > -	if (IS_ERR(plat->pclk)) {
> > > > -		ret = plat->pclk;
> > > > -		goto error_pclk_get;
> > > > -	}
> > > > -	clk_prepare_enable(plat->pclk);
> > > > +	plat->pclk = devm_clk_get_optional_enabled(&pdev->dev, "pclk");
> > > > +	if (IS_ERR(plat->pclk))
> > >
> > > > +		return (void *)plat->pclk;
> > >
> > > Use the ERR_CAST() macro instead of the open coded void type cast.
> >
> 
> > Which is better ERR_PTR or ERR_CAST in this case?
> 
> The only correct macro in this case is ERR_CAST() which implies one error-pointer cast to another.
> Open-coding the pointers cast is discouraged.
> 
> The ERR_PTR() macro is utilized to cast an _integer-error_ to an error-pointer.

Thanks for the clarification. Make sense.

Cheers,
Biju

Re: [net-next v2 8/9] net: mvpp2: Convert to devm_clk_get_enabled() and devm_clk_get_optional_enabled()

[Marcin Wojtas]

pt., 23 sie 2024 o 09:07 Yangtao Li <frank.li@vivo.com> napisał(a):
>
> Use devm_clk_get_enabled() and devm_clk_get_optional_enabled()
> to simplify code.
>
> Signed-off-by: Yangtao Li <frank.li@vivo.com>
> Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
> Tested-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
> Suggested-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
> ---


Reviewed-by: Marcin Wojtas <marcin.s.wojtas@gmail.com>

Thanks!
Marcin

> v2:
> -get rid of amount of variables used
>
>  drivers/net/ethernet/marvell/mvpp2/mvpp2.h    |  7 --
>  .../net/ethernet/marvell/mvpp2/mvpp2_main.c   | 89 +++++--------------
>  2 files changed, 24 insertions(+), 72 deletions(-)
>
> diff --git a/drivers/net/ethernet/marvell/mvpp2/mvpp2.h b/drivers/net/ethernet/marvell/mvpp2/mvpp2.h
> index 9e02e4367bec..643a645e8097 100644
> --- a/drivers/net/ethernet/marvell/mvpp2/mvpp2.h
> +++ b/drivers/net/ethernet/marvell/mvpp2/mvpp2.h
> @@ -1044,13 +1044,6 @@ struct mvpp2 {
>          */
>         struct regmap *sysctrl_base;
>
> -       /* Common clocks */
> -       struct clk *pp_clk;
> -       struct clk *gop_clk;
> -       struct clk *mg_clk;
> -       struct clk *mg_core_clk;
> -       struct clk *axi_clk;
> -
>         /* List of pointers to port structures */
>         int port_count;
>         struct mvpp2_port *port_list[MVPP2_MAX_PORTS];
> diff --git a/drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c b/drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c
> index 2fe8bae4eb3c..0ca2daeb0f90 100644
> --- a/drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c
> +++ b/drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c
> @@ -7561,56 +7561,32 @@ static int mvpp2_probe(struct platform_device *pdev)
>                 priv->max_port_rxqs = 32;
>
>         if (dev_of_node(&pdev->dev)) {
> -               priv->pp_clk = devm_clk_get(&pdev->dev, "pp_clk");
> -               if (IS_ERR(priv->pp_clk))
> -                       return PTR_ERR(priv->pp_clk);
> -               err = clk_prepare_enable(priv->pp_clk);
> -               if (err < 0)
> -                       return err;
> -
> -               priv->gop_clk = devm_clk_get(&pdev->dev, "gop_clk");
> -               if (IS_ERR(priv->gop_clk)) {
> -                       err = PTR_ERR(priv->gop_clk);
> -                       goto err_pp_clk;
> -               }
> -               err = clk_prepare_enable(priv->gop_clk);
> -               if (err < 0)
> -                       goto err_pp_clk;
> +               struct clk *clk;
>
> -               if (priv->hw_version >= MVPP22) {
> -                       priv->mg_clk = devm_clk_get(&pdev->dev, "mg_clk");
> -                       if (IS_ERR(priv->mg_clk)) {
> -                               err = PTR_ERR(priv->mg_clk);
> -                               goto err_gop_clk;
> -                       }
> +               clk = devm_clk_get_enabled(&pdev->dev, "pp_clk");
> +               if (IS_ERR(clk))
> +                       return PTR_ERR(clk);
>
> -                       err = clk_prepare_enable(priv->mg_clk);
> -                       if (err < 0)
> -                               goto err_gop_clk;
> +               /* Get system's tclk rate */
> +               priv->tclk = clk_get_rate(clk);
>
> -                       priv->mg_core_clk = devm_clk_get_optional(&pdev->dev, "mg_core_clk");
> -                       if (IS_ERR(priv->mg_core_clk)) {
> -                               err = PTR_ERR(priv->mg_core_clk);
> -                               goto err_mg_clk;
> -                       }
> +               clk = devm_clk_get_enabled(&pdev->dev, "gop_clk");
> +               if (IS_ERR(clk))
> +                       return PTR_ERR(clk);
>
> -                       err = clk_prepare_enable(priv->mg_core_clk);
> -                       if (err < 0)
> -                               goto err_mg_clk;
> -               }
> +               if (priv->hw_version >= MVPP22) {
> +                       clk = devm_clk_get_enabled(&pdev->dev, "mg_clk");
> +                       if (IS_ERR(clk))
> +                               return PTR_ERR(clk);
>
> -               priv->axi_clk = devm_clk_get_optional(&pdev->dev, "axi_clk");
> -               if (IS_ERR(priv->axi_clk)) {
> -                       err = PTR_ERR(priv->axi_clk);
> -                       goto err_mg_core_clk;
> +                       clk = devm_clk_get_optional_enabled(&pdev->dev, "mg_core_clk");
> +                       if (IS_ERR(clk))
> +                               return PTR_ERR(clk);
>                 }
>
> -               err = clk_prepare_enable(priv->axi_clk);
> -               if (err < 0)
> -                       goto err_mg_core_clk;
> -
> -               /* Get system's tclk rate */
> -               priv->tclk = clk_get_rate(priv->pp_clk);
> +               clk = devm_clk_get_optional_enabled(&pdev->dev, "axi_clk");
> +               if (IS_ERR(clk))
> +                       return PTR_ERR(clk);
>         } else {
>                 err = device_property_read_u32(&pdev->dev, "clock-frequency", &priv->tclk);
>                 if (err) {
> @@ -7622,7 +7598,7 @@ static int mvpp2_probe(struct platform_device *pdev)
>         if (priv->hw_version >= MVPP22) {
>                 err = dma_set_mask(&pdev->dev, MVPP2_DESC_DMA_MASK);
>                 if (err)
> -                       goto err_axi_clk;
> +                       return err;
>                 /* Sadly, the BM pools all share the same register to
>                  * store the high 32 bits of their address. So they
>                  * must all have the same high 32 bits, which forces
> @@ -7630,7 +7606,7 @@ static int mvpp2_probe(struct platform_device *pdev)
>                  */
>                 err = dma_set_coherent_mask(&pdev->dev, DMA_BIT_MASK(32));
>                 if (err)
> -                       goto err_axi_clk;
> +                       return err;
>         }
>
>         /* Map DTS-active ports. Should be done before FIFO mvpp2_init */
> @@ -7649,12 +7625,12 @@ static int mvpp2_probe(struct platform_device *pdev)
>         err = mvpp2_init(pdev, priv);
>         if (err < 0) {
>                 dev_err(&pdev->dev, "failed to initialize controller\n");
> -               goto err_axi_clk;
> +               return err;
>         }
>
>         err = mvpp22_tai_probe(&pdev->dev, priv);
>         if (err < 0)
> -               goto err_axi_clk;
> +               return err;
>
>         /* Initialize ports */
>         device_for_each_child_node_scoped(&pdev->dev, port_fwnode) {
> @@ -7665,8 +7641,7 @@ static int mvpp2_probe(struct platform_device *pdev)
>
>         if (priv->port_count == 0) {
>                 dev_err(&pdev->dev, "no ports enabled\n");
> -               err = -ENODEV;
> -               goto err_axi_clk;
> +               return -ENODEV;
>         }
>
>         /* Statistics must be gathered regularly because some of them (like
> @@ -7698,16 +7673,6 @@ static int mvpp2_probe(struct platform_device *pdev)
>  err_port_probe:
>         for (i = 0; i < priv->port_count; i++)
>                 mvpp2_port_remove(priv->port_list[i]);
> -err_axi_clk:
> -       clk_disable_unprepare(priv->axi_clk);
> -err_mg_core_clk:
> -       clk_disable_unprepare(priv->mg_core_clk);
> -err_mg_clk:
> -       clk_disable_unprepare(priv->mg_clk);
> -err_gop_clk:
> -       clk_disable_unprepare(priv->gop_clk);
> -err_pp_clk:
> -       clk_disable_unprepare(priv->pp_clk);
>         return err;
>  }
>
> @@ -7745,12 +7710,6 @@ static void mvpp2_remove(struct platform_device *pdev)
>
>         if (!dev_of_node(&pdev->dev))
>                 return;
> -
> -       clk_disable_unprepare(priv->axi_clk);
> -       clk_disable_unprepare(priv->mg_core_clk);
> -       clk_disable_unprepare(priv->mg_clk);
> -       clk_disable_unprepare(priv->pp_clk);
> -       clk_disable_unprepare(priv->gop_clk);
>  }
>
>  static const struct of_device_id mvpp2_match[] = {
> --
> 2.39.0
>

Re: [net-next v2 7/9] net: ethernet: marvell: mvneta: Convert to devm_clk_get_enabled()

[Marcin Wojtas]

pt., 23 sie 2024 o 09:07 Yangtao Li <frank.li@vivo.com> napisał(a):
>
> Convert devm_clk_get(), clk_prepare_enable() to a single
> call to devm_clk_get_enabled(), as this is exactly
> what this function does.
>
> Signed-off-by: Yangtao Li <frank.li@vivo.com>
> Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
> ---

Reviewed-by: Marcin Wojtas <marcin.s.wojtas@gmail.com>

Thanks!
Marcin


>  drivers/net/ethernet/marvell/mvneta_bm.c | 16 +++++-----------
>  drivers/net/ethernet/marvell/mvneta_bm.h |  1 -
>  2 files changed, 5 insertions(+), 12 deletions(-)
>
> diff --git a/drivers/net/ethernet/marvell/mvneta_bm.c b/drivers/net/ethernet/marvell/mvneta_bm.c
> index 3f46a0fed048..bfd1ed12d98c 100644
> --- a/drivers/net/ethernet/marvell/mvneta_bm.c
> +++ b/drivers/net/ethernet/marvell/mvneta_bm.c
> @@ -411,6 +411,7 @@ static int mvneta_bm_probe(struct platform_device *pdev)
>  {
>         struct device_node *dn = pdev->dev.of_node;
>         struct mvneta_bm *priv;
> +       struct clk *clk;
>         int err;
>
>         priv = devm_kzalloc(&pdev->dev, sizeof(struct mvneta_bm), GFP_KERNEL);
> @@ -421,17 +422,14 @@ static int mvneta_bm_probe(struct platform_device *pdev)
>         if (IS_ERR(priv->reg_base))
>                 return PTR_ERR(priv->reg_base);
>
> -       priv->clk = devm_clk_get(&pdev->dev, NULL);
> -       if (IS_ERR(priv->clk))
> -               return PTR_ERR(priv->clk);
> -       err = clk_prepare_enable(priv->clk);
> -       if (err < 0)
> -               return err;
> +       clk = devm_clk_get_enabled(&pdev->dev, NULL);
> +       if (IS_ERR(clk))
> +               return PTR_ERR(clk);
>
>         err = mvneta_bm_get_sram(dn, priv);
>         if (err < 0) {
>                 dev_err(&pdev->dev, "failed to allocate internal memory\n");
> -               goto err_clk;
> +               return err;
>         }
>
>         priv->pdev = pdev;
> @@ -452,8 +450,6 @@ static int mvneta_bm_probe(struct platform_device *pdev)
>
>  err_sram:
>         mvneta_bm_put_sram(priv);
> -err_clk:
> -       clk_disable_unprepare(priv->clk);
>         return err;
>  }
>
> @@ -473,8 +469,6 @@ static void mvneta_bm_remove(struct platform_device *pdev)
>
>         /* Dectivate BM unit */
>         mvneta_bm_write(priv, MVNETA_BM_COMMAND_REG, MVNETA_BM_STOP_MASK);
> -
> -       clk_disable_unprepare(priv->clk);
>  }
>
>  static const struct of_device_id mvneta_bm_match[] = {
> diff --git a/drivers/net/ethernet/marvell/mvneta_bm.h b/drivers/net/ethernet/marvell/mvneta_bm.h
> index e47783ce77e0..396dced914aa 100644
> --- a/drivers/net/ethernet/marvell/mvneta_bm.h
> +++ b/drivers/net/ethernet/marvell/mvneta_bm.h
> @@ -94,7 +94,6 @@ enum mvneta_bm_type {
>
>  struct mvneta_bm {
>         void __iomem *reg_base;
> -       struct clk *clk;
>         struct platform_device *pdev;
>
>         struct gen_pool *bppi_pool;
> --
> 2.39.0
>

Re: [net-next v2 3/9] net: ethernet: cortina: Convert to devm_clk_get_enabled()

[Linus Walleij]

On Fri, Aug 23, 2024 at 9:06 AM Yangtao Li <frank.li@vivo.com> wrote:

> Convert devm_clk_get(), clk_prepare_enable() to a single
> call to devm_clk_get_enabled(), as this is exactly
> what this function does.
>
> Signed-off-by: Yangtao Li <frank.li@vivo.com>
> Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>

Reviewed-by: Linus Walleij <linus.walleij@linaro.org>

Yours,
Linus Walleij

Re: [net-next v2 6/9] net: ethernet: broadcom: bcm63xx_enet: Convert to devm_clk_get_enabled()

[Jakub Kicinski]

On Fri, 23 Aug 2024 01:21:18 -0600 Yangtao Li wrote:
> diff --git a/drivers/net/ethernet/broadcom/bcm63xx_enet.c b/drivers/net/ethernet/broadcom/bcm63xx_enet.c
> index 3c0e3b9828be..6e288cee2c35 100644
> --- a/drivers/net/ethernet/broadcom/bcm63xx_enet.c
> +++ b/drivers/net/ethernet/broadcom/bcm63xx_enet.c
> @@ -1718,6 +1718,7 @@ static int bcm_enet_probe(struct platform_device *pdev)
>  	struct bcm63xx_enet_platform_data *pd;

move the local clock variables here, keep lines longest to shortest

>  	int irq, irq_rx, irq_tx;
>  	struct mii_bus *bus;
> +	struct clk *phy_clk, *mac_clk;

Re: [net-next v2 3/9] net: ethernet: cortina: Convert to devm_clk_get_enabled()

[Jakub Kicinski]

On Fri, 23 Aug 2024 01:21:15 -0600 Yangtao Li wrote:
> @@ -2403,6 +2401,7 @@ static int gemini_ethernet_port_probe(struct platform_device *pdev)
>  	struct device *parent;

move the local clock variables here, keep lines longest to shortest

>  	u8 mac[ETH_ALEN];
>  	unsigned int id;
> +	struct clk *pclk;
>  	int irq;
>  	int ret;

Re: [net-next v2 1/9] net: stmmac: dwmac-intel-plat: Convert to devm_clk_get_enabled()

[Simon Horman]

On Fri, Aug 23, 2024 at 01:21:13AM -0600, Yangtao Li wrote:
> Convert devm_clk_get(), clk_prepare_enable() to a single
> call to devm_clk_get_enabled(), as this is exactly
> what this function does.
> 
> Signed-off-by: Yangtao Li <frank.li@vivo.com>
> Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
> ---
>  .../net/ethernet/stmicro/stmmac/dwmac-intel-plat.c    | 11 ++---------
>  1 file changed, 2 insertions(+), 9 deletions(-)
> 
> diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-intel-plat.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-intel-plat.c
> index d68f0c4e7835..dcbae653ab8c 100644
> --- a/drivers/net/ethernet/stmicro/stmmac/dwmac-intel-plat.c
> +++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-intel-plat.c
> @@ -104,12 +104,10 @@ static int intel_eth_plat_probe(struct platform_device *pdev)
>  
>  		/* Enable TX clock */
>  		if (dwmac->data->tx_clk_en) {
> -			dwmac->tx_clk = devm_clk_get(&pdev->dev, "tx_clk");
> +			dwmac->tx_clk = devm_clk_get_enabled(&pdev->dev, "tx_clk");

As it looks like there will be a v3 anyway, a minor nit from my side:
IMHO, the line above could be trivially wrapped to keep it <= 80 columns wide,
which is still preferred by Networking code.

>  			if (IS_ERR(dwmac->tx_clk))
>  				return PTR_ERR(dwmac->tx_clk);
>  
> -			clk_prepare_enable(dwmac->tx_clk);
> -
>  			/* Check and configure TX clock rate */
>  			rate = clk_get_rate(dwmac->tx_clk);
>  			if (dwmac->data->tx_clk_rate &&
> @@ -149,20 +147,15 @@ static int intel_eth_plat_probe(struct platform_device *pdev)
>  	}
>  
>  	ret = stmmac_dvr_probe(&pdev->dev, plat_dat, &stmmac_res);
> -	if (ret) {
> -		clk_disable_unprepare(dwmac->tx_clk);
> +	if (ret)
>  		return ret;
> -	}
>  
>  	return 0;
>  }
>  
>  static void intel_eth_plat_remove(struct platform_device *pdev)
>  {
> -	struct intel_dwmac *dwmac = get_stmmac_bsp_priv(&pdev->dev);
> -
>  	stmmac_pltfr_remove(pdev);
> -	clk_disable_unprepare(dwmac->tx_clk);
>  }
>  
>  static struct platform_driver intel_eth_plat_driver = {
> -- 
> 2.39.0
>