From: Rosen Penev <rosenp@gmail.com>
To: netdev@vger.kernel.org
Cc: davem@davemloft.net, edumazet@google.com, kuba@kernel.org,
pabeni@redhat.com, linux-kernel@vger.kernel.org,
jacob.e.keller@intel.com, horms@kernel.org, sd@queasysnail.net,
chunkeey@gmail.com
Subject: [PATCHv3 net-next 6/9] net: ibm: emac: use netdev's phydev directly
Date: Thu, 5 Sep 2024 13:15:03 -0700 [thread overview]
Message-ID: <20240905201506.12679-7-rosenp@gmail.com> (raw)
In-Reply-To: <20240905201506.12679-1-rosenp@gmail.com>
Avoids having to use own struct member.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
---
drivers/net/ethernet/ibm/emac/core.c | 47 +++++++++++++---------------
drivers/net/ethernet/ibm/emac/core.h | 3 --
2 files changed, 21 insertions(+), 29 deletions(-)
diff --git a/drivers/net/ethernet/ibm/emac/core.c b/drivers/net/ethernet/ibm/emac/core.c
index e2abda947a51..cda368701ae4 100644
--- a/drivers/net/ethernet/ibm/emac/core.c
+++ b/drivers/net/ethernet/ibm/emac/core.c
@@ -2459,7 +2459,7 @@ static int emac_read_uint_prop(struct device_node *np, const char *name,
static void emac_adjust_link(struct net_device *ndev)
{
struct emac_instance *dev = netdev_priv(ndev);
- struct phy_device *phy = dev->phy_dev;
+ struct phy_device *phy = ndev->phydev;
dev->phy.autoneg = phy->autoneg;
dev->phy.speed = phy->speed;
@@ -2510,22 +2510,20 @@ static int emac_mdio_phy_start_aneg(struct mii_phy *phy,
static int emac_mdio_setup_aneg(struct mii_phy *phy, u32 advertise)
{
struct net_device *ndev = phy->dev;
- struct emac_instance *dev = netdev_priv(ndev);
phy->autoneg = AUTONEG_ENABLE;
phy->advertising = advertise;
- return emac_mdio_phy_start_aneg(phy, dev->phy_dev);
+ return emac_mdio_phy_start_aneg(phy, ndev->phydev);
}
static int emac_mdio_setup_forced(struct mii_phy *phy, int speed, int fd)
{
struct net_device *ndev = phy->dev;
- struct emac_instance *dev = netdev_priv(ndev);
phy->autoneg = AUTONEG_DISABLE;
phy->speed = speed;
phy->duplex = fd;
- return emac_mdio_phy_start_aneg(phy, dev->phy_dev);
+ return emac_mdio_phy_start_aneg(phy, ndev->phydev);
}
static int emac_mdio_poll_link(struct mii_phy *phy)
@@ -2534,20 +2532,19 @@ static int emac_mdio_poll_link(struct mii_phy *phy)
struct emac_instance *dev = netdev_priv(ndev);
int res;
- res = phy_read_status(dev->phy_dev);
+ res = phy_read_status(ndev->phydev);
if (res) {
dev_err(&dev->ofdev->dev, "link update failed (%d).", res);
return ethtool_op_get_link(ndev);
}
- return dev->phy_dev->link;
+ return ndev->phydev->link;
}
static int emac_mdio_read_link(struct mii_phy *phy)
{
struct net_device *ndev = phy->dev;
- struct emac_instance *dev = netdev_priv(ndev);
- struct phy_device *phy_dev = dev->phy_dev;
+ struct phy_device *phy_dev = ndev->phydev;
int res;
res = phy_read_status(phy_dev);
@@ -2564,10 +2561,9 @@ static int emac_mdio_read_link(struct mii_phy *phy)
static int emac_mdio_init_phy(struct mii_phy *phy)
{
struct net_device *ndev = phy->dev;
- struct emac_instance *dev = netdev_priv(ndev);
- phy_start(dev->phy_dev);
- return phy_init_hw(dev->phy_dev);
+ phy_start(ndev->phydev);
+ return phy_init_hw(ndev->phydev);
}
static const struct mii_phy_ops emac_dt_mdio_phy_ops = {
@@ -2622,26 +2618,28 @@ static int emac_dt_mdio_probe(struct emac_instance *dev)
static int emac_dt_phy_connect(struct emac_instance *dev,
struct device_node *phy_handle)
{
+ struct phy_device *phy_dev;
+
dev->phy.def = devm_kzalloc(&dev->ofdev->dev, sizeof(*dev->phy.def),
GFP_KERNEL);
if (!dev->phy.def)
return -ENOMEM;
- dev->phy_dev = of_phy_connect(dev->ndev, phy_handle, &emac_adjust_link,
+ phy_dev = of_phy_connect(dev->ndev, phy_handle, &emac_adjust_link,
0, dev->phy_mode);
- if (!dev->phy_dev) {
+ if (!phy_dev) {
dev_err(&dev->ofdev->dev, "failed to connect to PHY.\n");
return -ENODEV;
}
- dev->phy.def->phy_id = dev->phy_dev->drv->phy_id;
- dev->phy.def->phy_id_mask = dev->phy_dev->drv->phy_id_mask;
- dev->phy.def->name = dev->phy_dev->drv->name;
+ dev->phy.def->phy_id = phy_dev->drv->phy_id;
+ dev->phy.def->phy_id_mask = phy_dev->drv->phy_id_mask;
+ dev->phy.def->name = phy_dev->drv->name;
dev->phy.def->ops = &emac_dt_mdio_phy_ops;
ethtool_convert_link_mode_to_legacy_u32(&dev->phy.features,
- dev->phy_dev->supported);
- dev->phy.address = dev->phy_dev->mdio.addr;
- dev->phy.mode = dev->phy_dev->interface;
+ phy_dev->supported);
+ dev->phy.address = phy_dev->mdio.addr;
+ dev->phy.mode = phy_dev->interface;
return 0;
}
@@ -2695,11 +2693,11 @@ static int emac_init_phy(struct emac_instance *dev)
return res;
res = of_phy_register_fixed_link(np);
- dev->phy_dev = of_phy_find_device(np);
- if (res || !dev->phy_dev)
+ ndev->phydev = of_phy_find_device(np);
+ if (res || !ndev->phydev)
return res ? res : -EINVAL;
emac_adjust_link(dev->ndev);
- put_device(&dev->phy_dev->mdio.dev);
+ put_device(&ndev->phydev->mdio.dev);
}
return 0;
}
@@ -3254,9 +3252,6 @@ static void emac_remove(struct platform_device *ofdev)
if (emac_has_feature(dev, EMAC_FTR_HAS_ZMII))
zmii_detach(dev->zmii_dev, dev->zmii_port);
- if (dev->phy_dev)
- phy_disconnect(dev->phy_dev);
-
busy_phy_map &= ~(1 << dev->phy.address);
DBG(dev, "busy_phy_map now %#x" NL, busy_phy_map);
diff --git a/drivers/net/ethernet/ibm/emac/core.h b/drivers/net/ethernet/ibm/emac/core.h
index f4bd4cd8ac4a..b820a4f6e8c7 100644
--- a/drivers/net/ethernet/ibm/emac/core.h
+++ b/drivers/net/ethernet/ibm/emac/core.h
@@ -188,9 +188,6 @@ struct emac_instance {
struct emac_instance *mdio_instance;
struct mutex mdio_lock;
- /* Device-tree based phy configuration */
- struct phy_device *phy_dev;
-
/* ZMII infos if any */
u32 zmii_ph;
u32 zmii_port;
--
2.46.0
next prev parent reply other threads:[~2024-09-05 20:15 UTC|newest]
Thread overview: 23+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-09-05 20:14 [PATCHv3 net-next 0/9] net: ibm: emac: modernize a bit Rosen Penev
2024-09-05 20:14 ` [PATCHv3 net-next 1/9] net: ibm: emac: use devm for alloc_etherdev Rosen Penev
2024-09-05 21:16 ` Andrew Lunn
2024-09-05 20:14 ` [PATCHv3 net-next 2/9] net: ibm: emac: manage emac_irq with devm Rosen Penev
2024-09-05 21:17 ` Andrew Lunn
2024-09-05 20:15 ` [PATCHv3 net-next 3/9] net: ibm: emac: use devm for of_iomap Rosen Penev
2024-09-05 21:17 ` Andrew Lunn
2024-09-05 20:15 ` [PATCHv3 net-next 4/9] net: ibm: emac: remove mii_bus with devm Rosen Penev
2024-09-05 21:19 ` Andrew Lunn
2024-09-05 20:15 ` [PATCHv3 net-next 5/9] net: ibm: emac: use devm for register_netdev Rosen Penev
2024-09-05 21:19 ` Andrew Lunn
2024-09-05 20:15 ` Rosen Penev [this message]
2024-09-05 21:21 ` [PATCHv3 net-next 6/9] net: ibm: emac: use netdev's phydev directly Andrew Lunn
2024-09-07 19:32 ` Christophe JAILLET
2024-09-07 19:58 ` Rosen Penev
2024-09-05 20:15 ` [PATCHv3 net-next 7/9] net: ibm: emac: replace of_get_property Rosen Penev
2024-09-05 21:22 ` Andrew Lunn
2024-09-05 20:15 ` [PATCHv3 net-next 8/9] net: ibm: emac: remove all waiting code Rosen Penev
2024-09-05 20:15 ` [PATCHv3 net-next 9/9] net: ibm: emac: get rid of wol_irq Rosen Penev
2024-09-05 21:27 ` Andrew Lunn
2024-09-05 22:28 ` Rosen Penev
2024-09-07 18:29 ` kernel test robot
2024-09-07 23:11 ` kernel test robot
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20240905201506.12679-7-rosenp@gmail.com \
--to=rosenp@gmail.com \
--cc=chunkeey@gmail.com \
--cc=davem@davemloft.net \
--cc=edumazet@google.com \
--cc=horms@kernel.org \
--cc=jacob.e.keller@intel.com \
--cc=kuba@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=netdev@vger.kernel.org \
--cc=pabeni@redhat.com \
--cc=sd@queasysnail.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).