From: Sasha Levin <sashal@kernel.org>
To: linux-kernel@vger.kernel.org, stable@vger.kernel.org
Cc: Jacky Chou <jacky_chou@aspeedtech.com>,
"David S . Miller" <davem@davemloft.net>,
Sasha Levin <sashal@kernel.org>,
edumazet@google.com, kuba@kernel.org, pabeni@redhat.com,
u.kleine-koenig@pengutronix.de, netdev@vger.kernel.org
Subject: [PATCH AUTOSEL 6.6 12/20] net: ftgmac100: Ensure tx descriptor updates are visible
Date: Tue, 3 Sep 2024 15:23:44 -0400 [thread overview]
Message-ID: <20240903192425.1107562-12-sashal@kernel.org> (raw)
In-Reply-To: <20240903192425.1107562-1-sashal@kernel.org>
From: Jacky Chou <jacky_chou@aspeedtech.com>
[ Upstream commit 4186c8d9e6af57bab0687b299df10ebd47534a0a ]
The driver must ensure TX descriptor updates are visible
before updating TX pointer and TX clear pointer.
This resolves TX hangs observed on AST2600 when running
iperf3.
Signed-off-by: Jacky Chou <jacky_chou@aspeedtech.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/net/ethernet/faraday/ftgmac100.c | 26 ++++++++++++++++--------
1 file changed, 18 insertions(+), 8 deletions(-)
diff --git a/drivers/net/ethernet/faraday/ftgmac100.c b/drivers/net/ethernet/faraday/ftgmac100.c
index 9135b918dd490..848e41a4b1dbb 100644
--- a/drivers/net/ethernet/faraday/ftgmac100.c
+++ b/drivers/net/ethernet/faraday/ftgmac100.c
@@ -572,7 +572,7 @@ static bool ftgmac100_rx_packet(struct ftgmac100 *priv, int *processed)
(*processed)++;
return true;
- drop:
+drop:
/* Clean rxdes0 (which resets own bit) */
rxdes->rxdes0 = cpu_to_le32(status & priv->rxdes0_edorr_mask);
priv->rx_pointer = ftgmac100_next_rx_pointer(priv, pointer);
@@ -656,6 +656,11 @@ static bool ftgmac100_tx_complete_packet(struct ftgmac100 *priv)
ftgmac100_free_tx_packet(priv, pointer, skb, txdes, ctl_stat);
txdes->txdes0 = cpu_to_le32(ctl_stat & priv->txdes0_edotr_mask);
+ /* Ensure the descriptor config is visible before setting the tx
+ * pointer.
+ */
+ smp_wmb();
+
priv->tx_clean_pointer = ftgmac100_next_tx_pointer(priv, pointer);
return true;
@@ -809,6 +814,11 @@ static netdev_tx_t ftgmac100_hard_start_xmit(struct sk_buff *skb,
dma_wmb();
first->txdes0 = cpu_to_le32(f_ctl_stat);
+ /* Ensure the descriptor config is visible before setting the tx
+ * pointer.
+ */
+ smp_wmb();
+
/* Update next TX pointer */
priv->tx_pointer = pointer;
@@ -829,7 +839,7 @@ static netdev_tx_t ftgmac100_hard_start_xmit(struct sk_buff *skb,
return NETDEV_TX_OK;
- dma_err:
+dma_err:
if (net_ratelimit())
netdev_err(netdev, "map tx fragment failed\n");
@@ -851,7 +861,7 @@ static netdev_tx_t ftgmac100_hard_start_xmit(struct sk_buff *skb,
* last fragment, so we know ftgmac100_free_tx_packet()
* hasn't freed the skb yet.
*/
- drop:
+drop:
/* Drop the packet */
dev_kfree_skb_any(skb);
netdev->stats.tx_dropped++;
@@ -1344,7 +1354,7 @@ static void ftgmac100_reset(struct ftgmac100 *priv)
ftgmac100_init_all(priv, true);
netdev_dbg(netdev, "Reset done !\n");
- bail:
+bail:
if (priv->mii_bus)
mutex_unlock(&priv->mii_bus->mdio_lock);
if (netdev->phydev)
@@ -1543,15 +1553,15 @@ static int ftgmac100_open(struct net_device *netdev)
return 0;
- err_ncsi:
+err_ncsi:
napi_disable(&priv->napi);
netif_stop_queue(netdev);
- err_alloc:
+err_alloc:
ftgmac100_free_buffers(priv);
free_irq(netdev->irq, netdev);
- err_irq:
+err_irq:
netif_napi_del(&priv->napi);
- err_hw:
+err_hw:
iowrite32(0, priv->base + FTGMAC100_OFFSET_IER);
ftgmac100_free_rings(priv);
return err;
--
2.43.0
next parent reply other threads:[~2024-09-03 20:44 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <20240903192425.1107562-1-sashal@kernel.org>
2024-09-03 19:23 ` Sasha Levin [this message]
2024-09-03 19:23 ` [PATCH AUTOSEL 6.6 19/20] wifi: mac80211: free skb on error path in ieee80211_beacon_get_ap() Sasha Levin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20240903192425.1107562-12-sashal@kernel.org \
--to=sashal@kernel.org \
--cc=davem@davemloft.net \
--cc=edumazet@google.com \
--cc=jacky_chou@aspeedtech.com \
--cc=kuba@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=netdev@vger.kernel.org \
--cc=pabeni@redhat.com \
--cc=stable@vger.kernel.org \
--cc=u.kleine-koenig@pengutronix.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).